Surface attachment of nanoparticles using oligonucleotides.

Colloidal polymer particles are widely used in a variety of applications ranging from chromatography to surface modified bioreactors in protein arrays. In the present study, surface attachment of polystyrene particles to a polystyrene substrate has been performed using oligonucleotide hybridization. Thiolated complementary oligomers of cytosine and guanine have been covalently coupled to a pyridyl disulphide (PDS) modified polyethyleneglycol tether, forming part of a triblock copolymer which is adsorbed to the polystyrene surfaces via hydrophobic polypropylene oxide center blocks. The ability to withstand shear forces was studied using a laminar flow cell and the uptake of oligomers on the particles was quantified using two complementary techniques: UV-spectroscopy and sedimentation field flow fractionation. The possibility to tether particles in a flow cell suitable for practical use in e.g. a FIA-system is demonstrated.

Fibrinogen adsorption by PS latex particles coated with various amounts of a PEO/PPO/PEO triblock copolymer.

Polystyrene (PS) latex particles of different sizes were adsorption coated with the polymeric surfactant Pluronic F108 (PEO129-PPO56-PEO129). The commercial surfactant was found to have a bimodal molecular weight distribution. However, the maximum surface concentrations resulting from adsorption of either the purified high molecular weight component or the composite were identical. An increase in the copolymer surface concentration on 252-nm particles was found to decrease their fibrinogen uptake exponentially. At maximum copolymer surface concentration, the fibrinogen uptake was two orders of magnitude lower than that of bare particles (down from 3.3 mg/m2 to 0.03 mg/m2). This surface protection was equally effective whether the adsorption involved the bimodal polymer surfactant or the purified high molecular weight fraction. The PEO tail mobility was investigated with electron paramagnetic resonance (EPR), and found to increase with an increase in polymer surface concentration. The comparatively slow motion of the PEO chains at low surface concentration indicated that not only the PPO block, but also the PEO blocks interacted hydrophobically with the PS surface. When the copolymer surface concentration was increased, the PEO tails were gradually being released, acquiring higher mobility as the surface became covered by the more strongly binding PPO blocks. Results obtained with F108 coated particles of different sizes showed that particle size had a significant effect on the fibrinogen uptake, with larger particles showing larger fibrinogen uptakes.

Flow field-flow fractionation of poly(ethylene oxide): effect of carrier ionic strength and composition.

The effects of carrier ionic strength and electrolyte composition on the retention of poly(ethylene oxide) in aqueous flow field-flow fractionation have been investigated in this work. The study shows retention to be particularly sensitive to the presence of salts, as well as to the nature of the cation. Specifically, retention effects due to sample load are found to be very different in solutions containing potassium salts compared to those observed in solutions of the corresponding sodium salts. In a potassium-containing medium, the dependence of retention on sample mass is similar to that found previously for polyelectrolytes. This effect, which is particularly prominent for samples of low molecular mass, can be attributed to specific interactions between cation and polymer.

Geometric scaling effects in electrical field flow fractionation. 1. Theoretical analysis.

This work outlines the fundamental scaling laws associated with electrical field flow fractionation channels. Although general FFF theory indicates few advantages from miniaturization, EFFF theory indicates clear advantages to miniaturization of the EFFF channel. Retention, plate heights, resolution, equilibration times, and time constants are examined. The outlined theory predicts scaling advantages in each of these areas after miniaturization. Potential applications, such as the use of these systems for sample preparation in microscale total analysis systems, and improvements associated with these theoretical predictions are also discussed.

A novel surfactant-based immobilization method for varying substrate-bound fibronectin.

Most biomaterials can be rendered adhesive for anchorage-dependent cells by adsorption of serum, isolated extracellular matrix proteins, or immobilization of peptide sequences. However, difficulties are frequently encountered in characterizing the adsorbed layer due to conformational changes in the molecules following adsorption and interference from nonspecifically adsorbed molecules. In this study, we have investigated a technique for covalently immobilizing fibronectin to the PEO-containing triblock copolymer Pluronic F108 ("F108"). We have compared this technique to solution adsorption of fibronectin for its ability to provide controlled variation of bound fibronectin and regulation of fibroblast behavior. Both simple adsorption and covalent immobilization were effective for varying substrate-bound fibronectin. However, adsorption of fibronectin did not effectively regulate fibroblast attachment or spreading in either serum-free or serum-containing media. Fibroblast attachment, spreading, cytoskeletal organization, and proliferation were effectively regulated in response to fibronectin immobilized to F108. Furthermore, F108-treated surfaces without immobilized fibronectin did not support nonspecific fibroblast attachment, even in the presence of serum-containing medium. Fibroblasts were observed to only proliferate on surfaces with high levels of immobilized fibronectin that supported extensive cell spreading and cytoskeletal organization. In summary, covalent immobilization of fibronectin to F108 provided controlled regulation of fibroblast behavior without interference from nonspecific protein adsorption, even in the presence of serum-containing medium.

Surface modification for controlled studies of cell-ligand interactions.

This work describes a method for coupling cell adhesion peptides to hydrophobic materials for the purpose of controlling surface peptide density while simultaneously preventing nonspecific protein adsorption. PEO/PPO/PEO triblock copolymers (Pluronic F108) were equipped with terminal pyridyl disulfide functionalities and used to tether RGD containing peptides to polystyrene (PS). The density of F108 on PS was 1.4 E5 +/- 2.12 E1 molecules/microm2. XPS and ToF SIMS indicated that the F108 coating was homogeneous and that the unmodified and activated F108 distributed evenly on PS. By mixing unmodified F108 with PDS-activated F108 prior to adsorption, it was possible to vary peptide density between 0 and 8.7 E4 +/- 2.66 E3 peptides/microm2, while otherwise, maintaining consistent surface properties. GRGDSY grafted PS supported cell attachment, spreading, and development of cytoskeletal structure, all of which were found to increase with increasing peptide density. Cell proliferation followed this same trend, however, maximal growth occurred at a submaximal peptide density. Cell aspect ratio varied in a biphasic manner with GRGDSY density. F108 coated PS and GRGESY grafted PS were inert to cell adhesion. Cells released from GRGDSY grafted PS upon addition of either a reducing agent or free GRGDSY, which indicates that cell-substrate interactions were mediated solely by the tethered peptides.

