Renal function-adapted D-dimer cutoffs in combination with a clinical prediction rule to exclude pulmonary embolism in patients presenting to the emergency department.

D-dimer levels significantly increase with declining renal function and hence, renal function-adjusted D-dimer cutoffs to rule out pulmonary embolism were suggested. Aim of this study was to "post hoc" validate previously defined renal function-adjusted D-dimer levels to safely rule out pulmonary embolism in patients presenting to the emergency department. In this retrospective, observational analysis, all patients with low to intermediate pre-test probability receiving D-dimer measurement and computed tomography angiography (CTA) to rule out pulmonary embolism between January 2017 and December 2020 were included. Previously defined renal function-adjusted D-dimer cutoffs (1306 µg/l for moderate and 1663 µg/l for severe renal function impairment) were applied to determine sensitivity, specificity, negative and positive predictive values. One thousand, three hundred sixty-nine patients were included of which 229 (17%) were diagnosed with pulmonary embolism. The estimated glomerular filtration rate (eGFR) was ≥ 60 ml/min in 1079 (79%), 30-59 ml/min in 266 (19%) and < 30 ml/min in 24 (2%) patients. Only three patients (1.1%) with an eGFR < 60 ml/min had a D-dimer level < 500 µg/l. There was a significant correlation between D-dimer and eGFR (R = - 0.159, p < 0.001). Calculated on the standard D-dimer cutoff value of 500 µg/l, sensitivity of D-dimer testing was 97% for patients with an eGFR ≥ 60 ml/min and 100% for those with 30-60 ml/min, while specificity decreased in patients with renal function impairment. A negative predictive value of 0.99 as a premise to safely rule out pulmonary embolism was achieved by applying a D-dimer cutoff of 1480 µg/l for eGFR 30-59 ml/min and 1351 µg/l for eGFR < 30 ml/min. The findings of this study underline that application of renal function-adapted D-dimer levels in combination with a clinical prediction rule appears feasible to rule out pulmonary embolism. Out of the current dataset, renal function-adjusted D-dimer cutoffs to rule out pulmonary embolism were slightly different compared to previously defined cutoffs. Further studies on a larger scale are needed to validate possible renal function-adjusted D-dimer cutoffs.

CADMUS: A Novel MRI-Based Classification of Spontaneous Intracerebral Hemorrhage Associated With Cerebral Small Vessel Disease

BACKGROUND AND OBJECTIVES: Cerebral small vessel disease (SVD) is the major cause of intracerebral hemorrhage (ICH). There is no comprehensive, easily applicable classification of ICH subtypes according to the presumed underlying SVD using MRI. We developed an MRI-based classification for SVD-related ICH. METHODS: We performed a retrospective study in the prospectively collected Swiss Stroke Registry (SSR, 2013-2019) and the Stroke InvestiGation in North And central London (SIGNAL) cohort. Patients with nontraumatic, SVD-related ICH and available MRI within 3 months were classified as Cerebral Amyloid angiopathy (CAA), Deep perforator arteriopathy (DPA), Mixed CAA-DPA, or Undetermined SVD using hemorrhagic and nonhemorrhagic MRI markers (CADMUS classification). The primary outcome was inter-rater reliability using Gwet's AC1. Secondary outcomes were recurrent ICH/ischemic stroke at 3 months according to the CADMUS phenotype. We performed Firth penalized logistic regressions and competing risk analyses. RESULTS: The SSR cohort included 1,180 patients (median age [interquartile range] 73 [62-80] years, baseline NIH Stroke Scale 6 [2-12], 45.6% lobar hematoma, systolic blood pressure on admission 166 [145-185] mm Hg). The CADMUS phenotypes were as follows: mixed CAA-DPA (n = 751 patients, 63.6%), undetermined SVD (n = 203, 17.2%), CAA (n = 154, 13.1%), and DPA (n = 72, 6.3%), with a similar distribution in the SIGNAL cohort (n = 313). Inter-rater reliability was good (Gwet's AC1 for SSR/SIGNAL 0.69/0.74). During follow-up, 56 patients had 57 events (28 ICH, 29 ischemic strokes). Three-month event rates were comparable between the CADMUS phenotypes. DISCUSSION: CADMUS, a novel MRI-based classification for SVD-associated ICH, is feasible and reproducible and may improve the classification of ICH subtypes in clinical practice and research.

