Low-energy quasi-circular electron correlations with charge order wavelength in Bi2Sr2CaCu2O8+δ.

Most resonant inelastic x-ray scattering (RIXS) studies of dynamic charge order correlations in the cuprates have focused on the high-symmetry directions of the copper oxide plane. However, scattering along other in-plane directions should not be ignored as it may help understand, for example, the origin of charge order correlations or the isotropic scattering resulting in strange metal behavior. Our RIXS experiments reveal dynamic charge correlations over the qx-qy scattering plane in underdoped Bi2Sr2CaCu2O8+δ. Tracking the softening of the RIXS-measured bond-stretching phonon, we show that these dynamic correlations exist at energies below approximately 70 meV and are centered around a quasi-circular manifold in the qx-qy scattering plane with radius equal to the magnitude of the charge order wave vector, qCO. This phonon-tracking procedure also allows us to rule out fluctuations of short-range directional charge order (i.e., centered around [qx = ±qCO, qy = 0] and [qx = 0, qy = ±qCO]) as the origin of the observed correlations.

Direct Tissue PCR and Genotyping for Species Identification in a Case of Laryngeal Blastomycosis.

Otolaryngologic manifestations of infection with Blastomyces species are extremely rare and restricted geographically to recognized endemic regions. Here, we describe a case of laryngeal blastomycosis that presented as slowly progressive dysphonia. While a preliminary diagnosis was made using routine histopathology, a species identification of Blastomyces dermatitidis was made using polymerase chain reaction amplification and rapid genotyping without the need for fungal culture. All symptoms resolved following 1 month of antifungal therapy. Rapid molecular differentiation of B dermatitidis from Blastomyces gilchristii provides important insights into pathogenesis given recent recognition of differences in clinical spectra.

Stabilization of three-dimensional charge order through interplanar orbital hybridization in PrxY1-xBa2Cu3O6+δ.

The shape of 3d-orbitals often governs the electronic and magnetic properties of correlated transition metal oxides. In the superconducting cuprates, the planar confinement of the [Formula: see text] orbital dictates the two-dimensional nature of the unconventional superconductivity and a competing charge order. Achieving orbital-specific control of the electronic structure to allow coupling pathways across adjacent planes would enable direct assessment of the role of dimensionality in the intertwined orders. Using Cu L3 and Pr M5 resonant x-ray scattering and first-principles calculations, we report a highly correlated three-dimensional charge order in Pr-substituted YBa2Cu3O7, where the Pr f-electrons create a direct orbital bridge between CuO2 planes. With this we demonstrate that interplanar orbital engineering can be used to surgically control electronic phases in correlated oxides and other layered materials.

Titanium hydride nanoparticles and nanoinks for aerosol jet printed electronics.

Conductive inks commonly rely on oxidation-resistant metallic nanoparticles such as gold, silver, copper, and nickel. The criterion of air stability limits the scope of material properties attainable in printed electronic devices. Here we present an alternative approach based on air-stable nanoscale metal hydrides. Conductive patterns based on titanium hydride (TiH2) nanoinks were successfully printed on polyimide under ambient atmosphere and cured using intense pulsed light processing. Nanoparticles of TiH2 were generated by heating TiH2 powder in octylamine followed by wet ball milling, yielding <100 nm platelets. The addition of a suitable polymer dispersant during ball milling yielded stable colloidal dispersions suitable for liquid-phase processing. Aerosol jet printing of the resultant TiH2 nanoinks was demonstrated on glass and polyimide substrates, with a resolution as fine as 20 µm. Following intense pulsed light curing, samples on polyimide were found to exhibit a sintered, porous morphology with an electrical sheet resistance of ∼150 Ω â–¡-1.

The Lanthanide Contraction Is a Variable.

