Effect of Divalent Cations on the Interaction of Carboxylate Self-Assembled Monolayers.

Interactions between organic molecules in aqueous environments, whether in the fluid phase or adsorbed on solids, are often affected by the cations present in the solution. We investigated, at nanometer scale, how surface carboxylate interactions are influenced by dissolved divalent cations: Mg2+, Ca2+, Sr2+, and Ba2+. Self-assembled monolayer (SAM) surfaces with exposed terminations of alkyl, -CH3, carboxylate, -COO- , or dicarboxylate, -DiCOO-, were deposited on gold-coated tips and substrates. We used atomic force microscopy (AFM), in chemical force mapping (CFM) mode, to measure adhesion forces between various combinations of SAMs on the tip and substrate, in solutions of 0.5 M NaCl, that contained 0.012 M of one of the divalent cations. The type of cation, the number of carboxyl groups that interact, and their structure on the SAM influenced adhesion between the surfaces. The effect of the reference solution, which only contains Na+ cations, on adhesion force was mainly attributed to van der Waals and hydrophobic forces, explaining the lower force in systems that are more hydrophilic, i.e., -COO--COO-, and higher force for more hydrophobic systems. For charged surfaces, i.e., -COO- and -DiCOO-, in divalent cation solutions results were consistent with ion bridging. The inclusion of a hydrophobic surface, i.e., the -CH3-COO- or -CH3-DiCOO- system, decreased the possibility for strong cation bridging with the charged surface, resulting in lower adhesion. For systems including -COO-, the adhesion force series followed the inverse cation hydrated radius trend (Na+ ≈ Mg2+ < Sr2+ < Ca2+ < Ba2+) whereas -DiCOO- was responsible for lower adhesion force and modified trends, depending on the corresponding surface in the system. Differences in force magnitude between the monolayers were correlated with lower charge availability on the -DiCOO- surface as a result of fewer active sites, probably because of the tendency of exposed malonate surface groups to interact between them, as well as high rigidity, resulting from the molecule structure. The characteristic response of the -DiCOO- surface in solutions of Sr2+ and Ca2+ was correlated with possible malonate complexation modes. Comparison with previous studies suggested that the strong response of a -DiCOO- surface to Sr2+ resulted from bidentate chelation, whereas Ca2+ response was attributed to alpha-mode association to malonate.

Specific Ion Effects on the Interaction of Hydrophobic and Hydrophilic Self-Assembled Monolayers.

Interactions between mineral surfaces and organic molecules are fundamental to life processes. The presence of cations in natural environments can change the behavior of organic compounds and thus alter the mineral-organic interfaces. We investigated the influence of Na+, Mg2+, Ca2+, Sr2+, and Ba2+ on the interaction between two models, self-assembled monolayers, that were tailored to have hydrophobic -CH3 or hydrophilic -COO(H) terminations. Atomic force microscopy in chemical force mapping mode, where the tips were functionalized with the same terminations, was used to measure adhesion forces between the tip and substrate surfaces, to gather fundamental information about the role of these cations in the behavior of organic compounds and the surfaces where they adsorb. Adhesion force between hydrophobic surfaces in 0.5 M NaCl solutions that contained 0.012 M divalent cations did not change, regardless of the ionic potential, that is, the charge per unit radius, of the cation. For systems where one or the other surface was functionalized with carboxylate, -COO(H), mostly in its deprotonated form, -COO-, a reproducible change in the adhesion force was observed for each of the ions. The trend of increasing adhesion force followed the pattern: Na+ ≈ Mg2+ < Sr2+ < Ca2+ < Ba2+, suggesting that ionic potential, thus hydrated radius, controls the interaction. The presence of a -CH3 surface in the asymmetric system leads to lower adhesion forces than in the hydrophilic system, whereas the ionic trend remains the same. Although specific ion effects are felt in both systems, the lower adhesion force in the asymmetric system, compared with the hydrophilic system, implies that the -CH3 surface plays an important role.

Publisher Correction: Interactions of the Calcite {10.4} Surface with Organic Compounds: Structure and Behaviour at Mineral - Organic Interfaces.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.

Adsorption of organic ligands on low surface charge clay minerals: the composition in the aqueous interface region.

