Polymer-like structures of LiSCN, NaSCN, KSCN, RbSCN, and CsSCN complexes with an armed monoaza-15-crown-5 ether bearing a 3',5'-difluoro-4'-hydroxybenzyl group.

Structures of LiSCN, NaSCN, KSCN, RbSCN, and CsSCN complexes with 3',5'-difluoro-4'-hydroxybenzyl-armed monoaza-15-crown-5 ether (5) were investigated. The Li+ and Na+ complexes are (1:1)n polymer-like complexes bridged by hydrogen bonding. On the other hand, the K+, Rb+, and Cs+ complexes are polymer-like complexes bridged by the fluorine atoms of the side arms. The titration calorimetry and 19F NMR titration experiments suggest that one or both fluorine atoms along with the oxygen atom of the phenolic OH group coordinate to the alkali metal ions incorporated in the crown part of a second armed ligand to give polymer-like complexes in solution. The FAB-MS data indicated that larger alkali metal ions form more stable polymer-like complexes.

Efficient immobilization of a cadmium chemosensor in a thin film: generation of a cadmium sensor prototype.

[reaction: see text] The development of an ion-selective chemosensor for Cd(2+) allows generation of a "real-time" sensor. Immobilization of the chemosensor on quartz was achieved in a simple monolayer and in a thin film using a polymer intermediary. As intended, the thin film contains much more chemosensor than the monolayer and provides measurable responses to aqueous Cd(2+) concentrations below 1 microM. Alkali and alkaline earth ions do not interfere with Cd(2+) sensing; Zn(2+) and Cu(2+) are potential interferents.

Application of diaza-18-crown-6-capped beta-cyclodextrin bonded silica particles as chiral stationary phases for ultrahigh pressure capillary liquid chromatography.

Two bonded chiral stationary phases (CSPs), 8-aminoquinoline-2-ylmethyl- and 8-aminoquinoline-7-ylmethyl-diaza-18-crown-6-capped [3-(2-O-beta-cyclodextrin)-2-hydroxypropoxy]propylsilyl silica particles (non-porous, 1.5 microm), have been prepared and evaluated using capillary liquid chromatography at high pressures (> or = 8000 p.s.i.). High column efficiency (up to 400 000 plates m(-1)) was achieved for chiral separations. These CSPs with two recognition sites, i.e. substituted-diaza-18-crown-6 and beta-cyclodextrin combined with high chromatographic efficiency provide good resolution of a variety of enantiomers and positional isomers in relatively short times under reversed-phase conditions. After inclusion of a Ni (II) ion from the mobile phase, the positively charged crown ether-capped beta-cyclodextrin facilitates specific static, dipolar, and host-guest complexation interactions with solutes.

Copolymeric (lR-trans)-N,N'-1,2-cyclohexylene-bisbenzamide oligodimethylsiloxane chiral stationary phase for gas chromatography.

A copolymeric stationary phase, consisting of a chiral selective part, i.e. (1R-trans)-N,N'-1,2-cyclohexylenebisbenzamide, and an efficient siloxane oligomeric part, was successfully applied to open tubular column GC analysis. The efficiency and the chiral selectivity of this stationary phase were studied in detail, and high capacity and efficiency at elevated GC temperatures were especially noted. Several drugs and other enantiomeric pairs were separated. The shown examples demonstrate a broad application range for this type of chiral stationary phase in GC analysis.

New Tetraazacrown Ethers Containing Two Pyridine, Quinoline, 8-Hydroxyquinoline, or 8-Aminoquinoline Sidearms.

A series of macrocyclic tetraazacrown ethers containing two pyridine, quinoline, 8-hydroxyquinoline, or 8-aminoquinoline sidearms has been prepared. Crab-like cyclization of bis(alpha-chloroacetamide)s and diamines followed by reduction of the cyclic diamides was used to synthesize the selected crown ethers containing two unsubstituted macroring nitrogen atoms. The preparation of the macrocycles with sidearms was accomplished by reductive amination of the proper aldehydes with the crown ethers using sodium triacetoxyborohydride (NaBH(OAc)(3)) as the reducing agent. The 8-hydroxyquinoline- and 8-aminoquinoline-containing macrocycles were synthesized by reductive amination of 8-acetoxyquinoline-2-carboxaldehyde or 8-nitroquinoline-2-carboxaldehyde followed by removing the acetate groups or reducing the nitro groups to amino groups, respectively. Complexation of ligand 22 with Cu(2+), Co(2+), Ni(2+), Zn(2+), Cd(2+), and Pb(2+) was evaluated potentiometrically in aqueous solution (0.10 M Me(4)NCl) at 25 degrees C. Ligand 22 formed very stable complexes with these metal ions. The UV-vis spectra of 22 and its complexes were examined in an aqueous acetic acid buffer solution (pH 5). The 22-Cu(2+) complex provided a new absorption band at 258 nm.

