Potential use of red hibiscus flower extract for the production of spray-chilled microparticles: Characterization, stability, and bioaccessibility in vitro of anthocyanins.

Microparticles (MLP) containing red hibiscus flower (Hibiscus rosa-sinensis) anthocyanins were produced by spray chilling, and characterized for physicochemical parameters, accelerated stability, and gastrointestinal release profile. Fully hydrogenated palm oil and cocoa butter were used as wall materials, at a lipid blend to hibiscus extract ratio of 70:30 (w/w). The lipid blends containing fully hydrogenated palm oil (FHPO) and cocoa butter (CB) were produced by ultrasound-assisted technique in the following FHPO to CB ratios: 100:0 (Control), 75:25, 50:50, 60:40, and 40:60. Increasing the cocoa butter content reduced the melting temperature and increased the unstable polymorphic behavior of the microparticles, resulting in amorphous characteristics. The microparticles exhibited higher viscosity, more agglomerates, and holes on the surface, and greater diameters. Characteristic peaks corresponding to the hibiscus extract were observed in the infrared spectra of the spray-chilled microparticles, indicating that the microencapsulation did not affect the anthocyanins. The antioxidant capacity of the red hibiscus anthocyanins ranged from 75 % to 79 %, with the best result observed for the treatment MLP_75:25. Higher antioxidant activities were observed for the lipid blends containing lower cocoa butter concentrations. Concerning the release profile of anthocyanins, the simulated GI digestion in vitro showed reduced release in the gastric tract and more intense release in the intestinal tract for an effective absorption of the antioxidant compounds in the small intestine. Furthermore, the treatment MLP_75:25 showed the highest encapsulation retention and lower total color difference in the accelerated stability study. Overall, the microparticles from all treatments were light-sensitive and thermosensitive at 35 °C. Thus, it is recommended to store the particles in a dark environment at temperatures below 35 °C for an effective use of the microparticles as natural food colorants.

Microstructured lipid microparticles containing anthocyanins: Production, characterization, storage, and resistance to the gastrointestinal tract.

Anthocyanins from grape peel extract have several biological properties and can act as a natural colorant and antioxidant agent. However, these compounds are susceptible to degradation by light, oxygen, temperature, and the gastrointestinal tract. Thus, this study produced microstructured lipid microparticles (MLMs) containing anthocyanins by the spray chilling technique and evaluated the particle stability. trans-free fully hydrogenated palm oil (FHPO) and palm oil (PO) were used as encapsulating materials in the ratios 90:10, 80:20, 70:30, 60:40, and 50:50, respectively. The concentration of grape peel extract was 40 % (w/w) in relation to the encapsulating materials. The microparticles were evaluated for thermal behavior by DSC, polymorphism, FTIR, size distribution and particle diameter, bulk density, tapped density, flow properties, morphology, phenolic compounds content, antioxidant capacity, and retention of anthocyanins. Furthermore, the storage stability of the microparticles was investigated at different temperatures (-18, 4, and 25 °C), and the anthocyanins retention capacity, kinetic parameters (half-life time and degradation constant rate), total color difference, and visual aspects were evaluated during 90 days of storage. The resistance of MLMs to the gastrointestinal tract was also evaluated. In general, higher FHPO concentrations increased the thermal resistance of the MLMs and both showed defined peaks of ß' and ß forms. The FTIR analysis showed that the MLMs preserved the original forms of their constituent materials even after atomization, with interactions between them. The increase in the PO concentration directly affected the increased mean particle diameter, agglomeration, and cohesiveness, as well as lower bulk density, tapped density, and flowability. The retention of anthocyanins in MLMs ranged from 81.5 to 61.3 % and was influenced by the particle size, with a better result observed for the treatment MLM_90:10. The same behavior was observed for the phenolic compounds content (1443.1-1247.2 mg GAE/100 g) and antioxidant capacity (1739.8-1660.6 mg TEAC/100 g). During the storage, MLMs made with FHPO to PO ratios of 80:20, 70:30, and 60:40 showed the highest stability for anthocyanin retention and color changes at the three temperatures (- 18 °C, 4 °C, and 25 °C). The gastrointestinal simulation in vitro revealed that all treatments were resistant to gastric phase and maintained a maximum and controlled release in the intestinal phase, demonstrating that FHPO together with PO are effective to protect anthocyanins during gastric digestion, and can improve the bioavailability of this compound in the human organism. Thus, the spray chilling technique may be a promising alternative for the production of anthocyanins-loaded microstructured lipid microparticles with functional properties for various technological applications.