An understanding of the mechanisms that control the adsorption of organic molecules on clay minerals is of interest in several branches of science and industry. Oil production using low salinity injection fluids can increase yields by as much as 40% over standard injection with seawater or formation water. The mechanism responsible for the low salinity response is still debated, but one hypothesis is a change in pore surface wettability. Organic contamination in soil and drinking water aquifers is a challenge for municipal water suppliers and for agriculture. A better understanding is needed for how mineral species, solution composition and pH affect the desorption of low molecular weight organic ligands from clay minerals and consequently their wettability. We used X-ray photoelectron spectroscopy under cryogenic conditions to investigate the in situ composition in the mineral-solution interface region in a series of experiments with a range of pH and ion concentrations. We demonstrate that both chlorite and kaolinite release organic molecules under conditions relevant for low salinity water flooding. This release increases with a higher solution pH but is only slightly affected by the character of the organic ligand. This is consistent with the observation that low salinity enhanced oil recovery correlates with the presence of chlorite and kaolinite. Our results indicate that the pore surface charge and salinity of formation water and injection fluids are key parameters in determining the low salinity response. In general, our results imply that clay mineral surface charge influences the composition in the interface through an affinity for organic molecules.

Composition in the Interface between Clay Mineral Surfaces and Divalent Cation Electrolytes.

The interfacial free energy of a solid, which determines its adsorption properties, depends on interactions between the surface and the fluid. A change in surface composition can completely change the behavior of the solid. Decades of work have explored adsorption and its effects at solid-fluid interfaces from the macroscopic perspective and using molecular modeling, so the concept of the electric double layer (EDL) is well established in the community. However, direct, molecular level, experimental observations of the composition within the interface region, and its change with time and conditions, are not abundant. We used cryogenic X-ray photoelectron spectroscopy (cryoXPS) to observe the composition in the clay mineral-solution interface region as a function of bulk solution composition, on illite and chlorite in MgCl2 and CaCl2 electrolytes, over a range of concentrations (1-125 mM), in situ, on vitrified samples. These samples were prepared from very thin smears of centrifuged wet paste that were instantaneously chilled to liquid N2 temperature. They preserved the adsorbed solution in its amorphous state, maintaining the location of the ions and water with respect to the solid, without the disruption that occurs during drying or the rearrangement that results as water crystallizes during freezing. With decreasing ionic strength, we could directly monitor the loss of negative charge in the interface region, producing an anion deficiency, as predicted by theory. The Cl-/Me2+ ratio dropped below 1 for chlorite at 12-25 mM MeCl2 and for illite at 75-100 mM. In addition to better understanding of clay mineral behavior in solution, this work demonstrates that only those clay minerals where surface charge density is the same or lower than that for chlorite contribute to a low salinity enhanced oil recovery response (LS EOR). This explains many of the contradictory results from studies about the role of clay minerals in LS EOR.

The mechanisms of crystal growth inhibition by organic and inorganic inhibitors.

Understanding mineral growth mechanism is a key to understanding biomineralisation, fossilisation and diagenesis. The presence of trace compounds affect the growth and dissolution rates and the form of the crystals produced. Organisms use ions and organic molecules to control the growth of hard parts by inhibition and enhancement. Calcite growth in the presence of Mg2+ is a good example. Its inhibiting role in biomineralisation is well known, but the controlling mechanisms are still debated. Here, we use a microkinetic model for a series of inorganic and organic inhibitors of calcite growth. With one, single, nonempirical parameter per inhibitor, i.e. its adsorption energy, we can quantitatively reproduce the experimental data and unambiguously establish the inhibition mechanism(s) for each inhibitor. Our results provide molecular scale insight into the processes of crystal growth and biomineralisation, and open the door for logical design of mineral growth inhibitors through computational methods.

Interactions of the Calcite {10.4} Surface with Organic Compounds: Structure and Behaviour at Mineral - Organic Interfaces.

The structure and the strength of organic compound adsorption on mineral surfaces are of interest for a number of industrial and environmental applications, oil recovery, CO2 storage and contamination remediation. Biomineralised calcite plays an essential role in the function of many organisms that control crystal growth with organic macromolecules. Carbonate rocks, composed almost exclusively of calcite, host drinking water aquifers and oil reservoirs. In this study, we examined the ordering behaviour of several organic compounds and the thickness of the adsorbed layers formed on calcite {10.4} surfaces. We used X-ray reflectivity (XRR) to study calcite {10.4} surfaces that were prepared in three alcohols: methanol, isopropanol and pentanol and one carboxylic acid: octanoic acid. All molecules adsorbed in self-assembled layers, where thickness depended on the density and the length of the molecule. For methanol and isopropanol, molecular dynamic simulations (MD) provided complementary information, which allowed us to develop a surface model. Branching in isopropanol induced slightly less ordering because of the additional degree of freedom. Pentanol and octanoic acid adsorbed as single monolayers. The results of this work indicate that adhered organic compounds from the surrounding environment can affect the surface behaviour, depending on properties of the organic compound.