Upon examination of the bond distances of the recently reported series of [Ln(SST)3(THF)2] [Ln = lanthanides, SST = tris(trimethylsilyl)siloxide (OSi(SiMe3)3), and THF = tetrahydrofuran] compounds, it was found that over the Ln-series (La through Lu), the Ln-O(THF) bond changed by 0.257 Å, whereas the Ln-O(SST) bond varied by 0.164 Å. Examination of all similarly ligated Ln-O(THF) (Ln = La vs Lu) structures available in the Cambridge Structural Database (CSD) revealed that this previously unreported, increased Ln-contraction is pervasive. Further evaluations showed that this enhanced Ln-contraction also occurs for pyridine (py) in the [Ln(SST)3(py)2] family as well as the average Ln-N(py) (La vs Lu) structure distances recovered from the CSD. Additional ligands, such as halides (Cl and I) were found to display this enhanced Ln-contraction, while other species (i.e., cyclopentadienide, alkoxide, SST, and dimethyl sulfoxide) yielded a "normal" Ln-contraction (La-L vs Lu-L). Gas-phase electronic structure density functional theory calculations were carried out to evaluate the molecular orbital influence on the Ln-contraction between Ln-O(SST) and Ln-O(THF). The calculated [Ln(SST)3(THF)2] structures were found to demonstrate the same capricious Ln-contraction. Based on these studies, one can say that the variability of the Ln-contraction noted in the [Ln(SST)3(THF)2] experimental data is due to the different bonding types, ion-ion for the Ln-SST bond versus ion-dipole for the Ln-THF bond.

Synthesis and Characterization of Solvated Lanthanide Tris(trimethylsilyl)siloxides.

In an effort to develop precursors for the production of lanthanide silicate (LnSiOx) materials, the reactions of [Ln(NR2)3] (R = SiMe3) with three equivalents of tris(trimethylsilyl)silanol (H-OSi(SiMe3)3) or H-SST) in tetrahydrofuran (THF) were undertaken. The products were crystallographically characterized as [Ln(SST)3(THF)2] (where Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, and Lu). In general, these compounds are similar to the previously reported [Gd(SST)3(THF)2] complex, where each metal center of the monomeric species is found to adopt a trigonal bipyramidal (TBP; τ = av 0.95) geometry; however, the crystallographic structure solutions for these crystals invoke a much larger unit cell that reveals the complex disorder of the axial THF ligands. Using incompletely washed H-SST, the tetrahedrally (T-4) bound [Ln(SST)3(NEt3)] (Ln-NEt3 = Pr-NEt3, Ho-NEt3; NEt3 = triethylamine) compounds were isolated from the same reaction run in toluene. Rational syntheses of amine derivatives were realized by performing the same reaction with pure H-SST in toluene containing the appropriate amine and [Ln(NR2)3] with the final products identified as [Tm(SST)3(NEt3)] (Tm-NEt3) or [Tm(SST)3(NHPr2i)] (NHPr2i = di-iso-propylamine; Tm-NHPr2i). The products isolated from reactions undertaken in pyridine (py) were identified as [Ln(SST)3(py)2] (Ln-py = Ce-py, Eu-py, and Tm-py). The Ln-py structures exhibit the larger unit cell noted for the THF derivatives with each Ln adopting a TBP (τ = av 0.98) metal center possessing equatorial SST and axial py ligands. The same reaction run in toluene led to the isolation of [(η6-tol)Tm(SST)3] (Tm-tol). Multinuclear NMR (1H and 29Si) data support the retention of the solid-state structures of all of these compounds in solution. Photoluminescent measurements of Tb, Sm, Dy, and Eu were found to display emission and lifetime profiles in the visible range due to f-f transitions, consistent with trivalent lanthanide metal centers.

Demonstration of targeted crossovers in hybrid maize using CRISPR technology.

Naturally occurring chromosomal crossovers (CO) during meiosis are a key driver of genetic diversity. The ability to target CO at specific allelic loci in hybrid plants would provide an advantage to the plant breeding process by facilitating trait introgression, and potentially increasing the rate of genetic gain. We present the first demonstration of targeted CO in hybrid maize utilizing the CRISPR Cas12a system. Our experiments showed that stable and heritable targeted CO can be produced in F1 somatic cells using Cas12a at a significantly higher rate than the natural CO in the same interval. Molecular characterization of the recombinant plants demonstrated that the targeted CO were driven by the non-homologous end joining (NHEJ) or HDR repair pathways, presumably during the mitotic cell cycle. These results are a step towards the use of RNA-guided nuclease technology to simplify the creation of targeted genome combinations in progeny and accelerate breeding.

