Controlling Spontaneous Orientation Polarization in Organic Semiconductors─The Case of Phosphine Oxides.

Upon film growth by physical vapor deposition, the preferential orientation of polar organic molecules can result in a nonzero permanent dipole moment (PDM) alignment, causing a macroscopic film polarization. This effect, known as spontaneous orientation polarization (SOP), was studied in the case of different phosphine oxides (POs). We investigate the control of SOP by molecular design and film-growth conditions. Our results show that using less polar POs with just one phosphor-oxygen bond yields an exceptionally high degree of SOP with the so-called giant surface potential (slope), reaching more than 150 mV nm-1 in a neat bis-4-(N-carbazol(yl)phenyl)phenyl phosphine oxide (BCPO) film grown at room temperature. Additionally, by altering the evaporation rate and substrate temperature, we are able to control the SOP magnitude over a broad range from 0 to almost 300 mV nm-1. Diluting BCPO in a nonpolar host enhances the PDM alignment only marginally, but combining temperature control with dipolar doping can result in highly aligned molecules with more than 80% of their PDMs standing upright on the substrate on average.

Zwitterionic Carbazole Ligands Enhance the Stability and Performance of Perovskite Nanocrystals in Light-Emitting Diodes.

We introduce a new carbazole-based zwitterionic ligand (DCzGPC) synthesized via Yamaguchi esterification which enhances the efficiency of lead halide perovskite (LHP) nanocrystals (NCs) in light-emitting diodes (LED). A facile ligand exchange of the native ligand shell, monitored by nuclear magnetic resonance (NMR), ultraviolet-visible (UV-vis), and photoluminescence (PL) spectroscopy, enables more stable and efficient LHP NCs. The improved stability is demonstrated in solution and solid-state LEDs, where the NCs exhibit prolonged luminescence lifetimes and improved luminance, respectively. These results represent a promising strategy to enhance the stability of LHP NCs and to tune their optoelectronic properties for further application in LEDs or solar cells.

Spectroscopic analysis of vibrational coupling in multi-molecular excited states.

Multi-molecular excited states accompanied by intra- and inter-molecular geometric relaxation are commonly encountered in optical and electrooptical studies and applications of organic semiconductors as, for example, excimers or charge transfer states. Understanding the dynamics of these states is crucial to improve organic devices such as light emitting diodes and solar cells. Their full microscopic description, however, demands sophisticated tools such as ab initio quantum chemical calculations which come at the expense of high computational costs and are prone to errors by assumptions as well as iterative algorithmic procedures. Hence, the analysis of spectroscopic data is often conducted at a phenomenological level only. Here, we present a toolkit to analyze temperature dependent luminescence data and gain first insights into the relevant microscopic parameters of the molecular system at hand. By means of a Franck-Condon based approach considering a single effective inter-molecular vibrational mode and different potentials for the ground and excited state we are able to explain the luminescence spectra of such multi-molecular states. We demonstrate that by applying certain reasonable simplifications the luminescence of charge transfer states as well as excimers can be satisfactorily reproduced for temperatures ranging from cryogenics to above room temperature. We present a semi-classical and a quantum-mechanical description of our model and, for both cases, demonstrate its applicability by analyzing the temperature dependent luminescence of the amorphous donor-acceptor heterojunction tetraphenyldibenzoperiflanthene:C60 as well as polycrystalline zinc-phthalocyanine to reproduce the luminescence spectra and extract relevant system parameters such as the excimer binding energy.

Quantum Efficiency Enhancement of Lead-Halide Perovskite Nanocrystal LEDs by Organic Lithium Salt Treatment.

Surface-defect passivation is key to achieving a high photoluminescence quantum yield in lead halide perovskite nanocrystals. However, in perovskite light-emitting diodes, these surface ligands also have to enable balanced charge injection into the nanocrystals to yield high efficiency and operational lifetime. In this respect, alkaline halides have been reported to passivate surface trap states and increase the overall stability of perovskite light emitters. On the one side, the incorporation of alkaline ions into the lead halide perovskite crystal structure is considered to counterbalance cation vacancies, whereas on the other side, the excess halides are believed to stabilize the colloids. Here, we report an organic lithium salt, viz. LiTFSI, as a halide-free surface passivation on perovskite nanocrystals. We show that treatment with LiTFSI has multiple beneficial effects on lead halide perovskite nanocrystals and LEDs derived from them. We obtain a higher photoluminescence quantum yield and a longer exciton lifetime and a radiation pattern that is more favorable for light outcoupling. The ligand-induced dipoles on the nanocrystal surface shift their energy levels toward a lower hole-injection barrier. Overall, these effects add up to a 4- to 7-fold boost of the external quantum efficiency in proof-of-concept LED structures, depending on the color of the used lead halide perovskite nanocrystal emitters.