Silicon alleviates Cd stress of wheat seedlings (Triticum turgidum L. cv. Claudio) grown in hydroponics.

We investigated the potential role of silicon in improving tolerance and decreasing cadmium (Cd) toxicity in durum wheat (Triticum turgidum L. durum) either through a reduced Cd uptake or exclusion/sequestration in non-metabolic tissues. For this, plants were grown in hydroponic conditions for 10 days either in presence or absence of 1 mM Si and for 11 additional days in various Cd concentrations (0, 0.5, 5.0 and 50 µM). After harvesting, morphological and physiological parameters as well as elemental concentrations were recorded. Cadmium caused reduction in growth parameters, photosynthetic pigments and mineral nutrient concentrations both in shoots and roots. Shoot and root contents of malate, citrate and aconitate increased, while contents of phosphate, nitrate and sulphate decreased with increasing Cd concentrations in plants. Addition of Si to the nutrient solution mitigated these adverse effects: Cd concentration in shoots decreased while concentration of Cd adsorbed at the root cell apoplasmic level increased together with Zn uptake by roots. Overall, total Cd uptake decreased in presence of Si. There was no co-localisation of Cd and Si either at the shoot or at the root levels. No Cd was detected in leaf phytoliths. In roots, Cd was mainly detected in the cortical parenchyma and Si at the endodermis level, while analysis of the outer thin root surface of the plants grown in the 50 µM Cd + 1 mM Si treatment highlighted non-homogeneous Cd and Si enrichments. These data strongly suggest the existence of a root localised protection mechanism consisting in armoring the root surface by Si- and Cd-bearing compounds and in limiting root-shoot translocation.

Extreme mobility enhancement of two-dimensional electron gases at oxide interfaces by charge-transfer-induced modulation doping.

Two-dimensional electron gases (2DEGs) formed at the interface of insulating complex oxides promise the development of all-oxide electronic devices. These 2DEGs involve many-body interactions that give rise to a variety of physical phenomena such as superconductivity, magnetism, tunable metal-insulator transitions and phase separation. Increasing the mobility of the 2DEG, however, remains a major challenge. Here, we show that the electron mobility is enhanced by more than two orders of magnitude by inserting a single-unit-cell insulating layer of polar La(1-x)Sr(x)MnO3 (x = 0, 1/8, and 1/3) at the interface between disordered LaAlO3 and crystalline SrTiO3 produced at room temperature. Resonant X-ray spectroscopy and transmission electron microscopy show that the manganite layer undergoes unambiguous electronic reconstruction, leading to modulation doping of such atomically engineered complex oxide heterointerfaces. At low temperatures, the modulation-doped 2DEG exhibits Shubnikov-de Haas oscillations and fingerprints of the quantum Hall effect, demonstrating unprecedented high mobility and low electron density.

Effect of silicon on wheat seedlings (Triticum turgidum L.) grown in hydroponics and exposed to 0 to 30 µM Cu.

MAIN CONCLUSION: Aqueous Si limits Cu uptake by a Si-accumulating plant via physicochemical mechanisms occurring at the root level. Sufficient Si supply may alleviate Cu toxicity in Cu-contaminated soils. Little information is available on the role of silicon (Si) in copper (Cu) tolerance while Cu toxicity is widespread in crops grown on Cu-contaminated soils. A hydroponic study was set up to investigate the influence of Si on Cu tolerance in durum wheat (Triticum turgidum L.) grown in 0, 0.7, 7.0 and 30 µM Cu without and with 1.0 mM Si, and to identify the mechanisms involved in mitigation of Cu toxicity. Si supply alleviated Cu toxicity in durum wheat at 30 µM Cu, while Cu significantly increased Si concentration in roots. Root length, photosynthetic pigments concentrations, macroelements, and organic anions (malate, acetate and aconitate) in roots, were also increased. Desorption experiments, XPS analysis of the outer thin root surface (≤100 Å) and µXRF analyses showed that Si increased adsorption of Cu at the root surface as well as Cu accumulation in the epidermis while Cu was localised in the central cylinder when Si was not applied. Copper was not detected in phytoliths. This study provides evidences for Si-mediated alleviation of Cu toxicity in durum wheat. It also shows that Si supplementation to plants exposed to increasing levels of Cu in solution induces non-simultaneous changes in physiological parameters. We propose a three-step mechanism occurring mainly at the root level and limiting Cu uptake and translocation to shoots: (i) increased Cu adsorption onto the outer thin layer root surface and immobilisation in the vicinity of root epidermis, (ii) increased Cu complexation by both inorganic and organic anions such as aconitate and, (iii) limitation of translocation through an enhanced thickening of a Si-loaded endodermis.