Pyridinium Salts of Dehydrated Lanthanide Polychlorides.

The reaction of lanthanide (Ln) chloride hydrates ([Ln(H2O)n(Cl)3]) with pyridine (py) yielded a set of dehydrated pyridinium (py-H) Ln-polychloride salts. These species were crystallographically characterized as [[py-H-py][py-H]2[LnCl6]] (Ln-6; Ln = La, Ce, Pr, Nd, Sm, Eu, Gd) or [[py-H]2[LnCl5(py)]] ((Ln-5; Ln = Tb, Dy, Ho, Er, Tm, Yb, Lu). The Ln-6 metal centers adopt an octahedral (OC-6) geometry, binding six Cl ligands. The -3 charge is off-set by two py-H moieties and a di-pyridinium (py-H-py) ion. For the Ln-5 species, an OC-6 anion is formed by the Ln cation binding a single py and five Cl ligands. The remaining -2 charge is offset by two py-H+ cations that H-bond to the anion. Significant H-bonding occurs between the various cation/anion moieties inducing the molecular stability. The change in structure from the Ln-6 to Ln-5 is believed to be due to the Ln-contraction producing a smaller unit cell, which prevents formation of the py-H-py+ cation, leading to the loss of the H-bonding-induced stability. Based on this, it was determined that the Ln-5 structures only exist when the lattice energy is small. While dehydrated polychloride salts can be produced by simply mixing in pyridine, the final structures adopted result from a delicate balance of cation size, Coulombic charge, and stabilizing H-bonding.

Beyond identity: Understanding the contribution of the 5' nucleotide of the antisense strand to RNAi activity.

In both the pharmaceutical and agricultural fields, RNA-based products have capitalized upon the mechanism of RNA interference for targeted reduction of gene expression to improve phenotypes and traits. Reduction in gene expression by RNAi is the result of a small interfering RNA (siRNA) molecule binding to an ARGONAUTE (AGO) protein and directing the effector complex to a homologous region of a target gene's mRNA. siRNAs properties that govern RNA-AGO association have been studied in detail. The siRNA 5' nucleotide (nt) identity has been demonstrated in plants to be an important property responsible for directing association of endogenous small RNAs with different AGO effector proteins. However, it has not been investigated whether the 5' nt identity is an efficacious determinant for topically-applied chemically synthesized siRNAs. In this study, we employed a sandpaper abrasion method to study the silencing efficacies of topically-applied 21 base-pair siRNA duplexes. The MAGNESIUM CHELATASE and GREEN FLUORESCENT PROTEIN genes were selected as endogenous and transgenic gene targets, respectively, to assess the molecular and phenotypic effects of gene silencing. Collections of siRNA variants with different 5' nt identities and different pairing states between the 5' antisense nt and its match in the sense strand of the siRNA duplex were tested for their silencing efficacy. Our results suggest a flexibility in the 5' nt requirement for topically applied siRNA duplexes in planta and highlight the similarity of 5' thermodynamic rules governing topical siRNA efficacy across plants and animals.

Stability Evaluation of Candidate Precursors for Chemical Vapor Deposition of Hafnium Diboride (HfB2).

Alternative candidate precursors to [Hf(BH4)4] for low-temperature chemical vapor deposition of hafnium diboride (HfB2) films were identified using density functional theory simulations of molecules with the composition [Hf(BH4)2L2], where L = -OH, -OMe, -O-t-Bu, -NH2, -N=C=O, -N(Me)2, and -N(CH2)5NH2 (1-piperidin-2-amine referred to as Pip2A). Disassociation energies (E D), potential energy surface (PES) scans, ionization potentials, and electron affinities were all calculated to identify the strength of the Hf-L bond and the potential reactivity of the candidate precursor. Ultimately, the low E D (2.07 eV) of the BH4 ligand removal from the Hf atom in [Hf(BH4)4] was partially attributed to an intermediate state where [Hf(BH4)3(H)] and BH3 is formed. Of the candidate precursors investigated, three exhibited a similar mechanism, but only -Pip2A had a PES scan that indicated binding competitive with [Hf(BH4)4], making it a viable candidate for further study.

