Feasibility of a Supporting-Salt-Free Nonaqueous Redox Flow Battery Utilizing Ionic Active Materials.

Nonaqueous redox flow batteries (NAqRFBs) are promising devices for grid-scale energy storage, but high projected prices could limit commercial prospects. One route to reduced prices is to minimize or eliminate the expensive supporting salts typically employed in NAqRFBs. Herein, the feasibility of a flow cell operating in the absence of supporting salt by utilizing ionic active species is demonstrated. These ionic species have high conductivities in acetonitrile (12-19 mS cm-1 ) and cycle at 20 mA cm-2 with energy efficiencies (>75 %) comparable to those of state-of-the-art NAqRFBs employing high concentrations of supporting salt. A chemistry-agnostic techno-economic analysis highlights the possible cost savings of minimizing salt content in a NAqRFB. This work offers the first demonstration of a NAqRFB operating without supporting salt. The associated design principles can guide the development of future active species and could make NAqRFBs competitive with their aqueous counterparts.

Visible light water oxidation using a co-catalyst loaded anatase-structured Ti(1-(5x/4))Nb(x)O(2-y-δ)N(y) compound.

The photocatalytic activity of anatase-structured Ti(1-(5x/4))Nb(x)O(2-y-δ)N(y) (x = 0.25, y = 0.02; NbN-25) was examined for water oxidation under UV and visible light irradiation. The semiconductor was prepared by sol-gel processing followed by nitridation in flowing ammonia and exhibits an indirect optical gap of 2.2 eV. Ti(1-(5x/4))Nb(x)O(2-y-δ)N(y) was loaded with RuO2 by an impregnation technique, and optimized conditions reveal that 1 wt % RuO2 generates 16 µmol O2 from water with concomitant IO3(-) reduction after 3 h of illumination under simulated solar radiation at a flux of 600 mW/cm(2) illumination, which corresponds to 6-sun AM1.5G illumination (compared to no detectible O2 without the RuO2 cocatalyst). A series of cut-on filters shows that the catalyst-loaded semiconductor evolves O2 for λ ≤ 515 nm, and a gas-phase mass spectrometry isotope labeling experiment shows that irradiating an iodate solution in H2(18)O in the presence of 1 wt % RuO2 loaded on NbN-25 gives rise to catalytic water oxidation: both (36)O2 and (34)O2 are observed. It is unclear whether (16)O arises from IO3(-) or surface reconstruction on the photocatalyst, but ICP-AES analysis of the postirradiated solution shows no dissolved metal ions.

Syntheses and structures of three complexes of formulas [L3Co(µ2-O2P(Bn)2)3CoL'][L"], featuring octahedral and tetrahedral cobalt(II) geometries; variable-temperature magnetic susceptibility measurement and analysis on [(py)3Co(µ2-O2PBn2)3Co(py)][ClO4].

The syntheses and structural properties of three dinuclear complexes [L(3)Co(µ(2)-O(2)P(Bn)(2))(3)CoL'][L"] [one ionic L(3) = py(3), L' = py, L" = ClO(4)(-) (1) and two molecular L(3) = py(3), L' = Cl (2) and L(3) = py, µ(2)-NO(3)(-), L' = py (3)] are reported. Complexes feature octahedral Co(II) sites bridged by three dibenzylphosphinate ligands to a tetrahedrally ligated Co(II) site, with the remaining coordination sites occupied by py, nitrato, and Cl ligands. The Co-Co distances are 4.248 Å at 291 K and 4.265 Å at 100 K for 1 and 4.278 and 4.0313(7) Å for 2 and 3, respectively at 100 K. A fit of the low-temperature magnetic susceptibility data was derived for complex 1 with g = 2.25, TIP = 700 × 10(-6) cm(3) mol (-1), λ = -173 cm(-1), κ = 0.93, ν = -3.9, Δ = 630 cm(-1), J = 0.15 cm(-1), and θ = -1.8 resulting in R(χ(M)) = 2.5 × 10(-5) and R(χ(M)T) = 5.8 × 10(-5).