Microencapsulation of ß-carotene using barley residue proteins from beer waste as coating material.

This study aimed to produce and characterise microparticles produced from barley residue proteins (BRP) enriched with ß-carotene. The microparticles were obtained by freeze-drying five emulsion formulations with 0.5% w/w whey protein concentrate and different concentrations of maltodextrin and BRP (0, 1.5, 3.0, 4.5 and 6.0% w/w), with the dispersed phase consisting of corn oil enriched with ß-carotene. The mixtures were mechanically mixed and sonicated, the formed emulsions were freeze-drying. The microparticles obtained were tested for encapsulation efficiency, humidity, hygroscopicity, apparent density, scanning electron microscopy (SEM), accelerated stability and bioaccessibility. Microparticles produced with the emulsion containing 6% w/w BRP had lower moisture content (3.47 ± 0.05%), higher encapsulation efficiency (69.11 ± 3.36%), bioaccessibility value of 84.1% and greater ß-carotene protection against thermal degradation. SEM analysis showed that microparticles had sizes ranging from 74.4 to 244.8 µm. These results show that BRP are viable for the microencapsulation of bioactive compounds by freeze-drying.

Microencapsulation by spray chilling in the food industry: Opportunities, challenges, and innovations.

Background: The increasing demand for healthy eating habits and the emergence of the COVID-19 pandemic, which resulted in a health crisis and global economic slowdown, has led to the consumption of functional and practical foods. Bioactive ingredients can be an alternative for healthy food choices; however, most functional compounds are sensitive to the adverse conditions of processing and digestive tract, impairing its use in food matrices, and industrial-scale applications. Microencapsulation by spray chilling can be a viable alternative to reduce these barriers in food processing. Scope and approach: This review discusses the use of spray chilling technique for microencapsulation of bioactive food ingredients. Although this technology is known in the pharmaceutical industry, it has been little exploited in the food sector. General aspects of spray chilling, the process parameters, advantages, and disadvantages are addressed. The feasibility and stability of encapsulated bioactive ingredients in food matrices and the bioavailability in vitro of solid lipid microparticles produced by spray chilling are also discussed. Main findings and conclusions: Research on the microencapsulation of bioactive ingredients by spray chilling for use in foods has shown the effectiveness of this technique to encapsulate bioactive compounds for application in food matrices. Solid microparticles produced by spray chilling can improve the stability and bioavailability of bioactive ingredients. However, further studies are required, including the use of lipid-based encapsulating agents, process parameters, and novel formulations for application in food, beverages, and packaging, as well as in vivo studies to prove the effectiveness of the formulations.

Effect of Microencapsulation on Chemical Composition and Antimicrobial, Antioxidant and Cytotoxic Properties of Lemongrass (Cymbopogon flexuosus) Essential Oil.

