Alkyl decorated metal-organic frameworks for selective trapping of ethane from ethylene above ambient pressures.

The trapping of paraffins is beneficial compared to selective olefin adsorption for adsorptive olefin purification from a process engineering point of view. Here we demonstrate the use of a series of Zn2(X-bdc)2(dabco) (where X-bdc2- is bdc2- = 1,4-benzenedicarboxylate with substituting groups X, DM-bdc2- = 2,5-dimethyl-1,4-benzenedicarboxylate or TM-bdc2- = 2,3,5,6-tetramethyl-1,4-benzenedicarboxylate and dabco = diazabicyclo[2.2.2.]octane) metal-organic frameworks (MOFs) for the adsorptive removal of ethane from ethylene streams. The best performing material from this series is Zn2(TM-bdc)2(dabco) (DMOF-TM), which shows a high ethane uptake of 5.31 mmol g-1 at 110 kPa, with a good IAST selectivity of 1.88 towards ethane over ethylene. Through breakthrough measurements a high productivity of 13.1 L kg-1 per breakthrough is revealed with good reproducibility over five consecutive cycles. Molecular simulations show that the methyl groups of DMOF-TM are forming a van der Waals trap with the methylene groups from dabco, snuggly fitting the ethane. Further, rarely used high pressure coadsorption measurements, in pressure regimes that most scientific studies on hydrocarbon separation on MOFs ignore, reveal an increase in ethane capacity and selectivity for binary mixtures with increased pressures. The coadsorption measurements reveal good selectivity of 1.96 at 1000 kPa, which is verified also through IAST calculations up to 3000 kPa. This study overall showcases the opportunities that pore engineering by alkyl group incorporation and pressure increase offer to improve hydrocarbon separation in reticular materials.

In situ visualization of loading-dependent water effects in a stable metal-organic framework.

Competitive water adsorption can have a significant impact on metal-organic framework performance properties, ranging from occupying active sites in catalytic reactions to co-adsorbing at the most favourable adsorption sites in gas separation and storage applications. In this study, we investigate, for a metal-organic framework that is stable after moisture exposure, what are the reversible, loading-dependent structural changes that occur during water adsorption. Herein, a combination of in situ synchrotron powder and single-crystal diffraction, infrared spectroscopy and molecular modelling analysis was used to understand the important role of loading-dependent water effects in a water stable metal-organic framework. Through this analysis, insights into changes in crystallographic lattice parameters, water siting information and water-induced defect structure as a response to water loading were obtained. This work shows that, even in stable metal-organic frameworks that maintain their porosity and crystallinity after moisture exposure, important molecular-level structural changes can still occur during water adsorption due to guest-host interactions such as water-induced bond rearrangements.

Tuning Thermal Expansion in Metal-Organic Frameworks Using a Mixed Linker Solid Solution Approach.

Several metal-organic frameworks are known to display negative thermal expansion (NTE). However, unlike traditional NTE material classes, there have been no reports where the thermal expansion of a MOF has been tuned continuously from negative to positive through the formation of single-phase solid solutions. In the system Zn-DMOF-TMx, Zn2[(bdc)2-2x(TM-bdabco)2x][dabco], the introduction of increasing amounts of TM-bdc, with four methyl groups decorating the benzene dicarboxylate linker, leads to a smooth transition from negative to positive thermal expansion in the a-b plane of this tetragonal material. The temperature at which zero thermal expansion occurs evolves from ∼186 K for the Zn-DMOF parent structure (x = 0) to ∼325 K for Zn-DMOF-TM (x = 1.0). The formation of mixed linker solid solutions is likely a general strategy for the control of thermal expansion in MOFs.

Discovery of Polyoxo-Noble-Metalate-Based Metal-Organic Frameworks.

Here we report on the synthesis, structure, and characterization of the first example of a polyoxopalladate (POP)-based metal-organic framework (MOF). This novel class of materials comprises discrete polyoxo-13-palladate(II) nanocubes [Pd13O8(AsO4)8H6]8- decorated by four Ba2+ ions on each of two opposite faces. These secondary building units (SBUs) are linked to each other via rigid linear organic groups, resulting in a stable 3D POP-MOF framework, which exhibits interesting sorption as well as catalytic properties.

