Dehydropolymerization of Amine-Boranes using Bis(imino)pyridine Rhodium Pre-Catalysis: σ-Amine-Borane Complexes, Nanoparticles, and Low Residual-Metal BN-Polymers that can be Chemically Repurposed.

The sigma amine-borane complexes [Rh(L1)(η2 :η2 -H3 B⋅NRH2 )][OTf] (L1=2,6-bis-[1-(2,6-diisopropylphenylimino)ethyl]pyridine, R=Me, Et, n Pr) are described, alongside [Rh(L1)(NMeH2 )][OTf]. Using R=Me as a pre-catalyst (1 mol %) the dehydropolymerization of H3 B ⋅ NMeH2 gives [H2 BNMeH]n selectively. Added NMeH2 , or the direct use of [Rh(L1)(NMeH2 )][OTf], is required for initiation of catalysis, which is suggested to operate through the formation of a neutral hydride complex, Rh(L1)H. The formation of small (1-5 nm) nanoparticles is observed at the end of catalysis, but studies are ambiguous as to whether the catalysis is solely nanoparticle promoted or if there is a molecular homogeneous component. [Rh(L1)(NMeH2 )][OTf] is shown to operate at 0.025 mol % loadings on a 2 g scale of H3 B ⋅ NMeH2 to give polyaminoborane [H2 BNMeH]n [Mn =30,900 g/mol, Ð=1.8] that can be purified to a low residual [Rh] (6 µg/g). Addition of Na[N(SiMe3 )2 ] to [H2 BNMeH]n results in selective depolymerization to form the eee-isomer of N,N,N-trimethylcyclotriborazane [H2 BNMeH]3 : the chemical repurposing of a main-group polymer.

Manganese catalysed dehydrogenative synthesis of polyureas from diformamide and diamines.

We report here the synthesis of polyureas from the dehydrogenative coupling of diamines and diformamides. The reaction is catalysed by a manganese pincer complex and releases H2 gas as the only by-product making the process atom-economic and sustainable. The reported method is greener in comparison to the current state-of-the-art production routes that involve diisocyanate and phosgene feedstock. We also report here the physical, morphological, and mechanical properties of synthesized polyureas. Based on our mechanistic studies, we suggest that the reaction proceeds via isocyanate intermediates formed by the manganese catalysed dehydrogenation of formamides.

Synthesis of Polyethyleneimines from the Manganese-Catalysed Coupling of Ethylene Glycol and Ethylenediamine.

Polyethyleneimines find many applications in products such as detergents, adhesives, cosmetics, and for processes such as tissue culture, gene therapy, and CO2 capture. The current state-of-the-art technology for the production of the branched polyethyleneimines involves aziridine feedstock which is a highly toxic, volatile and mutagenic chemical and raises significant concern to human health and environment. We report here a novel method for the synthesis of branched polyethyleneimine derivative from ethylene glycol and ethylenediamine which are much safer, environmentally benign, commercially available and potentially renewable feedstock. The polymerisation reaction is catalysed by a complex of an earth-abundant metal, manganese and liberates H2 O as the only by-product. Our mechanistic studies using a combination of DFT computation and experiment suggest that the reaction proceeds by the formation and subsequent hydrogenation of imine intermediates.

Single-Crystal to Single-Crystal Addition of H2 to [Ir(iPr-PONOP)(propene)][BArF 4] and Comparison Between Solid-State and Solution Reactivity.