Research background: Lemongrass (Cymbopogon flexuosus) essential oil exhibits antimicrobial and antioxidant properties due to the presence of α-citral and ß-citral. Essential oils are susceptible to volatilization and oxidation when applied to food matrices. Therefore, a barrier is needed to protect this material. The present study aims to produce microparticles containing lemongrass essential oil, with gum arabic and maltodextrin using spray drying technology. Experimental approach: Lemongrass essential oil was extracted by the hydrodistillation method and later microencapsulated with different wall materials. Free and microencapsulated lemongrass essential oil was evaluated for the cytotoxic activity (using Artemia salina as test sample), chemical composition (GC-MS), encapsulation efficiency, antioxidant activity (DPPH, ABTS and FRAP), antimicrobial activity and minimum inhibitory concentration. Results and conclusions: The lethal concentration (LC50) of lemongrass essential oil in the cytotoxic test was 8.43 µg/mL against Artemia salina; a high activity that can be associated with the presence of α-citral (~33%) and ß-citral (~21%) in the samples, since these were the main compounds with bioactive properties. The highest value of microencapsulation efficiency (88.11%) was obtained when only gum arabic was used as wall material. In general, the microparticles showed satisfactory antioxidant activity (expressed as Trolox equivalents, between 348.66 and 2042.30 µmol/100 g) and bactericidal effect in vitro against Gram-positive and Gram-negative microorganisms. In conclusion, the microencapsulated lemongrass essential oil is a promising functional additive in the food and pharmaceutical industries. Novelty and scientific contribution: This study shows that microparticles containing lemongrass essential oil can be prepared using gum arabic and maltodextrin as wall materials by spray drying, resulting in high microencapsulation efficiency. The drying process maintained the antimicrobial and antioxidant properties of the essential oil. Therefore, the microencapsulated lemongrass essential oil is considered a natural, functional and promising additive in the food industry. Its antimicrobial action can increase the shelf life of fresh and semi-fresh products such as cheese, yogurts and meat products. In addition, its antioxidant action can delay the lipid and protein oxidation in food products.

Development of alginate/pectin microcapsules by a dual process combining emulsification and ultrasonic gelation for encapsulation and controlled release of anthocyanins from grapes (Vitis labrusca L.).

The aim of this study was to investigate the physicochemical, morphological, and gastrointestinal release properties of an anthocyanin-rich extract of grapes in alginate and pectin beads as carriers; the effects of ultrasonic gelation combined with emulsification were also investigated. In general, the alginate beads showed smaller size and more regular shape compared to pectin. The effect of emulsification combined with ionic gelation was more pronounced in the alginate beads and resulted in higher retention of anthocyanins, higher antioxidant capacity, and also allowed the best release profile during intestinal digestion. Thus, the simultaneous strategy could be an interesting delivery system and enhance the release of anthocyanins, providing an opportunity for the development of ingredients with different bioactive properties.

Influence of modified starches as wall materials on the properties of spray-dried lemongrass oil.

The use of lemongrass oil as food preservative present great potential, however it has high volatility and intense aroma, making them limited to be used as food additives. Microencapsulation processes become interesting alternatives to overcome these issues. This work investigated the influence of the partial replacement of gum arabic by modified starches on the microencapsulation of lemongrass oil as core material. Gum arabic and its combinations with modified starches: cassava and corn maltodextrins with different dextrose equivalent (DE) and octenyl succinic anhydride modified starch (OSA-starch) were studied. The emulsions were spray dried at controlled temperature of 170 °C. The evaluated parameters particles solubility, moisture content, and oil composition did not showed significant differences among the treatments. Replacement of gum arabic by maltodextrin DE20 and OSA-starch resulted in higher wetting times. Oil retention was increased (81.2%) when gum arabic was replaced by OSA-starch; the treatment without substitution, with only gum arabic had 67.5% of oil retention. Application of OSA-starch in association with gum arabic in microencapsulation by spray drying of lemongrass oil presented greater potential to be used due to its higher oil retention. Polymer blends should be assessed since they present advantages over individually applied polymers. Although maltodextrins show some differences compared to the treatment with only gum arabic, it may also be a viable alternative because of its lower cost.

Ultrasound-assisted oil-in-water nanoemulsion produced from Pereskia aculeata Miller mucilage.