Elucidating the Variable-Temperature Mechanical Properties of a Negative Thermal Expansion Metal-Organic Framework.

We report the first experimental study into the thermomechanical and viscoelastic properties of a metal-organic framework (MOF) material. Nanoindentations show a decrease in the Young's modulus, consistent with classical molecular dynamics simulations, and hardness of HKUST-1 with increasing temperature over the 25-100 °C range. Variable-temperature dynamic mechanical analysis reveals significant creep behavior, with a reduction of 56% and 88% of the hardness over 10 min at 25 and 100 °C, respectively. This result suggests that, despite the increased density that results from increasing temperature in the negative thermal expansion MOF, the thermally induced softening due to vibrational and entropic contributions plays a more dominant role in dictating the material's temperature-dependent mechanical behavior.

Mechanical Properties in Metal-Organic Frameworks: Emerging Opportunities and Challenges for Device Functionality and Technological Applications.

Some of the most remarkable recent developments in metal-organic framework (MOF) performance properties can only be rationalized by the mechanical properties endowed by their hybrid inorganic-organic nanoporous structures. While these characteristics create intriguing application prospects, the same attributes also present challenges that will need to be overcome to enable the integration of MOFs with technologies where these promising traits can be exploited. In this review, emerging opportunities and challenges are identified for MOF-enabled device functionality and technological applications that arise from their fascinating mechanical properties. This is discussed not only in the context of their more well-studied gas storage and separation applications, but also for instances where MOFs serve as components of functional nanodevices. Recent advances in understanding MOF mechanical structure-property relationships due to attributes such as defects and interpenetration are highlighted, and open questions related to state-of-the-art computational approaches for quantifying their mechanical properties are critically discussed.

Correction: An updated roadmap for the integration of metal-organic frameworks with electronic devices and chemical sensors.

Correction for 'An updated roadmap for the integration of metal-organic frameworks with electronic devices and chemical sensors' by Ivo Stassen et al., Chem. Soc. Rev., 2017, DOI: 10.1039/c7cs00122c.

Flexible Force Field Parameterization through Fitting on the Ab Initio-Derived Elastic Tensor.

Constructing functional forms and their corresponding force field parameters for the metal-linker interface of metal-organic frameworks is challenging. We propose fitting these parameters on the elastic tensor, computed from ab initio density functional theory calculations. The advantage of this top-down approach is that it becomes evident if functional forms are missing when components of the elastic tensor are off. As a proof-of-concept, a new flexible force field for MIL-47(V) is derived. Negative thermal expansion is observed and framework flexibility has a negligible effect on adsorption and transport properties for small guest molecules. We believe that this force field parametrization approach can serve as a useful tool for developing accurate flexible force field models that capture the correct mechanical behavior of the full periodic structure.

Predicting Multicomponent Adsorption Isotherms in Open-Metal Site Materials Using Force Field Calculations Based on Energy Decomposed Density Functional Theory.

For the design of adsorptive-separation units, knowledge is required of the multicomponent adsorption behavior. Ideal adsorbed solution theory (IAST) breaks down for olefin adsorption in open-metal site (OMS) materials due to non-ideal donor-acceptor interactions. Using a density-function-theory-based energy decomposition scheme, we develop a physically justifiable classical force field that incorporates the missing orbital interactions using an appropriate functional form. Our first-principles derived force field shows greatly improved quantitative agreement with the inflection points, initial uptake, saturation capacity, and enthalpies of adsorption obtained from our in-house adsorption experiments. While IAST fails to make accurate predictions, our improved force field model is able to correctly predict the multicomponent behavior. Our approach is also transferable to other OMS structures, allowing the accurate study of their separation performances for olefins/paraffins and further mixtures involving complex donor-acceptor interactions.

Modulating adsorption and stability properties in pillared metal-organic frameworks: a model system for understanding ligand effects.

