1064 nm rotational Raman polarization lidar for profiling aerosol and cloud characteristics.

The vertical profiles of aerosol or mixed-phase cloud optical properties (e.g. extinction coefficient) at 1064 nm are difficult to obtain from lidar observations. Based on the techniques of rotational Raman signal at 1058 nm described by Haarig et al. [Atmos. Meas. Tech.9, 4269 (2016)10.5194/amt-9-4269-2016], we have developed a novel rotational Raman polarization lidar at 1064 nm at Wuhan University. In this design, we optimized the central wavelength of the rotational Raman channel to 1056 nm with a bandwidth of 6 nm to increase the signal-to-noise ratio and minimize the temperature dependence of the extracted rotational Raman spectrum. And then separated elastic polarization channels (1064 nm Parallel, P and 1064 nm Cross, S) into near range (low 1064 nm P and 1064 nm S) and far range detection channels (high 1064 nm P and 1064 nm S) to extend the dynamic range of lidar observation. Silicon single photon avalanche diodes (SPAD) working at photon counting mode were applied to improve the quantum efficiency and reduce the electronic noise, which resulted in quantum efficiency of 2.5%. With a power of 3 W diode pumped pulsed Nd:YAG laser and aperture of 250 mm Cassegrain telescope, the detectable range can cover the atmosphere from 0.3 km to the top troposphere (about 12-15 km). To the best of our knowledge, the design of this novel lidar system is described and the mixed-phase cloud and aerosol optical properties observations of backscatter coefficients, extinction coefficients, lidar ratio and depolarization ratio at 1064 nm were performed as demonstrations of the system capabilities.

Improved algorithm for retrieving aerosol optical properties based on multi-wavelength Raman lidar.

Multi-wavelength Raman lidar has been widely used in profiling aerosol optical properties. The accuracy of measured aerosol optical properties largely depends on sophisticated lidar data retrieval algorithms. Commonly to retrieve aerosol optical properties of Raman lidar, the extinction-related Ångström exponent (EAE) is assumed (to be 1). This value usually generally differs from the true value (called EAE deviation) and adds uncertainty to the retrieved aerosol optical properties. Lidar-signal noise and EAE-deviation are two important error sources for retrieving aerosol optical properties. As the measurement accuracy of Raman lidar has been greatly improved in recent years, the influence of signal noise on retrieval results becomes relatively small, and the uncertainty of retrieved aerosol optical properties caused by an EAE-deviation becomes nonnegligible, especially in scenes that EAE deviation is large. In this study, an iteration retrieval algorithm is proposed to obtain more reliable EAE based on multi-wavelength Raman lidar. Results from this iteration are more precise values of aerosol optical properties. Three atmospheric scenarios where aerosol distribution and the values of EAE vary widely were simulated with a Monte Carlo method to analyze the characteristics and robustness of the iterative algorithm. The results show that the proposed iterative algorithm can eliminate the systematic errors of aerosol optical properties retrieved by traditional retrieval method. The EAEs after iteration does converge to the true value, and the accuracy of aerosol optical properties can be greatly improved, especially for the particle backscatter coefficient and lidar ratio, which has been improved by more than 10% in most cases, and even more than 30%. In addition, field observations data of a three-wavelength Raman lidar are analyzed to illustrate the necessity and reliability of the proposed iterative retrieval algorithm.

Simulation and misalignment analysis of the gain ratio of a polarization Mie Raman lidar.

The gain ratio is a critical parameter in a polarization Mie lidar. Calibrating the gain ratio is essential in aerosol classification studies. We developed a ray-tracing-based simulation method to investigate the impact of mounting errors on the gain ratio. In this method, a computational model for each element of the lidar was built, and Zemax was used to simulate the lidar receiver to obtain the optical gain ratio by theoretical calculations. This method can analyze the influence of each element's mounting errors and offer a theoretical foundation for the machining and mounting accuracy of the lidar design. The correctness of the model was verified by applying it to a single-wavelength polarization Mie Raman lidar.

Simulation and misalignment analysis of the gain ratio of a polarization Mie Raman lidar: publisher's note.

This publisher's note serves to correct an error in Appl. Opt.61, 2881 (2022)APOPAI0003-693510.1364/AO.453852.

Analysis of differential metabolites in lung cancer patients based on metabolomics and bioinformatics.

Aim: Based on metabonomics, the metabolic markers of lung cancer patients were analyzed, combined with bioinformatics to explore the underlying disease mechanism. Materials & methods: Based on case-control design, using UPLC-Q-TOF/MS, urine metabolites were detected in discovery and validation set. Multivariate statistical analysis were performed to identify potential markers for lung cancer. A network analysis was constructed to integrate lung cancer disease targets with the above metabolic markers, and its possible mechanism and biological significance were explained. Results: A total of 35 potential markers were identified, 11 of which overlapped. Five key markers have a good linear correlation with serum biochemical indicators. Conclusion: The occurrence and development of lung cancer are closely related to disturbance of D-Glutamine and D-glutamate metabolism, amino acid imbalance. This test was registered on China clinical trial registration center (www.chictr.org.cn/index.aspx), registration number was ChiCTR1900025543.

[The echelle grating monochromator's design of pure rotational Raman Lidar].

The pure rotization oal Raman Lidar temperature measurement system usually retrieve atmospheric temperature according to the echo signal of high and low-level quantum numbers of N2 moleules. An effective method to detect the rotational Raman spectrum is taking a grating monochromator. In the present paper the detection principle and the structure of the echelle grating monochromator are described, the high order and lower order quantum number of the probe spectrum is resolved. The focal length of the collimating-focusing optical system is calculated by analyzing echelle grating's spectroscopic principle and dispersion ability. Subsequently spectral effect is simulated with Zemax software. The simulation result indicates that under the condition of the probe laser wavelength of 532 nm and using echelle grating monochromator, Rarnan spectrums of 529.05, 530.40, 533.77, 535.13 mn can be separated well, at the same time, the SNR of the system is enhanced by summing the spectral signals of symmetric quantum number. The echelle grating monochromator is small in size, and can easily meet the requirements of the miniaturization of Raman Lidar temperature measurement system.