Investigations of byzantine wall paintings in the abbey of Santa Maria di Cerrate (Italy) in view of their restoration.

In this paper, diagnostic analyses on 12th-13th century byzantine wall paintings in the abbey of Santa Maria di Cerrate (Southern Italy) were carried out preparatory to restoration work promoted by FAI (Fondo Ambiente Italiano). Both the pigments and the areas with a bleaching alteration in the frescoes were analysed using the energy dispersive X-ray fluorescence, the Raman spectroscopy and the scanning electron microscopy equipped with energy dispersive X-ray spectrometer. In particular, ED-XRF analyses were performed in situ on wall paintings, while Raman spectroscopy and SEM-EDX were accomplished on frescoes fragments. The results obtained allowed to determine the chemical composition of the pigments, helping to identify the original parts of the frescoes from the retouched ones. The work also provided important information about the historical-artistic context of the abbey. Archaeometric investigations have indeed revealed the pictorial technique used for the wall paintings of the abbey, as well as the presence of some very valuable pigments, such as lapis lazuli blue.

Exposure to static magnetic field stimulates quorum sensing circuit in luminescent Vibrio strains of the Harveyi clade.

In this study, the evidence of electron-dense magnetic inclusions with polyhedral shape in the cytoplasm of Harveyi clade Vibrio strain PS1, a bioluminescent bacterium living in symbiosis with marine organisms, led us to investigate the behavior of this bacterium under exposure to static magnetic fields ranging between 20 and 2000 Gauss. When compared to sham-exposed, the light emission of magnetic field-exposed bacteria growing on solid medium at 18°C ±0.1°C was increased up to two-fold as a function of dose and growth phase. Stimulation of bioluminescence by magnetic field was more pronounced during the post-exponential growth and stationary phase, and was lost when bacteria were grown in the presence of the iron chelator deferoxamine, which caused disassembly of the magnetic inclusions suggesting their involvement in magnetic response. As in luminescent Vibrio spp. bioluminescence is regulated by quorum sensing, possible effects of magnetic field exposure on quorum sensing were investigated. Measurement of mRNA levels by reverse transcriptase real time-PCR demonstrated that luxR regulatory gene and luxCDABE operon coding for luciferase and fatty acid reductase complex were significantly up-regulated in magnetic field-exposed bacteria. In contrast, genes coding for a type III secretion system, whose expression was negatively affected by LuxR, were down-regulated. Up-regulation of luxR paralleled with down-regulation of small RNAs that mediate destabilization of luxR mRNA in quorum sensing signaling pathways. The results of experiments with the well-studied Vibrio campbellii strain BB120 (originally classified as Vibrio harveyi) and derivative mutants unable to synthesize autoinducers suggest that the effects of magnetic fields on quorum sensing may be mediated by AI-2, the interspecies quorum sensing signal molecule.

Monitoring of total and bioavailable heavy metals concentration in agricultural soils.

The aim of this paper is to evaluate total and bioavailable concentration of heavy metals in agricultural soils in order to estimate their distribution, to identify the possible correlations among toxic elements and the pollution sources, to distinguish the samples in relation to sampling site or to sampling depth, and to evaluate the available fraction providing information about the risky for plants. In particular, we reinvestigated total concentrations of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sb, V, and Zn and available concentrations of As, Be, Cd, Cr, Cu, Hg, Ni, Pb, Sb, and Zn in soil from Apulia (Southern Italy). Analytical results showed that total concentrations, for all soils, are in the range permitted by regulations in force in Italy, but some soils evidence slight enrichment of Cd, Cr, Cu, Pb, and Zn. All the heavy metals in the available fraction were below the detection limits of the analytical techniques used except Cu, Ni, Pb, and Zn.

Testing the photosynthetic bacterium Rhodobacter sphaeroides as heavy metal removal tool.

We present some preliminary results relevant to the ability of the purple non-sulphur bacterium Rhodobacter sphaeroides strain R26.1 to sequester heavy metals from contaminated growth media. The microorganism was chosen because of its significant tolerance to relatively high concentrations of the investigated ions Ni2+, Co2+, CrO4(2-), and MoO4(2-). In this paper the optimized conditions for the bacterial growth and the sample preparation used to infer the ability of the microorganism to cope with metal pollutants are presented. Elemental analysis has been performed by inductively coupled plasma atomic emission spectrometry previous mineralization of samples by a microwave system.

Natural sources and heavy metals.

PTS, PM10 and PM2.5 samples have been collected at a rural site of south-east Italy (40 degrees 20' 13" N; 18 degrees 6' 47" E) from June to October, 2004 to investigate natural and anthropogenic contributions on particulate matter and heavy metal mass concentrations. It is shown that sharp-peak particulate-matter concentrations have been recorded during most African dust outbreaks occurred over south-east Italy. In particular, PM10 concentrations exceeding the 24-hour limit value of 50 microg/m3 have been monitored during dust events. Al, Cd, Cr, Cu, Fe, Mn, V, Ni, Pb, and Zn metal concentrations have been evaluated by an inductively coupled plasma atomic emission spectrometer and Al mass concentrations >500 ng/m3 have been observed in PTS and PM10 samples during the advection of African dust particles. Accordingly to geochemical calculations Al, Fe, and Mn, have a significant crustal origin while, Cd, Cu, Pb, and Zn are of anthropogenic origin. Moreover, Fe resulted predominant in the coarse particle fraction, while Ni, Pb, V, and Zn were predominant in the fine particle fraction. It is also shown that Cd, Mn, Ni, Pb, and V concentrations never exceeded guide and/or limit values recommended by the World Health Organization and the European Council Directives.