Effect of a twin-emitter design strategy on a previously reported thermally activated delayed fluorescence organic light-emitting diode.

In this work we showcase the emitter DICzTRZ in which we employed a twin-emitter design of our previously reported material, ICzTRZ. This new system presented a red-shifted emission at 488 nm compared to that of ICzTRZ at 475 nm and showed a comparable photoluminescence quantum yield of 57.1% in a 20 wt % CzSi film versus 63.3% for ICzTRZ. The emitter was then incorporated within a solution-processed organic light-emitting diode that showed a maximum external quantum efficiency of 8.4%, with Commission Internationale de l'Éclairage coordinate of (0.22, 0.47), at 1 mA cm-2.

Are the rates of dexter transfer in TADF hyperfluorescence systems optically accessible?

Seemingly not, but for unexpected reasons. Combining the triplet harvesting properties of TADF materials with the fast emission rates and colour purity of fluorescent emitters is attractive for developing high performance OLEDs. In this "hyperfluorescence" approach, triplet excitons are converted to singlets on the TADF material and transferred to the fluorescent material by long range Förster energy transfer. The primary loss mechanism is assumed to be Dexter energy transfer from the TADF triplet to the non-emissive triplet of the fluorescent emitter. Here we use optical spectroscopy to investigate energy transfer in representative emissive layers. Despite observing kinetics that at first appear consistent with Dexter quenching of the TADF triplet state, transient absorption, photoluminescence quantum yields, and comparison to phosphor-sensitised "hyperphosphorescent" systems reveal that this is not the case. While Dexter quenching by the fluorescent emitter is likely still a key loss mechanism in devices, we demonstrate that - despite initial appearances - it is inoperative under optical excitation. These results reveal a deep limitation of optical spectroscopy in characterizing hyperfluorescent systems.

Coupled Organic-Inorganic Nanostructures with Mixed Organic Linker Molecules.

The electronic properties of semiconducting inorganic lead sulfide (PbS) nanocrystals (NCs) and organic linker molecules are dependent on the size of NCs as well as the used ligands. Here, we demonstrate that a weakly binding ligand can be successfully attached to PbS NCs to form a coupled organic-inorganic nanostructure (COIN) by mixing with a strong binding partner. We use the weakly binding zinc ß-tetraaminophthalocyanine (Zn4APc) in combination with the strongly binding 1,2-ethanedithiol (EDT) as a mixed ligand system and compare its structural, electronic, and (photo-)electrical properties with both single-ligand COINs. It is found that binding of Zn4APc is assisted by the presence of EDT leading to improved film homogeneity, lower trap density, and enhanced photocurrent of the derived devices. Thus, the mixing of ligands is a versatile tool to achieve COINs with improved performance.

Corrigendum: What Controls the Orientation of TADF Emitters?

[This corrects the article DOI: 10.3389/fchem.2020.00750.].

Optical and Electrical Measurements Reveal the Orientation Mechanism of Homoleptic Iridium-Carbene Complexes.

Understanding and controlling the driving forces for molecular alignment in optoelectronic thin-film devices is of crucial importance for improving their performance. In this context, the preferential orientation of organometallic iridium complexes is in the focus of research to benefit from their improved light-outcoupling efficiencies in organic light-emitting diodes (OLEDs). Although there has been great progress concerning the orientation behavior for heteroleptic Ir complexes, the mechanism behind the alignment of homoleptic complexes is still unclear yet. In this work, we present a sky-blue phosphorescent dye that shows variable alignment depending on systematic modifications of the ligands bound to the central iridium atom. From an optical study of the transition dipole moment orientation and the electrically accessible alignment of the permanent dipole moment, we conclude that the film morphology is related to both the aspect ratio of the dye and the local electrostatic interaction of the ligands with the film surface during growth. These results indicate a potential strategy to actively control the orientation of iridium-based emitters for the application in OLEDs.

What Controls the Orientation of TADF Emitters?

Thermally-activated delayed fluorescence (TADF) emitters-just like phosphorescent ones-can in principle allow for 100% internal quantum efficiency of organic light-emitting diodes (OLEDs), because the initially formed electron-hole pairs in the non-emissive triplet state can be efficiently converted into emissive singlets by reverse intersystem crossing. However, as compared to phosphorescent emitter complexes with their bulky-often close to spherical-molecular structures, TADF emitters offer the advantage to align them such that their optical transition dipole moments (TDMs) lie preferentially in the film plane. In this report, we address the question which factors control the orientation of TADF emitters. Specifically, we discuss how guest-host interactions may be used to influence this parameter and propose an interplay of different factors being responsible. We infer that emitter orientation is mainly governed by the molecular shape of the TADF molecule itself and by the physical properties of the host-foremost, its glass transition temperature Tg and its tendency for alignment being expressed, e.g., as birefringence or the formation of a giant surface potential of the host. Electrostatic dipole-dipole interactions between host and emitter are not found to play an important role.

