From benchtop to clinic: a translational analysis of the immune response to submicron topography and its relevance to bone healing.

Proper regulation of the innate immune response to bone biomaterials after implantation is pivotal for successful bone healing. Pro-inflammatory M1 and anti-inflammatory M2 macrophages are known to have an important role in regulating the healing response to biomaterials. Materials with defined structural and topographical features have recently been found to favourably modulate the innate immune response, leading to improved healing outcomes. Calcium phosphate bone grafts with submicron-sized needle-shaped surface features have been shown to trigger a pro-healing response through upregulation of M2 polarised macrophages, leading to accelerated and enhanced bone regeneration. The present review describes the recent research on these and other materials, all the way from benchtop to the clinic, including in vitro and in vivo fundamental studies, evaluation in clinically relevant spinal fusion models and clinical validation in a case series of 77 patients with posterolateral and/or interbody fusion in the lumbar and cervical spine. This research demonstrates the feasibility of enhancing biomaterial-directed bone formation by modulating the innate immune response through topographic surface features.

Accelerated bone formation by biphasic calcium phosphate with a novel sub-micron surface topography.

Osteoinductive calcium phosphate (CaP) bone grafts have equivalent performance to autografts in repairing critical-size bone defects. The osteoinductive potential of CaP is linked to the size of the surface topographical features. In the present study, two novel biphasic calcium phosphate (BCP) bone grafts were synthesised with either sub-micron- (BCP<µm) or micron-scale (BCPµm) needle-shaped surface topography and compared to dimensionally similar tricalcium phosphate (TCP) with grain-shaped surface structures (TCP<µm and TCPµm). To clarify the possible function of the surface morphology (needle-like vs. grain-like) in initiating bone formation, the four CaP test materials were physicochemically characterised and implanted for 12 weeks in the dorsal muscle of beagles. The sub-micron needle-shaped topography of BCP<µm triggered earlier bone formation (3-6 weeks) as compared to the grain-shaped surface topography of TCP<µm, which formed bone at 6-9 weeks. After 12 weeks, the amount of induced bone formation in both materials was equivalent, based on histomorphometry. The micron-sized needle-shaped surface topography of BCPµm led to limited formation of new bone tissue, whereas its counterpart, TCPµm with grain-shaped surface topography, failed to trigger de novo bone formation. The relative strength of the parameters affecting CaP-driven bone induction was as follows: surface feature size > surface feature morphology > substrate chemistry. BCP materials with needle-shaped sub-micron surface topography gave rise to accelerated bone formation and slower rate of resorption than a comparable TCP. These characteristics may be translated to improve bone healing in orthotopic defects.

Surface-enrichment with hydroxyapatite nanoparticles in stereolithography-fabricated composite polymer scaffolds promotes bone repair.

Fabrication of composite scaffolds using stereolithography (SLA) for bone tissue engineering has shown great promises. However, in order to trigger effective bone formation and implant integration, exogenous growth factors are commonly combined to scaffold materials. In this study, we fabricated biodegradable composite scaffolds using SLA and endowed them with osteopromotive properties in the absence of biologics. First we prepared photo-crosslinkable poly(trimethylene carbonate) (PTMC) resins containing 20 and 40wt% of hydroxyapatite (HA) nanoparticles and fabricated scaffolds with controlled macro-architecture. Then, we conducted experiments to investigate how the incorporation of HA in photo-crosslinked PTMC matrices improved human bone marrow stem cells osteogenic differentiation in vitro and kinetic of bone healing in vivo. We observed that bone regeneration was significantly improved using composite scaffolds containing as low as 20wt% of HA, along with difference in terms of osteogenesis and degree of implant osseointegration. Further investigations revealed that SLA process was responsible for the formation of a rich microscale layer of HA corralling scaffolds. To summarize, this work is of substantial importance as it shows how the fabrication of hierarchical biomaterials via surface-enrichment of functional HA nanoparticles in composite polymer stereolithographic structures could impact in vitro and in vivo osteogenesis. STATEMENT OF SIGNIFICANCE: This study reports for the first time the enhance osteopromotion of composite biomaterials, with controlled macro-architecture and microscale distribution of hydroxyapatite particles, manufactured by stereolithography. In this process, the hydroxyapatite particles are not only embedded into an erodible polymer matrix, as reported so far in the literature, but concentrated at the surface of the structures. This leads to robust in vivo bone formation at low concentration of hydroxyapatite. The reported 3D self-corralling composite architecture provides significant opportunities to develop functional biomaterials for bone repair and tissue engineering.

