A particulate isotopic standard of uranium and plutonium in an aluminosilicate matrix.

Mixed-actinide microstandard particles have been produced for calibration and performance testing of isotope-ratio mass spectrometers and ion and electron microprobe instruments. The spherical micrometer-size particles consist of an aluminosilicate matrix loaded with 2.2% by weight of isotopically certified uranium and 0.11% by weight of isotopically certified plutonium. The uranium and plutonium isotopic compositions have been verified by both thermal ionization mass spectrometry and secondary ionization mass spectrometry (SIMS). The elemental composition of the microspheres has been determined by both electron microprobe and SIMS analysis.

Particle transport through a hollow canine airway cast by high-frequency oscillatory ventilation.

High-frequency oscillatory ventilation (HFV) of the mammalian respiratory tract can maintain good respiratory ventilation, even with tidal volumes less than half of the anatomic dead space. A steady bidirectional drift is established in airways when the frequency is greater than 2 Hz, resulting in quasi-steady axial streams in the airways. Convective transport from the trachea to peripheral airways takes place in the central core of the bifurcating network of the bronchial tree. It takes place in the opposite direction in the annular regions near the airway walls. In this study, aerosol particle transport was measured in a hollow cast of a canine tracheobronchial tree that extended from the trachea to terminal bronchioles. The 0.5 micron particles, placed in the upper trachea as a bolus, were transported rapidly to the terminal airways of the cast by HFV with tidal volumes of less than one third the volume of the cast. Carrier gases of different kinematic viscosity were used to investigate the fluid dynamics of the transport. Particle transport during HFV was fastest in a gas of high kinematic viscosity (helium), and slowest in a gas of low kinematic viscosity (sulfur hexafluoride). The results are consistent with the application of lubrication theory, improve our understanding of convective processes involved in HFV, and provide new insights into particle penetration in the airways and other aspects of respiratory ventilation.

Numerical simulation of aerosol particle transport by oscillating flow in respiratory airways.

Particle transport by oscillating flow in a tapered channel or in a tapered tube was computed from the complete equations of motion. These geometries represent a simplified model of the divergent flow field of the mammalian bronchial tree. The computed deformation profile of a line of particles, transported by the oscillatory motion, was compared with prior experimental results and analytical calculations. All three methods agree that there is transport in the divergent direction of the tube by an axial stream of steady drift in the core for moderately high frequency of oscillation (Womersley parameter in the range of 1 to 10). Bidirectional flow is established by an annular stream in the convergent direction, with no net flow on integral cycles of the oscillating fluid. At higher frequency, however, the steady stream transforms to a different shape in the tapered tube, with transport in the divergent direction nearer the walls of the tube, rather than in the core. Transport by the continuing streams with oscillatory ventilation of the respiratory tract should deliver medicinal aerosols of low intrinsic particle mobility to the peripheral regions of the lungs.

Flow distribution through human and canine airways during inhalation and exhalation.

Airflow distribution through the tracheobronchial tree is influenced by many factors. In a hollow cast of the central airways, the only factors involved are resistance and inertia of the airflow. Distribution of steady flow during both inhalation and exhalation was measured at different total flow rates in human and canine tracheobronchial casts. The resulting airflow rates in peripheral segments were measured with a sensitive apparatus, which did not disturb the distribution of flow. Inertia of the airflow was found to be small but significant in airways of the human cast and substantially greater in the canine airway cast than in the human cast during inhalation. The influence of airflow inertia during inhalation was largely responsible for the different distributions of flow during inhalation and exhalation through the airway casts. Airflow resistance was found to be considerably greater during exhalation and may have contributed to the redistribution of flow. The forces involved are small but should be considered when modeling the in vivo distribution of airflow.

Flow distribution in human and canine tracheobronchial airway casts.

Measurements of flow rates through hollow casts of human and canine tracheobronchial airways, which extend from just below the larynx to airways 1 mm in diameter, show basic similarities in the distribution of air flow and also species differences which must be considered. The distribution of air flow, for both constant and pulsatile inspiratory flow, was measured for minute volumes equivalent to 6, 11, 17 and 22 L min-1 for the human and 3, 6, 8, and 11 L min-1 for the dog. Inertia of air flow (inertance) was found to carry more of the flow to airways of the lower lobes at higher flow rates. Basic differences in airway branching pattern result in a more distinct change in airflow distribution as flow rate changes for the canine cast as compared with the human cast. These differences should contribute to differing patterns of mass transfer of inhaled particles and gases in central airways of the two species.

Inhalation deposition and retention patterns of a U-Pu chain aggregate aerosol.