For the preparation of nanoemulsions, the correct choice of emulsifiers, together with the emulsification methods, directly influences the final product quality. The present study reports the ultrasound-assisted preparation of oil-in-water nanoemulsions produced with mucilage extracted from leaves of Pereskia aculeata Miller (ora-pro-nobis; OPN). The OPN mucilage (%) and soybean oil (%) concentration range, and the process operating parameters, ultrasonic power amplitude (%) and sonication time (min), were optimized based on the mean droplet diameter (d32). The effect of the mucilage and oil concentrations was also investigated by the response variables such as polydispersity, density, turbidity, viscosity, zeta-potential, and interfacial tension. The higher OPN mucilage concentrations (%) with lower amounts of soybean oil (%) favored nanoemulsion formations (116 ≤ d32 ≤ 171 nm) and increased polydispersity, density, and zeta-potential. On increasing OPN mucilage and soybean oil the turbidity of the dispersions increased. All colloidal systems showed Newtonian behavior, and the viscosity in the systems increased due to the greater OPN mucilage concentration in the aqueous phase at a certain oil concentration. In addition, lower values of equilibrium interfacial tension were found with increasing OPN mucilage concentrations. Finally, from the stability test, it can be pointed out that the OPN mucilage concentration should be between 1.0 and 1.5% and the oil concentration should be less than 5%, so that lower d32 values are maintained over time. Therefore, mucilage extracted from OPN and the ultrasound technique can be used in the preparation of nanoemulsions.

Stability of lime essential oil microparticles produced with protein-carbohydrate blends.

The objective of this work was to analyze the influence of maltodextrin equivalent dextrose on the lime essential oil reconstitution, storage, release and protection properties. Four treatments were evaluated: whey protein concentrate (WPC), and blends of maltodextrin with dextrose equivalents of 5 (WM5), 10 (WM10) and 20 (WM20). The reconstitution and storage properties of the microparticles (solubility, wettability and density), water kinetics adsorption, sorption isotherms, thermogravimetric properties, controlled release and degradation kinetics of encapsulated lime essential oil were studied to measure the quality of the encapsulated materials. The results of the study indicated that the DE degree influences the characteristics of reconstitution, storage, controlled release and degradation characteristics of encapsulated bioactive compounds. The increase in dextrose equivalent improves microparticle solubility, wettability and density, mainly due to the size of the maltodextrin molecules. The adsorption kinetics and sorption isotherm curves confirmed the increase in the hygroscopicity of maltodextrins with higher degrees of polymerization. The size of the maltodextrin chains influenced the release and protection of the encapsulated lime essential oil. Finally, the maltodextrin polymerization degree can be considered a parameter that will influence the physicochemical properties of microencapsulated food.

Stability of spray-dried beetroot extract using oligosaccharides and whey proteins.

The properties and stability of spray-dried beetroot extract using maltodextrin (MD), inulin (IN), and whey protein isolate (WPI) as carrier agents were evaluated. The values of moisture, betalains content, and retention were 3.33-4.24%, 348.79-385.47 mg/100 g (dry-basis), and 88.45-95.69%, respectively. Higher values of antioxidant activity were observed for the treatments using WPI. The treatment with inulin alone presented higher hygroscopicity in the moisture adsorption isotherms at 25 °C and lower thermal stability when evaluating the thermogravimetric curves. When stored at 60 °C, the use of WPI alone conferred lower stability to the beetroot extract powder. In general, the simultaneous use of IN and WPI as carrier agents resulted in good stability of the beetroot extract powder, representing an opportunity for innovation in food products.

Can lychee reducing the adipose tissue mass in rats?