Modeling BCR-ABL and MLL-AF9 leukemia in a human bone marrow-like scaffold-based xenograft model.

Although NOD-SCID IL2Rγ-/- (NSG) xenograft mice are currently the most frequently used model to study human leukemia in vivo, the absence of a human niche severely hampers faithful recapitulation of the disease. We used NSG mice in which ceramic scaffolds seeded with human mesenchymal stromal cells were implanted to generate a human bone marrow (huBM-sc)-like niche. We observed that, in contrast to the murine bone marrow (mBM) niche, the expression of BCR-ABL or MLL-AF9 was sufficient to induce both primary acute myeloid leukemia (AML) and acute lymphocytic leukemia (ALL). Stemness was preserved within the human niches as demonstrated by serial transplantation assays. Efficient engraftment of AML MLL-AF9 and blast-crisis chronic myeloid leukemia patient cells was also observed, whereby the immature blast-like phenotype was maintained in the huBM-sc niche but to a much lesser extent in mBM niches. We compared transcriptomes of leukemias derived from mBM niches versus leukemias from huBM-like scaffold-based niches, which revealed striking differences in the expression of genes associated with hypoxia, mitochondria and metabolism. Finally, we utilized the huBM-sc MLL-AF9 B-ALL model to evaluate the efficacy of the I-BET151 inhibitor in vivo. In conclusion, we have established human niche models in which the myeloid and lymphoid features of BCR-ABL+ and MLL-AF9+ leukemias can be studied in detail.

Influence of surface microstructure and chemistry on osteoinduction and osteoclastogenesis by biphasic calcium phosphate discs.

It has been reported that surface microstructural dimensions can influence the osteoinductivity of calcium phosphates (CaPs), and osteoclasts may play a role in this process. We hypothesised that surface structural dimensions of ≤ 1 µm trigger osteoinduction and osteoclast formation irrespective of macrostructure (e.g., concavities, interconnected macropores, interparticle space) or surface chemistry. To test this, planar discs made of biphasic calcium phosphate (BCP: 80% hydroxyapatite, 20% tricalcium phosphate) were prepared with different surface structural dimensions - either ~ 1 µm (BCP1150) or ~ 2-4 µm (BCP1300) - and no macropores or concavities. A third material was made by sputter coating BCP1150 with titanium (BCP1150Ti), thereby changing its surface chemistry but preserving its surface structure and chemical reactivity. After intramuscular implantation in 5 dogs for 12 weeks, BCP1150 formed ectopic bone in 4 out of 5 samples, BCP1150Ti formed ectopic bone in 3 out of 5 samples, and BCP1300 formed no ectopic bone in any of the 5 samples. In vivo, large multinucleated osteoclast-like cells densely colonised BCP1150, smaller osteoclast-like cells formed on BCP1150Ti, and osteoclast-like cells scarcely formed on BCP1300. In vitro, RAW264.7 cells cultured on the surface of BCP1150 and BCP1150Ti in the presence of osteoclast differentiation factor RANKL (receptor activator for NF-κB ligand) proliferated then differentiated into multinucleated osteoclast-like cells with positive tartrate resistant acid phosphatase (TRAP) activity. However, cell proliferation, fusion, and TRAP activity were all significantly inhibited on BCP1300. These results indicate that of the material parameters tested - namely, surface microstructure, macrostructure, and surface chemistry - microstructural dimensions are critical in promoting osteoclastogenesis and triggering ectopic bone formation.

Influence of fluoride in poly(d,l-lactide)/apatite composites on bone formation.

