The association between diverse serum folate with MAFLD and liver fibrosis based on NHANES 2017-2020.

Background: Metabolically Associated Fatty Liver Disease (MAFLD) marks a progression from the previous paradigm of Non-Alcoholic Fatty Liver Disease (NAFLD), presenting a redefined diagnostic framework that accentuates metabolic factors while recognizing non-alcoholic contributors. In our investigation, our principal aim was to scrutinize the conceivable correlation between diverse serum folate levels and the prevalence of MAFLD and liver fibrosis. Methods: In our investigation, we conducted an extensive analysis utilizing data derived from the National Health and Nutrition Examination Survey (NHANES) across the years 2017-2020. We aimed to investigate the association between different serum folate concentrations and the prevalence of MAFLD and liver fibrosis by comprehensive multivariate analysis. This analytical approach considered various variables, encompassing sociodemographic characteristics, lifestyle factors, hypertension, and diabetes. By including these potential confounders in our analysis, we aimed to ensure the stability of the findings regarding the association between different serum folate concentrations and the development of MAFLD and liver fibrosis. Results: In our investigation, we utilized multiple linear regression models to thoroughly analyze the data, revealing noteworthy insights. Evidently, elevated levels of both total folate and 5-MTHF exhibited a distinct negative correlation with CAP, while 5-MTHF demonstrated a notable negative correlation with LSM. Furthermore, multiple logistic regression models were employed for an in-depth examination of the data. As the concentrations of total folate and 5-MTHF in the serum increased, a substantial decrease in the likelihood of MAFLD and liver fibrosis occurrence was observed. Conclusion: The findings of this investigation robustly suggest the prevalence of MAFLD and liver fibrosis decreased significantly with the increase of serum concentrations of total folate and 5-MTHF.

The effect of synbiotics in patients with NAFLD: a systematic review and meta-analysis.

Background: Nonalcoholic fatty liver disease (NAFLD) is the highest incidence of chronic liver disease worldwide, seriously endangering human health, and its pathogenesis is still unclear. In the recent years, increasing evidence has shown that intestinal flora plays an important role in the occurrence and development of NAFLD. Synbiotics can alter gut microbiota and may be a treatment option for NAFLD in the future. Objectives: To systematically investigate the therapeutic effect of synbiotic supplementation on NAFLD patients. Design: A systematic review and meta-analysis were conducted. Data sources and methods: We conducted a search on four databases (PubMed, Embase, Cochrane Library, and Web of Science) to identify relevant studies. Eligible studies were then screened, and data from the included studies were extracted, combined, and analyzed. Result: This study analyzed 10 randomized controlled trials involving 634 patients with NAFLD. The results showed that synbiotic supplementation could significantly reduce the level of alanine aminotransferase (mean difference (MD) = -8.80; (95% CI [-13.06, -4.53]), p < 0.0001), aspartate aminotransferase (MD = -9.48; 95% CI [-12.54, -6.43], p < 0.0001), and γ-glutamyl transferase (MD = -12.55; 95% CI [-19.40, -5.69], p = 0.0003) in NAFLD patients. In the field of metabolism, synbiotic supplementation could significantly reduce the level of total cholesterol (MD = -11.93; 95% CI [-20.43, -3.42], p = 0.006) and low-density lipoprotein cholesterol (MD = -16.2; 95% CI [-19.79, -12.60], p < 0.0001) and increase the level of high-density lipoprotein cholesterol (MD = 1.56; 95% CI [0.43, 2.68], p = 0.007) in NAFLD patients. In addition, synbiotic supplementation could significantly reduce liver stiffness measurement indicator (MD = -1.09; 95% CI [-1.87, -0.30], p = 0.006) and controlled attenuation parameter indicator (MD = -37.04; 95% CI [-56.78, -17.30], p = 0.0002) in NAFLD patients. Conclusion: Based on the current evidence, synbiotic supplementation can improve liver function, adjust lipid metabolism, and reduce the degree of liver fibrosis in patients with NAFLD, but these effects need to be confirmed by further studies.

Paving Behavior in Ants and Its Potential Application in Monitoring Two Urban Pest Ants, Solenopsis invicta and Tapinoma melanocephalum.

