Roadmap on optical sensors.

Optical sensors and sensing technologies are playing a more and more important role in our modern world. From micro-probes to large devices used in such diverse areas like medical diagnosis, defence, monitoring of industrial and environmental conditions, optics can be used in a variety of ways to achieve compact, low cost, stand-off sensing with extreme sensitivity and selectivity. Actually, the challenges to the design and functioning of an optical sensor for a particular application requires intimate knowledge of the optical, material, and environmental properties that can affect its performance. This roadmap on optical sensors addresses different technologies and application areas. It is constituted by twelve contributions authored by world-leading experts, providing insight into the current state-of-the-art and the challenges their respective fields face. Two articles address the area of optical fibre sensors, encompassing both conventional and specialty optical fibres. Several other articles are dedicated to laser-based sensors, micro- and nano-engineered sensors, whispering-gallery mode and plasmonic sensors. The use of optical sensors in chemical, biological and biomedical areas is discussed in some other papers. Different approaches required to satisfy applications at visible, infrared and THz spectral regions are also discussed.

Super-long-range distributed vibration sensor based on the polarimetric forward-transmission of light.

Undersea earthquake-triggered giant tsunamis pose significant threats to coastal areas, spanning thousands of kilometers and affecting populations, ecosystems, and infrastructure. To mitigate their impact, monitoring seismic activity in underwater environments is crucial. In this study, we propose a new, to the best of our knowledge, approach for monitoring vibrations in submarine optical cables. By detecting vibration-induced polarization rotation, our dual-wavelength fiber-optic sensing system enables precise measurement of acoustic/vibration amplitude, frequency, and position. As a proof of concept, a double-ended forward-transmission distributed fiber-optic vibration sensor was demonstrated with a single vibration source with a sensitivity of 3.4 mrad/µÎµ at 100 Hz (20 m fiber on PZT), limit of detection of 1.7 pε/Hz1/2 at 100 Hz, sensing range of 121.5 km without an optical amplifier, spatial resolution of 5 m, and position error as small as 34 m. The vibration frequency range tested is from 0.01 to 100 Hz. The sensing system has several advantages, including elegant setup, noise mitigation, and super-long sensing distance.

Fast, selective, and sensitive detection of 2,4-dichlorophenol by an imprinted polymer functionalized core-offset U-shaped fiber sensor.

Pollution monitoring in waterways and oceans is often performed in a laboratory on samples previously taken from the environment. The integration of molecular imprinting polymer nanoparticles (MIP-NPs) with a novel, to the best of our knowledge, fiber optic interferometer allowed a fast and selective detection of water pollutant 2,4-Dichlorophenol (2,4-DCP). The proposed sensor with an increased surface-to-volume ratio of MIP-NPs provided an enhanced sensitivity of 17.1 nm/µM and a wide operating range of 0.1-100 µM. It showed a highly repeatable performance and potential to measure up to nM concentrations. This integrated technique is suitable for the development of compact, stable, precise, and sensitive biosensors for online monitoring and remote chemical sensing applications.

Variable ratio blue/red upconversion in Yb3+-Tm3+ codoped fluorosilicate glasses.

Simultaneous blue-red emission in a fiber pumped by a single wavelength source is perceived as a great challenge because of the large energy difference of the emitted photons. This Letter reports the dependence of the blue-to-red upconversion (UC) emission ratio in Yb3+-Tm3+ codoped fluorosilicate glasses (FSGs) under the excitation of a 980-nm laser on the host glass silica content. Photoluminescence spectra and SEM-EDS are used to clarify the UC mechanism, indicating that the probability of the cross-relaxation (CR) process 1G4 + 3F2→3H6 + 3F4 is key to the dominance of the blue or red emissions. This research can provide a new platform for variable UC luminescence.

Compact high-resolution FBG strain interrogator based on laser-written 3D scattering structure in flat optical fiber.

We demonstrate a fiber Bragg grating (FBG) strain interrogator based on a scattering medium to generate stable and deterministic speckle patterns, calibrated with applied strain, which are highly dependent on the FBG back-reflection spectral components. The strong wavelength-dependency of speckle patterns was previously used for high resolution wavemeters where scattering effectively folds the optical path, but instability makes practical realization of such devices difficult. Here, a new approach is demonstrated by utilizing femtosecond laser-written scatterers inside flat optical fiber, to enhance mechanical stability. By inscribing 15 planes of pseudo-randomized nanovoids (714 [Formula: see text] 500 voids per plane) as a 3D array in a 1 [Formula: see text] 0.7 [Formula: see text] 0.16 mm volume, the intrinsic stability and compactness of the device was improved. Operating as a wavemeter, it remained stable for at least 60 h with 45 pm resolution over the wavelength range of 1040-1056 nm. As a reflection mode FBG interrogator, after calibrating speckle patterns by applying tensile strain to the FBG, the device is capable of detecting microstrain changes in the range of 0-200 [Formula: see text] with a standard error of 4 [Formula: see text], limited by the translation stage step size. All these characteristics make it an interesting technology for filling the niche of low-cost, high-resolution wavemeters and interrogators which offer the best available trade-off between resolution, compactness, price and stability.