The influence of fluoride in poly(d,l-lactide)/apatite composites on ectopic bone formation was evaluated in sheep. Nano-apatite powders with different replacement levels of OH groups by fluoride (F) (0% (F0), 50% (F50), 100% (F100), and excessive (F200)) were co-extruded with poly (d,l-lactide) at a weight ratio of 1:1. Fluoride release from the composites (CF0, CF50, CF100, and CF200) was evaluated in vitro and bone formation was assessed after intramuscular implantation in sheep. After 24 weeks in simulated physiological solution, CF0 and CF50 showed negligible fluoride release, whereas it was considerable from the CF100 and CF200 composites. Histology showed that the incidence of de novo bone formation decreased in implants with increasing fluoride content indicating a negative influence of fluoride on ectopic bone formation. Furthermore, a significant decrease in resorption of the high fluoride-content composites and a reduction in the number of multinucleated giant cells were seen. These results show that instead of promoting, the presence of fluoride in poly(d,l-lactide)/apatite composites seemed to suppresses their resorption and osteoinductive potential in non-osseous sites.

Submicron-scale surface architecture of tricalcium phosphate directs osteogenesis in vitro and in vivo.

A current challenge of synthetic bone graft substitute design is to induce bone formation at a similar rate to its biological resorption, matching bone's intrinsic osteoinductivity and capacity for remodelling. We hypothesise that both osteoinduction and resorption can be achieved by altering surface microstructure of beta-tricalcium phosphate (TCP). To test this, two TCP ceramics are engineered with equivalent chemistry and macrostructure but with either submicron- or micron-scale surface architecture. In vitro, submicron-scale surface architecture differentiates larger, more active osteoclasts--a cell type shown to be important for both TCP resorption and osteogenesis--and enhances their secretion of osteogenic factors to induce osteoblast differentiation of human mesenchymal stem cells. In an intramuscular model, submicrostructured TCP forms 20 % bone in the free space, is resorbed by 24 %, and is densely populated by multinucleated osteoclast-like cells after 12 weeks; however, TCP with micron-scale surface architecture forms no bone, is essentially not resorbed, and contains scarce osteoclast-like cells. Thus, a novel submicron-structured TCP induces substantial bone formation and is resorbed at an equivalent rate, potentially through the control of osteoclast-like cells.

Poly(trimethylene carbonate) and biphasic calcium phosphate composites for orbital floor reconstruction: a feasibility study in sheep.

In the treatment of orbital floor fractures, bone is ideally regenerated. The materials currently used for orbital floor reconstruction do not lead to the regeneration of bone. Our objective was to render polymeric materials based on poly(trimethylene carbonate) (PTMC) osteoinductive, and to evaluate their suitability for use in orbital floor reconstruction. For this purpose, osteoinductive biphasic calcium phosphate (BCP) particles were introduced into a polymeric PTMC matrix. Composite sheets containing 50 wt% BCP particles were prepared. Also laminates with poly(D,L-lactide) (PDLLA) were prepared by compression moulding PDLLA films onto the composite sheets. After sterilisation by gamma irradiation, the sheets were used to reconstruct surgically-created orbital floor defects in sheep. The bone inducing potential of the different implants was assessed upon intramuscular implantation. The performance of the implants in orbital floor reconstruction was assessed by cone beam computed tomography (CBCT). Histological evaluation revealed that in the orbital and intramuscular implantations of BCP containing specimens, bone formation could be seen after 3 and 9 months. Analysis of the CBCT scans showed that the composite PTMC sheets and the laminated composite sheets performed well in orbital floor reconstruction. It is concluded that PTMC/BCP composites and PTMC/BCP composites laminated with PDLLA have osteoinductive properties and seem suitable for use in orbital floor reconstruction.

Scaffolds with a standardized macro-architecture fabricated from several calcium phosphate ceramics using an indirect rapid prototyping technique.

