A comprehensive approach for the recycling of anode materials from spent lithium-ion batteries: Separation, lithium recovery, and graphite reutilization as environmental catalyst.

The effective recovery of valuables from anodes coming from spent lithium-ion batteries (LIBs) is of great importance to ensure resource supply and reduce the environmental burden for recycling. In this work, a simple and low energy consumption roasting method was proposed by employing low-temperature eutectic NaOH-KOH as reaction medium, in order to simultaneously separate graphite from Cu foils, extract lithium from it and set it up for reuse as environmental catalyst through one-step water washing process. Our results show that polyvinylidene difluoride (PVDF) was effectively deactivated due to dehydrofluorination/carbonization at a relatively low temperature and short time (150 °C, 20 min) when a mass ratio of 1:1 for eutectic NaOH-KOH to spent LIBs anodes was used, yielding 97.3 % of graphite detached. Moreover, a remarkable lithium extraction efficiency of 93.2 % was simultaneously obtained. Afterwards, the reusability of the recycled graphite was tested by employing it as a catalyst for the treatment of a contaminant organic dye (Rhodamine B) in the presence of NaClO. Our results show that a superior NaClO activation was obtained with the addition of recycled graphite, being this fact closely associated to the abundant active sites formed during the long-term charging/discharging cycles in the original battery. The alkaline-mediated roasting process presented in this work presents an energy-saving scheme to efficiently recover useful components from spent anodes, whereas the reusability example highlighted a useful option for repurposing the severely damaged graphite as an environmental catalyst rather than disposing it in landfills, turning waste into a valuable material.

Waste-Based Ceramsite for the Efficient Removal of Ciprofloxacin in Aqueous Solutions.

Ciprofloxacin (CIP), a compound with bioaccumulation toxicity and antibiotic resistance, is frequently detected in water at alarming concentrations, which is becoming an increasing concern. In this study, a low-cost ceramsite was developed from industrial solid wastes through sintering to remove CIP from wastewater. The effects of adsorbent dosage, initial pH, contact time, initial CIP concentration, and temperature were explored. More than 99% of CIP (20-60 mg/L) was removed at around pH 2-4 by the ceramsite. The kinetic data fitted well with the pseudo-second-order model, revealing that chemisorption was the main rate-determining step. The isotherm data was better described by the Freundlich model, suggesting that CIP was removed by the formation of multiple layers on the heterogeneous surface. Moreover, the removal efficiency was practically higher than 95% during five regeneration cycles, when different regeneration methods were used, including calcination, HCl, and NaOH washing, indicating that the ceramsite exhibited outstanding reusability in removing CIP. The primary mechanism of CIP removal by the ceramsite was found to be the synergism of adsorption and flocculation, both of which depended on the release of Ca2+ from the ceramsite. In addition, strong Ca-CIP complexes could be formed through surface complexation and metal cation bridging between Ca2+ and different functional groups in CIP.

Highly Efficient Cd2+ Removal Using Tobermorite with pH Self-Adjustment Ability from Aqueous Solution.

Cadmium (Cd), as a type of heavy metal, can increase the incidence of many diseases, even in low concentrations. In this study, tobermorite was hydrothermally synthesized and then applied to adsorb Cd2+ from an aqueous solution. The physicochemical characteristics of the synthesized tobermorite were detected, and the results indicated that the well-crystallized tobermorite had a lot of mesopores and a large specific surface area of 140.92 m2/g. It acquired a pH self-adjustment ability via spontaneously releasing Ca2+ and OH- into the aqueous solution. The effects of different factors on Cd2+ removal were investigated. For Cd2+, the removal efficiency could reach 99.71% and the maximum adsorption capacity was 39.18 mg/g using tobermorite. The adsorption data was best fitted with the pseudo-second-order kinetic and Langmuir isotherm models. In addition, there was no strict limit on the solution pH in Cd2+ adsorption because the tobermorite could adjust the solution pH to an alkaline atmosphere spontaneously. The efficient removal of Cd2+ using tobermorite was a result of surface complexation and ion exchange.