Manipulating the Transition Dipole Moment of CsPbBr3 Perovskite Nanocrystals for Superior Optical Properties.

Colloidal cesium lead halide perovskite nanocrystals exhibit unique photophysical properties including high quantum yields, tunable emission colors, and narrow photoluminescence spectra that have marked them as promising light emitters for applications in diverse photonic devices. Randomly oriented transition dipole moments have limited the light outcoupling efficiency of all isotropic light sources, including perovskites. In this report we design and synthesize deep blue emitting, quantum confined, perovskite nanoplates and analyze their optical properties by combining angular emission measurements with back focal plane imaging and correlating the results with physical characterization. By reducing the dimensions of the nanocrystals and depositing them face down onto a substrate by spin coating, we orient the average transition dipole moment of films into the plane of the substrate and improve the emission properties for light emitting applications. We then exploit the sensitivity of the perovskite electronic transitions to the dielectric environment at the interface between the crystal and their surroundings to reduce the angle between the average transition dipole moment and the surface to only 14° and maximize potential light emission efficiency. This tunability of the electronic transition that governs light emission in perovskites is unique and, coupled with their excellent photophysical properties, introduces a valuable method to extend the efficiencies and applications of perovskite based photonic devices beyond those based on current materials.

Correlating Optical and Electrical Dipole Moments To Pinpoint Phosphorescent Dye Alignment in Organic Light-Emitting Diodes.

Understanding the morphology of organic materials within optoelectronic thin film devices is of crucial importance for the development of state-of-the-art organic light emitting diodes (OLEDs). In this context, the preferential alignment of organometallic Ir complexes has been in the focus of research to benefit from the improved light-outcoupling efficiencies. Although the emissive dipole orientation has been identified from an optical point of view and molecular dynamic simulations give first insights into film morphologies, new experimental techniques are necessary to pinpoint the exact alignment of phosphorescent dye molecules. In this work, optical characterization of luminescent thin films was combined with electrical measurements on bilayer devices to elucidate the orientation distribution of both, electrical and optical dipole moments of phosphorescent guest-host systems. The results not only confirm previous suggestions for the alignment mechanism of organometallic dyes but also disclose a direct correlation between the degree of electrical and optical dipole alignment, thus opening a roadway for achieving higher light-outcoupling efficiency in OLEDs.

Evidence for Anisotropic Electronic Coupling of Charge Transfer States in Weakly Interacting Organic Semiconductor Mixtures.

We present a comprehensive investigation of the charge-transfer (CT) effect in weakly interacting organic semiconductor mixtures. The donor-acceptor pair diindenoperylene (DIP) and N,N'-bis(2-ethylhexyl)-1,7-dicyanoperylene-3,4/9,10-bis(dicarboxyimide) (PDIR-CN2) has been chosen as a model system. A wide range of experimental methods was used in order to characterize the structural, optical, electronic, and device properties of the intermolecular interactions. By detailed analysis, we demonstrate that the partial CT in this weakly interacting mixture does not have a strong effect on the ground state and does not generate a hybrid orbital. We also find a strong CT transition in light absorption as well as in photo- and electroluminescence. By using different layer sequences and compositions, we are able to distinguish electronic coupling in-plane vs out-of-plane and, thus, characterize the anisotropy of the CT state. Finally, we discuss the impact of CT exciton generation on charge-carrier transport and on the efficiency of photovoltaic devices.

Tunable Anisotropic Photon Emission from Self-Organized CsPbBr3 Perovskite Nanocrystals.

We report controllable anisotropic light emission of photons originating from vertically aligned transition dipole moments in spun-cast films of CsPbBr3 nanocubes. By depositing films of nanocrystals on precoated substrates we can control the packing density and resultant radiation pattern of the emitted photons. We develop a technical framework to calculate the average orientation of light emitters, i.e., the angle between the transition dipole moment vector (TDM) and the substrate. This model is applicable to any emissive material with a known refractive index. Theoretical modeling indicates that oriented emission originates from an anisotropic alignment of the valence band and conduction band edge states on the ionic crystal lattice and demonstrates a general path to model the experimentally less accessible internal electric field of a nanosystem from the photoluminescent anisotropy. The uniquely accessible surface of the perovskite nanoparticles allows for perturbation of the normally isotropic emissive transition. The reported sensitive and tunable TDM orientation and control of emitted light will allow for applications of perovskite nanocrystals in a wide range of photonic technologies inaccessible to traditional light emitters.