ABSTRACT Lychee fruit has been studied owing to the presence of several bioactive compounds that can contribute to weight loss in obese individuals. However, the anti-obese potential of the fruit has not been explored yet. The aim of this study was to investigate the effect of different parts of lychee in reducing the adipose tissue mass of cafeteria diet-fed rats. Phenolic compounds and scavenging capacities were quantified. The food intake, apparent digestibility, weight of the body and liver, body mass, Lee Index, and the mass of epididymal and visceral adipose tissues were evaluated. The results were estimated by Tukey's Test at 5% probability. A higher amount of phenolic compounds and scavenging capacity were observed in the peel of lychee as compared to the other parts of the fruit. The hypercaloric diet with lychee flour resulted in a higher apparent digestibility. There was no difference between groups control (C), hypercaloric (H), hypercaloric with lychee flour - 50.00% peel and 50.00% seeds (H2F), and hypercaloric with lychee flour - 33.33% peel, 33.33% pulp and 33.34% seeds (H3F) with respect to body and liver weight, corporal mass, and Lee Index. The hypercaloric diet-fed group exhibited an increase in visceral and epididymal adipose tissue mass, whereas the group fed with hypercaloric diets and flour made from the peel and seed of lychee presented a lower visceral adipose tissue mass. In conclusion, the use of lychee flour was considered viable because it decreased visceral adipose tissue mass in rats.

Properties of spray-dried fish oil with different carbohydrates as carriers.

This study evaluated the application of cashew gum, Arabic gum and starch on physical and thermal properties, and fatty acid profiles of spray-dried fish oil. A completely randomized design was used to evaluate the influence of the type of material on the properties of the microparticles. Hygroscopicity and solubility was higher for particles produced using cashew gum and reached 15 g/100 g and 85 g/100 g, respectively. Analyzing the thermogravimetric curves, it was found that cashew gum bulk showed two steps of degradation. For the microcapsules containing encapsulated fish oil in cashew gum, an extra degradation step at 471 °C was found. It was possible to verify the occurrence of diffused and wide peaks in the X-ray diffractograms for all three carbohydrate polymers. The particles produced presented spherical shape with cavities. The fatty acid profile for the fish oil changed only when using modified starch as wall material, where a significant loss of omega-3 fatty acids was observed. The particles produced with cashew gum had physical properties similar to those when applying materials commonly used and this biopolymer has the potential for application as a carrier in spray drying processes .

Use of prebiotic carbohydrate as wall material on lime essential oil microparticles.

The aim of this work was to study the use of different prebiotic biopolymers in lime essential oil microencapsulation. Whey protein isolate, inulin and oligofructose biopolymers were used. The addition of prebiotic biopolymers reduced emulsion viscosity, although it produced larger droplet sizes (0.31-0.32 µm). Moisture values (2.94-3.13 g/100 g dry solids) and water activity (0.152-0.185) were satisfactory, being within the appropriate range for powdered food quality. Total oil content, limonene retention values and antioxidant activity of the microparticles containing essential oil decreased in the presence of the carbohydrates. The addition of prebiotic biopolymers reduced the microparticle thermal stability. X-ray diffraction confirmed the amorphous characteristic of the microparticles and the interaction of the essential oil with the wall material. The presence of prebiotic biopolymers can be a good alternative for lime essential oil microparticles, mainly using fibre that has a functional food appeal and can improve consumer health.

Application of cashew tree gum on the production and stability of spray-dried fish oil.

Evaluation of cashew gum compared to conventional materials was conducted regarding properties and oxidative stability of spray-dried fish oil. Emulsions produced with cashew gum showed lower viscosity when compared to Arabic gum. The particle size was larger (29.9µm) when cashew gum was used, and the encapsulation efficiency reached 76%, similar to that of modified starch but higher than that for Arabic gum (60%). The oxidation process for the surface oil was conducted and a relative lower formation of oxidation compounds was observed for the cashew gum treatment. GAB model was chosen to describe the moisture adsorption isotherm behaviours. Microparticles produced using Arabic and cashew gums showed greater water adsorption when exposed to higher relative humidities. Microparticles produced using cashew gum were more hygroscopic however encapsulation efficiency were higher and surface oil oxidation were less pronounced. Cashew gum can be further explored as an encapuslant material for spray drying processes.

