Surface Modification of Brass via Ultrashort Pulsed Direct Laser Interference Patterning and Its Effect on Bacteria-Substrate Interaction.

In recent decades, antibiotic resistance has become a crucial challenge for human health. One potential solution to this problem is the use of antibacterial surfaces, i.e., copper and copper alloys. This study investigates the antibacterial properties of brass that underwent topographic surface functionalization via ultrashort pulsed direct laser interference patterning. Periodic line-like patterns in the scale range of single bacterial cells were created on brass with a 37% zinc content to enhance the contact area for rod-shaped Escherichia coli (E. coli). Although the topography facilitates attachment of bacteria to the surface, reduced killing rates for E. coli are observed. In parallel, a high-resolution methodical approach was employed to explore the impact of laser-induced topographical and chemical modifications on the antibacterial properties. The findings reveal the underlying role of the chemical modification concerning the antimicrobial efficiency of the Cu-based alloy within the superficial layers of a few hundred nanometers. Overall, this study provides valuable insight into the effect of alloy composition on targeted laser processing for antimicrobial Cu-surfaces, which facilitates the thorough development and optimization of the process concerning antimicrobial applications.

Recycling of All-Solid-State Li-ion Batteries: A Case Study of the Separation of Individual Components Within a System Composed of LTO, LLZTO and NMC.

With the current global projection of over 130 million electric vehicles (EVs), there soon will be a need for battery waste management. Especially for all-solid-state lithium-ion batteries (lithium ASSBs), aspects of waste management and circular economy have not been addressed so far. Within such ASSBs, the use of solid-electrolytes like garnet-type Li6.5 La3 Zr1.5 Ta0.5 O12 (LLZTO) may shift focus on strategies to recover not only the transition metal elements but also elements like La/Zr/Ta. In this work, we present a two-step recycling approach using citric acid as the leaching agent to separate and recover the individual components of a model cell comprising of Li4 Ti5 O12 (LTO) anode, Li6.5 La3 Zr1.5 Ta0.5 O12 (LLZTO) garnet electrolyte and LiNi1/3 Mn1/3 Co1/3 O2 (NMC) cathode. We observe that by adjusting the concentration of citric acid, it was possible to separate the materials from each other without strong mixing of individual phases and also to maintain their principle performance characteristics. Thus, the process developed has a potential for upscaling and can guide towards considering separation capability of battery components in the development of lithium ASSBs.

Theoretical and 27Al NMR Spectroscopic Investigations of Binary Intermetallic Alkaline-Earth Aluminides.

The binary alkaline-earth aluminides AEAl2 (AE = Ca and Sr) and AEAl4 (AE = Ca-Ba) have been synthesized from the elements and investigated via powder X-ray diffraction experiments. CaAl2 adopts the cubic MgCu2-type structure (Fd3̅m), while SrAl2 crystallizes in the orthorhombic KHg2-type (Imma). LT-CaAl4 crystallizes with the monoclinic CaGa4-type (C2/m), while HT-CaAl4, SrAl4, and BaAl4 adopt the tetragonal BaAl4-type structure (I4/mmm). The close structural relation of the two CaAl4 polymorphs was established using a group-subgroup relation in the Bärnighausen formalism. In addition to the room-temperature and normal pressure phase of SrAl2, a high-pressure/high-temperature phase has been prepared using multianvil techniques, and its structural and spectroscopic parameters were determined. Elemental analysis by inductively coupled plasma mass spectrometry showed that no significant impurities with other elements besides the weighed ones are present and the chemical compositions match the synthesized ones. The title compounds have been furthermore investigated by 27Al solid-state magic angle spinning NMR experiments to validate the crystal structure and to gain information about the influence of the composition on the electron transfer and the NMR characteristics. This has also been investigated from a quantum chemical point of view using Bader charges, while the stabilities of the binary compounds in the three phase diagrams (Ca-Al, Sr-Al and Ba-Al) have been studied by calculations of formation energies per atom.

Building the bridge between U(VI) and Ca-bentonite - Influence of concentration, ionic strength, pH, clay composition and competing ions.