Optical sensors, 2022: introduction to the feature issue.

This feature issue of Optics Express highlights contributions from authors who presented their latest research at the OPTICA Optical Sensors and Sensing Congress, held in Vancouver, British Columbia, Canada from 11-15 July 2022. The feature issue comprises 9 contributed papers, which expand upon their respective conference proceedings. The published papers introduced here cover a range of timely research topics in optics and photonics for chip-based sensing, open-path and remote sensing and fiber devices.

High resolution compact spectrometer system based on scattering and spectral reconstruction.

In this Letter, we present a compact scattering spectrometer system based on fluorosilicate glass ceramics. By the algorithmic spectral calibration and reconstruction, we achieve wavelength detection with a resolution of 0.1 nm. Numerous nanocrystals embedded in the glass host in the glass ceramics result in a significant natural multilayer scattering medium, which can provide a 60% scattering efficiency for incident light while increasing the optical path of incident light transmitting in the medium. The glass ceramics scattering medium with a rather compact physical size is integrated with a low-cost camera to compose an optical spectral system, which has potential application in lab-on-a-chip optical spectroscopy.

Extruded TOPAS hollow-core anti-resonant fiber optimized for THz guidance at 0.9THz.

A hollow-core anti-resonant fiber for the THz regime is proposed and demonstrated. The proposed fiber is the hexagonal core shape which is directly extruded using a conventional 3D printer. Experimental results show that by using cyclic olefin copolymer (COC), the proposed fiber design provides a low attenuation of ∼3 dB∕m at ∼ 0.86 THz and ∼15 dB∕m at ∼ 0.42 THz.

Long Range Raman-Amplified Distributed Acoustic Sensor Based on Spontaneous Brillouin Scattering for Large Strain Sensing.

A Brillouin distributed acoustic sensor (DAS) based on optical time-domain refractometry exhibiting a maximum detectible strain of 8.7 mε and a low signal fading is developed. Strain waves with frequencies of up to 120 Hz are measured with an accuracy of 12 µÎµ at a sampling rate of 1.2 kHz and a spatial resolution of 4 m over a sensing range of 8.5 km. The sensing range is further extended by using a modified inline Raman amplifier configuration. Using 80 ns Raman pump pulses, the signal-to-noise ratio is improved by 3.5 dB, while the accuracy of the measurement is enhanced by a factor of 2.5 to 62 µÎµ at the far-end of a 20 km fiber.

Polarization fading mitigation in distributed acoustic sensors based on a high-speed polarization rotator.

A distributed optical fiber acoustic sensor based on interferometric demodulation technique with no polarization fading is demonstrated. A polarization diversity scheme based on a high-speed polarization rotator is used to eliminate signal fading due to polarization mismatch in the Rayleigh backscattered signal between adjacent points on the sensing fiber. This technique yields a spatially uniform response to the applied strain. The sensor exhibited spatial and strain resolutions of <4 m and <7 nɛ, respectively.

Direct femtosecond laser inscription of Bragg gratings in Ho3+/Pr3+ co-doped AlF3-based glass fibers for a 2.86†µm laser.

In this Letter, we report the fabrication of fiber Bragg gratings (FBGs) in home-made Ho3+/Pr3+ co-doped single-cladding fluoroaluminate (AlF3) glass fibers and its application in watt-level lasing at the mid-infrared (MIR) wavelength of 2.86 µm. The FBGs were inscribed using an 800 nm femtosecond (fs) laser direct-writing technique. The FBG properties were investigated for different pulse energies, inscription speeds, grating orders, and transversal lengths. A second-order FBG with a high reflectivity of 99% was obtained at one end of a 16.5-cm-long gain fiber. Under 1150 nm laser pumping, this fiber yielded a power exceeding 1 W at 2863.9 nm with an overall laser efficiency of 17.7%. The fiber laser showed a FWHM bandwidth of 0.46 nm and long-term spectral stability.

Low bend loss femtosecond laser written waveguides exploiting integrated microcrack.

We introduce the fabrication and use of microcracks embedded in glass as an optical element for manipulating light propagation, in particular for enhancing waveguide performance in silica integrated optics. By using a femtosecond laser to induce a strong asymmetric stress pattern in silica, uniform cracks with set dimensions can be created within the substrate and propagated along a fixed path. The smoothness of the resulting cleave interface and large index contrast can be exploited to enhance waveguide modal confinement. As a demonstration, we tackle the longstanding high bend-loss issue in femtosecond laser written silica waveguides by using this technique to cleave the outer edge of laser written waveguide bends, to suppress radiative bend loss. The microcrack cross section is estimated to be 15 µm in height and 30 nm in width, for the 10 [Formula: see text] 10 µm waveguides. At 1550 nm wavelength, losses down to 1 dB/cm at 10 mm bend radius were achieved, without introducing additional scattering. Both the cleave stress pattern and waveguide are fabricated with the same multiscan writing procedure, without requiring additional steps, and re-characterisation of the waveguides after 1 year confirm excellent long term performance stability.

Numerical Modelling of a Distributed Acoustic Sensor Based on Ultra-Low Loss-Enhanced Backscattering Fibers.

