Improved signal stability from a laser vaporization source with a liquid metal target.

The translating and rotating rod or disk of a conventional laser vaporization cluster source is replaced by a liquid metal target. The self-regenerating liquid surface prevents cavities from being bored into the sample by laser ablation. The laser beam strikes a near pristine surface with each pulse, resulting in signals with much better short and long term stabilities. While this approach cannot be used for refractory metals such as tungsten and molybdenum, it is ideal for studies of bimetallic clusters, which can easily be prepared by laser vaporization of a liquid metal alloy.

Melting, premelting, and structural transitions in size-selected aluminum clusters with around 55 atoms.

Heat capacities have been determined for unsupported aluminum clusters, Al49(+) - Al63(+), from 150 to 1050 K. Peaks in the heat capacities due to melting occur between 450 and 650 K (well below the bulk melting point of 933 K). The peaks for Al+51 and Al+52 are bimodal, suggesting the presence of a premelting transition where the surface of the clusters melts around 100 K before the core. For clusters with n > 55 the melting temperatures suddenly drop, and there is a dip in the heat capacities due to a transition between two solid forms before the clusters melt.

Stable copper-tin cluster compositions from high-temperature annealing.

Copper-doped tin clusters can be thermally annealed to much more stable compositions with a substantially higher copper/tin ratio. The annealed clusters are only prominent over a narrow range of compositions: CuSn(10-15)+, Cu2Sn(12-18)+, Cu3Sn(15-21)+, Cu4Sn(18-(24)+, and Cu5Sn(21-(27)+. These compositions are close to those found for W(m)Si(n)+ clusters, raising the possibility that the Cu(m)Sn(n)+ clusters have core-shell geometries like those proposed for the W(m)Si(n)+ clusters. Increasing the number of copper atoms causes a change in the dissociation pattern from the fission processes that are characteristic of semiconductor clusters to the expulsion of individual atoms, which usually occurs for metal clusters. The change in the fragmentation pattern may result because the clusters rich in copper melt before they dissociate, while the pure tin clusters dissociate directly from a solidlike phase.

Second-order phase transitions in amorphous gallium clusters.

Ion mobility and calorimetry measurements have been used to probe the nature of the phase transitions in gallium clusters with 29-55 atoms. While most clusters appear to undergo a first-order transition between solidlike and liquidlike phases, a few show the signature of melting without a significant latent heat. These transitions appear to be the finite size analogue of a second-order phase transition, and they presumably occur for some cluster sizes because their solidlike phase is amorphous.

Melting, freezing, sublimation, and phase coexistence in sodium chloride nanocrystals.

Calorimetry measurements, performed by multicollision induced dissociation, have been used to probe the melting of a number of (NaCl)nNa+ clusters with n=22-37. The clusters anneal at 225-325 K and melt at 750-850 K. (NaCl)22Na+ and (NaCl)37Na+, which can adopt geometries that are perfect fragments of the bulk lattice melt at around 850 K. The other clusters, which (except for n=31) must have defects, melt at temperatures which are up to 100 K lower than the perfect nanocrystals. The internal energy distributions become bimodal near the melting temperature. This is the signature of slow dynamic phase coexistence where clusters spontaneously jump back and forth between the solid and liquid states with an average period that is longer than required for thermal equilibration. The jump frequency must be between 10(4) and 10(7) s(-1) for the bimodal distribution to be observable in our experiments. The (NaCl)nNa+ clusters can dissociate by an unusual thermally activated process where melting and freezing raise the internal energy to generate hot solid clusters that can sublime before they cool to the ambient temperature.

Gallium cluster "magic melters".