Calcium phosphate ceramics, commonly applied as bone graft substitutes, are a natural choice of scaffolding material for bone tissue engineering. Evidence shows that the chemical composition, macroporosity and microporosity of these ceramics influences their behavior as bone graft substitutes and bone tissue engineering scaffolds but little has been done to optimize these parameters. One method of optimization is to place focus on a particular parameter by normalizing the influence, as much as possible, of confounding parameters. This is difficult to accomplish with traditional fabrication techniques. In this study we describe a design based rapid prototyping method of manufacturing scaffolds with virtually identical macroporous architectures from different calcium phosphate ceramic compositions. Beta-tricalcium phosphate, hydroxyapatite (at two sintering temperatures) and biphasic calcium phosphate scaffolds were manufactured. The macro- and micro-architectures of the scaffolds were characterized as well as the influence of the manufacturing method on the chemistries of the calcium phosphate compositions. The structural characteristics of the resulting scaffolds were remarkably similar. The manufacturing process had little influence on the composition of the materials except for the consistent but small addition of, or increase in, a beta-tricalcium phosphate phase. Among other applications, scaffolds produced by the method described provide a means of examining the influence of different calcium phosphate compositions while confidently excluding the influence of the macroporous structure of the scaffolds.

Heterotopic bone formation by nano-apatite containing poly(D,L-lactide) composites.

To render polymeric materials osteoinductive, nano-sized calcium phosphate apatite particles (CaP) were introduced into a low molecular weight poly(D,L-lactide). Homogenous composites were made with 10%, 20% and 40% by weight of apatite content while pure polylactide was used as control. Thereafter porous samples (pore size 300-400 microm, 60% porosity) were fabricated and sterilized. In vitro studies showed that calcium ions were released from the composites depending on the apatite content, while surface mineral deposition was observed only on the 40% CaP composites in simulated body fluid (SBF) within 14 days. After 12 weeks of intramuscular implantation in dogs, only the 40% CaP composite implant retained its shape and showed ectopic bone formation within the pores. In conclusion, adding a content of 40% apatite into poly(D,L-lactide) could lead to an osteoinductive material. Future studies will focus on understanding this phenomenon of material-directed osteoinduction in order to develop a promising bone graft substitute.

Human tissue-engineered bone produced in clinically relevant amounts using a semi-automated perfusion bioreactor system: a preliminary study.

The aim of this study was to evaluate a semi-automated perfusion bioreactor system for the production of clinically relevant amounts of human tissue-engineered bone. Human bone marrow stromal cells (hBMSCs) of eight donors were dynamically seeded and proliferated in a perfusion bioreactor system in clinically relevant volumes (10 cm(3)) of macroporous biphasic calcium phosphate scaffolds (BCP particles, 2-6 mm). Cell load and distribution were shown using methylene blue staining. MTT staining was used to demonstrate viability of the present cells. After 20 days of cultivation, the particles were covered with a homogeneous layer of viable cells. Online oxygen measurements confirmed the proliferation of hBMSCs in the bioreactor. After 20 days of cultivation, the hybrid constructs became interconnected and a dense layer of extracellular matrix was present, as visualized by scanning electron microscopy (SEM). Furthermore, the hBMSCs showed differentiation towards the osteogenic lineage as was indicated by collagen type I production and alkaline phosphatase (ALP) expression. We observed no significant differences in osteogenic gene expression profiles between static and dynamic conditions like ALP, BMP2, Id1, Id2, Smad6, collagen type I, osteocalcin, osteonectin and S100A4. For the donors that showed bone formation, dynamically cultured hybrid constructs showed the same amount of bone as the statically cultured hybrid constructs. Based on these results, we conclude that a semi-automated perfusion bioreactor system is capable of producing clinically relevant and viable amounts of human tissue-engineered bone that exhibit bone-forming potential after implantation in nude mice.

Expansion of human mesenchymal stromal cells on microcarriers: growth and metabolism.