Tuning the Microcavity of Organic Light Emitting Diodes by Solution Processable Polymer-Nanoparticle Composite Layers.

In this study, we present a simple method to tune and take advantage of microcavity effects for an increased fraction of outcoupled light in solution-processed organic light emitting diodes. This is achieved by incorporating nonscattering polymer-nanoparticle composite layers. These tunable layers allow the optimization of the device architecture even for high film thicknesses on a single substrate by gradually altering the film thickness using a horizontal dipping technique. Moreover, it is shown that the optoelectronic device parameters are in good agreement with transfer matrix simulations of the corresponding layer stack, which offers the possibility to numerically design devices based on such composite layers. Lastly, it could be shown that the introduction of nanoparticles leads to an improved charge injection, which combined with an optimized microcavity resulted in a maximum luminous efficacy increase of 85% compared to a nanoparticle-free reference device.

Understanding and predicting the orientation of heteroleptic phosphors in organic light-emitting materials.

Controlling the alignment of the emitting molecules used as dopants in organic light-emitting diodes is an effective strategy to improve the outcoupling efficiency of these devices. To explore the mechanism behind the orientation of dopants in films of organic host materials, we synthesized a coumarin-based ligand that was cyclometalated onto an iridium core to form three phosphorescent heteroleptic molecules, (bppo)2Ir(acac), (bppo)2Ir(ppy) and (ppy)2Ir(bppo) (bppo represents benzopyranopyridinone, ppy represents 2-phenylpyridinate, and acac represents acetylacetonate). Each emitter was doped into a 4,4'-bis(N-carbazolyl)-1,1'-biphenyl host layer, and the resultant orientation of their transition dipole moment vectors was measured by angle-dependent p-polarized photoluminescent emission spectroscopy. In solid films, (bppo)2Ir(acac) is found to have a largely horizontal transition dipole vector orientation relative to the substrate, whereas (ppy)2Ir(bppo) and (bppo)2Ir(ppy) are isotropic. We propose that the inherent asymmetry at the surface of the growing film promotes dopant alignment in these otherwise amorphous films. Modelling the net orientation of the transition dipole moments of these materials yields general design rules for further improving horizontal orientation.

Thermally driven smoothening of molecular thin films: Structural transitions in n-alkane layers studied in real-time.

We use thermal annealing to improve smoothness and to increase the lateral size of crystalline islands of n-tetratetracontane (TTC, C44H90) films. With in situ x-ray diffraction, we find an optimum temperature range leading to improved texture and crystallinity while avoiding an irreversible phase transition that reduces crystallinity again. We employ real-time optical phase contrast microscopy with sub-nm height resolution to track the diffusion of TTC across monomolecular step edges which causes the unusual smoothing of a molecular thin film during annealing. We show that the lateral island sizes increase by more than one order of magnitude from 0.5 µm to 10 µm. This desirable behavior of 2d-Ostwald ripening and smoothing is in contrast to many other organic molecular films where annealing leads to dewetting, roughening, and a pronounced 3d morphology. We rationalize the smoothing behavior with the highly anisotropic attachment energies and low surface energies for TTC. The results are technically relevant for the use of TTC as passivation layer and as gate dielectric in organic field effect transistors.

Extraction of surface plasmons in organic light-emitting diodes via high-index coupling.

The efficiency of organic light-emitting diodes (OLEDs) is still limited by poor light outcoupling. In particular, the excitation of surface plasmon polaritons (SPPs) at metal-organic interfaces represents a major loss channel. By combining optical simulations and experiments on simplified luminescent thin-film structures we elaborate the conditions for the extraction of SPPs via coupling to high-index media. As a proof-of-concept, we demonstrate the possibility to extract light from wave-guided modes and surface plasmons in a top-emitting white OLED by a high-index prism.

Light extraction from surface plasmons and waveguide modes in an organic light-emitting layer by nanoimprinted gratings.

Organic light-emitting diodes (OLEDs) usually exhibit a low light outcoupling efficiency because a large fraction of power is lost to surface plasmons (SPs) and waveguide modes. In this paper it is demonstrated that periodic grating structures with almost µm-scale can be used to extract SPs as well as waveguide modes and therefore enhance the outcoupling efficiency in light-emitting thin film structures. The gratings are fabricated by nanoimprint lithography using a commercially available diffraction grating as a mold which is pressed into a polymer resist. The outcoupling of SPs and waveguide modes is detected in fluorescent organic films adjacent to a thin metal layer in angular dependent photoluminescence measurements. Scattering up to 5th-order is observed and the extracted modes are identified by comparison to the SP and waveguide dispersion obtained from optical simulations. In order to demonstrate the low-cost, high quality and large area applicability of grating structures in optoelectronic devices, we also present SP extraction using a grating structure fabricated by a common DVD stamp.