Polarization-based idler elimination: enhancing the efficiency of optical parametric amplification.

This study presents a novel way to increase the energy conversion efficiency of optical parametric amplification by eliminating the idler wave from the interaction using consecutive type-I and type-II amplification processes. By using the aforementioned straightforward approach the wavelength tunable narrow-bandwidth amplification with exceptionally high 40% peak pump-to-signal conversion efficiency and 68% peak pump depletion was achieved in the short-pulse regime, while preserving the beam quality factor of less than 1.4. The same optical layout can also serve as an enhanced idler amplification scheme.

Interferometric measurements of nonlinear refractive index in the infrared spectral range.

This study presents the development and application of interferometric technique for the measurement of nonlinear refractive index of optical materials, while directly accounting for experimentally determined laser pulse shape and beam profile. The method was employed in a systematic study of nonlinear refractive index on a series of common optical materials used in near and mid-IR spectral range, where experimental data on nonlinear material properties is still scarce. The values of nonlinear refractive index were determined at 1.03 µm, 2.2 µm, and 3.2 µm. The measurement results are compared to the values determined by previous studies (where available), and the influence of cascaded second-order nonlinearities is discussed.

Long seed, short pump: converting Yb-doped laser radiation to multi-µJ few-cycle pulses tunable through 2.5-15 µm.

We present a setup for generating broadband (up to 1050 cm-1) and broadly tunable (2.5-15 µm) mid-infrared pulses using an Yb-doped femtosecond laser as the pump source. Our scheme, comprising two parametric amplifiers and a mixing stage, exploits favorable group velocity matching conditions in GaSe pumped at 2 µm to directly produce sub-70 fs pulses throughout the tuning range without any additional dispersion compensation, while 30-50 fs pulse durations are achieved with simple dispersion compensation by propagation through thin bulk media. The generated pulses have sub-1% short- and long-term energy noise, as well as stable spectral parameters, while delivering 0.5-2 W average mid-IR power. We expect the source to be useful for various spectroscopic applications in the mid-IR.

53 W average power CEP-stabilized OPCPA system delivering 5.5 TW few cycle pulses at 1 kHz repetition rate.

We present a high peak and average power optical parametric chirped pulse amplification system driven by diode-pumped Yb:KGW and Nd:YAG lasers running at 1 kHz repetition rate. The advanced architecture of the system allows us to achieve >53 W average power combined with 5.5 TW peak power, along with sub-220 mrad CEP stability and sub-9 fs pulse duration at a center wavelength around 880 nm. Broadband, background-free, passively CEP stabilized seed pulses are produced in a series of cascaded optical parametric amplifiers pumped by the Yb:KGW laser, while a diode-pumped Nd:YAG laser system provides multi-mJ pump pulses for power amplification stages. Excellent stability of output parameters over 16 hours of continuous operation is demonstrated.

Table top TW-class OPCPA system driven by tandem femtosecond Yb:KGW and picosecond Nd:YAG lasers.

We present a compact TW-class OPCPA system operating at 800 nm. Broadband seed pulses are generated and pre-amplified to 25 µJ in a white light continuum seeded femtosecond NOPA. Amplification of the seed pulses to 35 mJ at a repetition rate of 10 Hz and compression to 9 fs is demonstrated.