Organophosphorus-Modified Lanthanide Nitrates as Potential Actinide Oxide Aerosol Surrogates.

In search of suitable simulants for aerosol uranium waste products from Plutonium Uranium Redox Extraction (PUREX) process burns, a series of lanthanide nitrate hydrates ([Ln(κ2-NO3)3·nH2O]) were dissolved in the presence of tributylphosphate (O═P(O(CH2)3CH3)3) referred to as TBP) in kerosene or triphenylphosphate (O═P(O(C6H5) referred to as TPhP) in acetone. The crystal structure of the TPhP derivatives of the lanthanide nitrate series and uranium nitrate were solved as [Ln(κ2-NO3)3(TPhP)3] (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) and [U(O)2(κ2-NO3)2(TPhP)2] (U), respectively. The lanthanide-TBP, Ln, and U were further characterized using FTIR spectroscopy, 31P NMR spectroscopy, thermogravimetric analysis, and X-ray fluorescence spectroscopy. Further, thermal treatment of the lanthanide-TBP, Ln, and U using a box furnace to mimic pyrolysis conditions was found by PXRD analyses to generate a phosphate phase [LnP3O9 or UP2O7) for all systems. The resultant nuclear waste fire contaminant particulates will impact both aerosol transport and toxicity assessments.

Trapped Intermediate of a Meerwein-Pondorf-Verley Reduction of Hydroxy Benzaldehyde to a Dialkoxide by Titanium Alkoxides.

A series of titanium alkoxides ([Ti(OR)4] (OR = OCH(CH3)2 (OPri), OC(CH3)3 (OBut), and OCH2C(CH3)3 (ONep)) were modified with a set of substituted hydroxyl-benzaldehydes [HO-BzA-Lx: x = 1, 2-hydroxybenzaldehyde (L = H), 2-hydroxy-3-methoxybenzaldehyde (OMe-3), 5-bromo-2-hydroxybenzaldehyde (Br-5), 2-hydroxy-5-nitrobenzaldehyde (NO2-5); x = 2, 3,5-di-tert-butyl-2-hydroxybenzaldehyde (But-3,5), 2-hydroxy-3,5-diiodobenzaldehyde (I-3,5)] in pyridine (py). Instead of the expected simple substitution, each of the HO-BzA-Lx modifiers were reduced to their respective diol [(py)(OR)2Ti(κ2(O,µ-O')(OC6H4-x(CH2O)-2)(L)x] (OR = OPri, x = 1, L = H (1a), OMe-3 (2a), Br-5 (3a·py), NO2-5 (4a·4py); x = 2, But-3,5 (5a), I-3,5 (6a), ONep; x = 1, L = H (1b), OMe-3 (2b), Br-5 (3b·py), NO2-5 (4b); x = 2, But-3,5 (5b), I-3,5 (6b·py)), as identified by single crystal X-ray studies. The 1H NMR spectral data were complex at room temperature but simplified at high temperatures (70 °C). Diffusion ordered spectroscopy (DOSY) NMR experiments indicated that 2a maintained the dinuclear structure in a solution independent of the temperature, whereas 2b appears to be monomeric over the same temperature range. On the basis of additional NMR studies, the mechanism of the reduction of the HO-BzA-Lx to the dioxide ligand was thought to occur by a Meerwein-Pondorf-Verley (MPV) mechanism. The structures of 1a-6b appear to be the intermediate dioxide products of the MPV reduction, which became "trapped" by the Lewis basic solvate.

Crystal structure of hy-droxy scandium nitrate chloride.

Each Sc3+ ion in the title salt, di-µ-hydroxido-bis-[tri-aqua-(nitrato-κ2 O,O')scandium(III)] dichloride, [Sc2(NO3)2(OH)2(H2O)6]Cl2, is coordinated by a nitrate anion, two hydroxide ions and three water mol-ecules to generate a distorted penta-gonal-bipyramidal ScO7 coordination polyhedron. The complete {[(NO3)(µ-OH)Sc(H2O)3]2}2+ ion is generated by crystallographic inversion symmetry. The nitrate anion binds in a bidentate fashion whereas the hydroxide ions are bridged between two Sc centers. Two charge-balancing Cl- ions are located in the outer sphere. In the extended structure, O-H⋯O and O-H⋯Cl hydrogen bonds connect the components into a three-dimensional network.

