Preparations for a European R&D roadmap for an inertial fusion demo reactor.

A European consortium of 15 laboratories across nine nations have worked together under the EUROFusion Enabling Research grants for the past decade with three principle objectives. These are: (a) investigating obstacles to ignition on megaJoule-class laser facilities; (b) investigating novel alternative approaches to ignition, including basic studies for fast ignition (both electron and ion-driven), auxiliary heating, shock ignition, etc.; and (c) developing technologies that will be required in the future for a fusion reactor. A brief overview of these activities, presented here, along with new calculations relates the concept of auxiliary heating of inertial fusion targets, and provides possible future directions of research and development for the updated European Roadmap that is due at the end of 2020. This article is part of a discussion meeting issue 'Prospects for high gain inertial fusion energy (part 2)'.

Demonstration of Scale-Invariant Rayleigh-Taylor Instability Growth in Laser-Driven Cylindrical Implosion Experiments.

Rayleigh-Taylor instability growth is shown to be hydrodynamically scale invariant in convergent cylindrical implosions for targets that varied in radial dimension and implosion timescale by a factor of 3. The targets were driven directly by laser irradiation providing a short impulse, and instability growth at an embedded aluminum interface occurs as it converges radially inward by a factor of 2.25 and decelerates on a central foam core. Late-time growth factors of 14 are observed for a single-mode m=20 azimuthal perturbation at both scales, despite the differences in laser drive conditions between the experimental facilities, consistent with predictions from radiation-hydrodynamics simulations. This platform enables detailed investigations into the limits of hydrodynamic scaling in high-energy-density systems.

First Liquid Layer Inertial Confinement Fusion Implosions at the National Ignition Facility.

The first cryogenic deuterium and deuterium-tritium liquid layer implosions at the National Ignition Facility (NIF) demonstrate D_{2} and DT layer inertial confinement fusion (ICF) implosions that can access a low-to-moderate hot-spot convergence ratio (1230) DT ice layer implosions. Although high CR is desirable in an idealized 1D sense, it amplifies the deleterious effects of asymmetries. To date, these asymmetries prevented the achievement of ignition at the NIF and are the major cause of simulation-experiment disagreement. In the initial liquid layer experiments, high neutron yields were achieved with CRs of 12-17, and the hot-spot formation is well understood, demonstrated by a good agreement between the experimental data and the radiation hydrodynamic simulations. These initial experiments open a new NIF experimental capability that provides an opportunity to explore the relationship between hot-spot convergence ratio and the robustness of hot-spot formation during ICF implosions.

Linear dependence of surface expansion speed on initial plasma temperature in warm dense matter.

Recent progress in laser-driven quasi-monoenergetic ion beams enabled the production of uniformly heated warm dense matter. Matter heated rapidly with this technique is under extreme temperatures and pressures, and promptly expands outward. While the expansion speed of an ideal plasma is known to have a square-root dependence on temperature, computer simulations presented here show a linear dependence of expansion speed on initial plasma temperature in the warm dense matter regime. The expansion of uniformly heated 1-100 eV solid density gold foils was modeled with the RAGE radiation-hydrodynamics code, and the average surface expansion speed was found to increase linearly with temperature. The origin of this linear dependence is explained by comparing predictions from the SESAME equation-of-state tables with those from the ideal gas equation-of-state. These simulations offer useful insight into the expansion of warm dense matter and motivate the application of optical shadowgraphy for temperature measurement.

Visualization of expanding warm dense gold and diamond heated rapidly by laser-generated ion beams.

With the development of several novel heating sources, scientists can now heat a small sample isochorically above 10,000 K. Although matter at such an extreme state, known as warm dense matter, is commonly found in astrophysics (e.g., in planetary cores) as well as in high energy density physics experiments, its properties are not well understood and are difficult to predict theoretically. This is because the approximations made to describe condensed matter or high-temperature plasmas are invalid in this intermediate regime. A sufficiently large warm dense matter sample that is uniformly heated would be ideal for these studies, but has been unavailable to date. Here we have used a beam of quasi-monoenergetic aluminum ions to heat gold and diamond foils uniformly and isochorically. For the first time, we visualized directly the expanding warm dense gold and diamond with an optical streak camera. Furthermore, we present a new technique to determine the initial temperature of these heated samples from the measured expansion speeds of gold and diamond into vacuum. We anticipate the uniformly heated solid density target will allow for direct quantitative measurements of equation-of-state, conductivity, opacity, and stopping power of warm dense matter, benefiting plasma physics, astrophysics, and nuclear physics.