Metal-organic frameworks (MOFs) are nanoporous materials with highly tunable properties that make them ideal for a wide array of adsorption applications. Through careful choice of metal and ligand precursors, one can target the specific functionality and pore characteristics desired for the application of interest. However, among the wide array of MOFs reported in the literature, there are varying trends in the effects that ligand identity has on the adsorption, chemical stability, and intrinsic framework dynamics of the material. This is largely due to ligand effects being strongly coupled with structural properties arising from the differing topologies among frameworks. Given the important role such properties play in dictating adsorbent performance, understanding these effects will be critical for the design of next generation functional materials. Pillared MOFs are ideal platforms for understanding how ligand properties can affect the adsorption, stability, and framework dynamics in MOFs. In this Account, we highlight our recent work demonstrating how experiment and simulation can be used to understand the important role ligand identity plays in governing the properties of isostructural MOFs containing interconnected layers pillared by bridging ligands. Changing the identity of the linear, ditopic ligand in either the 2-D layer or the pillaring third dimension allows targeted modulation of the chemical functionality, porosity, and interpenetration of the framework. We will discuss how these characteristics can have important consequences on the adsorption, chemical stability, and dynamic properties of pillared MOFs. The structures discussed in this Account comprise the greatest diversity of isostructural MOFs whose stability properties have been studied, allowing valuable insight into how ligand properties dictate the chemical stability of isostructural frameworks. We also discuss how functional groups can affect adsorbate energetics at their most favorable adsorption sites to elucidate how functional groups can affect the adsorptive performance of these materials in ways that are unexpected based on the isolated ligand's properties. We then highlight a variety of simulation tools that not only can be used to understand the differing molecular-level behavior of the adsorbate and framework dynamics within these isostructural MOFs, but also can shed light on possible mechanisms that govern the differing chemical stability properties among these materials. Lastly, we provide perspective on the challenges and opportunities for utilizing the structure-property relationships arising from the ligand effects described in this Account for the design of further MOFs with enhanced chemical stability and adsorption properties.

Understanding DABCO Nanorotor Dynamics in Isostructural Metal-Organic Frameworks.

Flexible framework dynamics present in the subset of metal-organic frameworks known as soft porous crystals give rise to interesting structural properties that are unique to this class of materials. In this work, we use experiments and molecular simulation to understand the highly dynamic nanorotor behavior of the 1,4-diazabicyclo[2.2.2]octane (DABCO) ligand in the pillared Zn-DMOF and Zn-DMOF-TM (TM = tetramethyl) structures. While DABCO is known to be displaced in the presence of water in the parent Zn-DMOF structure, the Zn-DMOF-TM variation is highly stable even after adsorbing significant amounts of water vapor. The dynamics of DABCO in the presence of water guest molecules is therefore also explored in the Zn-DMOF-TM structure via in situ NMR and IR experiments. This analysis shows that the rotational motion of the DABCO linkers is dependent on water content, but not a likely source of water instability because the dynamics are fast and largely unaffected by the presence of methyl functional groups.

Synthesis of cobalt-, nickel-, copper-, and zinc-based, water-stable, pillared metal-organic frameworks.

The performance of metal-organic frameworks (MOFs) in humid or aqueous environments is a topic of great significance for a variety of applications ranging from adsorption separations to gas storage. While a number of water-stable MOFs have emerged recently in the literature, the majority of MOFs are known to have poor water stability compared to zeolites and activated carbons, and there is therefore a critical need to perform systematic water-stability studies and characterize MOFs comprehensively after water exposure. Using these studies we can isolate the specific factors governing the structural stability of MOFs and direct the future synthesis efforts toward the construction of new, water-stable MOFs. In this work, we have extended our previous work on the systematic water-stability studies of MOFs and synthesized new, cobalt-, nickel-, copper-, and zinc-based, water-stable, pillared MOFs by incorporating structural factors such as ligand sterics and catenation into the framework. Stability is assessed by using water vapor adsorption isotherms along with powder X-ray diffraction patterns and results from BET modeling of N2 adsorption isotherms before and after water exposure. As expected, our study demonstrates that unlike the parent DMOF structures (based on Co, Ni, Cu, and Zn metals), which all collapse under 60% relative humidity (RH), their corresponding tetramethyl-functionalized variations (DMOF-TM) are remarkably stable, even when adsorbing more than 20 mmol of H2O/g of MOF at 80% RH. This behavior is due to steric factors provided by the methyl groups grafted on the BDC (benzenedicarboxylic acid) ligand, as shown previously for the Zn-based DMOF-TM. Moreover, 4,4',4″,4‴-benzene-1,2,4,5-tetrayltetrabenzoic acid based, pillared MOFs (based on Co and Zn metals) are also found to be stable after 90% RH exposure, even when the basicity of the bipyridyl-based pillar ligand is low. This is due to the presence of catenation in their frameworks, similar to MOF-508 (Zn-BDC-BPY), which has also been reported to be stable after exposure to 90% RH.