Syntheses and Metal Ion Complexation of Novel 8-Hydroxyquinoline-Containing Diaza-18-Crown-6 Ligands and Analogues.

Ten new 8-hydroxyquinoline-containing diaza-18-crown-6 ligands and analogues were synthesized via a one-pot or stepwise Mannich reaction, reductive amination, or by reacting diaza-18-crown-6 with 5,7-dichloro-2-iodomethyl-8-quinolinol in the presence of N,N-diisopropylethylamine. The Mannich reaction of N,N'-bis(methoxymethyl)diaza-18-crown-6 with 4-chloro-2-(1H-pyrazol-3-yl)phenol gave the NCH(2)N-linked bis(3-(5-chloro-2-hydroxy)pyrazol-1-ylmethyl)-substituted diazacrown ether (14) in a 98% yield. The reaction of bis(N,N'-methoxymethyldiaza)-18-crown-6 with 2.2 equiv of 10-hydroxybenzoquinoline gave only the monosubstituted diazacrown ether ligand (8). Interaction of some of the ligands with various metal ions was evaluated by a calorimetric titration technique at 25 degrees C in MeOH. Bis(8-hydroxyquinoline-2-ylmethyl)-substituted ligand 13 forms a very strong complex with Ba(2+) (log K = 11.6 in MeOH) and is highly selective for Ba(2+) over Na(+), K(+), Zn(2+), and Cu(2+) (selectivity factor > 10(6)). The (1)H NMR spectral studies of the Ba(2+) complexes with bis(8-hydroxyquinoline-2-ylmethyl)- and bis(5,7-dichloro-8-hydroxyquinoline-2-ylmethyl)-substituted diaza-18-crown-6 ligands (13 and 10) suggest that these complexes are cryptate-like structures with the two overlapping hydroxyquinoline rings forming a pseudo second macroring. UV-visible spectra of the metal ion complexes with selected ligands suggest that these ligands might be used as chromophoric or fluorophoric sensors.

Novel Method to Prepare Dihydroxy Permethylated beta-Cyclodextrin Isomeric Intermediates for Bifunctional Enzyme Mimics.

Natural beta-cyclodextrin was treated with 3.5 equiv of tert-butyldimethylsilyl chloride and then with NaH and MeI in the same reaction vessel to give a mixture of oligosilyl-substituted permethylated beta-cyclodextrins. The mixture was treated with NH(4)F and the resulting 6(A),6(D)-(1), 6(A),6(C)-(2), and 6(A),6(B)-(3) dihydroxy permethylated beta-cyclodextrins were isolated in 7.6-8.9% yields by two silica gel chromatographic separations. The structures of 1-3 were verified by comparison of spectral properties with a known diol (2) or preparing known derivatives (1 and 3). This is a superior way to prepare and isolate dihydroxy permethylated beta-cyclodextrin intermediates for bifunctional enzyme mimics.

Synthesis and Properties of 5-Chloro-8-hydroxyquinoline-Substituted Azacrown Ethers: A New Family of Highly Metal Ion-Selective Lariat Ethers.

New 5-chloro-8-hydroxyquinoline (CHQ)-substituted aza-18-crown-6 (4), diaza-18-crown-6 (1), diaza-21-crown-7 (2), and diaza-24-crown-8 (3) ligands, where CHQ was attached through the 7-position, and aza-18-crown-6 (11) and diaza-18-crown-6 (10) macrocycles, where CHQ was attached through the 2-position, were prepared. Thermodynamic quantities for complexation of these CHQ-substituted macrocycles with alkali, alkaline earth, and transition metal ions were determined in absolute methanol at 25.0 degrees C by calorimetric titration. Two isomers, 1 and 10, which are different only in the attachment positions of the CHQ to the parent macroring, exhibit remarkable differences in their affinities toward the metal ions. Compound 1 forms very stable complexes with Mg(2+), Ca(2+), Cu(2+), and Ni(2+) (log K = 6.82, 5.31, 10.1, and 11.4, respectively), but not with the alkali metal ions. Ligand 10 displays strong complexation with K(+) and Ba(2+) (log K = 6.61 and 12.2, respectively) but not with Mg(2+) or Cu(2+). The new macrocycles and their complexes have been characterized by means of UV-visible and (1)H NMR spectra and X-ray crystallography. New peaks in the UV spectrum of the Mg(2+)-1 complex could allow an analytical determination of Mg(2+) in very dilute solutions in the presence of other alkali and alkaline earth metal cations. (1)H NMR spectral and X-ray crystallographic studies indicate that ligand 10 forms a cryptate-like structure when coordinated with K(+) and Ba(2+), which induces an efficient overlap of the two hydroxyquinoline rings. Such overlapping forms a pseudo second macroring that results in a significant increase in both complex stability and cation selectivity.