Functional and Radiologic Outcomes of Degenerative Versus Traumatic Full-Thickness Rotator Cuff Tears Involving the Supraspinatus Tendon.

BACKGROUND: Arthroscopic rotator cuff repair (ARCR) is among the most commonly performed orthopaedic procedures. Several factors-including age, sex, and tear severity-have been identified as predictors for outcome after repair. The influence of the tear etiology on functional and structural outcome remains controversial. PURPOSE: To investigate the influence of tear etiology (degenerative vs traumatic) on functional and structural outcomes in patients with supraspinatus tendon tears. STUDY DESIGN: Cohort study; Level of evidence, 2. METHODS: Patients undergoing ARCR from 19 centers were prospectively enrolled between June 2020 and November 2021. Full-thickness, nonmassive tears involving the supraspinatus tendon were included. Tears were classified as degenerative (chronic shoulder pain, no history of trauma) or traumatic (acute, traumatic onset, no previous shoulder pain). Range of motion, strength, the Subjective Shoulder Value, the Oxford Shoulder Score (OSS), and the Constant-Murley Score (CMS) were assessed before (baseline) and 6 and 12 months after ARCR. The Subjective Shoulder Value and the OSS were also determined at the 24-month follow-up. Repair integrity after 12 months was documented, as well as additional surgeries up to the 24-month follow-up. Tear groups were compared using mixed models adjusted for potential confounding effects. RESULTS: From a cohort of 973 consecutive patients, 421 patients (degenerative tear, n = 230; traumatic tear, n = 191) met the inclusion criteria. The traumatic tear group had lower mean baseline OSS and CMS scores but significantly greater score changes 12 months after ARCR (OSS, 18 [SD, 8]; CMS, 34 [SD,18] vs degenerative: OSS, 15 [SD, 8]; CMS, 22 [SD, 15]) (P < .001) and significantly higher 12-month overall scores (OSS, 44 [SD, 5]; CMS, 79 [SD, 9] vs degenerative: OSS, 42 [SD, 7]; CMS, 76 [SD, 12]) (P≤ .006). At the 24-month follow-up, neither the OSS (degenerative, 44 [SD, 6]; traumatic, 45 [SD, 6]; P = .346) nor the rates of repair failure (degenerative, 14 [6.1%]; traumatic 12 [6.3%]; P = .934) and additional surgeries (7 [3%]; 7 [3.7%]; P = .723) differed between groups. CONCLUSION: Patients with degenerative and traumatic full-thickness supraspinatus tendon tears who had ARCR show satisfactory short-term functional results. Although patients with traumatic tears have lower baseline functional scores, they rehabilitate over time and show comparable clinical results 1 year after ARCR. Similarly, degenerative and traumatic rotator cuff tears show comparable structural outcomes, which suggests that degenerated tendons retain healing potential.

Prediction of surface area size in orbital floor and medial orbital wall fractures based on topographical subregions.

