Insight into CMC-PVA-fHNTs Nanocomposite Hydrogel as an Advance Carrier for Cefadroxil Monohydrate: Fabrication and Characterization/Angiogenic Potential Analysis.

Controlled drug delivery is a key strategy aimed at reducing both the frequency of therapeutic dosages and potential systemic side effects, particularly in the case of high drug concentrations. The nanocomposite hydrogel systems presented in this study were synthesized by combining carboxymethyl cellulose, polyvinyl alcohol, and (3-aminopropyl)triethoxysilane-functionalized halloysite nanotubes (fHNTs). This hydrogel system is a potential candidate for the controlled release of cefadroxil monohydrate. These hydrogels are analyzed by Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, and rheological measurements. Additionally, swelling properties, porosity, hydrophilicity, drug release, and in vitro and in vivo analyses were also evaluated. The observed trends in swelling and drug release demonstrated that the outcomes are dependent on the presence of fHNTs in the hydrogel matrix. Notably, fHNTs-loaded hydrogels displayed sustained drug release patterns. This innovative approach eliminates the need for traditional encapsulation and presents promising and translatable strategies for achieving more effective drug release.

Synthesis of Mono Ethylene Glycol (MEG)-Based Polyurethane and Effect of Chain Extender on Its Associated Properties.

This study depicts the investigations of the effect of composition of aromatic polyester polyol produced from terephthalic acid (TPA) and different concentrations of mono ethylene glycol (mEG) as a chain extender on the mechanical properties of polyurethane (PU) elastomer. Aromatic polyester polyols are prepared via the poly-esterification of adipic acid, terephthalic acid, catalyst, and mono ethylene glycol; while a polyurethane elastomer is formulated via the pre-polymerization of polyol with pure monomeric Methylene diphenyl diisocyanate (MDI.) Mechanical properties of polyurethane elastomers are examined, such as hardness via shore A hardness, apparent density via ASTM (American Society for Testing and Materials) D1622-08, and abrasion wear resistance via a Deutches Institut fur Normung (DIN) abrasion wear resistance tester. Structural properties are investigated through Fourier-transform infrared spectroscopy (FTIR) analysis. Results reveal that the shore A hardness of the PU elastomer increases with an increasing concentration of mEG from 4g to 12g. Nevertheless, the elastomer's density depicts a reduction with an increasing extender content. The abrasion wear resistance of polyurethane, however, increases with an increasing concentration of glycol. A structural analysis through FTIR confirms the formation of polyurethane elastomer through the characteristic peaks demonstrated.

Designing of biocompatible and biodegradable chitosan based crosslinked hydrogel for in vitro release of encapsulated povidone-iodine: A clinical translation.

Controlled drug delivery is a prime stratagem for minimizing both the frequency of therapeutic administration as well as systematic side effects with high drug content. One of the extensively studied approaches for controlling medicament delivery is the encapsulation of drug within polymer chains which sluggish the release on the basis of its crosslinked network. Recent advances in biomedical field have led to the fabrication of chitosan (CS) based biocompatible and biodegradable hydrogels for controlled delivery of encapsulated drug. In this study, CS-PVP based hydrogels are fabricated by varying the concentration of 3-glycidyloxypropyl trimethoxysilane (GPTMS) via solution casting technique. Swelling indices of prepared hydrogel samples were determined in different media including distilled water, different pH and electrolyte solutions. FTIR, TGA and WAXRD are conducted to evaluate the structural, thermal and crystalline properties of prepared hydrogels, respectively. Porosity (71%), hydrophilicity (55°) and mechanical properties (97.56 MPa of UTS and 85.23% E%) were investigated for the fabricated samples. Extensively in vitro biodegradation, antimicrobial performance and cytotoxicity were evaluated for these hydrogels. The drug release analysis was carried out to examine the release response of encapsulated iodopovidone at physiological conditions. These results tender a strategy for the design of structural hydrogel with different crosslinking mechanism like physical and covalent interactions. These insights obviate the demand for encapsulation and offer promising and translatable strategies for more effective release of drugs.

Inflammation targeted chitosan-based hydrogel for controlled release of diclofenac sodium.

Inflammation is a key challenge in the treatment of chronic diseases. Spurred by topical advancement in polymer chemistry and drug delivery, hydrogels that release a drug in temporal, spatial and dosage controlled fashion have been trendy. This research focused on the fabrication of hydrogels with controlled drug release properties to control inflammation. Chitosan and polyvinyl pyrrolidone were used as base polymers and crosslinked with epichlorohydrin to form hydrogel films by solution casting technique. Prepared hydrogels were analyzed by swelling analysis in deionized water, buffer and electrolyte solutions and gel fraction. Functional groups confirmation and development of new covalent and hydrogen bonds, thermal stability (28.49%) and crystallinity were evaluated by FTIR, TGA and WAXRD, respectively. Rheological properties including gel strength and yield stress, elasticity (2309 MPa), porosity (75%) and hydrophilicity (73°) of prepared hydrogels were also evaluated. In vitro studies confirmed that prepared hydrogels have good biodegradability, excellent antimicrobial property and admirable cytotoxicity. Drug release profile (87.56% in 130 min) along with the drug encapsulation efficiency (84%) of prepared hydrogels was also studied. These results paved the path towards the development of hydrogels that can release the drugs with desired temporal patterns.

Cellulaose acetate based thin film nanocomposite reverse osmosis membrane incorporated with TiO2 nanoparticles for improved performance.

In this work, cellulose acetate (CA) based thin film nanocomposite reverse osmosis (RO) membranes were fabricated using dissolution casting method by optimizing the CA/polyethylene glycol (CA/PEG-400) ratios for improved RO performance. The selectivity of optimized membrane was further enhanced by incorporating TiO2 (0-25 wt.%) nanoparticles. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analyzer (TGA), scanning electron microscopy (SEM) and X-ray diffraction (XRD) were conducted to characterize control and modified membranes for the analysis of functional groups, thermal properties, morphology and structural investigation respectively. CP-2 of CA/PEG-400 (80/20) was selected for further modification with TiO2 nanoparticles. The maximum salt rejection (95.4%) was observed for the membrane having 15% TiO2 nanoparticles. Further escalation of TiO2 concentration resulted in the agglomeration of nanoparticles which subsequently decreased the permeation flux. The test results demonstrated that the modified membranes had higher salt rejection and chlorine resistance, lower degradation profile, successful inhibition of Escherichia coli growth and facilitating permeation flux compared to the control membrane.