Adult stem cells, or mesenchymal stromal cells (MSCs), are of great potential for cell therapy and tissue-engineering applications. However, for therapeutic use, these cells need to be isolated from tissue or a biopsy and efficiently expanded, as they cannot be harvested in sufficient quantities from the body. In our opinion, efficient expansion of MSCs can be achieved in a microcarrier-based cultivation system. This study selected a suitable microcarrier for human bone marrow-derived stromal cells (HBMSCs), optimized cell-seeding strategies by varying serum concentrations, and optimized dynamic expansion of the HBMSCs in a microcarrier-based spinner flask cultivation system by applying various feeding regimes. Cytodex 1 microcarriers in combination with a low-serum concentration (0-5%) in the medium resulted in the highest seeding efficiency for the HBMSCs. Subsequently, significant expansion of the HBMSCs on these carriers has been observed. The highest number of HBMSCs population doublings (4.8 doublings) was obtained by a combination of 50% medium refreshment combined with addition of 30% medium containing microcarriers every 3 days. Exponential cell growth was observed for at least 9 days after seeding, provided that sufficient nutrients (such as glucose) were present, metabolite concentrations (such as ammonia) were kept below growth-inhibitory concentrations and adequate surface area was present for the cells. After dynamic expansion of the HBMSCs, the cells retained their differentiation potential and their cell surface markers, indicating that HBMSCs expansion on Cytodex 1 microcarriers did not alter the phenotypic properties of the cells.

Expansion of mesenchymal stem cells using a microcarrier-based cultivation system: growth and metabolism.

For the continuous and fast expansion of mesenchymal stem cells (MSCs), microcarriers have gained increasing interest. The aim of this study was to evaluate the growth and metabolism profiles of MSCs, expanded in a microcarrier-based cultivation system. We investigated various cultivation conditions to expand goat mesenchymal stem cells on Cytodex 1 microcarriers. These conditions differed in feeding regime, i.e. the addition of fresh proliferation medium, with or without new microcarriers. For all conditions, cell attachment, cell proliferation, energy source consumption, metabolite production, and cell distribution on the microcarriers were studied. Attachment efficiencies of 40% were obtained followed by successful expansion up to 15 cultivation days. Depending on the feeding regime, an exponential growth, stationary growth, and decline growth phase could be distinguished. Addition of 30% fresh medium containing microcarriers every three days showed the longest continuous proliferation of goat MSCs on microcarriers. This feeding regime has the advantage that metabolites, such as ammonia, are diluted and that new energy sources, such as glucose and glutamine, and additional surface area are provided to the cells. In addition, by adding extra microcarriers a more homogenous cell distribution on the microcarriers is obtained as a result of bead-to-bead transfer. A correlation between nutrient consumption, metabolite production and cell growth was observed. The decreasing yield of lactate from glucose over time indicated a possible shift in cellular metabolism.

Ectopic bone formation in bone marrow stem cell seeded calcium phosphate scaffolds as compared to autograft and (cell seeded) allograft.

Improvements to current therapeutic strategies are needed for the treatment of skeletal defects. Bone tissue engineering offers potential advantages to these strategies. In this study, ectopic bone formation in a range of scaffolds was assessed. Vital autograft and devitalised allograft served as controls and the experimental groups comprised autologous bone marrow derived stem cell seeded allograft, biphasic calcium phosphate (BCP) and tricalcium phosphate (TCP), respectively. All implants were implanted in the back muscle of adult Dutch milk goats for 12 weeks. Micro-computed tomography (microCT) analysis and histomorphometry was performed to evaluate and quantify ectopic bone formation. In good agreement, both microCT and histomorphometric analysis demonstrated a significant increase in bone formation by cell-seeded calcium phosphate scaffolds as compared to the autograft, allograft and cell-seeded allograft implants. An extensive resorption of the autograft, allograft and cell-seeded allograft implants was observed by histology and confirmed by histomorphometry. Cell-seeded TCP implants also showed distinct signs of degradation with histomorphometry and microCT , while the degradation of the cell-seeded BCP implants was negligible. These results indicate that cell-seeded calcium phosphate scaffolds are superior to autograft, allograft or cell-seeded allograft in terms of bone formation at ectopic implantation sites. In addition, the usefulness of microCT for the efficient and non-destructive analysis of mineralised bone and calcium phosphate scaffold was demonstrated.

A comparison of bone formation in biphasic calcium phosphate (BCP) and hydroxyapatite (HA) implanted in muscle and bone of dogs at different time periods.

