Organocatalytic Enantioselective Synthesis of Bicyclo[2.2.2]octenones via Oxaziridinium Catalysed ortho-Hydroxylative Phenol Dearomatization.

Hydroxylative dearomatization reactions of phenols (HPD) offer an efficient way to assemble complex, biologically relevant scaffolds. Despite this, enantioselective hydroxylative phenol dearomatizations for the construction of bicyclo[2.2.2]octenones are classically limited to stoichiometric chiral reagents, and a practical, enantioselective catalytic method has remained elusive. Herein, we describe a highly enantioselective, organocatalytic tandem o-HPD-[4+2] reaction. Our methodology utilizes a chiral oxaziridinium organocatalyst, that is available in both enantiomeric forms, to afford dearomatized products in high enantioselectivity over a range of phenol substitution patterns. This approach was applied to the highly enantioselective synthesis of (+)-biscarvacrol (99 : 1 e.r.) and (-)-bis(2,6-xylenol) (94 : 6 e.r.). The practicality of our conditions was demonstrated at gram-scale, using an amine precatalyst, accessible in a single synthetic step.

Oxygen harvesting from carbon dioxide: simultaneous epoxidation and CO formation.

Due to increasing concentrations in the atmosphere, carbon dioxide has, in recent times, been targeted for utilisation (Carbon Capture Utilisation and Storage, CCUS). In particular, the production of CO from CO2 has been an area of intense interest, particularly since the CO can be utilized in Fischer-Tropsch synthesis. Herein we report that CO2 can also be used as a source of atomic oxygen that is efficiently harvested and used as a waste-free terminal oxidant for the oxidation of alkenes to epoxides. Simultaneously, the process yields CO. Utilization of the atomic oxygen does not only generate a valuable product, but also prevents the recombination of O and CO, thus increasing the yield of CO for possible application in the synthesis of higher-order hydrocarbons.

Selective Electrosynthetic Hydrocarboxylation of α,ß-Unsaturated Esters with Carbon Dioxide*.

The carboxylation of low-value commodity chemicals to provide higher-value carboxylic acids is of significant interest. Recently alternative routes to the traditional hydroformylation processes that used potentially toxic carbon monoxide and a transition metal catalyst have appeared. A significant challenge has been the selectivity observed for olefin carboxylation. Photochemical methods have shown a viable route towards the hydrocarboxylation of α,ß-unsaturated alkenes but rely on the use of an excess reducing or amine reagent. Herein we report our investigations of an electrochemical approach that is able to hydrocarboxylate α,ß-unsaturated alkenes with excellent regioselectivity and the ability to carboxylate hindered substrates to afford α-quaternary center carboxylic acids. The reported process requires no chromatography and the products are purified by simple crystallization from the reaction mixture after work-up.

Harnessing Applied Potential: Selective ß-Hydrocarboxylation of Substituted Olefins.

The construction of carboxylic acid compounds in a selective fashion from low value materials such as alkenes remains a long-standing challenge to synthetic chemists. In particular, ß-addition to styrenes is underdeveloped. Herein we report a new electrosynthetic approach to the selective hydrocarboxylation of alkenes that overcomes the limitations of current transition metal and photochemical approaches. The reported method allows unprecedented direct access to carboxylic acids derived from ß,ß-trisubstituted alkenes, in a highly regioselective manner.

Time-resolved luminescence detection of peroxynitrite using a reactivity-based lanthanide probe.

Peroxynitrite (ONOO-) is a powerful and short-lived oxidant formed in vivo, which can react with most biomolecules directly. To fully understand the roles of ONOO- in cell biology, improved methods for the selective detection and real-time analysis of ONOO- are needed. We present a water-soluble, luminescent europium(iii) probe for the rapid and sensitive detection of peroxynitrite in human serum, living cells and biological matrices. We have utilised the long luminescence lifetime of the probe to measure ONOO- in a time-resolved manner, effectively avoiding the influence of autofluorescence in biological samples. To demonstrate the utility of the Eu(iii) probe, we monitored the production of ONOO- in different cell lines, following treatment with a cold atmospheric plasma device commonly used in the clinic for skin wound treatment.

Selective α,δ-hydrocarboxylation of conjugated dienes utilizing CO2 and electrosynthesis.

