Asymmetric Benzotrithiophene-Based Hole Transporting Materials Provide High-Efficiency Perovskite Solar Cells.

In this study, we synthesized a series of small-molecule benzotrithiophenes (BTTs) and used them as hole transporting materials (HTMs) in perovskite solar cells (PSCs). The asymmetric benzo[2,1-b:-3,4-b':5,6-b″]trithiophene unit was used as the central core to which were appended various donor groups, namely, carbazole (BTT-CB), thieno thiophene (BTT-FT), triphenylamine (BTT-TPA), and bithiophene (BTT-TT). The extended aromatic core in the asymmetric BTT provided full planarity, thereby favoring intermolecular π-stacking and charge transport. The physical, optical, and electrical properties of these small-molecule HTMs are reported herein. BTT-TT displayed good crystallinity and superior hole mobility, when compared with those of the other three HTMs, and formed smooth and uniform surfaces when covering the perovskite active layer. Accordingly, among the devices prepared in this study, a PSC incorporating BTT-TT as the HTM achieved the highest power conversion efficiency (18.58%). Moreover, this BTT-TT-containing device exhibited good stability after storage for more than 700 h. Thus, asymmetric BTTs are promising candidate materials for use as small-molecule HTMs in PSCs.

Well-aligned Vertically Oriented ZnO Nanorod Arrays and their Application in Inverted Small Molecule Solar Cells.

This manuscript describes how to design and fabricate efficient inverted solar cells, which are based on a two-dimensional conjugated small molecule (SMPV1) and [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM), by utilizing ZnO nanorods (NRs) grown on a high quality Al-doped ZnO (AZO) seed layer. The inverted SMPV1:PC71BM solar cells with ZnO NRs that grew on both a sputtered and sol-gel processed AZO seed layer are fabricated. Compared with the AZO thin film prepared by the sol-gel method, the sputtered AZO thin film exhibits better crystallization and lower surface roughness, according to X-ray diffraction (XRD) and atomic force microscope (AFM) measurements. The orientation of the ZnO NRs grown on a sputtered AZO seed layer shows better vertical alignment, which is beneficial for the deposition of the subsequent active layer, forming better surface morphologies. Generally, the surface morphology of the active layer mainly dominates the fill factor (FF) of the devices. Consequently, the well-aligned ZnO NRs can be used to improve the carrier collection of the active layer and to increase the FF of the solar cells. Moreover, as an anti-reflection structure, it can also be utilized to enhance the light harvesting of the absorption layer, with the power conversion efficiency (PCE) of solar cells reaching 6.01%, higher than the sol-gel based solar cells with an efficiency of 4.74%.

Enhance the light-harvesting capability of the ITO-free inverted small molecule solar cell by ZnO nanorods.

The ITO-free inverted SMPV1:PC71BM solar cells with an Al doped ZnO (AZO) transparent electrodes are fabricated. The AZO thin film prepared by pulsed laser deposition (PLD) technique exhibits high transmission (>85%) and low sheet resistance (~30 Ω/sq) and the power conversion efficiency (PCE) of devices based on AZO electrode can reach around 4%. To further enhance the light harvesting of the absorption layer of solar cells, ZnO nanorods interlayer is grown on the AZO layer before the deposition the active layer. The absorption spectrums of devices under various conditions are also simulated by RCWA method to identify the optical saturation length of the ZnO nanorods. The PCE of ITO-free inverted small molecule solar cell improved with ZnO nanorods can reach 6.6%.