Chain aggregate aerosol particles are normally formed during many high-temperature combustion and vaporization processes. The shape of chain aggregate aerosol particles could have an effect on the pattern of inhalation deposition and retention of the particles in the respiratory tract. A chain aggregate aerosol of nuclear reactor fuel could be present as an inhalation hazard if it were released to the atmosphere after a meltdown, core-disruptive accident. Rats were exposed to a chain aggregate U-Pu aerosol made by laser vaporization of mixed-oxide, breeder reactor fuel (20% plutonium dioxide and 80% uranium dioxide), then sacrificed to measure the clearance and retention of the fuel aerosol particles. Deposition of the 0.7-micron (activity median aerodynamic equivalent diameter) aerosol particles resulted in an average initial lung burden of 4140 Bq alpha activity. The chain aggregate particle shape was not a major factor in the total deposition; however, it may have influenced the regional distribution of the activity deposited. Retention of the particles in the upper airways of the tracheobronchial tree was on the order of 1% of the concurrent lung burden, which is consistent with recent data of other investigations. This study indicates that insoluble chain aggregate particles are retained in the tracheobronchial airways to a degree similar to simple spherically shaped particles of equivalent volume diameter.

Generation of Li combustion aerosols for animal inhalation studies.

A system was developed for generating Li aerosols to determine the potential health hazards of postulated accidents associated with the use of Li as a fusion reactor blanket or coolant. The aerosol was generated by sweeping Ar through a stainless steel chamber filled with Li metal that was heated inductively to temperatures up to 1300 degrees C. Argon carried the Li vapor into a burning chamber where it was mixed with air. The reaction of Li vapor with air formed an intense white flame that produced typical branched-chain condensation aerosol particles. This system generated well-controlled concentrations up to 2500 mg/m3 for periods of 4 h. The mass median aeordynamic diameter of the aerosol was approximately 0.66 micron with a geometric standard deviation of 1.5. Aerosols could be generated that were greater than 96% Li2O and LiOH, LiOH.H2O, or Li2CO3 by controlling the CO2 and H2O concentrations in the supply air. The system is currently being used to investigate the acute toxicity of Li combustion aerosols in laboratory animals.

Pathologic effects in rodents exposed to sodium combustion products.

Three species of rodents exhibited respiratory distress when exposed to aerosols of sodium combustion products, the major constituent of which was shown to be sodium carbonate. At the higher doses, animals died during or shortly after 2 hr exposures. Lesions, primarily involving the pharynx and larynx, included accumulation of mucus, vesiculation, and mucosal edema. Other lesions included edema and vesiculation of the anterior trachea, hemorrhage in the lungs, and severe gastric tympany. Basal epithelial cells of the posterior pharynx and anterior trachea had enlarged mitochondria following exposures of 1 hr or more.

Mount st. Helens ash from the 18 may 1980 eruption: chemical, physical, mineralogical, and biological properties.

Samples of ash from the 18 May 1980 eruption of Mount St. Helens were collected from several locations in eastern Washington and Montana. The ash was subjected to a variety of analyses to determine its chemical, physical, mineralogical, and biological characteristics. Chemically, the ash samples were of dacitic composition. Particle size data showed bimodal distributions and differed considerably with location. However, all samples contained comparable amounts of particles less than 3.5 micrometers in diameter (respirable fraction). Mineralogically, the samples ranged from almost totally glassy to almost totally crystalline. Crystalline samples were dominated by plagioclase feldspar (andesine) and orthopyroxene (hypersthene), with smaller amounts of titanomagnetite and hornblende. All but one of the samples contained from less than 1 percent to 3 percent free crystalline silica (quartz, trydimite, or cristobalite) in both the bulk samples and 1 to 2 percent in the fractions smaller than 3.5 micrometers. The long-lived natural radionuclide content of the ash was comparable to that of crustal material; however, relatively large concentrations of short-lived radon daughters were present and polonium-210 content was inversely correlated with particle size. In vitro biological tests showed the ash to be nontoxic to alveolar macrophages, which are an important part of the lungs' natural clearance mechanism. On the basis of a substantial body of data that has shown a correlation between macrophage cytotoxicity and fibrogenicity of minerals, the ash is not predicted to be highly fibrogenic.

Comparison of the aerodynamic size distribution of chain-like aggregates measured with a cascade impactor and a spiral centrifuge.

Several authors have suggested that chain-like aggregates fragment in the jets of cascade impactors and that the impactor consequently underestimates the median aerodynamic diameter and overestimates the geometric standard deviation (GSD). The aerodynamic size distribution of (Pu0.14U0.86)02.2 aggregates were measured simultaneously with two Mercer cascade impactors and a LAPS spiral centrifuge to investigate this problem. Although the median aerodynamic diameters were generally in good agreement, the impactor consistently measured higher values for the GSD than did the spiral centrifuge. Based on experiments in which losses in the centrifuge inlet were measured, it was concluded that the centrifuge had measured the aerodynamic size distribution more accurately than the impactor. Interception of chain-like aggregates on the first few impactor stages may have been the primary reason for the disparity between the impactor and centrifuge measurements.