Molecular-level insight into unusual low pressure CO2 affinity in pillared metal-organic frameworks.

Fundamental insight into how low pressure adsorption properties are affected by chemical functionalization is critical to the development of next-generation porous materials for postcombustion CO2 capture. In this work, we present a systematic approach to understanding low pressure CO2 affinity in isostructural metal-organic frameworks (MOFs) using molecular simulations and apply it to obtain quantitative, molecular-level insight into interesting experimental low pressure adsorption trends in a series of pillared MOFs. Our experimental results show that increasing the number of nonpolar functional groups on the benzene dicarboxylate (BDC) linker in the pillared DMOF-1 [Zn2(BDC)2(DABCO)] structure is an effective way to tune the CO2 Henry's coefficient in this isostructural series. These findings are contrary to the common scenario where polar functional groups induce the greatest increase in low pressure affinity through polarization of the CO2 molecule. Instead, MOFs in this isostructural series containing nitro, hydroxyl, fluorine, chlorine, and bromine functional groups result in little increase to the low pressure CO2 affinity. Strong agreement between simulated and experimental Henry's coefficient values is obtained from simulations on representative structures, and a powerful yet simple approach involving the analysis of the simulated heats of adsorption, adsorbate density distributions, and minimum energy 0 K binding sites is presented to elucidate the intermolecular interactions governing these interesting trends. Through a combined experimental and simulation approach, we demonstrate how subtle, structure-specific differences in CO2 affinity induced by functionalization can be understood at the molecular-level through classical simulations. This work also illustrates how structure-property relationships resulting from chemical functionalization can be very specific to the topology and electrostatic environment in the structure of interest. Given the excellent agreement between experiments and simulation, predicted CO2 selectivities over N2, CH4, and CO are also investigated to demonstrate that methyl groups also provide the greatest increase in CO2 selectivity relative to the other functional groups. These results indicate that methyl ligand functionalization may be a promising approach for creating both water stable and CO2 selective variations of other MOFs for various industrial applications.

Kinetic water stability of an isostructural family of zinc-based pillared metal-organic frameworks.

The rational design of metal-organic frameworks (MOFs) with structural stability in the presence of humid conditions is critical to the commercialization of this class of materials. However, the systematic water stability studies required to develop design criteria for the construction of water-stable MOFs are still scarce. In this work, we show that by varying the functional groups on the 1,4-benzenedicarboxylic acid (BDC) linker of DMOF [Zn(BDC)(DABCO)(0.5)], we can systematically tune the kinetic water stability of this isostructural, pillared family of MOFs. To illustrate this concept, we have performed water adsorption studies on four novel, methyl-functionalized DMOF variations along with a number of already reported functionalized analogues containing polar (fluorine) and nonpolar (methyl) functional groups on the BDC ligand. These results are distinctly different from previous reports where the apparent water stability is improved through the inclusion of functional groups such as -CH(3), -C(2)H(5), and -CF(3) which only serve to prevent significant amounts of water from adsorbing into the pores. In this study, we present the first demonstration of tuning the inherent kinetic stability of MOF structures in the presence of large amounts of adsorbed water. Notably, we demonstrate that while the parent DMOF structure is unstable, the DMOF variation containing the tetramethyl BDC ligand remains fully stable after adsorbing large amounts of water vapor during cyclic water adsorption cycles. These trends cannot be rationalized in terms of hydrophobicity alone; experimental water isotherms show that MOFs containing the same number of methyl groups per unit cell will have different kinetic stabilities and that the precise placements of the methyl groups on the BDC ligand are therefore critically important in determining their stability in the presence of water. We present the water adsorption isotherms, PXRD (powder X-ray diffraction) patterns, and BET surface areas before and after water exposure to illustrate these trends. Furthermore, we shed light on the important distinction between kinetic and thermodynamic stability in MOFs. Molecular simulations are also used to provide insight into the structural characteristics governing these trends in kinetic water stability.