Prebiotic Carbohydrates: Effect on Reconstitution, Storage, Release, and Antioxidant Properties of Lime Essential Oil Microparticles.

The aim of this study was to include prebiotic biopolymers as wall material in microparticles of lime essential oil. Whey protein isolate (WPI), inulin (IN), and oligofructose (OL) biopolymers were used in the following combinations: WPI, WPI/IN (4:1), and WPI/OL (4:1). The emulsion droplets in the presence of inulin and oligofructose showed larger sizes on reconstitution. There was no significant difference in solubility of the particles, but the wettability was improved on addition of the polysaccharides. The size of the oligofructose chains favored the adsorption of water. Prebiotic biopolymers reduced thermal and chemical stability of the encapsulated oil. Microparticles produced with WPI showed a higher bioactive compound release rate, mainly due to its structural properties, that enabled rapid diffusion of oil through the pores. The use of prebiotic biopolymers can be a good option to add value to encapsulated products, thus promoting health benefits.

Cashew gum and inulin: New alternative for ginger essential oil microencapsulation.

This study aimed to evaluate the effect of partial replacement of cashew gum by inulin used as wall materials, on the characteristics of ginger essential oil microencapsulated by spray drying with ultrasound assisted emulsions. The characterization of particles was evaluated as encapsulation efficiency and particle size. In addition, the properties of the microcapsules were studied through FTIR analysis, adsorption isotherms, thermal gravimetric analysis, X-ray and scanning electron microscopy. It was found that the solubility of the treatments was affected by the composition of the wall material and reached higher values (89.80%) when higher inulin concentrations were applied. The encapsulation efficiency (15.8%) was lower at the highest inulin concentration. The particles presented amorphous characteristics and treatment with cashew gum as encapsulant exhibited the highest water absorption at high water activity. The cashew gum and inulin matrix (3:1(w/w) ratio) showed the best characteristics regarding the encapsulation efficiency and morphology, showing no cracks in the structure.

Gum arabic/starch/maltodextrin/inulin as wall materials on the microencapsulation of rosemary essential oil.

The effects of the partial or total replacement of gum arabic by modified starch, maltodextrin and inulin on the characteristics of rosemary essential oil microencapsulated by spray drying were evaluated in this study. The lowest level of water absorption under conditions of high relative humidity was observed in treatments containing inulin. The wettability property of the powders was improved by the addition of inulin. The total replacement of gum arabic by modified starch or a mixture of modified starch and maltodextrin (1:1, m/m) did not significantly affect the efficiency of encapsulation, although higher Tg values were exhibited by microcapsules prepared using pure gum arabic or gum arabic and inulin. 1,8-cineol, camphor and α-pinene were the main components identified by gas chromatography in the oils extracted from the microcapsules. The particles had smoother surfaces and more folds when gum arabic or inulin was present. Larger particles were observed in the powders prepared with pure gum arabic or modified starch.

Foam mat drying of tomato pulp / Secagem de polpa de tomate pelo método de camada de espuma

The purpose of this study was to optimize the formulation of tomato pulp foam and to evaluate the drying process using the foam mat method at temperatures of 60°C and 80°C. The optimization was conducted by analyzing the effect of the albumin concentration (expressed in %) and whipping time (expressed in minutes) in relation to the response variables of foam density and thermal stability of the foam based on the volume of remaining foam. The drying curves (moisture versus drying time ratio) for the control treatment (CT; no albumin addition) and optimized treatment (OT) were obtained. The results showed that only the whipping time variable (linear and quadratic effects) had significant influence (p < 0.05) on the foam density values. The foam stability was significantly influenced by the whipping time (p < 0.10) and albumin concentration (p < 0.10). The optimum foam formation conditions considering higher foam stability and lower density included a 4.5% albumin concentration and a 4.5 minutes of whipping time. The results of the drying curves showed that the foam formation with albumin significantly reduced (p < 0.05) the time necessary to reach moisture equilibrium during drying. The moisture equilibrium values were not significantly different (p > 0.05) among the treatments with foam application at the studied temperatures, but they were lower than the treatments without foam application.