Interaction of alcohols with the calcite surface.

A clearer understanding of calcite interactions with organic molecules would contribute to a range of fields including harnessing the secrets of biomineralisation where organisms produce hard parts, increasing oil production from spent reservoirs, remediating contaminated soils and drinking water aquifers and improving manufacturing methods for industrial products such as pigments, soft abrasives, building materials and optical devices. Biomineralisation by some species of blue green algae produces beautifully elaborate platelets of calcite where the individual crystals are of nanometer scale. Controlling their growth requires complex polysaccharides. Polysaccharide activity depends on the functionality of OH groups, so to simplify the system in order to get closer to a molecular level understanding, we investigated the interaction of OH from a suite of alcohols with clean, freshly cleaved calcite surfaces. X-ray photoelectron spectroscopy (XPS) provided binding energies and revealed the extent of surface coverage. Molecular dynamics (MD) simulations supplemented with information about molecule ordering, orientation and packing density. The results show that all alcohols studied bond with the calcite surface through the OH group, with their carbon chains sticking away in a standing-up orientation. Alcohol molecules are closely packed and form a well-ordered monolayer on the surface.

Adhesion of alkane as a functional group on muscovite and quartz: dependence on pH and contact time.

The interactions between mineral surfaces and organic molecules in water control many processes in nature and in the production of modern materials. To improve the understanding of fluid-surface interactions, we investigated the interface behavior of quartz and muscovite, a model for clay minerals, in aqueous solutions where the pH and composition were controlled. We used atomic force microscopy (AFM) in chemical force mapping (CFM) mode to measure adhesion using tips functionalized with alkyl, -CH3. By combining adhesion forces measured as a function of pH, with data from streaming potential experiments and DLVO calculations, we were able to determine the surface charge density. We observed increased adhesion between the mineral surface and the hydrophobic tips as the contact time increased from 7 ms to ∼2 s. The diffusion of dissolved ions takes time, and density functional theory (DFT) calculations did not indicate a strong hydration of the mineral surfaces. Therefore, we interpret that the loss of ions from the confined space between the tip and sample is a likely explanation of the correlation between the dwell time and adhesion. The maximum adhesion increase with dwell time for muscovite, i.e., 400 ± 77 pN, was considerably larger than for quartz, 84 ± 15 pN, which fits with the different surface structure and composition of the two minerals. We propose two mechanisms to explain these results: (1) cations that are structured in the solution and on the surface remain associated at the tip-sample interface initially but diffuse away during extended contact time and (2) adventitious carbon, the organic material that comes spontaneously from air and solution, can diffuse to the tip-sample interface during contact. This material decreases the surface energy by aggregating near the alkyl tip and increases adhesion between the tip and sample.

Incorporation of monovalent cations in sulfate green rust.

Green rust is a naturally occurring layered mixed-valent ferrous-ferric hydroxide, which can react with a range of redox-active compounds. Sulfate-bearing green rust is generally thought to have interlayers composed of sulfate and water. Here, we provide evidence that the interlayers also contain monovalent cations, using X-ray photoelectron spectroscopy and synchrotron X-ray scattering. For material synthesized with Na(+), K(+), Rb(+), or Cs(+), interlayer thickness derived from basal plane spacings correlates with the radius of the monovalent cation. In addition, sequential washing of the materials with water showed that Na(+) and K(+) were structurally fixed in the interlayer, whereas Rb(+) and Cs(+) could be removed, resulting in a decrease in the basal layer spacing. The incorporation of cations in the interlayer opens up new possibilities for the use of sulfate green rust for exchange reactions with both anions and cations: e.g., radioactive Cs.

Change in organic molecule adhesion on α-alumina (sapphire) with change in NaCl and CaCl2 solution salinity.

