Data supporting the in situ synthesis by organometallic method of Vulcan supported PdNi nanostructures for hydrogen evolution reaction in alkaline solution.

This document presents the supporting information for the evaluation of the role of Ni amount during the in situ synthesis of vulcan supported PdNi nanostructures using an organometallic approach for hydrogen evolution reaction in alkaline medium [1]. The data here presented included analysis of deconvolution during structural characterization, chemical composition and transmission electron microscopy. The information also contains complement data of cyclic voltammograms during activation in alkaline media. Supplement data of electrochemical impedance spectroscopy measurements at two different overpotentials (-100 and -300 mV) and temperatures on the onset potential for hydrogen evolution reaction (HER) are also showed in this paper. The files can be used as a reference to determinate the effect of adding different in situ amount of Ni to Pd/C catalysts in presence of 2 equivalents of hexadecylamine (HDA) in order to improve the electrochemical performance on HER using an adjusted organometallic method. The data provided in this article have not been previously published and are available to enable critical or extended analyses.

Dataset of operating conditions to Isolate Cellulose Nanocrystalline from Sugarcane Bagasse and Pinewood Sawdust as Possible Material to Fabricate Polymer Electrolyte Membranes.

The data shown in this document provides all the experimental data that complement the article published in Carbohydrate Polymers entitled "Influence of operating conditions on Proton Conductivity of Nanocellulose films using two Agroindustrial Wastes: Sugarcane Bagasse and Pinewood Sawdust" [1]. The data of this paper are the result of a large series of experiments to optimize the extraction of cellulose nanocrystalline (CNC) from these two agro-industrial wastes: sugarcane Bagasse (SCB) and pinewood sawdust (PSW). The conditions of pretreatment (5 wt.% or 10 wt.% of NaOH) and hydrolysis temperature (60, 75 and 90°C) in an aqueous solution of 45 wt.% of H2SO4 were analyzed exhaustively. The data includes the characterization by Fourier transform infrared (FT-IR), Differential Scanning Calorimetry/Thermogravimetric Analysis (DSC/TGA), Dynamic Light Scattering (DLS), X-ray diffraction (XRD) patterns, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM) micrographs with their corresponding SAED patterns and nanoindentation tests. Additionally, photographs during the isolation of cellulose nanocrystalline in dependence of the syntheses parameters. It is also included the data that complement the molecular dynamic simulation generated by GLYCAM carbohydrate builder based on the coordinates for alpha and beta cellulose considering a microfibril of 5, 10 and 20 glucosyl residues (degree of polymerization, DP). Overall data have not been previously published and are available contributing to a better understanding of the CNCs isolation through different pretreatment concentrations and temperatures of processing.

Influence of operating conditions on proton conductivity of nanocellulose films using two agroindustrial wastes: Sugarcane bagasse and pinewood sawdust.

Cellulose nanocrystals (CNCs) were isolated from two-agroindustrial wastes: sugarcane bagasse (SCB) and pinewood sawdust (PWS), to analyze their chemical, structural, morphological, and proton conduction properties in dependence of the synthesis parameters. In both sources, the isolated CNCs correspond to the monoclinic phase of cellulose type I and II. For SCB, the smallest CNCs were isolated, in a range of 3-10 nm, with 5 wt.% of NaOH and 60 °C of acid hydrolysis. PWS displayed the smallest sizes at 75 °C and 10 wt.% NaOH (40-110 nm). Membrane characterization suggests that isolated CNCs, between 75 and 90 °C of acid hydrolysis and 10 wt.% NaOH from both SCB and PWS sources, displayed an important increase in the proton conductivity, 1.23(±0.61)×10-5 and 9.26 (±0.24)×10-5 S-m-1, respectively. Thus, with proper synthesis conditions, CNCs can be potentially used as based element to obtain other proton conductor materials to fabricate PEMs.

Data that support the structural, chemical and morphological characterization and its influence on the electrochemical performance of stabilized PdxPt1-x alloys as electrode materials for methanol oxidation in alkaline medium.

Structural, compositional, morphological and electrochemical characterization are important to determinate the influence of platinum in the methanol oxidation in alkaline media. These data and analysis support the research article catalytic performance of alloyed PtxPd1-x nanostructures supported on Vulcan XC-72R for the methanol oxidation in alkaline medium [1]. The data here presented included changes in the chemical composition, structure and microstructure. Also, complement data of cyclic voltammograms during activation in alkaline media as well as in presence of 1 M CH3OH to observe CO tolerance and Electrochemical Impedance Spectroscopy measurements at two different overpotentials (0.2 and 0.3 mV) on the onset potential for methanol electro-oxidation are published in this paper. The data can be used as a reference to determinate the effect of added different amounts of Pd to Pt/C catalysts, using an organometallic compounds method and octylamine as stabilizer. The data provided in this article have not been previously published and are available to enable critical or extended analyses.