Este trabalho foi realizado com o objetivo de otimizar a formulação de espuma da polpa de tomate e avaliar o processo de secagem através do método de camada de espuma, nas temperaturas de 60°C e 80°C. A otimização foi realizada analisando-se o efeito da concentração de albumina expressa em % e tempo de bateção expresso em minutos em relação às variáveis respostas densidade da espuma e estabilidade térmica da espuma, baseado no volume de espuma remanescente. Obteve-se a curva de secagem (razão de umidade versus tempo de secagem) para o tratamento controle (TC), sem adição de albumina, e o tratamento otimizado (TO). Os resultados mostraram que somente a variável tempo de bateção (efeito linear e quadrático) teve influência significativa (p < 0,05) nos valores de densidade de espuma. A estabilidade da espuma foi influenciada significativamente pelo tempo de bateção (p < 0,10) e concentração de albumina (p < 0,10). As condições ótimas de formação de espuma encontradas foram concentração de albumina de 4,5% e tempo de bateção de 4,5 minutos, considerando maior estabilidade de espuma e menor densidade. Os resultados das curvas de secagem mostraram que a formação de espuma com o uso de albumina reduziu significativamente (p < 0,05) o tempo para que se atingisse a umidade de equilíbrio durante a secagem. Os valores de umidade de equilíbrio não apresentaram diferença significativa (p > 0,05) entre os tratamentos com aplicação de espuma nas temperaturas estudadas, porém foram menores que os tratamentos sem aplicação de espuma.

Otimização da produção de nanopartículas de prata utilizando nova síntese e avaliação da sua ação sanitizante / Optimization of production of silver nanoparticles produced by new synthesis and evaluation of its sanitizing action

Sanitizantes químicos são utilizados na higienização de superfícies que entram em contato com os alimentos, de forma a eliminar patógenos e reduzir deterioradores assegurando a inocuidade dos alimentos para os consumidores. Atualmente, tem-se o interesse no desenvolvimento de novos antimicrobianos, em razão do aumento no número de bactérias resistentes. Neste contexto, o objetivo deste trabalho foi otimizar a produção de nanopartículas de prata a partir de uma nova síntese, bem como avaliar sua capacidade antimicrobiana por diferentes metodologias. Observou-se que o rendimento na produção das nanopartículas de prata aumentou à medida que a concentração do surfactante usado na dispersão foi também aumentada, isto pode ser explicado pelo fato da reação de formação das nanopartículas se caracterizar como uma catálise micelar. Pelos resultados obtidos no teste de adesão bacteriana, observouse que a adesão de Staphylococcus aureus e Listeria innocua foi menor nas superfícies condicionadas com as nanopartículas de prata. As nanopartículas de prata também foram capazes de reduzir o número de bactérias aderidas em diferentes superfícies de aço inoxidável, superfícies estas, comumente utilizadas nas indústrias de alimentos. Portanto, as nanopartículas de prata obtidas por uma nova síntese apresentam-se eficientes como agentes antimicrobianos, com potencial uso como sanitizantes, na indústria de alimentos.