Physicochemical modification could implement synthetic materials into osteoinductive materials, which induce bone formation in nonosseous tissues. We hereby studied the relevance between the osteogenic capacities of osteoinductive materials in nonosseous tissues and in osseous sites. Biphasic calcium phosphate ceramic (BCP) and hydroxyapatite ceramic (HA) were implanted in femoral muscles and femoral cortical bone of dogs for 7, 14, 21, 30, 45, 60, 90, 180, and 360 days, respectively. Two dogs were used in each time point. In each dog, four cylinders (phi5x6 mm) per material were implanted in femoral muscles and 2 cylinders (phi5x6 mm) per material in femoral cortical bone. The harvested samples were processed for both histological and histomorphometric analyses. Bone was observed in BCP implanted in femoral muscles since day 30, while in HA since day 45. Quantitatively, more bone was formed in BCP than in HA at each time point after day 30 (p<0.05). The earlier and more bone formed in BCP than in HA suggests BCP a higher osteoinductive potential than HA in muscle. In femoral cortical bone defects, a bridge of bone in the defect with BCP was observed at day 21, while with HA at day 30. At days 14, 21, and 30, significantly more bone was formed in BCP than in HA (p<0.05). The results herein show that osteogenic capacities of osteoinductive materials in nonosseous tissues and osseous sites are correlated: the higher the osteoinductive potential of the material, the faster the bone repair.

Parallel high-resolution confocal Raman SEM analysis of inorganic and organic bone matrix constituents.

In many multi-disciplinary fields of science, such as tissue engineering, where material and biological sciences are combined, there is a need for a tool that combines ultrastructural and chemical data analysis in a non-destructive manner at high resolution. We show that a combination of confocal Raman spectroscopy (CRS) and scanning electron microscopy (SEM) can be used for such analysis. Studies of atomic composition can be done by X-ray microanalysis in SEM, but this is only possible for atomic numbers greater than five and does not reveal molecular identity. Raman spectroscopy, however, can provide information on molecular composition and identity by detection of wavelength shifts caused by molecular vibrations. In this study, CRS-SEM revealed that early in vitro-formed bone extracellular matrix (ECM) produced by rat osteoprogenitor cells resembles mature bone chemically. We gained insight into the structure and chemical composition of the ECM, which was composed of mainly mineralized collagen type I fibres and areas of dense carbonated calcium phosphate related to the collagen fibre density, as revealed by Raman imaging of SEM samples. We found that CRS-SEM allows the study of specimens in a non-destructive manner and provides high-resolution structural and chemical information about inorganic and organic constituents by parallel measurements on the same sample.

Relation between in vitro and in vivo osteogenic potential of cultured human bone marrow stromal cells.

The use of cell therapies in bone reconstruction has been the subject of extensive research. It is known that human bone marrow stromal cell (HBMSC) cultures contain a population of progenitor cells capable of differentiation towards the osteogenic lineage. In the present study, the correlation between the in vitro osteogenic potential of HBMSC cultures and their capacity to form bone in vivo was investigated. HBMSC cultures were established from 14 different donors. Fourth passage cells were examined for the expression of alkaline phosphatase (ALP), procollagen I (PCI) and osteopontin (OP), through flow cytometry and the effect of the osteogenic differentiation factor dexamethasone (Dex) on this expression was evaluated. In addition, the capacity of the cultures to induce in vivo bone formation was analysed by culturing the cells on porous hydroxyapatite (HA) scaffolds followed by subcutaneous implantation of these constructs in nude mice. Results showed expression of PCI, OP and ALP in all cultures, irrespective of the presence of Dex in the culture medium. Dex failed to have a significant effect on the expression of PCI and OP but it induced a consistent increase in the relative amount of cells expressing ALP. Nevertheless, although in vitro testing clearly indicated osteogenic potential in all cultures, HBMSC from six of the 14 tested donors did not form bone in vivo. The results, therefore, demonstrate that neither the expression of PCI, OP and ALP nor the absolute increase in Dex-stimulated ALP expression can as yet be used as predictive markers for in vivo bone formation by HBMSC. However, preliminary data indicate that not the absolute, but the relative increase in the percentage of ALP expressing cells caused by Dex stimulation may be related to the ability of the HBMSC to form bone.