Self-Inclusion Complexes Derived from Cyclodextrins: Synthesis and Characterization of 6(A),6(B)-Bis-O-[p-(allyloxy)phenyl]-Substituted beta-Cyclodextrins.

The syntheses, structures, and spectroscopic properties of 6(A),6(B)-bis-O-[p-(allyloxy)phenyl]-substituted beta-cyclodextrins have been investigated. Selective activation of the 6(A),6(B)-hydroxy groups was carried out by treating heptakis(2,3-di-O-methyl)-beta-cyclodextrin (1) with 2,4-dimethoxybenzene-1,5-disulfonyl chloride to give 6(A),6(B)-bissulfonate ester 2 in a yield of only 3%. This material was treated with sodium p-(allyloxy)phenoxide in DMF to form 6(A),6(B)-bis-O-[p-(allyloxy)phenyl]-heptakis(2,3-di-O-methyl)-beta-cyclodextrin (3), which had two isomers. One (3A) has the two p-(allyloxy)phenyl arms directed away from the cyclodextrin cavity, and the other (3B) has one of the p-(allyloxy)phenyl groups through the cavity to form a self-inclusion complex. When either 3A or 3B was treated with methyl iodide and sodium hydride, the resulting permethylated 6(A),6(B)-bis-O-[p-(allyloxy)phenyl]heptakis(2,3-di-O-methyl)-6(C),6(D),6(E),6(F),6(G)-penta-O-methyl-beta-cyclodextrin (4) was composed of two isomers, in which 4B is a self-inclusion complex. 3A and 3B also can be converted into a mixture of 3A and 3B in strong base but not when melted in the absence of base. 4A and 4B do not isomerize. Detailed 1D and 2D NMR spectroscopic studies were carried out to characterize the structures of these new compounds, and molecular mechanics techniques were used to explain the experimental facts.

Mannich Reaction as a Key Strategy for the Synthesis of Benzoazacrown Ethers and Benzocryptands.

A convenient method for the synthesis of mono- and polycyclic azacrown macrocycles containing aromatic fragments using the Mannich condensation of phenols and secondary diamines has been studied. This new approach allowed the synthesis of bisphenols connected by oligoazaoxaalkane units in good yields without the need to protect the phenolic OH groups. These bisphenols (13-16) were alkylated with ditosylates of polyethylene glycols to give benzoazacrown ethers 25-30. Intermediate bisphenols 13-15 were also treated with three bis(methoxymethyl)-substituted diamines to form benzoazacrowns 10-12 containing internal phenolic functions. Phenol-containing mono- (11) and bicyclic (3, n = 1) compounds, which were synthesized via the Mannich aminomethylation process, were used as building blocks for construction of bi- (32) and tricyclic (33) ligands.

Chiral Pyridine-Based Macrobicyclic Clefts: Synthesis and Enantiomeric Recognition of Ammonium Salts.

An achiral (3) and two chiral pyridine-based macrobicyclic clefts (4 and 5) have been prepared by treating 2,6-bis[[2',6'-bis(bromomethyl)-4'-methylphenoxy]methyl]pyridine (2) with the appropriate achiral and chiral glycols. Starting 2 was prepared by first treating 2,6-bis(hydroxymethyl)-4-methylphenol with 2,6-[(tosyloxy)methyl]pyridine followed by phosphorus tribromide. Achiral macrobicyclic cleft 3 formed a complex at 25 degrees C in 50% CH(3)OH/50% CHCl(3) (v/v) with a primary ammonium salt (log K = 3.15) as evidenced by a significant change in the (1)H NMR spectrum. Highly organized (S,S,S,S)-4, prepared by treating 2 with (1S,5S)-3-oxapentane-1,5-diol, exhibited recognition at 25 degrees C in 20% C(2)H(5)OH/80% 1,2-C(2)H(4)Cl(2) (v/v) for the (S)-enantiomer of alpha-(1-naphthyl)ethylammonium perchlorate (NapEt) over its (R)-form (Delta log K = 0.85). This high recognition factor probably reflects an increase in molecular rigidity by the introduction of a second macro ring on the monocyclic pyridinocrown ligand.