Recycling and Reuse of Spent LIBs: Technological Advances and Future Directions.

Recovering valuable metals from spent lithium-ion batteries (LIBs), a kind of solid waste with high pollution and high-value potential, is very important. In recent years, the extraction of valuable metals from the cathodes of spent LIBs and cathode regeneration technology are still rapidly developing (such as flash Joule heating technology to regenerate cathodes). This review summarized the studies published in the recent ten years to catch the rapid pace of development in this field. The development, structure, and working principle of LIBs were firstly introduced. Subsequently, the recent developments in mechanisms and processes of pyrometallurgy and hydrometallurgy for extracting valuable metals and cathode regeneration were summarized. The commonly used processes, products, and efficiencies for the recycling of nickel-cobalt-manganese cathodes (NCM/LCO/LMO/NCA) and lithium iron phosphate (LFP) cathodes were analyzed and compared. Compared with pyrometallurgy and hydrometallurgy, the regeneration method was a method with a higher resource utilization rate, which has more industrial application prospects. Finally, this paper pointed out the shortcomings of the current research and put forward some suggestions for the recovery and reuse of spent lithium-ion battery cathodes in the future.

Experimental study on adsorption of PbCl2 and CdCl2 on kaolin modified by leachates from municipal solid waste incineration power plant.

Six kinds of waste liquids produced in the treatment process of leachate in a waste incineration plant were used to improve the adsorption effect of raw kaolin on heavy metal chloride. The capture performances of these modified kaolin on PbCl2 and CdCl2 vapor were investigated in a two-stage fixed bed combustor. The results indicated that the adsorption effects of raw kaolin on PbCl2 and CdCl2 were improved in some experimental groups, main effective component was Na+ in the leachate, but the influences did not change regularly with the increase in the concentration of Na + introduced into kaolin. The adsorbents formed by modifying 10 g kaolin with 21.25 ml leachate 2 were the best adsorbents for PbCl2 and CdCl2. The capture efficiencies of PbCl2 and CdCl2 can reach 95% and 63.88%, with the increase of 36% and 53%, respectively. Using leachate as modifying agent had the same effect as directly using Na+. Adsorptions of PbCl2 and CdCl2 were still mainly chemical adsorptions. After adsorption of PbCl2, the modified kaolin not only generated PbA12Si2O8, but also produced other chemical compounds. The adsorption of CdCl2 by modified kaolin did not generate CdAl2Si2O8, but other chemical reactions occurred to generate CdAl2O4 and Pb8Cd (Si2O7)3.

Effect of granulation on chlorine-release behavior during municipal solid waste incineration.

The preparation of refuse-derived fuel (RDF) is an effective and simple means of rural municipal solid waste utilization. The release of chlorine during RDF combustion is important as it causes high-temperature corrosion and pollutants emission such as HCl, dioxins, etc. In this paper, constant-temperature and increasing-temperature combustion experiments were carried out using an electrically heating furnace to analyse the effects of granulation (pressure and additives) on the release of chlorine in particles. During the constant-temperature combustion below 800 °C, only organic chlorine was released from the RDF. The increase of granulation pressure from 1 MPa to 10 MPa did not affect the total amount of chlorine release, but delayed the organic chlorine release by increasing the gas diffusion resistance. During the constant-temperature combustion above 900 °C, inorganic chlorine was released as well. The increase of granulation pressure enhanced the inorganic chlorine release significantly by promoting the reactants contact. During the increasing-temperature combustion, the increase of granulation pressure delayed the organic chlorine release as well but inhibited the inorganic chlorine release. This was mainly attributed to the slow temperature rise to 900 °C, during which the inherent calcium in the RDF reacted with silicon and aluminium, resulting in less reactants for an inorganic chlorine release reaction. Three calcium-based additives were used to inhibit chlorine release. CaCO3 showed no dechlorination effect, and CaO showed better dechlorination effect than Ca(OH)2. For the constant-temperature combustion at 900 °C, the addition of CaO with a Ca/Cl ratio of 2 achieved a dechlorination efficiency of over 90%, with little influence from the granulation pressure. For the increasing-temperature combustion, the granulation pressure had a significant influence on CaO dechlorination effectiveness. Only at a granulation pressure as high as 10 MPa, did the addition of CaO with the Ca/Cl ratio of 2.5 achieve a dechlorination efficiency of 95%.

Typical Gaseous Semi-Volatile Metals Adsorption by Meta-Kaolinite: A DFT Study.

Kaolinite can be used as in-furnace adsorbent to capture gaseous semi-volatile metals during combustion, incineration, or gasification processes for the purposes of toxic metals emission control, ash deposition/slagging/corrosion inhibition, ultrafine particulate matter emission control, and so on. In this work, the adsorptions of typical heavy metals (Pb and Cd) and typical alkali metals (Na and K) by meta-kaolinite were investigated by the DFT calculation. The adsorption energies followed the sequence of NaOH-Si surface > KOH-Si surface > PbO-Al surface ≈ CdO-Al surface ≈ NaOH-Al surface > KOH-Al surface > NaCl-Al surface ≈ Na-Si surface > Na-Al surface > KCl-Al surface > Pb-Al surface > PbCl2-Al surface > CdCl2-Al surface ≈ K-Si surface ≈ PbCl-Al surface > K-Al surface > CdCl-Al surface > NaCl-Si surface > KCl-Si surface > Cd-Al surface. Si surface was found available to the adsorptions of Na, K, and their compounds, although it was invalid to the adsorptions of Pb, Cd, and their compounds. The interactions between adsorbates and surfaces were revealed. Furthermore, the discussion of combining with the experimental data was applied to the subject validity of calculation results and the effect of chlorine on adsorption and the effect of reducing atmosphere on adsorption.

High-temperature chlorination of PbO and CdO induced by interaction with NaCl and Si/Al matrix.

Municipal solid-waste incineration leads to emission of lead (Pb) and cadmium (Cd), which vaporize in furnace and condense in flue. NaCl in waste has been proven to enhance volatilization of Pb and Cd at high temperatures via chlorination of oxides to chlorides; however, this process was not well-understood so far due to its complexity. This study decoupled the indirect chlorination process and direct chlorination process so that these two processes were investigated separately. A horizontal tube furnace was used to heat the mixtures of NaCl and Si/Al matrix for indirect chlorination and the mixtures of NaCl, PbO/CdO and Si/Al matrix for direct chlorination. A set of dynamic sampling devices was designed and used to obtain dynamic data during temperature rising. The indirect chlorination process was initiated above 800 °C in O2 + H2O atmosphere and O2 atmosphere and above 1000 °C in N2 atmosphere. Al2O3 exhibited higher activity than SiO2 to react with NaCl, releasing HCl or Cl2. In the Cl release reaction, NaCl was in the gas phase. The direct chlorination process was initiated at 650-700 °C when the Si/Al matrix contained SiO2 only and at around 800 °C when the Si/Al matrix contained Al2O3 only or both SiO2 and Al2O3. SiO2 exhibited higher activity than Al2O3 in direct chlorination. The pre-reaction between PbO/CdO and Si/Al matrices was considered as the necessary condition for direct chlorination. During chlorination in O2 + H2O atmosphere, indirect chlorination and direct chlorination occurred simultaneously, and the latter dominated the volatilization of Pb and Cd.