Evaporation-Driven Energy Generation Using an Electrospun Polyacrylonitrile Nanofiber Mat with Different Support Substrates.

Water evaporation-driven energy harvesting is an emerging mechanism for contributing to green energy production with low cost. Herein, we developed polyacrylonitrile (PAN) nanofiber-based evaporation-driven electricity generators (PEEGs) to confirm the feasibility of utilizing electrospun PAN nanofiber mats in an evaporation-driven energy harvesting system. However, PAN nanofiber mats require a support substrate to enhance its durability and stability when it is applied to an evaporation-driven energy generator, which could have additional effects on generation performance. Accordingly, various support substrates, including fiberglass, copper, stainless mesh, and fabric screen, were applied to PEEGs and examined to understand their potential impacts on electrical generation outputs. As a result, the PAN nanofiber mats were successfully converted to a hydrophilic material for an evaporation-driven generator by dip-coating them in nanocarbon black (NCB) solution. Furthermore, specific electrokinetic performance trends were investigated and the peak electricity outputs of Voc were recorded to be 150.8, 6.5, 2.4, and 215.9 mV, and Isc outputs were recorded to be 143.8, 60.5, 103.8, and 121.4 µA, from PEEGs with fiberglass, copper, stainless mesh, and fabric screen substrates, respectively. Therefore, the implications of this study would provide further perspectives on the developing evaporation-induced electricity devices based on nanofiber materials.

Modeling pressure drop values across ultra-thin nanofiber filters with various ranges of filtration parameters under an aerodynamic slip effect.

Computational fluid dynamics simulations of fibrous filters with 56 combinations of different fiber sizes, packing densities, face velocities, and thicknesses were conducted for developing models that predict pressure drops across nanofiber filters. The accuracy of the simulation method was confirmed by comparing the numerical pressure drops to the experimental data obtained for polyacrylonitrile electrospun nanofiber filters. In the simulations, an aerodynamic slip effect around the surface of the small nanofibers was considered. The results showed that, unlike in the case of conventional filtration theory, pressure drops across the thin layers of electrospun nanofiber filters are not proportional to the thickness. This might be a critical factor for obtaining precise pressure drops across the electrospun nanofiber filters with extremely thin layers. Finally, we derived the product of drag coefficient and Reynolds number as a function of packing density, Knudsen number, and ratio of thickness to fiber diameter to get the correlation equation for pressure drop prediction. The obtained equation predicted the pressure drops across the nanofiber filters with the maximum relative difference of less than 15%.