To date the majority of diene carboxylation processes afford the α,δ-dicarboxylated product, the selective mono-carboxylation of dienes is a significant challenge and the major product reported under transition metal catalysis arises from carboxylation at the α-carbon. Herein we report a new electrosynthetic approach, that does not rely on a sacrificial electrode, the reported method allows unprecedented direct access to carboxylic acids derived from dienes at the δ-position. In addition, the α,δ-dicarboxylic acid or the α,δ-reduced alkene can be easily accessed by simple modification of the reaction conditions.

Coetaneous catalytic kinetic resolution of alkynes and azides through asymmetric triazole formation.

A non-enzymatic simultaneous (coined coetaneous) kinetic resolution of a racemic alkyne and racemic azide, utilising an asymmetric CuAAC reaction is reported. The use of a CuCl (R,R)-Ph-Pybox catalyst system effects a simultaneous kinetic resolution of two racemic starting materials to give one major triazolic diastereoisomer in the ratio 74:12:4:10 (dr 84:16, 90% ee maj). The corresponding control reaction using an achiral copper catalyst gives the four possible diastereoisomers in a 23:27:23:27 ratio, demonstrating minimal inherent substrate control.

Balancing Bulkiness in Gold(I) Phosphino-triazole Catalysis.

The syntheses of a series of 1-phenyl-5-phosphino 1,2,3-triazoles are disclosed, within which, the phosphorus atom (at the 5-position of a triazole) is appended by one, two or three triazole motifs, and the valency of the phosphorus(III) atom is completed by two, one or zero ancillary (phenyl or cyclohexyl) groups respectively. This series of phosphines was compared with tricyclohexylphosphine and triphenylphosphine to study the effect of increasing the number of triazoles appended to the central phosphorus atom from zero to three triazoles. Gold(I) chloride complexes of the synthesised ligands were prepared and analysed by techniques including single-crystal X-ray diffraction structure determination. Gold(I) complexes were also prepared from 1-(2,6-dimethoxy)-phenyl-5-dicyclohexyl-phosphino 1,2,3-triazole and 1-(2,6-dimethoxy)-phenyl-5-diphenyl-phosphino 1,2,3-triazole ligands. The crystal structures thus obtained were examined using the SambVca (2.0) web tool and percentage buried volumes determined. The effectiveness of these gold(I) chloride complexes to serve as precatalysts for alkyne hydration were assessed. Furthermore, the regioselectivity of hydration of but-1-yne-1,4-diyldibenzene was probed.

Phosphino-Triazole Ligands for Palladium-Catalyzed Cross-Coupling.

Twelve 1,5-disubtituted and fourteen 5-substituted 1,2,3-triazole derivatives bearing diaryl or dialkyl phosphines at the 5-position were synthesized and used as ligands for palladium-catalyzed Suzuki-Miyaura cross-coupling reactions. Bulky substrates were tested, and lead-like product formation was demonstrated. The online tool SambVca2.0 was used to assess steric parameters of ligands and preliminary buried volume determination using XRD-obtained data in a small number of cases proved to be informative. Two modeling approaches were compared for the determination of the buried volume of ligands where XRD data was not available. An approach with imposed steric restrictions was found to be superior in leading to buried volume determinations that closely correlate with observed reaction conversions. The online tool LLAMA was used to determine lead-likeness of potential Suzuki-Miyaura cross-coupling products, from which 10 of the most lead-like were successfully synthesized. Thus, confirming these readily accessible triazole-containing phosphines as highly suitable ligands for reaction screening and optimization in drug discovery campaigns.

Formal Total Synthesis of (+)-C9-Deoxyomuralide from l-Leucine Using a Double Sacrificial Chirality Transfer Approach.

Formal stereocontrolled syntheses of (±)- and (+)-C9-deoxyomuralide is reported, constituting one of the shortest routes to the full carbon skeleton reported to date.

The Bull-James assembly as a chiral auxiliary and shift reagent in kinetic resolution of alkyne amines by the CuAAC reaction.

The Bull-James boronic acid assembly is used simultaneously as a chiral auxiliary for kinetic resolution and as a chiral shift reagent for in situ enantiomeric excess (ee) determination by 1H NMR spectroscopy. Chiral terminal alkyne-containing amines, and their corresponding chiral triazoles formed via CuAAC, were probed in situ. Selectivity factors of up to s = 4 were imparted and measured, accurate to within ±3% when compared to chiral GC.

