Solid-State Synthesis of Na4Fe3(PO4)2P2O7/C by Ti-Doping with Promoted Structural Reversibility for Long-Cycling Sodium-Ion Batteries.

The cathode material Na4Fe3(PO4)2P2O7 (NFPP) has shown great potential for sodium-ion batteries (SIBs) due to its cost-effectiveness, prolonged cycle life, and high theoretical capacity. However, the practical large-scale production of NFPP is hindered by its poor intrinsic electron conductivity and the presence of a NaFePO4 impurity. In this study, we propose a mutually reinforcing approach involving Ti doping, mechanical nano treatment, and in situ carbon coating to produce Ti-NFPP via the solid-state methods of synthesis. Ti doping strengthens the covalent Fe-O interaction, hence accelerating the electron transfer and the redox reactions Fe2+/Fe3+. In situ carbon coating improves electrical conductivity and allows for accommodating the volumetric variation. Nanosized treatment promotes the uniform progression of solid-state reactions. The synthesized Na4Fe2.98Ti0.01(PO4)2P2O7 material (Ti-NFPP) exhibits promising electrochemical properties with an initial discharge specific capacity of 112.5 mA h g-1 at 0.1 C. A volumetric change of only 2.98% was observed during the de/sodiation process, indicating an enhanced reversibility of the crystal lattice. Moreover, it demonstrates exceptional cycling stability with a capacity retention rate of 97.2 mA h g-1 at 10 C over 5000 cycles. These findings offer a promising pathway for the large-scale production of Ti-NFPP in SIBs.

NaGaPO4F - a KTiOPO4-structured solid sodium-ion conductor.

Advanced ionic conductors are crucial for a large variety of contemporary technologies spanning solid state ion batteries, fuel cells, gas sensors, water desalination, etc. In this work, we report on a new member of KTiOPO4-structured materials, NaGaPO4F, with sodium-ion conductivity. NaGaPO4F has been obtained for the first time via a facile two-step synthesis consisting of a hydrothermal preparation of an ammonia-based precursor, NH4GaPO4F, followed by an ion exchange reaction with NaNO3. Its crystal structure was precisely refined using a combination of synchrotron X-ray powder diffraction and electron diffraction tomography. The material is thermally stable upon 450 °C showing no significant structural transformations or degradation but only a ∼1% cell volume expansion. Na-ion mobility in NaGaPO4F was investigated by a joint experimental and computational approach comprising solid-state nuclear magnetic resonance (NMR) and density functional theory (DFT). DFT and bond-valence site energy (BVSE) calculations reveal 3D diffusion of sodium in the [GaPO4F] framework with migration barriers amounting to 0.22 and 0.44 eV, respectively, while NMR yields 0.3-0.5 eV that, being coupled with a calculated bandgap of ∼4.25 eV, makes NaGaPO4F a promising fast Na-ion conductor.

Lithium isotope tracing in silicon-based electrodes using solid-state MAS NMR: a powerful comprehensive tool for the characterization of lithium batteries.

The introduction of lithiated components with different 7Li/6Li isotopic ratios, also called isotopic tracing, can give access to better understanding of lithium transport and lithiation processes in lithium-ion batteries. In this work, we propose a simple methodology based on high-resolution solid-state NMR for the determination of the 7Li/6Li ratio in silicon electrodes following different strategies of isotopic tracing. The 6Li and 7Li MAS NMR experiments allow obtaining resolved spectra whose spectral components can be assigned to different moieties of the materials. In order to measure the ratio of the 6Li/7Li NMR integrals, a silicon electrode with a natural 7Li/6Li isotope abundance was used as a reference. This calibration can then be used to determine the 7Li/6Li ratio of any similar samples. This method was applied to study the phenomena occurring at the interface between a silicon electrode and a labeled electrolyte, which is an essential step for isotopic tracing experiments in systems after the formation of the solid electrolyte interphase (SEI). Beyond the isotopic exchanges between the SEI and the electrolyte already observed in the literature, our results show that isotopic exchanges also involve Li-Si alloys in the electrode bulk. Within a 52-hour contact, the electrolyte labeling disappeared: isotopic concentrations of the electrolyte and electrode become practically homogenized. However, at the electrode level, different silicides are characterized by rather different isotopic enrichment. In the present work, ToF SIMS and liquid state NMR were also used to cross-check and discuss the solid-state NMR method we have proposed.

(De)Lithiation and Strain Mechanism in Crystalline Ge Nanoparticles.

Germanium is a promising active material for high energy density anodes in Li-ion batteries thanks to its good Li-ion conduction and mechanical properties. However, a deep understanding of the (de)lithiation mechanism of Ge requires advanced characterizations to correlate structural and chemical evolution during charge and discharge. Here we report a combined operando X-ray diffraction (XRD) and ex situ 7Li solid-state NMR investigation performed on crystalline germanium nanoparticles (c-Ge Nps) based anodes during partial and complete cycling at C/10 versus Li metal. High-resolution XRD data, acquired along three successive partial cycles, revealed the formation process of crystalline core-amorphous shell particles and their associated strain behavior, demonstrating the reversibility of the c-Ge lattice strain, unlike what is observed in the crystalline silicon nanoparticles. Moreover, the crystalline and amorphous lithiated phases formed during a complete lithiation cycle are identified. Amorphous Li7Ge3 and Li7Ge2 are formed successively, followed by the appearance of crystalline Li15Ge4 (c-Li15Ge4) at the end of lithiation. These results highlight the enhanced mechanical properties of germanium compared to silicon, which can mitigate pulverization and increase structural stability, in the perspective for developing high-performance anodes.

Coexistence of three types of sodium motion in double molybdate Na9Sc(MoO4)6: 23Na and 45Sc NMR data and ab initio calculations.

The rechargeable Na-ion batteries attract much attention as an alternative to the widely used but expensive Li-ion batteries. The search for materials with high sodium diffusion is important for the development of solid state electrolytes. We present the results of experimental and ab initio studies of the Na-ion diffusion mechanism in Na9Sc(MoO4)6. The ion conductivity reaches the value of 3.6 × 10-2 S cm-1 at T ∼ 850 K. The 23Na and 45Sc NMR data reveal the coexistence of three different types of Na-ion motion in the temperature range from 300 to 750 K. They are activated at different temperatures and are characterized by substantially different dynamics parameters. These features are confirmed by ab initio calculations of activation barriers for sodium diffusion along various paths.