Effect of (bio)surfactant type and concentration on the gas-liquid equilibrium partitioning of hydrophobic volatile organic compounds.

The biological removal of hydrophobic volatile organic compounds (VOCs) is limited by their low water solubility and, therefore, low bioavailability. The addition of surfactants is a promising strategy, but to gain understanding and broaden its applicability, its effect on the solubility of hydrophobic VOCs should be investigated. This study evaluates the effect of 2 synthetic surfactants (sodium dodecyl sulfate (SDS) and Tween 80) and 3 biological surfactants (surfactin, rhamnolipid and saponin) on the gas-to-liquid equilibrium partitioning coefficient (KGL) of 7 hydrophobic VOCs at different critical micelle concentrations (CMC). For all VOCs, a decrease in their KGL was observed when a (bio)surfactant was added at 1 and 3 CMC. The highest decrease in KGL (71 - 96 %) was observed for all compounds when SDS was added at 3 CMC, whereas the smallest effect was noticed when Tween 80 or surfactin (5.1 - 75 %) were added at both concentrations. The results are explained in terms of the (bio)surfactant and VOC physical-chemical properties (e.g. CMC and polarity). This is the first study evaluating the effect of biological surfactants on KGL. These fundamental data are essential to improve the design and modeling of air treatment systems using (bio)surfactants.

Dynamic performance of a fungal biofilter packed with perlite for the abatement of hexane polluted gas streams using SIFT-MS and packing characterization with advanced X-ray spectroscopy.

The use of Fusarium solani fungi in an expanded perlite packed biofilter was investigated for the treatment of a hexane polluted waste gas stream using selected ion flow tube mass spectrometry (SIFT-MS). The latter analytical technique proved to be of utmost importance to evaluate the performance of the biofilter at high time resolution (seconds) under various transient conditions, analogous to industrial situations. The biofilter was operational for 277 days with inlet loads varying between 1 and 14 g m-3 h-1 and applying an empty bed residence time of 116 s. The results showed a positive behaviour of the biofilter against different types of disruptions such as: (i) changes in the relative humidity of the inlet gas, (ii) stopping the carbon supply for 1, 5 and 10 days, (iii) varying the inlet hexane concentration (step increases and intermittent pulses) and (iv) limiting the availability of nutrients. X-ray imaging (both conventional 2D µCT and X-ray fluorescence, XRF) was applied for the first time on biofilter media in order to get insight in the internal structure of expanded perlite and to visualise the biomass growth. The latter in combination with online porosity measurements using SIFT-MS provides fundamental information regarding the biofiltration process.

Effect of hydrophobic fumed silica addition on a biofilter for pentane removal using SIFT-MS.

Biofiltration is a typical air pollution control process for the treatment of volatile organic compounds (VOCs). Mass transfer of hydrophobic VOCs to the biofilm is limited which leads to low removal efficiency (RE). Aiming to enhance the transport of hydrophobic VOCs, the effect of hydrophobic fumed silica (HFS) addition to a biofilter (BF) for pentane removal was studied in this paper. The effect of HFS on pentane removal was evaluated by daily RE measurements and periodical headspace gas pentane pulse injections using SIFT-MS as analysis apparatus. The BF was operated during more than 100 days at an empty bed residence time (EBRT) of 120 s reaching an elimination capacity (EC) up to 93.8 g pentane m-3 h-1. At the last stage of the study, when a higher nutrient pulse and HFS to a concentration of 1.5% w/w wet were added, the BF showed better EC (46.3 ± 14.9 g pentane m-3 h-1; RE = 96.2%) compared to the previous stages (28.3 ± 4.4 g pentane m-3 h-1; RE = 68.3%). This overall performance improvement was in line with the short peak perturbation experiments carried out during the operational time which demonstrated, by net retention time (NRT) determination, to be a fast and reliable tool to gain insights into the behaviour of pollutants inside the BF and its state. Pentane demonstrated to have larger interactions with the packing material when HFS was added. NRT/EBRT ratio variated along the whole operational time, being larger at the last stage.