Serum concentration trends and apparent half-lives of per- and polyfluoroalkyl substances (PFAS) in Australian firefighters.

BACKGROUND: Per- and polyfluoroalkyl substances (PFASs) are persistent manmade compounds used in aqueous film forming foam (AFFF). The extensive use of AFFF has led to widespread environmental PFAS contamination and exposures of firefighters. OBJECTIVES: To determine PFAS blood serum concentration trends and apparent serum half-lives in firefighters after the replacement of AFFF. METHODS: Current and former employees of an Australian corporation providing firefighting services, where AFFF formulations had been used since the 1980s up until 2010, were recruited in 2018-2019 to participate in this study. Special focus was put on re-recruiting participants who had provided blood samples five years prior (2013-2014). Participants were asked to provide a blood sample and fill in a questionnaire. Serum samples were analysed for 40 different PFASs using HP LC-MS/MS. RESULTS: A total of 799 participants provided blood samples in 2018-2019. Of these, 130 previously provided blood serum in 2013-2014. In 2018-2019, mean (arithmetic) serum concentrations of perfluorooctane sulfonate (PFOS, 27 ng/mL), perfluoroheptane sulfonate (PFHpS, 1.7 ng/mL) and perfluorohexane sulfonate (PFHxS, 14 ng/mL) were higher than the levels in the general Australian population. Serum concentrations were associated with the use of PFOS/PFHxS based AFFF. Participants who commenced service after the replacement of this foam had serum concentrations similar to those in the general population. Mean (arithmetic) individual apparent half-lives were estimated to be 5.0 years (perfluorooctanoic acid (PFOA)), 7.8 years (PFHxS), 7.4 years (PFHpS) and 6.5 years (PFOS). CONCLUSION: This study shows how workplace interventions such as replacement of AFFF can benefit employees at risk of occupational exposure.

Per- and polyfluoroalkyl substances (PFAS) in Australia: Current levels and estimated population reference values for selected compounds.

BACKGROUND: Increased public awareness of PFAS contamination in Australia has resulted in serum biomonitoring efforts in individuals in potentially affected communities. However, population-based reference values for assessing whether individual results exceed the typical range in the Australian general population are not currently available. OBJECTIVE: Estimate population upper bound reference values based on updated serum PFAS concentrations in pooled samples from southeast Queensland, Australia and population variation observed in the US National Health and Nutrition Examination Survey (NHANES) datasets. METHODS: We calculated ratios of 95th percentile to arithmetic mean (P95:AM ratios) using data from the NHANES 2013-14 and 2015-16 cycle samples for frequently detected PFASs: PFOA, linear and branched PFOS, perfluorononanoate (PFNA), perfluorodecanoate (PFDA), and perfluorohexanesulfonate (PFHxS). We estimated Australian age-specific means for PFAS using pooled serum samples collected in 2014-15 and 2016-17. We used the P95:AM ratios to estimate 95th percentile concentrations in the Australian population based on the results of the 2016-17 pooled samples. RESULTS AND CONCLUSIONS: P95:AM ratios for each PFAS were similar across NHANES cycle and age group, so overall compound-specific ratios were estimated for PFOA (2.1), PFNA (2.4), PFDA (2.7), PFHxS (2.7), and linear (2.4) and summed PFOS (2.3). Australian mean PFAS concentrations continued previously reported declining trends. The estimated P95 values can be used as preliminary substitutes for more rigorous population reference values to identify samples with clearly elevated serum PFAS concentrations in Australian biomonitoring efforts. Given uncertainties and variability inherent in this evaluation, the estimated P95 values should be interpreted with caution. Mean and estimated P95 serum PFAS concentrations in Australia should continue to be monitored to document declining trends in population serum concentrations.

Investigations on the possible impact of a glyphosate-containing herbicide on ruminal metabolism and bacteria in vitro by means of the 'Rumen Simulation Technique'.

AIMS: This study was performed in a well-established in vitro model to investigate whether the application of a glyphosate-containing herbicide might affect the bacterial communities and some biochemical parameters in a cow's rumen. METHODS AND RESULTS: The test item was applied in two concentrations (high and low) for 5 days. In a second trial, fermentation vessels were inoculated with Clostridium sporogenes before the high dose was applied. Effluents were analysed by biochemical, microbiological and genetic methods. A marginal increase in short-chain fatty acid production and a reduction in NH3 -N were observed. There were minor and rather equivocal changes in the composition of ruminal bacteria but no indications of a shift towards a more frequent abundance of pathogenic Clostridia species. Clostridium sporogenes counts declined consistently. CONCLUSIONS: No adverse effects of the herbicide on ruminal metabolism or composition of the bacterial communities could be detected. In particular, there was no evidence of a suspected stimulation of Clostridia growth. SIGNIFICANCE AND IMPACT OF THE STUDY: Antibiotic activity of glyphosate resulting in microbial imbalances has been postulated. In this exploratory study, however, intraruminal application of concentrations reflecting potential exposure of dairy cows or beef cattle did not exhibit significant effects on bacterial communities in a complex in vitro system. The low number of replicates (n = 3/dose) may leave some uncertainty.

Virulence and resistance determinants of German Staphylococcus aureus ST398 isolates from nonhuman sources.

