Ceramic hydroxyapatite foam as a new material for Bisphenol A removal from contaminated water.

Ceramic hydroxyapatite foam (CF-HAP) was prepared by combining slip-casting and foaming methods. The prepared CF-HAP was characterized by scanning electron microscopy (SEM), physisorption of N2, Fourier transforms infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The results of the specific surface area and SEM analyses revealed that the used shaping method provides CF-HAP with a wide range of porosity including macro and mesopores. Based on FTIR and XRD analyses, the CF-HAP is similar to pure well-crystallized hydroxyapatite. The adsorption results revealed that 94% of the BPA with a concentration of (40 mg/L) was effectively removed from the water and that the maximum adsorption capacity was higher in acidic than in basic medium. The thermodynamic studies indicated that the adsorption reaction was spontaneous and endothermic in nature. The adsorption capacity increased with the temperature and the BPA is chemisorbed on the ceramic foam. The isotherm data fitted slightly better with the Liu than with the Freundlich and Langmuir models suggesting that the adsorption was homogeneous and occurred only in the monolayer. The adsorption process depends largely on the BPA concentration and the results fitted well with the pseudo-first-order model. This confirms that the interaction between the BPA and the CF-HAP was mainly chemical in nature. The FTIR analysis of the used and fresh CF-HAP showed that all the hydroxyl and phosphorus bands characteristic of the hydroxyapatite shifted after adsorption of Bisphenol A. This suggests that the adsorption of Bisphenol A occurred in the sites of the hydroxyapatite. Therefore, it can be concluded that the CF-HAP has the potential to be used as an adsorbent for wastewater treatment and purification processes.

Catalytic wet air oxidation of high BPA concentration over iron-based catalyst supported on orthophosphate.

The catalytic performance of Fe supported on nickel phosphate (NiP) was evaluated for the removal of bisphenol A (BPA) by catalytic wet air oxidation (CWAO) at 140 °C and 25 bar of pure oxygen pressure. The prepared NiP and Fe/NiP materials were fully characterized by XRD, N2-physisorption, H2-TPR, TEM, and ICP analysis. Iron (Fe/NiP) impregnation of NiP support enhanced the BPA removal efficiency from 37.0 to 99.6% when CWAO was performed. This catalyst was highly stable given the operating conditions of acidic medium, high temperature, and high pressure. The Fe/NiP catalyst showed an outstanding catalytic activity for oxidation of BPA, achieving almost complete removal of BPA in 180 min at a concentration of 300 mg/L, using 4 g/L of Fe/NiP. No iron leaching was detected after the CWAO of BPA. The stability of Fe/NiP was performed over three consecutive cycles, noting that BPA conversion was not affected and iron leaching was negligible. Therefore, this catalyst (Fe/NiP) could be considered as an innocuous and effective long-lasting catalyst for the oxidation of harmful organic molecules.

Porous carbon materials derived from olive kernels: application in adsorption of organic pollutants.

Adsorption of organic pollutants (OPs), bisphenol A, and diuron, from aqueous solutions onto porous carbon materials (CMs) prepared from olive kernels, have been investigated. The effects of initial pH, initial OP concentration, temperature, and contact time on the adsorption capacity were studied. The adsorption of bisphenol A and diuron onto CMs was found to be optimal at pH 5.6 and 6.9, respectively. It was noticed that the adsorption of those organic pollutants from aqueous solution declined with increasing temperature and the process is exothermic. The rate of adsorption followed the second order kinetic equation. The equilibrium results showed that Langmuir model fits well with the data. The maximum adsorption capacities obtained using the best CM were 476 and 434 mg g-1 for BPA and diuron, respectively. The results showed that CMs made from olive kernels are an excellent and inexpensive biomass waste-derived sorbent. Graphical abstract.

Photocatalysis and catalytic wet air oxidation: Degradation and toxicity of bisphenol A containing wastewaters.

Bisphenol A (BPA) is a commonly used chemical in consumer products. It is an endocrine disrupter that has potentially significant negative effects on human health. The use and chemical stability of BPA have resulted in the appearance of the chemical in wastewaters. Since the current wastewater treatment technologies are not effective enough to remove BPA, new methods to degrade BPA are required. In this paper, we report the efforts made towards developing a bi-functional catalyst for consecutive catalytic wet air oxidation-photocatalytic water treatment. It was found that 2.5% Pt/Ti0.8Ce0.2O2 is a potential bi-functional catalyst for the consecutive treatment. Concentration and toxicity of BPA were successfully reduced by catalytic wet air oxidation. Although BPA was further reduced by photocatalysis, it was not reflected in further decrease of cell toxicity. Thus wet-air oxidation combined with photocatalysis is a promising approach for the reduction of BPA.

