The Relationship of Perioperative Inadvertent Hypothermia with Anxiety and Comfort.

The study aimed to investigate the relationship of perioperative inadvertent hypothermia with anxiety and thermal and general comfort in surgical patients. Inadvertent perioperative hypothermia occurs after surgery and affects many patient outcomes. However, the relationship between hypothermia and anxiety has been given little attention. The research is of descriptive type. A total of 117 surgical patients who met the inclusion criteria were sampled and divided into two groups: hypothermic (n = 54) and normothermic (n = 63). Patients undergoing surgery were monitored for body temperature, systolic and diastolic blood pressure, heart rate, pain intensity, anxiety (Numeric Rating Scale [NRS] and State Anxiety Scale [SAI]), and comfort (Perianesthesia Comfort Questionnaire) levels. The groups were similar in terms of descriptive characteristics (p > 0.05). Among the patients undergoing surgical intervention, 46.1% were hypothermic. Compared with the normothermic group, the hypothermic group had significantly lower body temperature until the second postoperative hour, lower thermal comfort score until the third postoperative hour, and higher heart rate and anxiety (NRS) score until the first postoperative day. Furthermore, there was a significant difference between the groups in terms of pain intensity up to the first 30 minutes after surgery (p < 0.05). Moreover, there was no significant difference between the groups in terms of pre and postoperative day one anxiety (SAI) and Periantesthesia Comfort Scale mean scores (p > 0.05). The study findings showed that hypothermia affected thermal comfort up to the first 3 hours after surgery, pain intensity up to the first 30 minutes, and heart rate and anxiety (NRS) levels up to the first day.

Estimation of (Co) Variance Components and Genetic Parameters for Pre- and Post-Weaning Growth Traits in Dagliç Sheep.

The goal of this study was to estimate (co) variance components and genetic parameters for pre- and post-weaning growth traits in Dagliç sheep, considering the direct additive genetic, maternal genetic, and maternal permanent environmental effects, with different statistical models. The information of 21,735 native Dagliç lambs born between 2011 and 2021 was used to estimate (co) variance components by the Average Information-Restricted Maximum Likelihood algorithm. The results showed that the most suitable model was Model 3 for birth weight (BW), average daily gain (ADG), and weaning weight (WW). Model 4 was the most appropriate for weight at three (W3), weight at six (W6), and weight at twelve months of age (W12). The direct heritabilities for BW, W3, ADG, WW, W6, and W12 were 0.35 ± 0.02, 0.36 ± 0.03, 0.27 ± 0.02, 0.22 ± 0.02, 0.47 ± 0.05, and 0.47 ± 0.05, respectively. Genetic and phenotypic correlations amongst the traits were in the range of 0.103 ± 0.008 to 0.995 ± 0.002. These results can be used for the improvement of growth traits in the Dagliç breed of sheep through selection.

The comparative results of myostatin introgression from donor Texel to recipient Ramliç sheep with the aspects of growth, pre-, and post-slaughter carcass traits in the second backcross generation.

The aim of the study was to evaluate the growth, body and ultrasonic measurements and some carcass traits of purebred Ramliç, Texel and crossbred (87.5 % Ramliç and 12.5 % Texel) lambs in a marker-assisted introgression (MAI) project. The effects of some environmental factors such as genotype, sex, birth type, dam age, weaning age, and birth weight on growth, ultrasound measurements, and carcass traits were significant ( P < 0.05 ). There were no significant differences between pure Ramliç and its myostatin carrier ( + / - ) and non-carrier ( - / - ) second backcrosses (BC 2 ) for birth weight, daily live weight gain, and weaning weight. The BC 2 genotype ( + / - ) was statistically caught up with pure Ramliç for wither height, body length, and rump width. Differences in the longissimus muscle depth indicated that the BC 2 ( + / - ) genotypes tended to be better for both pure Ramliç and Texel lambs. Texel lambs were superior to Ramliç in the aspect of some carcass characteristics such as leg length, cold right-half carcass weight, foreleg weight in the left-half carcass, and muscle weight in the left leg. BC 2 ( + / - ) lambs were in the middle of both breeds for the traits. BC 2 lambs carrying myostatin did not vary from Ramliç morphologically. The new type of Ramliç was also closer to Texel in the aspect of carcass characteristics. In this connection, improvement of indigenous breeds could be achieved by MAI without changing the essential characteristics. For the summary, please visit http://www.mustafatekerli.com (last access: 14 June 2022).

An investigation of the effects of BMPR1B, BMP15, and GDF9 genes on litter size in Ramliç and Dagliç sheep.

This study was carried out to determine the presence of polymorphisms in genes affecting litter size. The SNPs in bone morphogenetic protein receptor type 1B (BMPR1B), bone morphogenetic protein 15 (BMP15), and growth differentiation factor 9 (GDF9) genes were detected in 60 uniparous and 60 multiparous ewes from Ramliç and Dagliç breeds. The ewes are maintained in nine public herds at the breeding station of the Afyonkarahisar Sheep and Goats Breeders' Association and lambed in two consecutive breeding seasons. PCR and DNA sequencing analyses were conducted, and 36, 4, and 11 SNPs in Ramliç and 40, 3, and 11 SNPs in Dagliç were detected in BMPR1B, BMP15, and GDF9 genes, respectively. A total of 16 SNPs in Ramliç and 10 SNPs in Dagliç breeds for three genes were found to be significant ( P < 0.05 ). The resulting analyses showed that four SNPs (g.49496G>A, c.1658A>C, c.2037C>T, c.2053C>T) of the BMPR1B gene and one deletion mutation (c.28_30delCTT) in the BMP15 gene of the Ramliç breed as well as five SNPs (c.1487C>A, c.2492C>T, c.2523G>A, c.2880A>G, and c.2763G>A) of the BMPR1B gene of the Dagliç breed have significant positive regression coefficients in the desired direction of the rare allele. The observed mutations have potential to be used as genetic markers in the selection of prolific animals for both breeds.