A series of 100 Staphylococcus aureus isolates ascribed to sequence type 398 (ST398) and recovered from different sources (healthy carrier and diseased pigs, dust from pig farms, milk, and meat) in Germany were investigated for their virulence and antimicrobial resistance genetic background. Antimicrobial resistance was determined by the disk diffusion method. Virulence and resistance determinants (37 and 31 genes, respectively) were tested by PCR. Only two virulence profiles, including the accessory gene regulator agrI and three or four hemolysin-encoding genes, were detected. In contrast, 33 resistance profiles were distinguished (only 11 were shown by more than one isolate). Fifty-nine isolates were multiresistant (four or more antimicrobial classes), and 98 were methicillin resistant (mecA positive). All of the ST398 isolates showed resistance to tetracycline [encoded by tet(M) alone or together with tet(K) and/or tet(L)]. In addition, 98% were resistant to other antimicrobials, including macrolide-lincosamine-streptogramin B (70%, encoded by ermA, ermB, and ermC, alone or in combination), trimethoprim (65%, mostly due to dfrK and dfrG), kanamycin and gentamicin [29% and 14%, respectively, mainly related to aac(6')-Ie-aph(2″)-Ia and/or ant(4')-Ia but also to aph(3')-IIIa], chloramphenicol (9%, fexA or cfr), quinupristin-dalfopristin (9%), ciprofloxacin (8%), and trimethoprim-sulfamethoxazole (4%). The heterogeneity of the resistance profiles underlines the ability of the ST398 clone to acquire multiple antimicrobial resistance genes. However, the virulence gene content of the tested isolates was low. Continuous surveillance is needed to clarify whether its pathogenicity potential for animals and humans will increase over time.

High heterogeneity within methicillin-resistant Staphylococcus aureus ST398 isolates, defined by Cfr9I macrorestriction-pulsed-field gel electrophoresis profiles and spa and SCCmec types.

During recent years, the animal-associated methicillin-resistant Staphylococcus aureus clone ST398 has extensively been studied. The DNA of these isolates turned out to be refractory to SmaI restriction, and consequently, SmaI is unsuitable for subtyping this clone by standard pulsed-field gel electrophoresis (PFGE). Very recently, ST398 DNA was shown to be digested by Cfr9I, a neoschizomer of SmaI. In the present study, we employed Cfr9I PFGE on 100 German and 5 Dutch ST398 isolates and compared their PFGE profiles, protein A gene variable repeat regions (spa types), and types of the staphylococcal cassette chromosome mec (SCCmec). The isolates (from healthy carrier pigs, clinical samples from pigs, dust from farms, milk, and meat) were assigned to 35 profiles, which were correlated to the SCCmec type. A dendrogram with the Cfr9I patterns assigned all profiles to two clusters. Cluster A grouped nearly all isolates with SCCmec type V, and cluster B comprised all SCCmec type IVa and V* (a type V variant first identified as III) carriers plus one isolate with SCCmec type V. Both clusters also grouped methicillin-susceptible S. aureus isolates. The association of the majority of isolates with SCCmec type V in one large cluster indicated the presence of a successful subclone within the clonal complex CC398 from pigs, which has diversified. In general, the combination of Cfr9I PFGE with spa and SCCmec typing demonstrated the heterogeneity of the series analyzed and can be further used for outbreak investigations and traceability studies of the MRSA ST398 emerging clone.

Prevalence of MRSA types in slaughter pigs in different German abattoirs.

To investigate the prevalence of types of meticillin-resistant Staphylococcus aureus (MRSA) in slaughter pigs in German abattoirs, nasal swabs were collected from a total of 1026 pigs in five abattoirs after stunning in the course of two studies, and examined for MRSA. Study 1 included four abattoirs; study 2 was carried out in one large abattoir. Isolates were tested for antimicrobial susceptibility and characterised using spa-typing, multilocus sequence typing (MLST) and typing of the staphylococcal cassette chromosome, SCCmec. Overall, MRSA was isolated from 70.8 per cent of 520 samples in study 1 and from 49.0 per cent of 506 samples in study 2. The proportion of positive samples varied substantially between the abattoirs in study 1. Most isolates belonged to spa-types t011 and t034 and SCCmec types III and V. MLST of selected isolates revealed that they were all MLST ST398. Besides beta-lactams, 100 per cent of the isolates were resistant to tetracycline, 80.5 per cent were resistant to erythromycin and 80.7 per cent were resistant to clindamycin. Less than 5 per cent of the isolates were resistant to other antimicrobials.

Towards an integrated approach in supporting microbiological food safety decisions.

Decisions on food safety involve consideration of a wide range of concerns including the public health impact of foodborne illness, the economic importance of the agricultural sector and the food industry, and the effectiveness and efficiency of interventions. To support such decisions, we propose an integrated scientific approach combining veterinary and medical epidemiology, risk assessment for the farm-to-fork food chain as well as agricultural and health economy. Scientific advice is relevant in all stages of the policy cycle: to assess the magnitude of the food safety problem, to define the priorities for action, to establish the causes for the problem, to choose between different control options, to define targets along the food chain and to measure success.

[Risk assessment of foodborne infections]. / Risikobewertung bei durch Lebensmittel übertragene Infektionen.

The microbiological risk assessment during production, processing and treatment of foods illustrates an important basis for the judgement of the safety of food products. Since the mid-nineties the concept of risk analysis according to Codex Alimentarius requirements ist pursued more intensely. Risk assessment is part of the risk analysis process besides risk management and risk communication. A strict separation between risk management and assessment should lead to a systematic, scientifically based and independent process without considering economic or political constraints whereas the decision on protective measures or the acceptance of risks lies in the responsibility of the managers. Risk assessment can only be successfully implemented in an interdisciplinary approach between physicians, veterinarians, microbiologists, molecularbiologists, food technologists, epidemiologists and mathematicians. Surveillance, monitoring programs and other data collections on a variety of parameters like statistics on foodborne human cases, the prevalence of zoonotic agents in animals, the distribution of micro-organisms in the environment and in foods, the behaviour of micro-organisms during food processing and the consumption habits of consumers deliver the necessary data for risk assessors. With the aim of mathematic modelling and simulation it is possible to calculate the probability of health problems in humans after the consumption of a foodstuff contaminated with a specific pathogenic micro-organism.