A method for the quantitative analysis of polar anionic pesticides in milk/infant formula, cereals and fruit and vegetables using ion chromatography coupled to tandem mass spectrometry.

Polar pesticides such as anionic or ionisable compounds have always provided a challenge for analytical chemists. Methods of analysis have been developed using a range of techniques including normal phase chromatography, ion-pairing, derivatisation and HILIC or multi-mode chromatography. These work well with some of these compounds but, except for HILIC, all of them have their limitations and none of them cover the range required by legislation. Some of these compounds, glyphosate, chlorate and phosphonic acid, are found regularly in a range of food matrices, and therefore reliable methods of analysis are essential. This study describes an ion chromatography method with tandem mass spectrometry detection which not only covers the full range of compounds required by legislation but also can be expanded to include other anionic or ionisable pesticides and metabolites. These include glyphosate and its metabolites, glufosinate and its metabolites, ethephon and its metabolites as well as fosetyl aluminium, chlorate and perchlorate. The method is fully validated according to the performance criteria from the SANTE guidelines for the analysis of pesticides in food and feed over a wide range of matrices, including milk, infant formula, cereals and fruits and vegetables. Over 300 food samples have analysed as part of our routine monitoring program.

Improved Isolation Procedures for Okadaic Acid Group Toxins from Shellfish (Mytilus edulis) and Microalgae (Prorocentrum lima).

Okadaic acid (OA) group toxins may accumulate in shellfish and can result in diarrhetic shellfish poisoning when consumed by humans, and are therefore regulated. Purified toxins are required for the production of certified reference materials used to accurately quantitate toxin levels in shellfish and water samples, and for other research purposes. An improved procedure was developed for the isolation of dinophysistoxin-2 (DTX2) from shellfish (M. edulis), reducing the number of purification steps from eight to five, thereby increasing recoveries to ~68%, compared to ~40% in a previously reported method, and a purity of >95%. Cell densities and toxin production were monitored in cultures of Prorocentrum lima, that produced OA, DTX1, and their esters, over ~1.5 years with maximum cell densities of ~70,000 cells mL-1 observed. Toxin accumulation progressively increased over the study period, to ~0.7 and 2.1 mg L-1 of OA and DTX1 (including their esters), respectively, providing information on appropriate harvesting times. A procedure for the purification of OA and DTX1 from the harvested biomass was developed employing four purification steps, with recoveries of ~76% and purities of >95% being achieved. Purities were confirmed by LC-HRMS, LC-UV, and NMR spectroscopy. Additional stability observations led to a better understanding of the chemistry of these toxins.

Effects of Temperature, Growth Media, and Photoperiod on Growth and Toxin Production of Azadinium spinosum.

Azaspiracids (AZAs) are microalgal toxins that can accumulate in shellfish and lead to human intoxications. To facilitate their study and subsequent biomonitoring, purification from microalgae rather than shellfish is preferable; however, challenges remain with respect to maximizing toxin yields. The impacts of temperature, growth media, and photoperiod on cell densities and toxin production in Azadinium spinosum were investigated. Final cell densities were similar at 10 and 18 °C, while toxin cell quotas were higher (~3.5-fold) at 10 °C. A comparison of culture media showed higher cell densities and AZA cell quotas (2.5-5-fold) in f10k compared to f/2 and L1 media. Photoperiod also showed differences, with lower cell densities in the 8:16 L:D treatment, while toxin cell quotas were similar for 12:12 and 8:16 L:D treatments but slightly lower for the 16:8 L:D treatment. AZA1, -2 and -33 were detected during the exponential phase, while some known and new AZAs were only detected once the stationary phase was reached. These compounds were additionally detected in field water samples during an AZA event.

Results of a Saxitoxin Proficiency Test Including Characterization of Reference Material and Stability Studies.

A saxitoxin (STX) proficiency test (PT) was organized as part of the Establishment of Quality Assurance for the Detection of Biological Toxins of Potential Bioterrorism Risk (EQuATox) project. The aim of this PT was to provide an evaluation of existing methods and the European laboratories' capabilities for the analysis of STX and some of its analogues in real samples. Homogenized mussel material and algal cell materials containing paralytic shellfish poisoning (PSP) toxins were produced as reference sample matrices. The reference material was characterized using various analytical methods. Acidified algal extract samples at two concentration levels were prepared from a bulk culture of PSP toxins producing dinoflagellate Alexandrium ostenfeldii. The homogeneity and stability of the prepared PT samples were studied and found to be fit-for-purpose. Thereafter, eight STX PT samples were sent to ten participating laboratories from eight countries. The PT offered the participating laboratories the possibility to assess their performance regarding the qualitative and quantitative detection of PSP toxins. Various techniques such as official Association of Official Analytical Chemists (AOAC) methods, immunoassays, and liquid chromatography-mass spectrometry were used for sample analyses.

Optimization of Sample Preparation for the Identification and Quantification of Saxitoxin in Proficiency Test Mussel Sample using Liquid Chromatography-Tandem Mass Spectrometry.

Saxitoxin (STX) and some selected paralytic shellfish poisoning (PSP) analogues in mussel samples were identified and quantified with liquid chromatography-tandem mass spectrometry (LC-MS/MS). Sample extraction and purification methods of mussel sample were optimized for LC-MS/MS analysis. The developed method was applied to the analysis of the homogenized mussel samples in the proficiency test (PT) within the EQuATox project (Establishment of Quality Assurance for the Detection of Biological Toxins of Potential Bioterrorism Risk). Ten laboratories from eight countries participated in the STX PT. Identification of PSP toxins in naturally contaminated mussel samples was performed by comparison of product ion spectra and retention times with those of reference standards. The quantitative results were obtained with LC-MS/MS by spiking reference standards in toxic mussel extracts. The results were within the z-score of ±1 when compared to the results measured with the official AOAC (Association of Official Analytical Chemists) method 2005.06, pre-column oxidation high-performance liquid chromatography with fluorescence detection (HPLC-FLD).