OBJECTIVE: This retrospective study evaluates the occurrence and frequency of different fracture patterns in a series of computed tomography (CT) scans in terms of the AOCMF Trauma Classification (TC) orbit module and correlates the assigned defects with measurements of the fracture area in order to get an approximate guideline for fracture size predictions on the basis of the classification. MATERIAL AND METHODS: CT scans of patients with orbital floor fractures were evaluated using the AOCMFTC to determine the topographical subregions. The coding consisted of: W = orbital wall, 1 = anterior orbit, 2 = midorbit, i = inferior, m = medial. The 3-dimensional surface area size of the fractures was quantified by the "defect body" method (Brainlab, Munich, Germany). The fracture area size and its confidence and prediction interval within each topographical subregion was estimated by regression analysis. RESULTS: A total of 137 CT scans exhibited 145 orbital floor fractures, which were combined with 34 medial orbital wall fractures in 31 patients. The floor fractures - W1(i)2(i) (n = 86) and W1(i) (n = 19) were the most frequent patterns. Combined floor and medial wall fractures most frequently corresponded to the pattern W1 (im)2 (im) (n = 15) ahead of W1 (im) 2(i) (n = 10). The surface area size ranged from 0.11 cm2 to 6.09 cm2 for orbital floor and from 0.29 cm2 to 5.43 cm2 for medial wall fractures. The prediction values of the mean fracture area size within the subregions were computed as follows: W1(i) = 2.25 cm2, W2(i) = 1.64 cm2, W1(i)2(i) = 3.10 cm2, W1(m) = 1.36 cm2, W2(m) = 1.65 cm2, W1(m)2(m) = 2.98 cm2, W1 (im) = 3.35 cm2, W1 (im) 2(i) = 4.63 cm2, W1 (im)2(m) = 4.06 cm2 and W1 (im)2 (im) = 7.16 cm2. CONCLUSION: The AOCMFTC orbital module offers a suitable framework for topographical allocation of fracture patterns inside the infero-medial orbital cavity. The involvement of the subregions is of predictive value providing estimations of the mean 3-D fracture area size.

Toothache as the initial symptom of plasma cell myeloma.

Patients with plasma cell myeloma may initially present to their dentists or dental surgeons with toothache, loose teeth, or gingival masses. An X-ray of the jaw can reveal osteolyses. In addition, accumulation of monoclonal light chains in AL-amyloidosis can lead to macroglossia. It is prudent that the dentist or dental surgeon recognizes the underlying disease and refers the patient to the oncologist or hematologist for further workup to prevent the complications of plasma cell myeloma such as renal impairment, fractures, bone pain, infections, hypercalcemia, anemia, or heart failure. Another area where the dentist or dental surgeon is involved with patients suffering from plasma cell myeloma is prevention and therapy of osteonecrosis of the jaw, occurring after administration of bisphosphonates or denosumab for osteolytic bone disease. The case report presented here shows a patient complaining of toothache for whom recognition of a systemic disease by the dentist led to the diagnosis of plasma cell myeloma, highlighting the need for interdisciplinary cooperation. As recent years have seen many changes in the management of patients with plasma cell myeloma, an update for dentists and dental surgeons is warranted.

Arthroscopic rotator cuff repair in the weight-bearing shoulder.

BACKGROUND: In wheelchair-dependent individuals, pain often develops because of rotator cuff tendon failure and/or osteoarthritis of the glenohumeral joint. The purposes of this study were to investigate (1) specific rotator cuff tear patterns, (2) structural healing, and (3) clinical outcomes after arthroscopic rotator cuff repair in a cohort of wheelchair-dependent patients. METHODS: Forty-six shoulders with a mean follow-up of 46 months (range, 24-82 months; SD, 13 months) from a consecutive series of 61 shoulders in 56 patients (46 men and 10 women) undergoing arthroscopic rotator cuff repair were available for analysis. Clinical outcome analysis was performed using the Constant-Murley score, the Subjective Shoulder Value, and the American Shoulder and Elbow Surgeons score. The integrity of the repair was analyzed by ultrasound. RESULTS: Of the shoulders, 87% had supraspinatus involvement, 70% had subscapularis involvement, and 57% had an anterosuperior lesion involving both the supraspinatus and subscapularis. Despite an overall structural failure rate of 33%, the patients showed improvements in the Constant-Murley score from 50 points (range, 22-86 points; SD, 16 points) preoperatively to 80 points (range, 40-98 points; SD, 12 points) postoperatively and in the American Shoulder and Elbow Surgeons score from 56 points (range, 20-92 points; SD, 20 points) preoperatively to 92 points (range, 53-100 points; SD, 10 points) postoperatively, with a mean postoperative Subjective Shoulder Value of 84% (range, 25%-100%; SD, 17%). CONCLUSION: Failure of the rotator cuff in weight-bearing shoulders occurs primarily anterosuperiorly. Arthroscopic rotator cuff repair leads to a structural failure rate of 33% but satisfactory functional results with high patient satisfaction at midterm follow-up.