Heavy metals in PM10 sampled in the urban area of Campi Salentina (Apulia, southern Italy).

The following paper shows results of PM10 level and Cd, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn concentrations present in this fraction for filters collected in the urban area of Campi Salentina (Apulia, Southern Italy) in 2004 in order to inquire into air quality. PM10 and lead concentrations did not exceed the standard values sanctioned by Italian Legislature with average values equal to 36.54 +/- 14.57 microg x m(-3) and 9.19 +/- 5.24 ng x m(-3) respectively. Significant correlations have been found between the pairs Fe-Mn, Ni-V, Cr-Ni and Cd-Cr. This suggests that these metals have a similar pollution source probably due to metallurgical activity. Multivariate statistical analysis showed that it is possible to distinguish the PM10 samples collected in sampling periods with different meteorological conditions. Indeed, metals concentration increases for samples characterized by scarce rains or by winds prevailing from North or North-West and is reduced due to different meteorological conditions, although there are some exceptions.

Particulate matter characterization at a coastal site in south-eastern Italy.

Several samples of airborne particulate matter (PM), collected from 6th November to 6th December 2003 at a coastal site in the south-east of Italy, have been analyzed by different techniques to characterize elemental composition and morphological properties of the inorganic PM fraction and obtain preliminary results on anthropogenic contributions. Al, Cr, Cu, Fe, Mn, V, Pb, Ti, Ca and Zn mass concentrations, evaluated by an inductively coupled plasma atomic emission spectrometer, account for up to l% of the bulk PM mass in the investigated samples. According to geochemical calculations, Ca, Al, Fe and Mn are predominantly of crustal origin, while Cr, Cu, Pb, V, Ti and Zn heavy metals are of anthropogenic origin. Ion chromatography analyses have identified sulfate (SO(4)(2-)) nitrate (NO(3)(-)), sodium (Na(+)), and ammonium (NH(4)(+)) as the main ionic components accounting for up to 38% of the total PM mass and up to 90% of the total ionic mass. Besides ion chromatography, X-ray energy dispersive (EDX) microanalyses have revealed the high variability of Cl: its weight concentration varies from about 24% to below the detection limit (>or=0.5%) in the investigated samples. The marked anti-correlation between the excess of S and the Cl/Na ratio has allowed inferring that reactions between sea salt particles and acidic sulfates, which liberate HCl gas to the atmosphere leaving particles enriched in non-sea-salt sulfates, have significantly contributed to chloride depletion. Morphological analyses by scanning electron microscopy have shown that about 90% of the total sampled particles have a diameter

PM-10 and heavy metals in particulate matter of the province of Lecce (Apulia, Southern Italy).

This paper shows the results of a preliminary study of air monitoring in the province of Lecce (Apulia, Southern Italy). In particular, the attention has been focused on the determination of the PM-10 level and of the concentration of nine metals (Cd, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn) present on the filters which were collected in two towns (Lecce and Campi Salentina) from 2002 until 2003. The metals have been chosen on the basis of their toxicity and of their possible use as chemical tracers. The results have proved that PM-10 values and metals concentrations did not show substantial difference between the two towns and that PM-10 level and lead concentration are below the limit established by Italian law in force. The experiments have demonstrated a high correlation between iron and manganese in both sampling sites; this could be attributed to pollution of metallurgical origin. Multivariate statistical analysis, carried out by HCA and PCA methods, has been used in order to differentiate samples in relation to sampling sites, sampling period and meteorological conditions.

Underground waters quality in the province of Lecce (Apulia, Southern Italy).

This paper shows the results of underground waters last monitoring in the province of Lecce (Apulia, Southern Italy). We carried out the physical-chemical characterization of the aquifers and their classification in accordance to limit values sanctioned by Italian legislation in force, by European directives and by FAO, in order to define their quality and to establish their possible use for drinkable and irrigation purposes. The attention has been focused on salinity evaluation and underground waters contamination phenomena, due to sea-water intrusion and to the use of fertilizers. Salinity and nitrates concentrations are high in a few wells. Iron and manganese concentrations are very high for almost every sample and this is due to corrosion phenomena of artesian wells metallic structure. For a better interpretation of data, multivariate statistical analysis has been used, in order to obtain the correlation among analytical results, soils hydro-geological properties and anthropic conditions.

Distribution and speciation of metals in surface sediments of Taranto [corrected] gulf (Ionian Sea, Southern Italy).

Concentrations of metals (Al, Fe, Ti, Ni, Mn, Cr, Zn, Cu, Pb) were determined in surface sediments from Taranto gulf (Ionian Sea, Southern Italy) in order to assess the distribution and the bioavailability of metals. Total metal content and speciation of Fe, Ni, Mn, Zn, Cu and Pb were determined. Sediment cores were also sampled in some stations of particular interest. The analytical results show that metals distribution does not show significant variations in relation to depth. Metal distribution in the Taranto gulf is mainly influenced by industrial wastes from Taranto town, by rivers of the Basilicata region and by prevailing anticlockwise marine currents. These factors cause an accumulation of metals in the sediments near to the coasts of Calabria. The statistical analysis, effected by HCA and PCA methods, can be considered a good starting point in order to classify sediment samples and to locate accumulation areas. Metal speciation shows that Fe, Ni and Zn are present in sediments mainly as sulphides, Mn is present principally in an ion-exchange form or bound to carbonate, while Cu and Pb are mainly present in the fraction bounds to humic acids.