Genetic marking with the DeltaLNGFR-gene for tracing goat cells in bone tissue engineering.

The use of bone marrow derived stromal cells (BMSC's) for bone tissue engineering has gained much attention as an alternative for autologous bone grafting. Little is known however, about the survival and differentiation of the cells, especially in the clinical application. The aim of this study was to develop a method to trace goat BMSC's in vivo. We investigated retroviral genetic marking, which allows stable expression of the label with cell division. Goat BMSC's were subjected to an amphotropic envelope containing a MoMuLV-based vector expressing the human low affinity nerve growth factor receptor (DeltaLNGFR). Labeling efficiency and effect on the cells were analyzed. Furthermore, transduced cells were seeded onto porous ceramic scaffolds, implanted subcutaneously in nude mice and examined after successive implantation periods. Flow cytometry indicated a transduction efficiency of 40-60%. Immunohistochemistry showed survival and subsequent bone formation of the gene-marked cells in vivo. Besides, marked cells were also found in cartilage and fibrous tissue. These findings indicate the maintenance of the precursor phenotype following gene transfer as well as the ability of the gene to be expressed following differentiation. We conclude that retroviral gene marking with DeltaLNGFR is applicable to trace goat BMSC's in bone tissue engineering research.

Bone tissue engineering for spine fusion: an experimental study on ectopic and orthotopic implants in rats.

Alternatives to the use of autologous bone as a bone graft in spine surgery are needed. The purpose of this study was to examine tissue-engineered bone constructs in comparison with control scaffolds without cells in a posterior spinal implantation model in rats. Syngeneic bone marrow cells were cultured in the presence of bone differentiation factors and seeded on porous hydroxyapatite particles. Seven rats underwent a posterior surgical approach, in which scaffolds with (five rats) or without cells (two rats) were placed on both sides of the lumbar spine. In addition, separate scaffolds were inserted intramuscularly and subcutaneously during the surgical procedure. After 4 weeks, all rats were killed and examined radiographically, by manual palpation of the excised spine and histologically for signs of bone formation or spine fusion. All rats that received cell-seeded scaffolds showed newly formed bone in all three locations, whereas none of the locations in the control rats showed bone formation. The results of this study support the concept of developing tissue-engineering techniques in posterior spine fusion as an alternative to autologous bone.

Design and fabrication of standardized hydroxyapatite scaffolds with a defined macro-architecture by rapid prototyping for bone-tissue-engineering research.

This investigation describes the production and characterization of calcium phosphate scaffolds with defined and reproducible porous macro-architectures and their preliminary in vitro and in vivo bone-tissue-engineered response. Fugitive wax molds were designed and produced using a rapid prototyping technique. An aqueous hydroxyapatite slurry was cast in these molds. After sintering at 1250 degrees C and then cleaning, dimensional and material characterizations of the scaffolds were performed. The resulting scaffolds represented the design, and their dimensions were remarkably consistent. A texture inherent to the layer-by-layer production of the mold was impressed onto the vertical surfaces of the scaffolds. The surface roughness (R(a)) of the textured surfaces was significantly greater than that of the nontextured surfaces. Material analyses revealed a beta-TCP phase in addition to hydroxyapatite for the molded ceramics. Non-molded control ceramics exhibited only hydroxyapatite. Thirty scaffolds were seeded with culture-expanded goat bone-marrow stromal cells (BMSCs) and implanted subcutaneously in nude mice for 4 or 6 weeks. Histology revealed mineralized bone formation in all the scaffolds for both implantation periods. After 4 weeks, bone was present primarily as a layer on scaffold surfaces. After 6 weeks, the surface bone formation was accompanied by bone budding from the surface and occasional bridging of pores. This budding and bridging bone formation almost always was associated with textured scaffold surfaces. However, the area percentage of bone in pores was similar for the 4- and 6-week implantation periods.