Synergistic Bimetallic Ni/Ag and Ni/Cu Catalysis for Regioselective γ,δ-Diarylation of Alkenyl Ketimines: Addressing ß-H Elimination by in Situ Generation of Cationic Ni(II) Catalysts.

We disclose unprecedented synergistic bimetallic Ni/Ag and Ni/Cu catalysts for regioselective γ,δ-diarylation of unactivated alkenes in simple ketimines with aryl halides and arylzinc reagents. The bimetallic synergy, which generates cationic Ni(II) species during reaction, promotes migratory insertion and transmetalation steps and suppresses ß-H elimination and cross-coupling, the major side reactions that cause serious problems during alkene difunctionalization. This diarylation reaction proceeds at remote locations to imines to afford, after simple H+ workup, diversely substituted γ,δ-diaryl ketones that are otherwise difficult to access readily with existing methods.

Synthesis, Characterization, and Nanomaterials Generated from 6,6'-(((2-Hydroxyethyl)azanediyl)bis(methylene))bis(2,4-di- tert-butylphenol) Modified Group 4 Metal Alkoxides.

The impact on the morphology nanoceramic materials generated from group 4 metal alkoxides ([M(OR)4]) and the same precursors modified by 6,6'-(((2-hydroxyethyl)azanediyl)bis(methylene))bis(2,4-di- tert-butylphenol) (referred to as H3-AM-DBP2 (1)) was explored. The products isolated from the 1:1 stoichiometric reaction of a series of [M(OR)4] where M = Ti, Zr, or Hf; OR = OCH(CH3)2(OPr i); OC(CH3)3(OBu t); OCH2C(CH3)3(ONep) with H3-AM-DBP2 proved, by single crystal X-ray diffraction, to be [(ONep)Ti( k4( O,O',O'',N)-AM-DBP2)] (2), [(OR)M(µ( O)- k3( O',O'',N)-AM-DBP2)]2 [M = Zr: OR = OPr i, 3·tol; OBu t, 4·tol; ONep, 5·tol; M = Hf: OR = OBu t, 6·tol; ONep, 7·tol]. The product from each system led to a tetradentate AM-DBP2 ligand and retention of a parent alkoxide ligand. For the monomeric Ti derivative (2), the metal was solved in a trigonal bipyramidal geometry, whereas for the Zr (3-5) and Hf (6, 7) derivatives a symmetric dinuclear complex was formed where the ethoxide moiety of the AM-DBP2 ligand bridges to the other metal center, generating an octahedral geometry. High quality density functional theory level gas-phase electronic structure calculations on compounds 2-7 using Gaussian 09 were used for meaningful time dependent density functional theory calculations in the interpretation of the UV-vis absorbance spectral data on 2-7. Nanoparticles generated from the solvothermal treatment of the ONep/AM-DBP2 modified compounds (2, 5, 7) in comparison to their parent [M(ONep)4] were larger and had improved regularity and dispersion of the final ceramic nanomaterials.

Synthesis and Characterization of Tris(trimethylsilyl)siloxide Derivatives of Early Transition Metal Alkoxides That Thermally Convert to Varied Ceramic-Silica Architecture Materials.