Characterization and source estimates of primary and secondary carbonaceous aerosols at urban and suburban atmospheres of Düzce, Turkey.

Düzce is one of the cities located in the western Black Sea region of Turkey with a population of 377,610 in 2017 (TUIK, 2017). There is no satisfying scientific information available to address the contribution of primary and secondary sources of carbonaceous aerosols to the observed PM10 levels in the city. The main objective of the study is to determine the levels and sources of carbonaceous aerosols in PM10. For this purpose, PM10 samples were collected at urban and suburban locations in Düzce during winter and summer season in 2015. Average summer OC and EC concentrations in the urban area were 9.5 and 1.3 µg m-3, respectively, while the corresponding concentrations were observed as 28.5 and 2.3 µg m-3, respectively for winter season. Summer mean OC and EC levels at the suburban site were 5.46 and 0.37 µg m-3, respectively, while those for winter were found as 6.68 and 0.61 µg m-3.The contributions of OC and EC to measured PM10 levels were found in the range of 10% to 60% and 1% to 7%, respectively, at the urban station while the associated contributions were in the range of 10% to 50% and 0.6% to 6%, respectively, at the suburban station. The concentrations measured during winter months in both areas were found to be higher than those measured during summer months. The EC tracer method was used in order to estimate the SOC contribution. The contribution of SOC concentrations to the total PM10 mass was found to be higher during winter in the urban area and during summer in the suburban area.

Atmospheric ambient trace element concentrations of PM10 at urban and sub-urban sites: source apportionment and health risk estimation.

In this study, PM10 concentrations and elemental (Al, Fe, Sc, V, Cr, Mn, Co, Ni, Cu, Zn, As, Se, Mo, Ag, Cd, Sn, Sb, Ba, Pb, and Bi) contents of particles were determined in Düzce, Turkey. The particulate matter samplings were carried out in the winter and summer seasons simultaneously in both urban and sub-urban sampling sites. The average PM10 concentration measured in the winter season was 86.4 and 27.3 µg/m3, respectively, in the urban and sub-urban sampling sites, while it was measured as 53.2 and 34.7 µg/m3 in the summer season. According to the results, it was observed that the PM10 levels and the element concentrations reached higher levels, especially at the urban sampling site, in the winter season. The positive matrix factorization model (PMF) was applied to the data set for source apportionment. Analysis with the PMF model revealed six factors for both the urban (coal combustion, traffic, oil combustion, industry, biomass combustion, and soil) and sub-urban (industry, oil combustion, traffic, road dust, soil resuspension, domestic heating) sampling sites. Loadings of grouped elements on these factors showed that the major sources of the elements in the atmosphere of Düzce were traffic, fossil fuel combustion, and metal industry-related emissions.

Determination of airborne trace elements in an urban area using lichens as biomonitor.

The amounts of elements emitted from industrial, domestic, and vehicle sources in Düzce through the analyses of lichens, which are bioindicators of air pollution, were determined in this research. Concentrations of Al, Fe, Cr, Mn, Co, Ni, Cu, Zn, As, V, Cd, Hg, and Pb in the lichens that were collected from 40 different points were analyzed using an inductively coupled plasma (ICP-MS) device. The highest concentration values were detected for Fe and Al, while the lowest concentration values were detected for Cd and Hg. Distribution maps of elements were created using geographic information systems. The distribution maps showed how the concentrations of elements for Düzce have changed across the city. According to our results, the elements sourced from traffic and combustion, such as Cr, Co, Ni, Cu, As, and V, have the highest concentrations in the city center near the traffic.

Determination of the personal, indoor and outdoor exposure levels of inorganic gaseous pollutants in different microenvironments in an industrial city.

We measured SO2, NO2 and O3 concentrations during the summer and winter in Kocaeli, Turkey. The sampling was carried out indoors and outdoors at homes, schools and offices. Personal samplers were also used to determine personal exposures to these pollutants. High NO2 and SO2 concentrations were observed in outdoor samples collected close to locations characterized by heavy urban traffic. Concentrations of O3, on the other hand, were higher in rural areas around the city due to ozone distillation. For both sampling periods, the concentrations of outdoor SO2 and O3 were higher than for indoor and personal samples; however, the NO2 concentrations were higher in indoor and personal samples, indicating that outdoor sources significantly contribute to indoor SO2 and O3 levels and that indoor NO2 concentrations are primarily modulated by sources within buildings. Seasonal variations in pollutant concentrations showed statistically significant differences. Indoor and outdoor concentrations of NO2 and SO2 measured in the winter were higher than the levels measured in the summer; O3 concentrations, on the other hand, exhibited the opposite trend. Active-to-passive concentration ratios for NO2, SO2 and O3 were 0.99, 1.08 and 1.16, respectively; the corresponding outdoor ratios were 0.95, 0.99 and 1.00.