Calorimetry measurements (using a method based on multicollision induced dissociation) have been performed for unsupported gallium clusters, Gan+ (n = 30-50 and 55). Melting transitions have been identified from spikes in the heat capacities recorded as a function of temperature. There are enormous fluctuations in the melting temperatures and the heats of fusion with cluster size. Clusters with n = 31, 33, 37, and 45-47 are "magic melters" with particularly well-defined melting transitions. There is a strong correlation between the heats of fusion, entropies of fusion, and the stabilities of the clusters. However, these quantities are not strongly correlated with the melting temperatures.

Pi-helix preference in unsolvated peptides.

Ion mobility measurements have been used to examine helix formations in the gas phase for a series of alanine/glycine-based peptides that incorporate a glutamic acid (E) and lysine (K) at various positions along the backbone. Incorporation of an EK pair lowers the percent helix for all positions (presumably because hydrogen bonding between the backbone and the E and K side chains stabilize the nonhelical globular conformations). The largest percent helix is found when the EK pair is in an i,i+5 arrangement, which suggests that the preferred helical conformation for these peptides is a pi-helix. This conclusion is supported by comparison of cross sections deduced from the ion-mobility measurements to average cross sections calculated for conformations obtained from molecular dynamics simulations. The glutamic acid and lysine may form an ion pair that is stabilized by interactions with the helix macro-dipole.

Water molecule adsorption on protonated dipeptides.

Equilibrium constants for the adsorption of the first water molecule on six protonated dipeptides (Gly-Gly+H(+), Gly-Ala+H(+), Ala-Gly+H(+), Ala-Ala+H(+), Pro-Gly+H(+), and Gly-Trp+H(+)) have been measured as a function of temperature, and DeltaH(o) and DeltaS(o) determined. Density functional theory calculations were performed for both the unsolvated peptides and the peptide water complexes at the B3LYP/6-311++G level. MP2/6-311++G** calculations were also carried out for Gly/Ala peptides. The calculations suggest that adsorption of a water molecule by these simple dipeptides is a complex process, both the unsolvated peptide and the peptide-water complexes have multiple conformations with similar free energies. Average DeltaH(o) and DeltaS(o) values derived from the calculations are in reasonable agreement with the experimental results. According to the calculations, the dominant water adsorption process involves a significant conformational change to accommodate a bridging water molecule. DeltaH(o) is diminished for Pro-Gly+H(+) mainly because the water interacts with a secondary amine, whereas for Gly-Trp+H(+), DeltaH(o) is significantly decreased by the loss of cation-pi interactions upon water adsorption. For unsolvated peptides the proton affinities of the N-terminus and the backbone carbonyl groups are known to be similar. Addition of a single water molecule causes a significant stabilization of the N-terminus protonation site.

Hot and solid gallium clusters: too small to melt.

A novel multicollision induced dissociation scheme is employed to determine the energy content for mass-selected gallium cluster ions as a function of their temperature. Measurements were performed for Ga(+)(n) (n=17 39, and 40) over a 90-720 K temperature range. For Ga+39 and Ga+40 a broad maximum in the heat capacity-a signature of a melting transition for a small cluster-occurs at around 550 K. Thus small gallium clusters melt at substantially above the 302.9 K melting point of bulk gallium, in conflict with expectations that they will remain liquid to below 150 K. No melting transition is observed for Ga+17.

Probing helix formation in unsolvated peptides.

Ion mobility measurements have been used to examine helix formation in unsolvated glycine-based peptides containing three alanine residues. Nine sequence isomers of Ac-[12G3A]K+H(+) were studied (Ac = acetyl, G = glycine, A = alanine, and K = lysine). The amount of helix present for each peptide was examined using two metrics, and it is strongly dependent on the proximity and the location of the alanine residues. Peptides with three adjacent alanines have the highest helix abundances, and those with well-separated alanines have the lowest. The helix abundances for most of the peptides can be fit reasonably well using a modified Lifson-Roig theory. However, Lifson-Roig theory fails to account for several key features of the experimental results. The most likely explanation for the correlation between helix abundances and the number of adjacent alanines is that neighboring alanines promote helix nucleation.