The reactivity of the Ir(I) PONOP pincer complex [Ir(iPr-PONOP)(η2-propene)][BArF 4], 6, [iPr-PONOP = 2,6-(iPr2PO)2C6H3N, ArF = 3,5-(CF3)2C6H3] was studied in solution and the solid state, both experimentally, using molecular density functional theory (DFT) and periodic-DFT computational methods, as well as in situ single-crystal to single-crystal (SC-SC) techniques. Complex 6 is synthesized in solution from sequential addition of H2 and propene, and then the application of vacuum, to [Ir(iPr-PONOP)(η2-COD)][BArF 4], 1, a reaction manifold that proceeds via the Ir(III) dihydrogen/dihydride complex [Ir(iPr-PONOP)(H2)H2][BArF 4], 2, and the Ir(III) dihydride propene complex [Ir(iPr-PONOP)(η2-propene)H2][BArF 4], 7, respectively. In solution (CD2Cl2) 6 undergoes rapid reaction with H2 to form dihydride 7 and then a slow (3 d) onward reaction to give dihydrogen/dihydride 2 and propane. DFT calculations on the molecular cation in solution support this slow, but productive, reaction, with a calculated barrier to rate-limiting propene migratory insertion of 24.8 kcal/mol. In the solid state single-crystals of 6 also form complex 7 on addition of H2 in an SC-SC reaction, but unlike in solution the onward reaction (i.e., insertion) does not occur, as confirmed by labeling studies using D2. The solid-state structure of 7 reveals that, on addition of H2 to 6, the PONOP ligand moves by 90° within a cavity of [BArF 4]- anions rather than the alkene moving. Periodic DFT calculations support the higher barrier to insertion in the solid state (ΔG ‡ = 26.0 kcal/mol), demonstrating that the single-crystal environment gates onward reactivity compared to solution. H2 addition to 6 to form 7 is reversible in both solution and the solid state, but in the latter crystallinity is lost. A rare example of a sigma amine-borane pincer complex, [Ir(iPr-PONOP)H2(η1-H3B·NMe3)][BArF 4], 5, is also reported as part of these studies.

Dehydropolymerization of H3B·NMeH2 Mediated by Cationic Iridium(III) Precatalysts Bearing κ3- i Pr-PN R P Pincer Ligands (R = H, Me): An Unexpected Inner-Sphere Mechanism.

The dehydropolymerization of H3B·NMeH2 to form N-methylpolyaminoborane using neutral and cationic catalysts based on the {Ir( i Pr-PNHP)} fragment [ i Pr-PNHP = κ3-(CH2CH2P i Pr2)2NH] is reported. Neutral Ir( i Pr-PNHP)H3 or Ir( i Pr-PNHP)H2Cl precatalysts show no, or poor and unselective, activity respectively at 298 K in 1,2-F2C6H4 solution. In contrast, addition of [NMeH3][BArF 4] (ArF = 3,5-(CF3)2C6H3) to Ir( i Pr-PNHP)H3 immediately starts catalysis, suggesting that a cationic catalytic manifold operates. Consistent with this, independently synthesized cationic precatalysts are active (tested between 0.5 and 2.0 mol % loading) producing poly(N-methylaminoborane) with M n ∼ 40,000 g/mol, D ∼1.5, i.e., dihydrogen/dihydride, [Ir( i Pr-PNHP)(H)2(H2)][BArF 4]; σ-amine-borane [Ir( i Pr-PNHP)(H)2(H3B·NMe3)][BArF 4]; and [Ir( i Pr-PNHP)(H)2(NMeH2)][BArF 4]. Density functional theory (DFT) calculations probe hydride exchange processes in two of these complexes and also show that the barrier to amine-borane dehydrogenation is lower (22.5 kcal/mol) for the cationic system compared with the neutral system (24.3 kcal/mol). The calculations show that the dehydrogenation proceeds via an inner-sphere process without metal-ligand cooperativity, and this is supported experimentally by N-Me substituted [Ir( i Pr-PNMeP)(H)2(H3B·NMe3)][BArF 4] being an active catalyst. Key to the lower barrier calculated for the cationic system is the outer-sphere coordination of an additional H3B·NMeH2 with the N-H group of the ligand. Experimentally, kinetic studies indicate a complex reaction manifold that shows pronounced deceleratory temporal profiles. As supported by speciation and DFT studies, a key observation is that deprotonation of [Ir( i Pr-NHP)(H)2(H2)][BArF 4], formed upon amine-borane dehydrogenation, by the slow in situ formation of NMeH2 (via B-N bond cleavage), results in the formation of essentially inactive Ir( i Pr-PNHP)H3, with a coproduct of [NMeH3]+/[H2B(NMeH2)2]+. While reprotonation of Ir( i Pr-PNHP)H3 results in a return to the cationic cycle, it is proposed, supported by doping experiments, that reprotonation is attenuated by entrainment of the [NMeH3]+/[H2B(NMeH2)2]+/catalyst in insoluble polyaminoborane. The role of [NMeH3]+/[H2B(NMeH2)]+ as chain control agents is also noted.

Versatile, Cheap, Readily Modifiable Sample Delivery Method for Analysis of Air-/Moisture-Sensitive Samples Using Atmospheric Pressure Solids Analysis Probe Mass Spectrometry.