We investigated the adhesion of two functional groups to α-alumina as a model for the adsorption of organic molecules on clay minerals. Interactions between organic compounds and clay minerals play an important role in processes such as drinking water treatment, remediation of contaminated soil, oil recovery, and fabricating complicated nanomaterials, and there have been claims that organic compound-clay mineral interaction created the ordering that is necessary for the genesis of life. In many organisms, interaction between organic molecules and biominerals makes it possible to control the growth of bones, teeth, and shells. Adhesion of carboxylic acid, -COO(H), and pyridine, -C5H5N(H(+)), on the {0001} plane of α-alumina wafers has been investigated with atomic force microscopy (AFM) in chemical force mapping (CFM) mode. Both functional groups adhered to α-alumina in deionized water at pH < 5, and adhesion decreased as NaCl or CaCl2 concentration increased. X-ray photoelectron spectroscopy (XPS) showed that Na(+) and Ca(2+) adsorbed to the α-alumina surface at pH < 5, decreasing surface interaction with the carboxylic acid and pyridine groups. We interpret the results as evidence that the tips adhere to alumina through hydrogen bonding when only water is present. In solutions containing NaCl and CaCl2, cations are adsorbed but Cl(-) is not. When NaCl solutions are replaced by CaCl2, Ca(2+) replaces Na(+), but rinsing with ultrapure deionized water (pH 5.6) could not restore the original protonated surface. The results demonstrate that the alumina surface at pH 3 has a higher affinity for inorganic cations than for -COO(H) or -C5H5N(H(+)), in spite of the known positive surface charge of α-alumina {0001} wafers. These results demonstrate that solution salinity plays an important role in surface properties, controlling surface tension (i.e., contact angle) and adsorption affinity on α-alumina and, by analogy, on clay minerals.

Interactions of Na+, K+, Mg2+, and Ca2+ with benzene self-assembled monolayers.

Interactions between cations and organic molecules are found throughout nature, from the functionality and structure of proteins in humans and animals to the exchange of ions in minerals in soil and oil reservoirs with the fluid phases. We have explored the behavior of the s-block elements that are most common in the natural world, namely, Na(+), K(+), Mg(2+), and Ca(2+). Specifically, we investigated how these ions affect the interactions between surfaces covered by self-assembled monolayers (SAMs) terminated with benzene molecules. We used a flat oxidized silicon substrate and an atomic force microscopy (AFM) tip that were both functionalized with 11-phenoxyundecane-1-thiol and measured the adhesion force between them in solutions of each of the four chloride salts. We observed that the adhesion increased in the order of the Hofmeister series: K(+) < Na(+) ≈ Mg(2+) < Ca(2+). Supplementary evidence from X-ray photoelectron spectroscopy (XPS) allowed us to conclude that K(+) binds in the benzene layers, creating a positive surface charge on the benzene-covered surfaces, thus leading to lower adhesion in KCl solutions than in pure water. Evidence suggested that Ca(2+) does not bind to the surfaces but forms bridges between the layers, leading to higher adhesion than in pure water. In Na(+) and Mg(2+) solutions, adhesion is quite similar to that in pure water, indicating a lack of interaction between these two ions and the surfaces, or at least that the interaction is too weak to be detected by our measurements. The results of our studies clearly show that even a nonpolar, hydrophobic molecule, such as benzene, has a role to play in the behavior of aqueous solutions and that it interacts differently depending on which ions are present. Even ions from the same column in the periodic table behave differently.

Room temperature formation of high-mobility two-dimensional electron gases at crystalline complex oxide interfaces.

Well-controlled sub-unit-cell layer-bylayer epitaxial growth of spinel alumina is achieved at room temperature on a TiO2 -terminated SrTiO3 single-crystalline substrate. By tailoring the interface redox reaction, 2D electron gases with mobilities exceeding 3000 cm 2 V(-1) s(-1) are achieved at this novel oxide interface.

A high-mobility two-dimensional electron gas at the spinel/perovskite interface of γ-Al2O3/SrTiO3.

The discovery of two-dimensional electron gases at the heterointerface between two insulating perovskite-type oxides, such as LaAlO(3) and SrTiO(3), provides opportunities for a new generation of all-oxide electronic devices. Key challenges remain for achieving interfacial electron mobilities much beyond the current value of approximately 1,000 cm(2) V(-1) s(-1) (at low temperatures). Here we create a new type of two-dimensional electron gas at the heterointerface between SrTiO(3) and a spinel γ-Al(2)O(3) epitaxial film with compatible oxygen ions sublattices. Electron mobilities more than one order of magnitude higher than those of hitherto-investigated perovskite-type interfaces are obtained. The spinel/perovskite two-dimensional electron gas, where the two-dimensional conduction character is revealed by quantum magnetoresistance oscillations, is found to result from interface-stabilized oxygen vacancies confined within a layer of 0.9 nm in proximity to the interface. Our findings pave the way for studies of mesoscopic physics with complex oxides and design of high-mobility all-oxide electronic devices.