In an effort to generate single-source precursors for the production of metal-siloxide (MSiO x) materials, the tris(trimethylsilyl)silanol (H-SST or H-OSi(SiMe3)3 (1) ligand was reacted with a series of group 4 and 5 metal alkoxides. The group 4 products were crystallographically characterized as [Ti(SST)2(OR)2] (OR = OPr i (2), OBu t (3), ONep (4)); [Ti(SST)3(OBu n)] (5); [Zr(SST)2(OBu t)2(py)] (6); [Zr(SST)3(OR)] (OR = OBu t (7), ONep, (8)); [Hf(SST)2(OBu t)2] (9); and [Hf(SST)2(ONep)2(py) n] ( n = 1 (10), n = 2 (10a)) where OPr i = OCH(CH3)2, OBu t = OC(CH3)3, OBu n = O(CH2)3CH3, ONep = OCH2C(CH3)3, py = pyridine. The crystal structures revealed varied SST substitutions for: monomeric Ti species that adopted a tetrahedral ( T-4) geometry; monomeric Zr compounds with coordination that varied from T-4 to trigonal bipyramidal ( TBPY-5); and monomeric Hf complexes isolated in a TBPY-5 geometry. For the group 5 species, the following derivatives were structurally identified as [V(SST)3(py)2] (11), [Nb(SST)3(OEt)2] (12), [Nb(O)(SST)3(py)] (13), 2[H][(Nb(µ-O)2(SST))6(µ6-O)] (14), [Nb8O10(OEt)18(SST)2·1/5Na2O] (15), [Ta(SST)(µ-OEt)(OEt)3]2 (16), and [Ta(SST)3(OEt)2] (17) where OEt = OCH2CH3. The group 5 monomeric complexes were solved in a TBPY-5 arrangement, whereas the Ta of the dinculear 16 was solved in an octahedral coordination environment. Thermal analyses of these precursors revealed a stepwise loss of ligand, which indicated their potential utility for generating the MSiO x materials. The complexes were thermally processed (350-1100 °C, 4 h, ambient atmosphere), but instead of the desired MSiO x, transmission electron microscopy analyses revealed that fractions of the group 4 and group 5 precursors had formed unusual metal oxide silica architectures.

Dynamics of topological solitons, knotted streamlines, and transport of cargo in liquid crystals.

Active colloids and liquid crystals are capable of locally converting the macroscopically supplied energy into directional motion and promise a host of new applications, ranging from drug delivery to cargo transport at the mesoscale. Here we uncover how topological solitons in liquid crystals can locally transform electric energy to translational motion and allow for the transport of cargo along directions dependent on frequency of the applied electric field. By combining polarized optical video microscopy and numerical modeling that reproduces both the equilibrium structures of solitons and their temporal evolution in applied fields, we uncover the physical underpinnings behind this reconfigurable motion and study how it depends on the structure and topology of solitons. We show that, unexpectedly, the directional motion of solitons with and without the cargo arises mainly from the asymmetry in rotational dynamics of molecular ordering in liquid crystal rather than from the asymmetry of fluid flows, as in conventional active soft matter systems.

Synthesis and characterization of thallium-salen derivatives for use as underground fluid flow tracers.

A pair of thallium salen derivatives was synthesized and characterized for potential use as monitors (or taggants) or as models for Group 13 complexes for subterranean fluid flows. These precursors were isolated from the reaction of thallium ethoxide with N,N'-bis(3,5-di-tert-butylsalicylidene)-ethylenediamine (H2-salo-But), or N,N'-bis(3,5-di-tert-butylsalicylidene)-1,2-phenylenediamine (H2-saloPh-But). The products were identified by single crystal X-ray diffraction as: [((µ-O)2,κ1-(N)(N')salo-But)Tl2] (1) and {[((µ-O)2saloPh-But)Tl2][((µ-O)2,κ1-(N)(N')saloPh-But)Tl2]} (2). Both structures are similar, wherein each O atom of the salo moiety bridges the two Tl atoms, leading to a TlTl interaction, which is further stabilized by an intramolecular π-bond with neighboring phenyl rings. For 1, an additional TlN interaction was solved for each metal center; whereas, for 2, one of the two molecules in the matrix has a weak TlN interaction but no bonding noted in the other molecule. Both Density Functional Theory (DFT) calculations and variable temperature solution 205Tl NMR studies of 1 and 2 further confirmed the TlTl interaction. The UV-vis absorbance spectra of these compounds had an absorbance peak at 392 nm for 1 and a broad absorbance peak centered at 469 nm for 2, which were found to be in good agreement with the DFT calculated spectra that were dominated by the singlet state. Fluorescence emission and excitation studies reveal absorptions at 360 and 380 nm for 1 and 2, respectively, which are attributed to the TlTl metal centers. To demonstrate practicality, fluorescence spectra of 1 and 2 were obtained using a handheld 405 nm cw laser pointer and portable spectrometer where compound 1 was found to glow 15 times brighter than compound 2. Only compound 1 was found to survive the simulated deep-well conditions explored, which was attributed to the TlN interaction noted for 1 but not for 2.