Relative reactivity of alkenyl alcohols in the palladium-catalyzed redox-relay Heck reaction.

The relative rates of alkenyl alcohols in the Pd-catalyzed redox-relay Heck reaction were measured in order to examine the effect of their steric and electronic properties on the rate-determining step. Competition experiments between an allylic alkenyl alcohol and two substrates with differing chain lengths revealed that the allylic alcohol reacts 3-4 times faster in either case. Competition between di- and trisubstituted alkenyl alcohols provided an interesting scenario, in which the disubstituted alkene was consumed first followed by reaction of the trisubstituted alkene. Consistent with this observation, the transition structures for the migratory insertion of the aryl group into the di- and trisubstituted alkenes were calculated with a lower barrier for the former. An internal competition between a substrate containing two alcohols with differing chain lengths demonstrated the catalyst's preference for migrating towards the closest alcohol. Additionally, it was observed that increasing the electron density in the arene boronic acid promotes a faster reaction, which correlates with Hammett σp values to give a ρ of -0.87.

Kinetic resolution of alkyne-substituted quaternary oxindoles via copper catalysed azide-alkyne cycloadditions.

The synthesis and kinetic resolution of quaternary oxindoles through copper catalysed azide-alkyne cycloadditions is presented. Selectivity factors (s) up to 22.1 ± 0.5 are reported. Enantioenriched alkynes and triazoles were obtained in ≥80% enantiomeric excess (e.e.).

Selective Formation of Trimethylene Carbonate (TMC): Atmospheric Pressure Carbon Dioxide Utilization.

Carbon dioxide utilisation (CDU) is currently gaining increased interest due to the abundance of CO2 and its possible application as a C1 building block. We herein report the first example of atmospheric pressure carbon dioxide incorporation into oxetane to selectively form trimethylene carbonate (TMC), which is a significant challenge as TMC is thermodynamically less favoured than its corresponding co-polymer.

Atropo- and Diastereoselective Construction of Tetracyclic Biphenylazepinium Salts Derived from Aminoalcohols: Use as Catalysts in Enantioselective Asymmetric Epoxidation.

A range of new biphenylazepinium salt organocatalysts effective for asymmetric epoxidation has been developed incorporating an additional substituted oxazolidine ring, and providing improved enantiocontrol in alkene epoxidation over the parent structure. Starting from enantiomerically pure aminoalcohols, tetracyclic iminium salts were obtained as single diastereoisomers through an atroposelective oxazolidine formation.

Virtues and limitations of Pittsburgh green for ozone detection.

A recently proposed 2',7'-dichlorofluorescein (DCF)-derived fluorescent probe for the detection of ozone shows good selectivity against a number of reactive oxygen species and good pH stability for biological and environmental applications. It is found, however, that over oxidation of the fluorescent product (Pittsburgh green) can occur. This could render quantitative measurements inaccurate due to a reduction in fluorescence and overlapping fluorescence signals from over oxidation by-products and it requires careful experimental design. Although difficult to assess by fluorescence measurements, the over oxidation can be conveniently monitored by (1)H NMR spectroscopy.

Kinetic resolution in asymmetric epoxidation using iminium salt catalysis.

The first reported examples of kinetic resolution in epoxidation reactions using iminium salt catalysis are described, providing up to 99% ee in the epoxidation of racemic cis-chromenes.

Observations on the modified Wenker synthesis of aziridines and the development of a biphasic system.

A cheap and reliable process for the modified Wenker cyclization to afford aziridines has been achieved using biphasic conditions for a range of amino alcohol starting materials. A 100 mmol "one-pot" process has also been devised, and the enantiopurity of the starting amino alcohol is retained in the aziridine product.

Asymmetric epoxidation using iminium salt organocatalysts featuring dynamically controlled atropoisomerism.

Introduction of a pseudoaxial substituent at a stereogenic center adjacent to the nitrogen atom in binaphthyl- and biphenyl-derived azepinium salt organocatalysts affords improved enantioselectivities and yields in the epoxidation of unfunctionalized alkenes. In the biphenyl-derived catalysts, the atropoisomerism at the biphenyl axis is controlled by the interaction of this substituent with the chiral substituent at nitrogen.