Our previous study discovered that two urban pest ants, red imported fire ants, Solenopsis invicta Buren (Formicidae: Myrmicinae), and ghost ants, Tapinoma melanocephalum (Fabricius) (Formicidae: Dolichoderinae), can pave viscose surfaces with particles to facilitate food search and transport. We hypothesize that this paving behavior can be applied to monitor S. invicta and T. melanocephalum. In the present study, 3998 adhesive tapes, each with a food source (sausage), were placed in 20 locations around Guangzhou, China (181-224 tapes per location), and their efficiency to detect S. invicta and T. melanocephalum was compared with two traditional ant-monitoring methods, baiting and pitfall trapping. Overall, S. invicta was detected by 45.6% and 46.4% of baits and adhesive tapes, respectively. In each location, the percentage of adhesive tapes detecting S. invicta and T. melanocephalum was similar when compared to baits and pitfall traps. However, significantly more non-target ant species showed up on bait and pitfall traps. Seven non-target ant species-Pheidole parva Mayr (Formicidae: Myrmicinae), Pheidole nodus Smith (Formicidae: Myrmicinae), Pheidole sinica Wu & Wang (Formicidae: Myrmicinae), Pheidole yeensis Forel (Formicidae: Myrmicinae), Carebara affinis (Jerdon) (Formicidae: Myrmicinae), Camponotus nicobarensis Mayr (Formicidae: Formicinae), and Odontoponera transversa (Smith) (Formicidae: Ponerinae)-also showed tape paving behavior, but they can be easily distinguished morphologically from S. invicta and T. melanocephalum. Our study showed that the paving behavior occurs in different subfamilies of ants (i.e., myrmicinae, dolichoderinae, formicinae, and ponerinae). In addition, paving behavior can potentially be used to develop more specific monitoring methods for S. invicta and T. melanocephalum in urban areas in southern China.

The combination of a 3D-Printed porous Ti-6Al-4V alloy scaffold and stem cell sheet technology for the construction of biomimetic engineered bone at an ectopic site.

Cell sheet technology has been widely used in bone tissue engineering and regenerative medicine. However, controlling the shape and volume of large pieces of engineered bone tissue remains impossible without additional suitable scaffolds. Three-dimensional (3D) printed titanium (Ti) alloy scaffolds are mostly used as implant materials for repairing bone defects, but the unsatisfactory bioactivities of traditional Ti-based scaffolds severely limit their clinical applications. Herein, we hypothesize that the combination of bone marrow mesenchymal stem cell (BMSC) sheet technology and 3D porous Ti-6Al-4V (PT) alloy scaffolds could be used to fabricate biomimetic engineered bone. First, various concentrations of BMSCs were directly cocultured with PT scaffolds to obtain complexes of osteoblastic cell sheets and scaffolds. Then, as an experimental control, an osteoblastic BMSC sheet was prepared by continuous culturing under osteogenic conditions for 2 weeks without passaging and used to wrap the scaffolds. The BMSC sheet was composed of several layers of extracellular matrix (ECM) and a mass of BMSCs. The BMSCs exhibited excellent adherent, proliferative and osteogenic potential when cocultured with PT scaffolds, which may be attributed to the ability of the 3D microstructure of scaffolds to facilitate the biological behaviors of cells, as confirmed by the in vitro results. Moreover, the presence of BMSCs and ECM increased the angiogenic potential of PT scaffolds by the secretion of VEGF. Micro-CT and histological analysis confirmed the in vivo formation of biomimetic engineered bone when the complex of cocultured BMSCs and PT scaffolds and the scaffolds wrapped by prepared BMSC sheets were implanted subcutaneously into nude mice. Therefore, the combination of BMSC sheet technology and 3D-printed PT scaffolds could be used to construct customized biomimetic engineered bone, offering a novel and promising strategy for the precise repair of bone defects.

Effect of Porosity on Dynamic Response of Additive Manufacturing Ti-6Al-4V Alloys.