In the context of a high-level nuclear waste disposal, the retention of U(VI) on non-pre-treated Ca-bentonite as potential technical barrier is studied. The objective of this study is to reveal the retention behaviour of U(VI) under extreme geochemical conditions, such as hyperalkaline pH range as well as high salinity at the same time, and taking into account other relevant parameters. This should lead to a better understanding of necessary safety precautions for avoiding a release of U(VI) in the environment. Batch experiments were conducted to determine the influence of the initial U(VI) concentration, salinity, pH value, clay composition and the presence of other elements (Ca(II), I-, Cs(I), Eu(III)). After the sorption experiments, the remaining U(VI) concentration in solution was determined via mass spectrometry with inductively coupled plasma. U(VI) can be immobilised from 10% to 100% under all investigated conditions. Precipitation plays a role in the U(VI) retention but only at higher concentrations (≥10-5 mol L-1). The retention is reversible especially with decreasing pH (<10.5) as the aquo complex Ca2UO2(CO3)3(aq) is formed. Ca(II) strongly enhances the U(VI) adsorption onto Ca-bentonite in the hyperalkaline pH range, probably due to the formation of Ca(II)-bridges. The best retention could be observed on natural bentonite compared to pure montmorillonite and altered bentonite. From a waste cocktail containing important elements of the repository inventory (Cs(I), Eu(III), U(VI) and iodide), only Eu(III) as homologous element to trivalent actinoids competes with U(VI) for binding sites, especially at low metal concentrations, but also facilitates the precipitation at higher concentrations.

siRNA delivery to macrophages using aspherical, nanostructured microparticles as delivery system for pulmonary administration.

The delivery of oligonucleotides such as siRNA to the lung is a major challenge, as this group of drugs has difficulties to overcome biological barriers due to its polyanionic character and the associated hydrophilic properties, resulting in inefficient delivery. Especially in diseases such as asthma, chronic obstructive pulmonary disease and cystic fibrosis, where increased proinflammation is present, a targeted RNA therapy is desirable due to the high potency of these oligonucleotides. To address these problems and to ensure efficient uptake of siRNA in macrophages, a microparticulate, cylindrical delivery system was developed. In the first step, this particle system was tested for its aerodynamic characteristics to evaluate the aerodynamic properties to optimize lung deposition. The mass median aerodynamic diameter of 2.52 ± 0.23 µm, indicates that the desired target should be reached. The inhibition of TNF-α release, as one of the main mediators of proinflammatory reactions, was investigated. We could show that our carrier system can be loaded with siRNA against TNF-α. Gel electrophoreses allowed to demonstrate that the load can be incorporated and released without being degraded. The delivery system was found to transport a mass fraction of 0.371% [%w/w] as determined by inductively coupled plasma mass spectroscopy. When investigating the release kinetics, the results showed that several days are necessary to release a major amount of the siRNA indicating a sustained release. The cylindrical microparticles with an aspect ratio of 3.3 (ratio of length divided by width) were then tested in vitro successfully reducing TNF-α release from human macrophages significantly by more than 30%. The developed formulation presents a possible oligonucleotide delivery system allowing due to its internal structure to load and protect siRNA.

Simultaneous quantification of iodine and high valent metals via ICP-MS under acidic conditions in complex matrices.

The determination of iodine as a main fission product (especially the isotopes I-129 and I-131) of stored HLW in a disposal beside its distribution as a natural ingredient of many different products like milk, food and seawater is a matter of particular interest. The simultaneous ICP-MS determination of iodine as iodide together with other elements (especially higher valent metal ions) relevant for HLW is analytically very problematic. A reliable ICP-MS quantification of iodide must be performed at neutral or alkaline conditions in contrast to the analysis of metal ions which are determined in acidic pH ranges. Herein, we present a method to solve this problem by changing the iodine speciation resulting in an ICP-MS determination of iodide as iodate. The oxidation from iodide to iodate with sodium hypochlorite at room temperature is a fast and convenient method with flexible reaction time, from one hour up to three days, thus eliminating the disadvantages of quantifying iodine species via ICP-MS. In the analysed concentration range of iodine (0.1-100µgL-1) we obtain likely quantitative recovery rates for iodine between 91% and 102% as well as relatively low RSD values (0.3-4.0%). As an additional result, it is possible to measure different other element species in parallel together with the generated iodate, even high valent metals (europium and uranium beside caesium) at recovery rates in the same order of magnitude (93-104%). In addition, the oxidation process operates above pH 7 thus offering a wide pH range for sample preparation. Even analytes in complex matrices, like 5M saline (NaCl) solution or artificial cement pore water (ACW) can be quantified with this robust sample preparation method.