Atomic modifications by synchrotron radiation at the calcite-ethanol interface.

This article reports on studies of the chemical alterations induced by synchrotron radiation at the calcite-ethanol interface, a simple model system for interfaces between minerals and more complex organic molecules containing OH groups. A combination of X-ray reflectivity and X-ray photoelectron spectroscopy of natural calcite, cleaved in distilled ethanol to obtain new clean interfaces, indicated that, during a 5 h period, the two top atomic layers of calcite, CaCO(3), transform into calcium oxide, CaO, by releasing CO(2). Also, the occupation of the first ordered layer of ethanol attached to calcite by hydrogen bonds almost doubles. Comparison between radiated and non-radiated areas of the same samples demonstrate that these effects are induced only by radiation and not caused by aging. These observations contribute to establishing a time limit for synchrotron experiments involving fluid-mineral interfaces where the polar OH group, as present in ethanol, plays a key role in their molecular structure and bonding. Also, the chemical evolution observed in the interface provides new insight into the behavior of some complex organic molecules involved in biomineralization processes.

Molecular ordering of ethanol at the calcite surface.

To produce biominerals, such as shells, bones, and teeth, living beings create organic compounds that control the growth of the solid phase. Investigating the atomic scale behavior of individual functional groups at the mineral-fluid interface provides fundamental information that is useful for constructing accurate predictive models for natural systems. Previous investigations of the activity of coccolith-associated polysaccharides (CAP) on calcite, using atomic force microscopy (AFM) [Henriksen, K., Young, J. R., Bown, P. R., and Stipp, S. L. S. Palentology 2004, 43 (Part 3), 725-743] and molecular dynamics (MD) modeling [Yang, M., Stipp, S. L. S., and Harding, J. H. Cryst. Growth Des. 2008, 8 (11), 4066-4074], have suggested that OH functional groups control polysaccharide attachment. The purpose of this work was to characterize, using X-ray reflectivity (XR) combined with molecular dynamics (MD) simulations, the structuring on calcite of a layer of the simplest carbon chain molecule that contains an OH group, ethanol (CH(3)-CH(2)-OH). We found evidence that EtOH forms a highly ordered structure at the calcite surface, where the first layer molecules bond with calcite. The ethanol molecules stand up perpendicularly at the interface or nearly so. As a consequence, the fatty, CH(3) ends form a new surface, about 6 Å from the termination of the bulk calcite, and beyond that, there is a thin gap where ethanol density is low. Following is a more disordered layer that is two to three ethanol molecules thick, about 14 Å, where density more resembles that of bulk liquid ethanol. The good agreement between theory and experiment gives confidence that a theoretical approach can offer information about behavior in more complex systems.

Characterization of Eyjafjallajokull volcanic ash particles and a protocol for rapid risk assessment.

On April 14, 2010, when meltwaters from the Eyjafjallajökull glacier mixed with hot magma, an explosive eruption sent unusually fine-grained ash into the jet stream. It quickly dispersed over Europe. Previous airplane encounters with ash resulted in sandblasted windows and particles melted inside jet engines, causing them to fail. Therefore, air traffic was grounded for several days. Concerns also arose about health risks from fallout, because ash can transport acids as well as toxic compounds, such as fluoride, aluminum, and arsenic. Studies on ash are usually made on material collected far from the source, where it could have mixed with other atmospheric particles, or after exposure to water as rain or fog, which would alter surface composition. For this study, a unique set of dry ash samples was collected immediately after the explosive event and compared with fresh ash from a later, more typical eruption. Using nanotechniques, custom-designed for studying natural materials, we explored the physical and chemical nature of the ash to determine if fears about health and safety were justified and we developed a protocol that will serve for assessing risks during a future event. On single particles, we identified the composition of nanometer scale salt coatings and measured the mass of adsorbed salts with picogram resolution. The particles of explosive ash that reached Europe in the jet stream were especially sharp and abrasive over their entire size range, from submillimeter to tens of nanometers. Edges remained sharp even after a couple of weeks of abrasion in stirred water suspensions.