Impact of pulsed electric fields on Corynebacterium glutamicum cell membrane permeabilization.

The permeability barrier of the microbial cell envelope for substrates and products often causes very low reaction rates of whole cells. Therefore, it is of interest to develop an effective method to reduce this permeability barrier in order to increase product yields. Utilisation of pulse electric fields may improve amino acid release from Corynebacterium glutamicum by up to several orders of magnitude. In particular pulsed electric fields may change the cell/membrane's dielectric properties and induce the release of intracellular metabolites. In this study the parameters for successful electropermeabilization were determined and the viabilities of treated cells were examined. We also found that pulse treated cells not only maintained their viabilities but also their ability to reproduce, post-pulse treatment. Since electropermeabilized cells could maintain both their viabilities and ability to reproduce, we believe that this preliminary data may contribute to the optimization of fermentative production of amino acids and bioprocess enhancement through electropermeabilization and may be beneficial to industrial bioprocesses.

Fed batch bioconversion of 2-propanol by a solvent tolerant strain of Alcaligenes faecalis entrapped in Ca-alginate gel.

A gram-negative, rod-shaped, aerobe, capable of converting 2-propanol (isopropanol, IPA) to acetone was isolated from an oil/sump, and identified by 16 S rDNA analysis as Alcaligenes faecalis. Investigations showed this strain to be extremely solvent-tolerant and it was subsequently named ST1. In this study, A. faecalis ST1 cells were immobilized by entrapment in Ca-alginate beads (3 mm in diameter), and used in the bioconversion of high concentration IPA. The biodegradation rates and the corresponding microbial growth inside the beads were measured at four different IPA concentration ranges from 2 to 15 g l(-1). The maximum cell concentration obtained was 9.59 g dry cell weight (DCW) l(-1) medium which equated to 66 g DCW l(-1) gel, at an initial IPA concentration of 15 g l(-1) after 216 h of incubation. A maximum biodegradation rate of 0.067 g IPA g cells(-1) h(-1) was achieved for 5 g l(-1) IPA where an increase in IPA concentration to 38 g l(-1) caused reduction in bead integrity. A modified growth medium was developed which allowed repeated use of the beads for more than 42 days without any loss of integrity and continued bioconversion activity.

Bioconversion of isopropanol by a solvent tolerant Sphingobacterium mizutae strain.

The bioconversion of high concentration isopropanol (2-propanol, IPA) was investigated by a solvent tolerant strain of bacteria, which was identified as Sphingobacterium mizutae ST2 by partial 16S rDNA gene sequencing. This strain of bacteria exhibited the ability to utilise high concentration isopropanol as the sole carbon source, with mineralization occurring via an acetone intermediate into central metabolism. The biodegradative performance of this strain for IPA was examined over a 2-38 g l(-1) concentration range, using specific growth rate (mu) and conversion rate analysis. Maximum specific growth rates (mu(max)) of 0.0045 h(-1 )were routinely obtainable on IPA. In addition, the highest specific IPA degradation rate was obtained at a concentration of 7.5 g l(-1) with a corresponding value of 0.045 g IPA g cells(-1) h(-1). While the highest acetone yield reached its maximum value of 0.940 g acetone g IPA(-1) at 7.5 g IPA l(-1). This is the first report on bioconversion of isopropanol at such high concentration by this solvent tolerant strain of S. mizutae and may allow its application in novel biocatalytic processes for effective biological conversion in two-phase solvent systems.

Enhancement of biomolecule transport by electroporation: a review of theory and practical application to transformation of Corynebacterium glutamicum.

Selective and reversible permeabilization of the cell wall permeability barrier is the focus for many biotechnological applications. In this article, the basic principles for reversible membrane permeabilization, based on biological, chemical, and physical methods are reviewed. Emphasis is given to electroporation (electropermeabilization) which tends to be the most popular method for membrane permeabilization and for introduction of foreign molecules into the cells. The applications of this method in industrial processes as well as the critical factors and parameters which affect the success of this approach are discussed. The different strategies developed throughout the years for increased transformation efficiencies of the industrially important amino acid-overproducing bacterium Corynebacterium glutamicum, are also summarized.

Biodegradation of high-concentration isopropanol by a solvent-tolerant thermophile, Bacillus pallidus.

The aerobic biodegradation of high-concentration, to 24 g l(-1), 2-propanol (IPA) by a thermophilic isolate ST3, identified as Bacillus pallidus, was successfully carried out for the first time. This solvent-tolerant B. pallidus utilized IPA as the sole carbon source within a minimal salts medium. Cultivation was carried out in 100-ml shake flasks at 60 degrees C and compared with cultivation within a 1-l stirred tank reactor (STR). Specific growth rate (micro) was about 0.2 h(-1) for both systems, with a maximum cell density of 2.4 x 10(8) cells ml(-1) obtained with STR cultivation. During exponential growth and stationary phase, IPA biodegradation rates were found to be 0.14 and 0.02 g l(-1) h(-1), respectively, in shake-flask experiments, whereas corresponding values of 0.09 and 0.018 g l(-1) h(-1) were achievable in the STR. Generation of acetone, the major intermediate in aerobic IPA biodegradation, was also monitored as an indicator of microbial IPA utilization. Acetone levels reached a maximum of 2.2-2.3 g l(-1) after 72 and 58 h for 100-ml and 1-l systems, respectively. Both IPA and acetone were completely removed from the medium following 160 and 175 h, respectively, during STR growth, although this was not demonstrated within shake-flask reactions. Growth of B. pallidus on acetone or IPA alone demonstrated that the maximum growth rate ( micro ) obtainable was 0.247 h(-1) at 4 g l(-1) acetone and 0.202 h(-1) at 8 g l(-1) IPA within shake-flask cultivation. These results indicate the potential of the solvent-tolerant thermophile B. pallidus ST3 in the bioremediation of hot solvent-containing industrial waste streams.

Kinetic analysis of high-concentration isopropanol biodegradation by a solvent-tolerant mixed microbial culture.

The ability of a previously enriched microbial population to utilize isopropanol (IPA) as the sole carbon source within a minimal salts medium is studied. The advantage of prior enrichment procedures for the improvement of IPA biodegradation performance is demonstrated for an IPA concentration of up to 24 g L(-1). Results showing the interrelationship between temperature and substrate utilization and inhibition levels at temperatures of between 2 degrees C and 45 degrees C are examined. Models of inhibition based on enzyme kinetics are assessed via nonlinear analysis, in order to accurately represent the growth kinetics of this solvent-tolerant mixed culture. The model that best describes the data is the Levenspiel substrate inhibition model, which can predict the maximum substrate level above which growth is completely limited. This is the first report of IPA treatment of up to 24 g L(-1) by an aerobic solvent-tolerant population.