Structured carbon foam derived from waste biomass: application to endocrine disruptor adsorption.

In this paper, a novel structured carbon foam has been prepared from argan nut shell (ANS) was developed and applied in bisphenol A (BPA) removal from water. The results showed that the prepared carbon foam remove 93% of BPA (60 mg/L). The BPA equilibrium data obeyed the Liu isotherm, displaying a maximum uptake capacity of 323.0 mg/g at 20 °C. The calculated free enthalpy change (∆H° = - 4.8 kJ/mol) indicated the existence of physical adsorption between BPA and carbon foam. Avrami kinetic model was able to explain the experimental results. From the regeneration tests, we conclude that the prepared carbon foam has a good potential to be used as an economic and efficient adsorbent for BPA removal from contaminated water. Based on these results and the fact that the developed structured carbon foam is very easy to separate from treated water, it can serve as an interesting material for real water treatment applications.

Steam activation of waste biomass: highly microporous carbon, optimization of bisphenol A, and diuron adsorption by response surface methodology.

Highly microporous carbons were prepared from argan nut shell (ANS) using steam activation method. The carbons prepared (ANS@H2O-30, ANS@H2O-90, and ANS@H2O-120) were characterized using X-ray diffraction, scanning electron microscopy, Fourier-transform infrared, nitrogen adsorption, total X-ray fluorescence, and temperature-programmed desorption (TPD). The ANS@H2O-120 was found to have a high surface area of 2853 m2/g. The adsorption of bisphenol A and diuron on ANS@H2O-120 was investigated. The isotherm data were fitted using Langmuir and Freundlich models. Langmuir isotherm model presented the best fit to the experimental data suggesting micropore filling of ANS@H2O-120. The ANS@H2O-120 adsorbent demonstrated high monolayer adsorption capacity of 1408 and 1087 mg/g for bisphenol A and diuron, respectively. The efficiency of the adsorption was linked to the porous structure and to the availability of the surface adsorption sites on ANS@H2O-120. Response surface method was used to optimize the removal efficiency of bisphenol A and diuron on ANS@H2O-120 from aqueous solution. Graphical abstract ᅟ.

Toward new benchmark adsorbents: preparation and characterization of activated carbon from argan nut shell for bisphenol A removal.

The use of argan nut shell as a precursor for producing activated carbon was investigated in this work. Two activated carbons AC-HP and AC-Na were prepared from argan nut shell by chemical activation method using phosphoric acid (H3PO4) and sodium hydroxide (NaOH), respectively. Textural, morphological, and surface chemistry characteristics were studied by nitrogen physisorption, TGA, SEM, TXRF, FTIR, XRD, and by determining the pHPZC of the AC-HP. The adsorption experiments revealed that AC-HP was more efficient in adsorption of BPA due to high specific surface area (1372 m2/g) compared to AC-Na (798 m2/g). The obtained adsorption data of BPA on AC-HP correlated well with the pseudo-second-order model and the Langmuir isotherm (Qmax = 1250 mg/g at 293 K). The thermodynamic parameters (ΔG° < 0, ΔH° < 0, and ΔS° < 0) indicate that adsorption of BPA on AC-HP was spontaneous and exothermic in nature. The regeneration of AC-HP showed excellent results after 5 cycles (95-93%). This work does not only provide a potential way to use argan nut shell but also represents a sustainable approach to synthesize AC-HP, which might be an ideal material for various applications (energy storage, catalysis, and environmental remediation).

Removal of oxygenated volatile organic compounds by catalytic oxidation over Zr-Ce-Mn catalysts.

The composition-activity relationship of Zr-Ce-Mn-O materials was investigated for the catalytic removal of Oxygenated Volatile Organic Compounds (OVOC) emitted by stationary sources. Using a sol-gel method, very high surface specific areas, small crystallite sizes and high redox properties were obtained for Zr(0.4)Ce(0.6-x)Mn(x)O(2) catalytic systems after calcination at 500°C. The textural and redox properties were improved when Mn content increased in the material, especially for x=0.36. As a result the most active and selective catalyst in the butanol (model of OVOC) oxidation was obtained for the nominal composition Zr(0.4)Ce(0.24)Mn(0.36)O(2) due to a high oxygen mobility and surface Mn(4+) concentration.