Sanitizers are used to clean surfaces that come in contact with food in order to eliminate pathogens and reduce spoilage ensuring food safety for consumers. Actually, there is interest in developing new antimicrobial agents, due to the increase in the number of resistant bacteria. In this context, the work aimed to optimize the production of silver nanoparticles obtained by a new synthesis, and assess their antimicrobial ability. We observed that the yield in production of the silver nanoparticles increases as is also increased the concentration of surfactant used in the dispersion, since the reaction produced is characterized in a micellar catalyst. Results obtained during testing of bacterial adhesion showed us that the adherence of S. aureus and L. innocua was lower when the surfaces were covered with the silver nanoparticles. The nanoparticles were also able to reduce the number of attached bacteria on surfaces of stainless steel. Therefore, the silver nanoparticles obtained by a new synthesis have to be effective antimicrobial agents with the potential use as sanitizing in the food industry.

Revestimento ativo de amido na conservação pós-colheita de pera Williams minimamente processada / Starch-based edible coating on extending shelf life of fresh-cut pear

A pera é uma das frutas de clima temperado mais consumidas no Brasil, no entanto sua conservação é limitada devido ao seu escurecimento quando sofre danos ou tratamentos físicos. Os revestimentos comestíveis interagem favoravelmente com o alimento, aumentando sua vida de prateleira. Este trabalho objetivou avaliar a ação de revestimento de amido adicionado de lactato de cálcio e L-cisteína na inibição do escurecimento enzimático, na redução do crescimento de psicrotrófilos e enterobactérias e na manutenção da textura. As peras fatiadas foram cobertas com revestimentos comestíveis à base de amido incorporados com cisteína e lactato de cálcio, exceto o controle - sem revestimento (C). Os tratamentos foram: apenas revestimento (T1); 2,0 por cento lactato de cálcio e 1,0 por cento L-cisteína (T2) e 2,0 por cento lactato de cálcio e 1,5 por cento L-cisteína (T3). As amostragens foram feitas nos tempos zero, dois, quatro e seis dias. As amostras foram mantidas sob refrigeração (7°C±2°C). As peras submetidas aos tratamentos T2 e T3 apresentaram-se significativamente mais firmes (P<0,05) que as dos tratamentos C e T1. A ação da cisteína sobre a inibição do escurecimento enzimático foi observada nos tratamentos T2 e T3, que não apresentaram diferença significativa (P≥0,05) entre si para os valores de ∆E, no entanto esses valores foram significativamente menores em relação ao controle. No tempo 6, a redução decimal na contagem de psicrotrófilos chegou a 3,03 e 2,43 para T3 e T2, em comparação com o controle. A contagem de enterobactérias apresentou comportamento semelhante, sendo o valor da redução de 3,16 e 3,05 para T2 e T3 em relação ao controle. Verificou-se que a vida de prateleira de pera minimamente processada pode ser mantida por mais tempo com o uso desse revestimento.

Pear is one of the most consumed temperate fruits in Brazil; however their conservation is limited due to browning when it suffers injuries or physical treatments. The edibles coating interact with the food positively extending its shelf life. This research aimed to evaluate the action of starch edible coating incorporated with calcium lactate and L-cysteine on enzymatic browning inhibition, on psychrotrophs and enterobacteriaceae growing reduction and on firmness maintenance. The sliced pears were coated with starch edible coating incorporated with L-cysteine and calcium lactate, except control, without coating (C). The treatment were: only coating (T1); 2,0 percent calcium lactate and 1,0 percent L-cysteine (T2); 2,0 percent calcium lactate and 1,5 percent L-cysteine (T3). The samples were taken at 0, 2, 4 and 6 days. Pears were keeped under refrigeration (7°C±2°C). Pears submitted to treatments T2 and T3 show significantly more firms (P<0,05) compared to treatments C and T1. Cysteine action over enzymatic browning inhibition was observed in treatments T2 and T3 which do not differed significantly each other (P≥0,05) to ∆E values however these were significantly lower than control (C). At time 6, decimal reduction on psychrotrophs counting reached 3,03 and 2,43 to T3 e T2 compared to control. Enterobacteriaceae counting showed similar behavior where the reduction values were 3,16 and 3,05 to T2 e T3 compared to control. It was verified that using the studied edible coating on fresh cut pear can extend its shelf life.