Additive manufacturing is a rapidly developing manufacturing technology of great potential for applications. One of the merits of AM is that the microstructure of manufactured materials can be actively controlled to meet engineering requirements. In this work, three types of Ti-6Al-4V (TC4) materials with different porosities are manufactured using selective laser melting using different printing parameters. Their dynamic behaviors are then studied by planar impact experiments based on the free-surface velocity measurements and shock-recovery characterizations. Experimental results indicate that the porosity significantly affects their dynamic response, including not only the yield, but also spall behaviors. With the increasing porosity, the Hugoniot elastic limit and spall strength decrease monotonically. In the case of TC4 of a large porosity, it behaves similar to energy-absorbing materials, in which the voids collapse under shock compression and then the spallation takes place.

Toxicity, horizontal transfer, and physiological and behavioral effects of cycloxaprid against Solenopsis invicta (Hymenoptera: Formicidae).

BACKGROUND: The red imported fire ant, Solenopsis invicta Buren, is a significant urban, agricultural, and medical pest with a wide distribution in the world. Surface or mound treatment using contact insecticide is one of the main methods to control S. invicta. In the present study, cycloxaprid, a newly discovered neonicotinoid insecticide, was evaluated for S. invicta control and compared with two referent insecticides, imidacloprid and bifenthrin. RESULTS: Surfaces or sand treated with cycloxaprid, imidacloprid, or bifenthrin caused high mortality of S. invicta workers, and the action of cycloxaprid or imidacloprid was slower than bifenthrin. Like imidacloprid and bifenthrin, cycloxaprid can be horizontally transferred from corpses or live donor ants to recipient ants. In addition, cycloxaprid- or imidacloprid-treated surfaces significantly induced the activities of acetylcholinesterase (AChE) and detoxification enzymes; nevertheless, they had no significant effect on the foraging behaviors of S. invicta workers. Also, sand treated with cycloxaprid or imidacloprid did not negatively affect the digging activities of ants. Interestingly, S. invicta workers excavated significantly more sand containing 0.01 mg/kg cycloxaprid than untreated sand in the no-choice digging bioassays. In addition, extensive nesting activities (sand excavation and stacking) were observed in the flowerpots containing untreated sand or sand treated with cycloxaprid or imidacloprid. On the contrary, bifenthrin significantly reduced the foraging, digging, and nesting activities of S. invicta workers. CONCLUSION: Cycloxaprid is a slow-acting and nonrepellent insecticide against S. invicta workers, and its contact and horizontal toxicities are slightly higher than imidacloprid. © 2022 Society of Chemical Industry.

Red imported fire ants (Hymenoptera: Formicidae) cover inaccessible surfaces with particles to facilitate food search and transportation.

Eusocial insects have evolved diverse particle-use behaviors. A previous study reported that red imported fire ants, Solenopsis invicta Buren, deposited soil particles on substances treated with essential balm, a fire ant repellent. We hypothesized that S. invicta modifies inaccessible surfaces by covering them with soil particles to facilitate food search and transportation. Here, laboratory experiments were conducted to study the particle-covering behavior of S. invicta in response to viscose surfaces or surfaces treated with essential balm or liquid paraffin in the presence of real food (sausage) or non-food objects (acrylic plates). S. invicta workers deposited significantly more soil particles on these three types of treated surfaces than on untreated surfaces. In addition, significantly more particles were relocated on viscose and paraffin-smeared surfaces in the presence of food than in the presence of non-food objects. The particle-covering behavior on viscose surfaces was also observed in the field. Interestingly, when no soil particles were available, ants searched and transported food on viscose surfaces only if the surfaces were artificially covered with sufficient quantities of soil particles but could not do so on viscose surfaces without soil particles or with insufficient quantities of soil particles. In addition, ants actively relocated particles to cover viscose surfaces if the transportation distance was within 200 mm, whereas significantly fewer particles were relocated at longer transportation distances (400 mm). Our study provides a novel example of particle use by fire ants during foraging.

A High Sensitivity Transparent Ultrasound Transducer based on PMN-PT for Ultrasound and Photoacoustic Imaging.

