Continuous wave interdigital H-mode cavities for alternating phase focusing heavy ion acceleration.

In the future, a new superconducting (SC) continuous wave (CW) high intensity heavy ion HElmholtz LInear ACcelerator (HELIAC) should provide ion beams with maximum beam energy above the Coulomb barrier for the Super Heavy Element program at GSI (Gesellschaft für Schwerionenforschung, in Engl.: Association for Heavy Ion Research). The HELIAC consists of a SC main accelerator supplied by a normal conducting injector, which comprises an electron cyclotron resonance ion source, a radio-frequency quadrupole, and two separate interdigital H-mode drift-tube linear accelerator cavities, based on an Alternating Phase Focusing (APF) scheme. Together, both cavities will accelerate ions from 300 to 1400 keV/u with only one external quadrupole triplet for transverse focusing in between. Due to the demanding requirements of the APF concept on the voltage distribution along the beam axis on the one hand and the CW operation on the other hand, the optimization of each cavity concerning RF, mechanical, and thermal properties is crucial for the successful operation of the HELIAC injector.

A dynamic collimation and alignment system for the Helmholtz linear accelerator.

The upcoming commissioning of the superconducting (SC) continuous wave Helmholtz linear accelerators first of series cryomodule is going to demand precise alignment of the four internal SC cavities and two SC solenoids. For optimal results, a beam-based alignment method is used to reduce the misalignment of the whole cryomodule, as well as its individual components. A symmetric beam of low transverse emittance is required for this method, which is to be formed by a collimation system. It consists of two separate plates with milled slits, aligned in the horizontal and vertical direction. The collimation system and alignment measurements are proposed, investigated, and realized. The complete setup of this system and its integration into the existing environment at the GSI High Charge State Injector are presented, as well as the results of the recent reference measurements.

High yield of podophyllotoxin from leaves of Podophyllum peltatum by in situ conversion of podophyllotoxin 4- O-beta-D-glucopyranoside.

Rehydration of powdered tissues of Podophyllum peltatum L. prior to extraction with an organic solvent allows endogenous beta-glucosidases to hydrolyze lignan 4-O-beta-D-glucosides in situ and increase the yield of podophyllotoxin. Aqueous extraction of rhizomes and leaves of P. peltatum yielded 4- to 10-fold greater quantities of podophyllotoxin than the traditional ethanolic extraction. Most significantly, leaves were shown to contain over 52 mg of podophyllotoxin per g of dry weight (5.2%), exceeding levels previously reported from any source. These results point to the use of leaves harvested from cultivated P. peltatum as an attractive alternative to the destructive collection of natural populations.

Antigiardial activity of isoflavones from Dalbergia frutescens bark.

Several isoflavones [formononetin (1), castanin (5), odoratin (6), glycitein (7), pseudobaptogenin (8), fujikinetin (9), and cuneatin (10)] were isolated from Dalbergia frutescens, and their antiprotozoal activities were determined against Giardia intestinalis. Among these compounds, formononetin (1) was the most potent antigiardial agent, with an IC(50) value of 30 ng/mL (approximately 0.1 microM), as compared to the value for metronidazole, the current drug of choice, of 100 ng/mL (approximately 0.6 microM). Three isoflavones closely related to formononetin [daidzein (2), biochanin A (3) and genistein (4)] were also evaluated, but they were at least 100 times less active than 1. Formononetin (1) may thus be an interesting lead for development of new antigiardial agents or as a probe for a new mechanistic target.

[An optical method for determining deformation and form changes in polyethylene surfaces of explanted acetabular cups of hip endoprostheses]. / Ein optisches Verfahren zur Bestimmung des Abriebs und der Gestaltsänderung der Polyethylenoberfläche explantierter Pfannen von Hüftendoprothesen.

AIM: Most methods used for the determination of volumetric wear of polyethylene cups are based on the assumption that the head of the prosthesis penetrates the cup in "cylindrical" fashion. The new accurate optical method is independent of this disputable assumption. METHOD: The articulating surface of the cup is scanned with light and a data set of 60,000 pixels obtained in this way is stored in a computer. Data obtained from used cups were compared with those obtained from unused cups. The volumetric wear was calculated directly by threefold integration. To assess the changes in surface shape, the data are fitted by an ellipsoid whose long axis defines the mean direction of load. A total of 18 retrieved and 3 unused cups of different types were studied. RESULTS: The unused acetabular cups deviated only slightly from ideal hemispheres. The surfaces showed rotational symmetry, and an undulation having an amplitude of 0.1 mm between dome and equator. For all explanted cups, the assumption of cylindrical penetration of the head into the polyethylene was shown not to represent the true situation. The cup expands in all directions, and the volumetric wear is underestimated by 50% with the traditional methods. The data suggest that long-term survival may be jeopardized when the main direction of loading is centered on the dome of the cup. Ceramic heads were associated with smaller rates of volumetric wear. CONCLUSION: The new optical method is characterised by short measuring times, precision and simple application. Analysis of the wear patterns of polyethylene components using this technique may contribute to a further understanding of the complex mechanisms of aseptic loosening.

In vitro propagation of Podophyllum peltatum.

The lignan podophyllotoxin, occurring in Podophyllum emodi Wall, ex Royale and Podophyllum peltatum. L., is the starting compound for the semi-synthesis of the anticancer drugs etoposide and teniposide. In this study, we evaluate development of an in vitro propagation protocol to rapidly produce high yielding Podophyllum peltatum plants. Rhizome tips were inoculated on MS medium supplied with 4.4 microM N(6)-benzyladenine and 0.025% (w/v) activated charcoal. These explants formed terminal buds, similar to the ones found in nature. These buds were sources of in vitro bud cultures. These bud cultures were classified as: apical, axillary, and adventitious and the effects of various N(6)-benzyladenine concentrations on the three types of bud cultures were evaluated through bud, leaf, and root inductions. Cultures of axillary and adventitious buds were more proliferous for bud induction. Podophyllotoxin contents of in vitro rooted bud and plantlet cultures were similar to the content found in the wild. Plantlets and buds were acclimatized under controlled environment conditions.

Evaluation of four Narcissus cultivars as potential sources for galanthamine production.

Galanthamine, an alkaloid present in the Amaryllidaceae is currently undergoing clinical trials for the treatment of Alzheimer's. Common daffodils, Narcissus spp., contain galanthamine and other alkaloids. Four commercial Narcissus cultivars were evaluated as potential sources of galanthamine. Planting depths, planting densities, bulb size or flower bud removal did not affect galanthamine content.

Alkaloid content of different bulb parts of Narcissus cv. Ice Follies.

Bulbs of Narcissus were dissected into outer and inner scales, leaves, basal plate, flower, and bulbils to determine the distribution of alkaloids among different tissues. Quantitation of galanthamine as well as the other alkaloids was accomplished by capillary gas chromatography.