Uniform heating of materials into the warm dense matter regime with laser-driven quasimonoenergetic ion beams.

In a recent experiment at the Trident laser facility, a laser-driven beam of quasimonoenergetic aluminum ions was used to heat solid gold and diamond foils isochorically to 5.5 and 1.7 eV, respectively. Here theoretical calculations are presented that suggest the gold and diamond were heated uniformly by these laser-driven ion beams. According to calculations and SESAME equation-of-state tables, laser-driven aluminum ion beams achievable at Trident, with a finite energy spread of ΔE/E∼20%, are expected to heat the targets more uniformly than a beam of 140-MeV aluminum ions with zero energy spread. The robustness of the expected heating uniformity relative to the changes in the incident ion energy spectra is evaluated, and expected plasma temperatures of various target materials achievable with the current experimental platform are presented.

Prompt radiochemistry at the National Ignition Facility (invited).

Understanding mix in inertial confinement fusion (ICF) experiments at the National Ignition Facility requires the diagnosis of charged-particle reactions within an imploded target. Radiochemical diagnostics of these reactions are currently under study by scientists at Los Alamos and Lawrence Livermore National Laboratories. Measurement of these reactions requires assay of activated debris and tracer gases from the target. Presented below is an overview of the prompt radiochemistry diagnostic development efforts, including a discussion of the reactions of interest as well as the progress being made to collect and count activated material.

Diagnosing ignition with DT reaction history.

A full range DT reaction history of an ignition capsule, from 10(9) to 10(20) neutronsns, offers the opportunity to diagnose fuel conditions hundreds of picoseconds before and during burn. The burn history begins with a sharp rise when the first shock reaches the center of the capsule. The level of this jump reflects the combined shock strength and the adiabat of DT fuel. Changes to the four laser pulses driving the capsule implosion which are large enough to degrade the yield make measurable changes to the reaction history. Low mode asymmetries grow during convergence but change the reaction history during the final approximately 100 ps. High mode asymmetry or turbulence mixing affects only the reaction history within approximately 50 ps of peak burn rate. A capsule with a tritium fuel layer containing a small amount of deuterium (approximately 1%) creates a reaction history similar to the ignition capsule, but without the final ignition burn. A combination of gas Cerenkov detectors and the neutron temporal diagnostic could be capable of diagnosing the full history of ignition and tritium rich capsules.

N-Substituted (2,3-dihydro-1,4-benzodioxin-2-yl)methylamine derivatives as D(2) antagonists/5-HT(1A) partial agonists with potential as atypical antipsychotic agents.

A series of N-substituted 1-(2,3-dihydro-1, 4-benzodioxin-2-yl)methylamine derivatives with D(2) antagonist/5-HT(1A) partial agonist activity has been prepared as potential atypical antipsychotic agents. Optimization of in vitro receptor binding activity and in vivo activity in rodent models of psychosis has led to compound 24, which showed good affinities for human D(2), D(3), and 5-HT(1A) receptors but significantly less affinity for human alpha(1) adrenoceptors and rat H(1) and muscarinic receptors. In rodents, 24 showed functional D(2)-like antagonism and 5-HT(1A) partial agonism. After oral dosing, 24 showed good activity in rodent antipsychotic tests and very little potential to cause extrapyramidal side effects (EPS), as measured by its ability to induce catalepsy in rats only at very high doses. In the light of this promising profile of activity, 24 has been selected for clinical investigation as a novel antipsychotic agent with a predicted low propensity to cause EPS.

Uvulopalatopharyngoplasty may compromise nasal CPAP therapy in sleep apnea syndrome.