A computer-based comparative quantitative analysis of surgical outcome of mandibular reconstructions with free fibula microvascular flaps.

The free fibula osteoseptocutaneous flap is the standard for reconstruction of extensive mandibular defects. The procedure must be precise to achieve the required functional and aesthetic results. The aim of the present study was to calculate retrospectively the exact differences in surgical outcome based on preoperative and postoperative Computed Tomography data sets. Ten patients with unilateral reconstructions of the mandible with a fibula based on conventional planning were analyzed quantitatively, applying mirroring techniques with direct comparison of the theoretically optimum with the actual reconstruction. The results showed that there is a significant discrepancy between what is actually achieved and the theoretical optimum. The result of the present retrospective analysis shows that there is room for further improvement of the outcome in complex mandible reconstruction cases.

The Comprehensive AOCMF Classification System: Mandible Fractures- Level 2 Tutorial.

This tutorial outlines the details of the AOCMF image-based classification system for fractures of the mandible at the precision level 2 allowing description of their topographical distribution. A short introduction about the anatomy is made. Mandibular fractures are classified by the anatomic regions involved. For this purpose, the mandible is delineated into an array of nine regions identified by letters: the symphysis/parasymphysis region anteriorly, two body regions on each lateral side, combined angle and ascending ramus regions, and finally the condylar and coronoid processes. A precise definition of the demarcation lines between these regions is given for the unambiguous allocation of fractures. Four transition zones allow an accurate topographic assignment if fractures end up in or run across the borders of anatomic regions. These zones are defined between angle/ramus and body, and between body and symphysis/parasymphysis. A fracture is classified as "confined" as long as it is located within a region, in contrast to a fracture being "nonconfined" when it extents to an adjoining region. Illustrations and case examples of mandible fractures are presented to become familiar with the classification procedure in daily routine.

The Comprehensive AOCMF Classification System: Midface Fractures - Level 2 Tutorial.

The AOCMF Classification Group developed a hierarchical three-level craniomaxillofacial classification system with increasing level of complexity and details. The highest level 1 system distinguish four major anatomical units including the mandible (code 91), midface (code 92), skull base (code 93), and cranial vault (code 94). This tutorial presents the level 2 system for the midface unit that concentrates on the location of the fractures within defined regions in the central (upper, intermediate, and lower) and lateral (zygoma, pterygoid) midface, as well as the internal orbit and palate. The level 2 midface fracture location outlines the topographic boundaries of the anatomical regions. The common nasoorbitoethmoidal and zygoma en bloc fracture patterns, as well as the time-honored Le Fort classification are taken into account. This tutorial is organized in a sequence of sections dealing with the description of the classification system with illustrations of the topographical cranial midface regions along with rules for fracture location and coding, a series of case examples with clinical imaging and a general discussion on the design of this classification. Individual fracture mapping in these regions regarding severity, fragmentation, displacement of the fragment or bone defect is addressed in a more detailed level 3 system in the subsequent articles.

The Comprehensive AOCMF Classification System: Mandible Fractures-Level 3 Tutorial.

This tutorial outlines the details of the AOCMF image-based classification system for fractures of the mandibular arch (i.e. the non-condylar mandible) at the precision level 3. It is the logical expansion of the fracture allocation to topographic mandibular sites outlined in level 2, and is based on three-dimensional (3D) imaging techniques/computed tomography (CT)/cone beam CT). Level 3 allows an anatomical description of the individual conditions of the mandibular arch such as the preinjury dental state and the degree of alveolar atrophy. Trauma sequelae are then addressed: (1) tooth injuries and periodontal trauma, (2) fracture involvement of the alveolar process, (3) the degree of fracture fragmentation in three categories (none, minor, and major), and (4) the presence of bone loss. The grading of fragmentation needs a 3D evaluation of the fracture area, allowing visualization of the outer and inner mandibular cortices. To document these fracture features beyond topography the alphanumeric codes are supplied with distinctive appendices. This level 3 tutorial is accompanied by a brief survey of the peculiarities of the edentulous atrophic mandible. Illustrations and a few case examples serve as instruction and reference to improve the understanding and application of the presented features.