Synthesis and Characterization of Structurally Diverse Alkaline-Earth Salen Compounds for Subterranean Fluid Flow Tracking.

A family of magnesium and calcium salen-derivatives was synthesized and characterized for use as subterranean fluid flow monitors. For the Mg complexes, di- n-butyl magnesium ([Mg(Bu n)2]) was reacted with N, N'-ethylene bis(salicylideneimine) (H2-salen), N, N'-bis(salicylidene)-1,2-phenylenediamine (H2-saloPh), N, N'-bis(3,5-di- t-butylsalicylidene)-ethylenediamine (H2-salo-Bu t), or N, N'-bis(3,5-di- t-butylsalicylidene)-1,2-phenylenediamine (H2-saloPh-Bu t), and the products were identified by single-crystal X-ray diffraction as [(κ3-(O,N,N'),µ-(O')saloPh)(µ-(O),(κ2-(N,N'),µ-(O')saloPh)2(µ-(O),κ3-(N,N',O')saloPh')Mg4]·2tol (1·2tol; saloPh' = an alkyl-modified saloPh derivative generated in situ), [(κ4-(O,N,N',O')saloPh)Mg(py)2]·py (2·py), [(κ4-(O,N,N',O')salo-Bu t)Mg(py)2] (3), [(κ4-(O,N,N',O')saloPh-Bu t)Mg(py)2]·tol (4·tol), and [(κ3-(O,N,N'),µ-(O')saloPh-Bu t)Mg]2 (5), where tol = toluene; py = pyridine. For the Ca species, a calcium amide was independently reacted with H2-salo-Bu t and H2-saloPh-Bu t to generate the crystallographcially characterized compounds: [(κ4-(O,N,N',O')salo-Bu t)Ca(py)3] (6), [(κ4-(O,N,N',O')saloPh-Bu t)Ca(py)3]·py (7·py). The bulk powders of these compounds were further characterized by a number of analytical tools, where 2-7 were found to be distinguishable by Fourier transform infrared and resonance Raman spectroscopies. Structural properties obtained from quantum calculations of gas-phase analogues are in good agreement with the single-crystal results. The potential utility of these compounds as taggants for monitoring subterranean fluid flows was demonstrated through a series of experiments to evaluate their stability to high temperature and pressure, interaction with mineral surfaces, and elution behavior from a loaded proppant pack.

End-On Bridging Dinitrogen Complex of Scandium.

The first (N═N)2- complex of a rare-earth metal with an end-on dinitrogen bridge, {K(crypt)}2{[(R2N)3Sc]2[µ-η1:η1-N2]} (crypt = 2.2.2-cryptand, R = SiMe3), has been isolated from the reduction of Sc(NR2)3 under dinitrogen at -35 °C and characterized by X-ray crystallography. The structure differs from the characteristic side-on structures previously observed for over 40 crystallographically characterized rare-earth metal (N═N)2- complexes of formula [A2Ln(THF)x]2[µ-η2:η2-N2] (Ln = Sc, Y, and lanthanides; x = 0, 1; A = anionic ligand such as amide, cyclopentadienide, and aryloxide). The 1.221(3) Å N-N distance and the 1644 cm-1 Raman stretch are consistent with the presence of an (N═N)2- bridge. The observed paramagnetism of the complex by Evans method measurements is consistent with DFT calculations that suggest a triplet (3A2) ground state in D3 symmetry involving two degenerate Sc-N2-Sc bonding orbitals. Upon brief exposure of the orange Sc3+ bridging dinitrogen complex to UV-light, photolysis to form the monomeric Sc2+ complex, [K(crypt)][Sc(NR2)3], was observed. Conversion of the Sc2+ complex to the Sc3+ dinitrogen complex was not observed with this crypt system, but it did occur with the 18-crown-6 (crown) analog which formed {K(crown)}2{[(R2N)3Sc]2[µ-η1:η1-N2]}. This suggests the importance of the alkali metal chelating agent in the reversibility of dinitrogen binding in this scandium system.