We recently introduced piezoelectric lithium niobate (LN) based transparent ultrasound transducers (TUT) as a new platform for developing multimodal optical, ultrasound and photoacoustic imaging systems. However, LN based TUT is limited in its signal-to-noise ratio due to material's low piezoelectricity (d 33). In this paper, we report, for the first time, a 0.2 mm thick transparent lead magnesium niobate-lead titanate (PMN-PT) based TUT (PMN-PT-TUT) for ultrasound and photoacoustic applications and compared its performance with a 0.25 mm thick transparent LN based TUT (LN-TUT). To improve the ultrasound energy transmission efficiency, TUTs were fabricated with a two-matching-layer design. This resulted in a dual frequency response with center frequencies of 7.8 MHz/13.2 MHz and corresponding bandwidths of 28.2%/66.67% for PMN-PT-TUT, and center frequencies of 7.2 MHz/11.8 MHz and bandwidths of 36.1%/62.7% for LN-TUT. The optical transmission rate of PMN-PT-TUTs and LN-TUTs are measured as ~73% and ~91% respectively at 532 nm optical wavelength. The PMN-PT-TUT exhibited higher sensitivity compared to LN-TUT with a nearly three-fold higher pulse echo amplitude and more than two-fold higher photoacoustic amplitude. Furthermore, optical resolution photoacoustic microscopy (ORPAM) experiments on phantom targets demonstrated lateral resolutions of 7 µm and 5.1 µm, and axial resolutions of 285.6 µm and 375.9 µm for PMN-PT-TUT and LN-TUT respectively. These results indicated that PMN-PT is a viable alternative to LN for developing TUT based multimodal ultrasound and photoacoustic imaging systems.

Harnessing a Novel Machine-Learning-Assisted Evolutionary Algorithm to Co-optimize Three Characteristics of an Electrospun Oil Sorbent.

The optimization of materials is challenging as it often involves simultaneous manipulation of an assembly of condition parameters, which generates an enormous combinational space. Thus, optimization models and algorithms are widely adopted to accelerate material design and optimization. However, most optimization strategies can poorly handle multiple parameters simultaneously with limited prior knowledge. Herein, we describe a novel systematic optimization strategy, namely, machine-learning-assisted differential evolution, which combines machine learning and the evolutionary algorithm together, for zero-prior-data, rapid, and simultaneous optimization of multiple objectives. The strategy enables the evolutionary algorithm to "learn" so as to accelerate the optimization process, and also to identify quantitative interactions between the condition parameters and functional characteristics of the material. The performance of the strategy is verified by in silico simulations, as well as an application on simultaneously optimizing three characteristics, namely, water contact angle, oil absorption capacity, and mechanical strength, of an electrospun polystyrene/polyacrylonitrile (PS/PAN) material as a potential sorbent for a marine oil spill. With only 50 tests, the optimal fabrication parameters were successfully located from a combinatorial space of 50 000 possibilities. The presented platform technique offers a universal enabling technology to identify the optimal conditions rapidly from a daunting parameter space to synthesize materials with multiple desired functionalities.

Food-burying behavior in red imported fire ants (Hymenoptera: Formicidae).

The food-burying behavior has been reported in many mammals and birds, but was rarely observed in invertebrates. The red imported fire ants, Solenopsis invicta Buren, is an invasive pest in many areas of the world that usually performing food-burying during the foraging processes. However, the impacted factors and measureable patterns of this behavior is largely unknown. In the present study, food-burying vs food-transport behaviors of Solenopsis invicta were observed under laboratory and field conditions. When starved (no food was provided for 37 days) in the laboratory, food (sausage) was consumed by large numbers of ants, and few burying behaviors were observed. However, when food was provided until satiation of the colonies, food-transport was suppressed and significantly more soil particles were relocated on the food and graph paper square (where the food was placed) when compared with these colonies exposed to starved conditions. Videotapes showed that soil particles (1.47 ± 0.09 mm2) were preferentially placed adjacent to (in contact with) the food items at the beginning; and after the edges were covered, ants transported significantly smaller soil particles (1.13 ± 0.06 mm2) to cover the food. Meanwhile, larger particles (1.96 ± 0.08 mm2) were pulled/dragged around (but not in contact with) the food. Interestingly, only a small number of ants, mainly the small workers, were involved in food-burying, and the ants tended to repeatedly transport soil particles. A total of 12 patterns of particle transport were identified, and soil particles were most frequently picked from the foraging arena and subsequently placed adjacent to the food. In the field, almost all released food was actively transported by Solenopsis invicta workers, and no burying behavior was observed. Our results show that the food-burying behavior of Solenopsis invicta may be associated with the suppressed foraging activity, and the burying task may be carried out by certain groups of workers.