In this study, a distributed acoustic sensor (DAS) was numerically modeled based on the non-ideal optical components with their noises and imperfections. This model is used to compare the response of DAS systems to standard single-mode fibers and ultra-low loss-enhanced backscattering (ULEB) fibers, a fiber with an array of high reflective points equally spaced along its length. It is shown that using ULEB fibers with highly reflective points improves the signal-to-noise ratio and linearity of the measurement, compared with the measurement based on standard single-mode fibers.

Room-temperature watt-level and tunable ∼3 µm lasers in Ho3+/Pr3+ co-doped AlF3-based glass fiber.

A room-temperature watt-level continuous-wave-output power mid-infrared fiber laser operating at $\lambda\sim 3\; \unicode{x00B5}{\rm m}$ is demonstrated using a ${{\rm Ho}^{3 +}}/{{\rm Pr}^{3 +}}$ co-doped ${{\rm AlF} _3}$ based glass fiber as a gain fiber. This fixed-wavelength laser had maximum output power of 1.13 W with a slope efficiency of 10.3% and a long-term operating stability of ${\gt}{40}\;{\min }$ without any additional packaging or active thermal management. A fiber laser with tunability from 2.842 to 2.938 µm showed a maximum output power of 110 mW.

High-sensitivity, fast-response ethanol gas optical sensor based on a dual microfiber coupler structure with the Vernier effect.

A high-sensitivity ethanol gas sensor based on two microfiber couplers and the Vernier effect is examined in this Letter using the unique variation rate conversion point characteristics. The output spectrum of the two couplers connected in parallel are superimposed to form a symmetrical envelope curve, showing high responsivity to variations in the external environment. Ethanol sensitivity was achieved by coating the waist region of the coupler with a mixture of Nile red and polymethyl methacrylate. When the concentration of ethanol gas changes, the envelope spectrum shifts. Experimental results show that a high responsivity of 160 pm/ppm can be obtained by tracing the reference peaks in the envelope curve and that the response and recovery times are on the order of seconds.

Enhanced 3.9 µm emission from diode pumped Ho3+/Eu3+ codoped fluoroindate glasses.

The use of Eu3+ codoping for enhancing the Ho3+:5I5→5I6 emission in fluoroindate glasses shows that Eu3+ could depopulate the lower laser state Ho3+:5I6 while having little effect on the upper state Ho3+:5I5, resulting in greater population inversion. The Ho3+/Eu3+ codoped glass has high spontaneous transition probability (6.31s-1) together with large emission cross section (7.68×10-21cm2). This study indicates that codoping of Ho3+ with Eu3+ is a feasible alternative to quench the lower energy level of the 3.9 µm emission and the Ho3+/Eu3+ codoped fluoroindate glass is a promising material for efficient 3.9 µm fiber lasers.

152 km-range single-ended distributed acoustic sensor based on inline optical amplification and a micromachined enhanced-backscattering fiber.

In this Letter, a distributed acoustic sensor (DAS) with a sensing range in excess of 150 km is reported. This extended sensing range is achieved by adding a low-loss enhanced-backscattering fiber at the far end of a standard single-mode fiber. A conventional DAS system along with inline optical amplifiers are used to interrogate the sensing fiber. The combined system exhibits a minimum detectable strain of 40 nε at 1 Hz over a spatial resolution of 5 m.

High-Performance Ultrafast Humidity Sensor Based on Microknot Resonator-Assisted Mach-Zehnder for Monitoring Human Breath.

Monitoring the dynamic humidity requires sensors with fast response and anti-electromagnetic interference, especially for human respiration. Here, an ultrafast fiber-optic breath sensor based on the humidity-sensitive characteristics of gelatin film is proposed and experimentally demonstrated. The sensor consists of a microknot resonator superimposed on a Mach-Zehnder (MZ) interferometer produced by a tapered single-mode fiber, which has an ultrafast response (84 ms) and recovery time (29 ms) and a large dynamic transmission range. The humidity in dynamic ambient causes changes in the refractive index of gelatin coating, which could trigger spectral intensity transients that can be explicitly distinguished between the two states. The sensing principle is analyzed using the traditional transfer-matrix analysis method. The influence of coating thickness on the sensor's trigger threshold is further investigated. Experiments on monitoring breath patterns indicate that the proposed breath sensor has high repeatability, reliability, and validity, which enable many other potential applications such as food processing, health monitoring, and other biomedical applications.

Broadband 2.7 µm mid-infrared emissions in Er3+-doped PbO-PbF2-Bi2O3-Ga2O3 glasses.

Broadband emission at 2.7 µm is observed in an Er3+-doped PbO-PbF2-Bi2O3-Ga2O3 glass. The measured emission band full-width-at-half-maximum (FWHM) is ∼184.4nm, approximately 36 nm wider than that of fluoride glasses. The 2.7 µm emission intensity is almost twice as strong as that of fluoride glasses. The peak values of emission and absorption cross-sections are calculated to be 1.54×10-20cm2 and 1.19×10-20cm2, respectively. This oxyfluoride heavy metal glass shows potential as broadband mid-infrared emission gain material.