A cheap, versatile, readily modified, and reusable glass probe system enabling delivery of solid air-/moisture-sensitive samples for mass spectrometric (MS) analysis using an Atmospheric pressure Solids Analysis Probe (ASAP) is described. The simplicity of the design allows quick and easy ASAP MS analyses of sensitive solid and liquid samples without the need for any modifications to commercially available vertically loaded ASAP mass spectrometers. A comparison of ASAP mass spectra obtained for metal complexes under air and an inert atmosphere is given.

Controlled Synthesis of Well-Defined Polyaminoboranes on Scale Using a Robust and Efficient Catalyst.

The air tolerant precatalyst, [Rh(L)(NBD)]Cl ([1]Cl) [L = κ3-(iPr2PCH2CH2)2NH, NBD = norbornadiene], mediates the selective synthesis of N-methylpolyaminoborane, (H2BNMeH)n, by dehydropolymerization of H3B·NMeH2. Kinetic, speciation, and DFT studies show an induction period in which the active catalyst, Rh(L)H3 (3), forms, which sits as an outer-sphere adduct 3·H3BNMeH2 as the resting state. At the end of catalysis, dormant Rh(L)H2Cl (2) is formed. Reaction of 2 with H3B·NMeH2 returns 3, alongside the proposed formation of boronium [H2B(NMeH2)2]Cl. Aided by isotopic labeling, Eyring analysis, and DFT calculations, a mechanism is proposed in which the cooperative "PNHP" ligand templates dehydrogenation, releasing H2B═NMeH (ΔG‡calc = 19.6 kcal mol-1). H2B═NMeH is proposed to undergo rapid, low barrier, head-to-tail chain propagation for which 3 is the catalyst/initiator. A high molecular weight polymer is formed that is relatively insensitive to catalyst loading (Mn ∼71 000 g mol-1; D, of ∼ 1.6). The molecular weight can be controlled using [H2B(NMe2H)2]Cl as a chain transfer agent, Mn = 37 900-78 100 g mol-1. This polymerization is suggested to arise from an ensemble of processes (catalyst speciation, dehydrogenation, propagation, chain transfer) that are geared around the concentration of H3B·NMeH2. TGA and DSC thermal analysis of polymer produced on scale (10 g, 0.01 mol % [1]Cl) show a processing window that allows for melt extrusion of polyaminoborane strands, as well as hot pressing, drop casting, and electrospray deposition. By variation of conditions in the latter, smooth or porous microstructured films or spherical polyaminoboranes beads (∼100 nm) result.

η2-Alkene Complexes of [Rh(PONOP-iPr)(L)]+ Cations (L = COD, NBD, Ethene). Intramolecular Alkene-Assisted Hydrogenation and Dihydrogen Complex [Rh(PONOP-iPr)(η-H2)].

Rhodium-alkene complexes of the pincer ligand κ3-C5H3N-2,6-(OPiPr2)2 (PONOP-iPr) have been prepared and structurally characterized: [Rh(PONOP-iPr)(η2-alkene)][BArF4] [alkene = cyclooctadiene (COD), norbornadiene (NBD), ethene; ArF = 3,5-(CF3)2C6H3]. Only one of these, alkene = COD, undergoes a reaction with H2 (1 bar), to form [Rh(PONOP-iPr)(η2-COE)][BArF4] (COE = cyclooctene), while the others show no significant reactivity. This COE complex does not undergo further hydrogenation. This difference in reactivity between COD and the other alkenes is proposed to be due to intramolecular alkene-assisted reductive elimination in the COD complex, in which the η2-bound diene can engage in bonding with its additional alkene unit. H/D exchange experiments on the ethene complex show that reductive elimination from a reversibly formed alkyl hydride intermediate is likely rate-limiting and with a high barrier. The proposed final product of alkene hydrogenation would be the dihydrogen complex [Rh(PONOP-iPr)(η2-H2)][BArF4], which has been independently synthesized and undergoes exchange with free H2 on the NMR time scale, as well as with D2 to form free HD. When the H2 addition to [Rh(PONOP-iPr)(η2-ethene)][BArF4] is interrogated using pH2 at higher pressure (3 bar), this produces the dihydrogen complex as a transient product, for which enhancements in the 1H NMR signal for the bound H2 ligand, as well as that for free H2, are observed. This is a unique example of the partially negative line-shape effect, with the enhanced signals that are observed for the dihydrogen complex being explained by the exchange processes already noted.