Uvulopalatopharyngoplasty (U3P) has been advocated for treatment of snoring and sleep apnea/hypopnea syndrome (SAHS), but often it does not effect a cure, so that other therapy (CPAP) is often required. We hypothesized that patients with U3P will have increased mouth air leak during CPAP because of loss of the soft palatal seal. This may result in decreased tolerance and compliance if CPAP therapy is required after U3P. We have therefore compared CPAP tolerance in 13 awake normal male subjects, 13 male patients with SAHS and 13 male patients treated with U3P, all naive to CPAP and matched for age and body mass index. All normal subjects and patients with SAHS were able to tolerate pressures of at least 20 cm H2O without mouth air leak or appreciable discomfort. In contrast male U3P patients started to leak air via the mouth at a mean CPAP pressure of 6.8 (SD, 2.4) cm H2O and were able to tolerate a mean maximal pressure of only 14.5 (SD, 2.6) cm H2O, which was significantly less than that in the other two groups (p < 0.001). We also examined nasal CPAP compliance (machine run time) in eight patients with SAHS who had previous U3P compared with 16 patients with SAHS without U3P. Both groups were matched for age, body mass index, and apnea/hypopnea index. Patients with U3P had significantly lower compliance (mean, 3.5 h/night) compared with patients without U3P (mean, 5.7 h/night), p = 0.01. We conclude that U3P may compromise nasal CPAP therapy by increasing mouth air leak and reducing the maximal level of pressure that can be tolerated.

Comparison of polysomnography with ResCare Autoset in the diagnosis of the sleep apnoea/hypopnoea syndrome.

BACKGROUND: Increasing referral numbers make the development of simplified accurate methods of diagnosing the sleep apnoea/hypopnoea syndrome highly desirable. The accuracy of one such system--the ResCare Autoset--has been examined. METHODS: Thirty one consecutive patients assessed by polysomnography had simultaneous monitoring of their respiratory pattern using the Autoset system. The Autoset detects episodes of flattening of the flow/time profile using nasal cannulae. RESULTS: There was a good correlation (r = 0.85) between the number of apnoeas+hypopnoeas/hour in bed recorded using polysomnography and the Autoset system. The median difference in such events was 3.1 (95% confidence interval 8.4 to -1.6)/hour in bed. In two patients the Autoset scored 70 apnoeas+hypopnoeas/hour in bed compared with 34 apnoeas+hypopnoeas with 35 arousals/hour in bed by polysomnography; however, this did not alter the diagnostic category of either patient. Autoset gave a sensitivity of 100%, specificity of 92%, positive predictive value of 92%, and negative predictive value of 100%, which was better than oximetry alone. A sleep study using the Autoset system costs 14 pounds compared with 126 pounds for polysomnography. CONCLUSIONS: The Autoset is clinically useful for diagnosing the sleep apnoea/hypopnoea syndrome.

Every consultation has an ethical component.

KIE: Analyzing the scenario of a large, poor family's request to be added to the patient list of three British National Health Service physicians, Bradley demonstrates how even routine practice decisions can have ethical components. One partner labels the family as potentially heavy users of medical care and recommends that it be referred elsewhere. The second doctor suggests adding the family to their list on a trial basis, while the third thinks it should be accepted without reservations. They use concepts of duty, justice, utilitarianism, rights, nonmaleficence, and professional ideals in arguing their positions. Ultimately, Bradley concludes, the question is one of physician versus patient autonomy.^ieng

The respiratory tract immune system in the pig. I. Distribution of immunoglobulin-containing cells in the respiratory tract mucosa.

The number of cells containing immunoglobulins A, G and M in the respiratory tract mucosa of pigs from birth to maturity was assessed using the immunoperoxidase technique. Immunoglobulin-containing cells first appeared at 6-7 days of age and rose rapidly to reach levels at 3-4 weeks similar to those in the adult. IgA-containing cells predominated at all sites in all age groups, although there were significant proportions of cells containing IgM and IgG. Our findings suggest that IgA is transported into secretions via the mixed mucoserous glands of the nasal and tracheobronchial mucosa, and that this route is also operative for colostral IgA absorbed from the gut in the baby pig.