Heat treatment and the use of additives to improve the stability of paralytic shellfish poisoning toxins in shellfish tissue reference materials for internal quality control and proficiency testing.

The need for homogenous reference materials stable for paralytic shellfish toxins is vital for the monitoring and quality assurance of these potent neurotoxins in shellfish. Two stabilisation techniques were investigated, heat treatment through autoclaving and the addition of preserving additives into the tissue matrix. Short and long-term stability experiments as well as homogeneity determination were conducted on materials prepared by both techniques in comparison with an untreated control using two LC-FLD methods. Both techniques improved the stability of the matrix and the PSP toxins present compared to the controls. A material was prepared using the combined techniques of heat treatment followed by spiking with additives and data is presented from this optimised reference material as used over a two year period in the Irish national monitoring program and in a development exercise as part of a proficiency testing scheme operated by QUASIMEME (Quality Assurance of Information for Marine Environmental Monitoring in Europe) since 2011. The results were indicative of the long-term stability of the material as evidenced through consistent assigned values in the case of the proficiency testing scheme and a low relative standard deviation of 10.5% for total toxicity data generated over 24 months.

Novel application of high pressure processing for the production of shellfish toxin matrix reference materials.

The production of homogeneous and stable matrix reference materials for marine biotoxins is important for the validation and implementation of instrumental methods of analysis. High pressure processing was investigated to ascertain potential advantages this technique may have in stabilising paralytic shellfish poisoning toxins in shellfish tissues compared to untreated materials. Oyster tissues were subjected to a range of different temperatures and pressures, with results showing a significant reduction in biological activity in comparison to control samples, without significantly altering toxin profiles. Tissue subjected to pressures >600 MPa at 50 °C was assessed for homogeneity and stability. The sample homogeneity was determined using a pre-column oxidation LC-FLD method and shown to be within accepted levels of within batch repeatability. Short and long-term stability studies were conducted over a range of temperatures, with analysis by pre and post column oxidation LC-FLD demonstrating improved stability of toxins compared to the untreated materials and with epimerisation of toxins also notably reduced in treated materials. This study confirmed the technique of high pressure processing to improve the stability of PSP toxins compared to untreated wet tissues and highlighted its applicability in reference material preparation where removal of biological activity is of importance.

A feasibility study into the production of a freeze-dried oyster reference material for paralytic shellfish poisoning toxins.

Matrix reference materials are an essential component for the validation and quality control of analytical methodologies for the quantitation of marine biotoxins in shellfish. Given the potential advantages of reference materials in powder form, a study was conducted to assess the feasibility for the production of a freeze-dried oyster tissue reference material containing a range of important paralytic shellfish poisoning toxins. One bulk sample of a wet oyster tissue homogenate was generated following mass culturing of toxic Alexandrium and oyster feeding experiments. The bulk tissue was used to prepare untreated wet frozen aliquots with the remainder being freeze-dried and processed into appropriately-sized powder samples. A pre-column oxidation LC-FLD analysis was used to confirm the absence of any chromatographic artefacts resulting from the processing and to confirm acceptable homogeneity of the tissues. Excellent stability over both the short-term (1 month) and long-term (1 year) of the freeze-dried material was demonstrated as compared with the stability of the untreated wet tissue. A post-column oxidation LC-FLD method was used to confirm the absence of toxin epimerisation in freeze-dried tissues which were observed in the wet tissues. Overall the work showed the feasibility of an approach to produce a homogenous freeze-dried oyster matrix material with enhanced stability in comparison to the untreated wet tissue. The potential for use of the process for preparation of large scale production batches of a freeze-dried CRM for paralytic shellfish poisoning toxins has therefore been demonstrated.

Effect of addition of antibiotics and an antioxidant on the stability of tissue reference materials for domoic acid, the amnesic shellfish poison.

Five separate reference materials (RMs) were prepared from a mussel (Mytilus edulis) tissue containing domoic acid (DA) from scallop hepatopancreas (Pecten maximus). Homogenates were separately spiked with antibiotics, an antioxidant, or a combination of both. Control materials did not contain any additives and were prepared from lightly cooked and autoclaved mussel tissues. Stability studies were run over a 148-day period at three different temperature conditions: -20 degrees C, +4 degrees C and +40 degrees C. DA contents in all materials were characterised by HPLC-UV. Homogeneities were demonstrated at the beginning of the study, with coefficients of variance of less than 4% (n = 9). DA was stable at -20 degrees C in all materials. The control materials showed significant degradation after two days at +40 degrees C, and after eight days at +4 degrees C. Each of the materials containing additives demonstrated better stability during the initial period of the study. In addition there was no significant degradation in any of the materials with additives stored at +4 degrees C over the duration of the study. The material containing a combination of the antibiotics and the antioxidant displayed the best stability of all the materials. There was no significant reduction in DA concentration at all temperature conditions after eight days, and after 32 days the decrease at +40 degrees C was still <20 %. Following this, a DA laboratory reference material (LRM) was prepared and, based on previous results, spiked with both the antioxidant and antibiotics. A short-term stability study on this material gave similar results to the corresponding material in the additives study. This study shows that combined use of the additives investigated in the preparation of a mussel tissue reference material for DA ensures analyte stability for a period of up to eight days at temperatures of up to +40 degrees C, a condition that is particularly important when shipping test materials globally. Aliquots of individual feasibility materials used in the study.