Computer simulation of particle separation based on non-equilibrium swelling.

Steric/hyperlayer field-flow fractionation (FFF) is an established analytical technique for separating and characterizing particles in the 1-100 microns diameter range. The separation can be based on differences in size, density, shape and mechanical properties of the particles. In the course of an analysis of the water transporter system of Chinese hamster ovary (CHO) cells and one of their high permeability mutants, the first successful attempt was made to use the steric/hyperlayer FFF system for the purpose of separating particles based on a time-dependent property, namely, the differential swelling of the two cell types. The present study was undertaken to simulate numerically the separation and suggest selection of operating conditions to minimize repetitive experiments. The computer simulation was developed using Maple V, a symbolic computing environment. It is shown that the model is able to predict an optimal velocity of carrier buffer that maximizes resolution. Predicted velocity/resolution pairs are in good agreement with available experimental data. Empirical models for the lift forces encountered in such FFF experiments, and for the zone broadening observed in work with cell sized particles, form the basis for this model.

A micromachined electrical field-flow fractionation (mu-EFFF) system.

In this work, micromachining technologies are employed to develop a miniaturized electrical field-flow fractionation (EFFF) separation system. EFFF systems are used to separate colloidal particles such as cells, liposomes, proteins, or other particulates, and to characterize emulsions and other mixtures according to particle charge density. Macromachining techniques have been used to develop existing EFFF technologies. At the present time, the limiting factor in the development of higher precision EFFF separation systems has been the manufacturing approach. In this paper, the theory behind the operation and resolution of a micron-sized EFFF (mu-EFFF) system is described and the advantages to be gained from application of micromachining technologies are given, thus motivating the need for further miniaturization. A completely fabricated mu-EFFF system is developed, separations are performed, and the mu-EFFF system is compared to the theoretically predicted results as well as the results from current macro EFFF systems.

Intraoperative crystallization on the intraocular lens surface.

PURPOSE: To report a physician survey, laboratory studies, and clinical observations of intraoperative crystallization on the surface of the intraocular lens (IOL). METHOD: We sent a survey to all ophthalmologists in the states of Wyoming, Idaho, Montana, Utah, and Colorado asking whether crystallization on the IOL surface had occurred in any of their patients and what viscoelastics, IOLs, and other solutions were used. All returned surveys were tabulated and analyzed by standard statistical means. A sample of crystallization from an IOL on a glass slide submitted by a physician was analyzed to ascertain the relative elemental composition. During in vitro laboratory studies, BSS Plus (Alcon Surgical, Fort Worth, Texas) and BSS (Alcon Surgical) were measured and analyzed for precipitation. Healon GV (Pharmacia/Upjohn, Kalamazoo, Michigan) and calcium chloride were combined in various solutions and examined for precipitate formation. Silicone IOLs and plate silicone were placed in different BSS and BSS Plus solutions with different viscoelastics and varying calcium concentrations. In seven patients, prominent crystallization on an IOL surface was examined, photographed, and followed for up to 3 years. RESULTS: Two hundred six surveyed ophthalmologists returned 181 surveys (88%) and reported 29,609 cataract surgeries, with IOL implantation with 22 eyes (0.07%) (22 patients) in which intraoperative crystallization was observed on the IOL surface during 1993. The survey indicated there was a correlation with BSS Plus (chi-square = 4.9, P = .0268) and silicone IOLs (chi-square = 6.8, P = .0093). The sample showed the cation to be calcium. CONCLUSION: Crystallization on the IOL surface during cataract surgery is a rare occurrence that may be associated with calcium as the cation related to an osmotic gradient around the IOL with increased calcium concentration. If encountered surgically, the lens should be exchanged in the operating theater after irrigating the anterior chamber with BSS and completely filling the capsular bag with a low molecular weight viscoelastic.

Thin-layer ion-exchange chromatography of proteins.

Thin-layer chromatography (TLC) is one of the simplest and most convenient techniques to separate small molecules. Of a variety of TLC separation modes, only size-exclusion was successfully used to separate proteins. In this paper, adsorption-TLC was used to separate proteins. The net charges were calculated for four model proteins, albumin, transferrin, lactoferrin and lysozyme, under different pH values. The suitable pH values for separation were determined according to the results from such calculations. Then, the adsorption isotherms of the four proteins were measured to deduce the ionic strength for appropriate elution conditions. Optimal conditions, 0.01 M bicine and pH 8.50, and a three-step elution process (1st step 0.01 M NaCl, 2nd 0.025 M NaCl, and 3rd 0.10 M NaCl), were obtained. Finally, the four model proteins were successfully separated under these elution condition.

Compositional heterogeneity in parenteral lipid emulsions after sedimentation field flow fractionation.

This study examines the size and compositional heterogeneity of particles in a commercial lipid emulsion (Intralipid) before and after equilibration with penclomedine, a highly lipophilic cytotoxic agent. Emulsions were fractionated by sedimentation field-flow fractionation (sedFFF), and particle sizes of the monodisperse fractions were determined by photon correlation spectroscopy. The triglyceride (TG), phosphatidylcholine (PC), and penclomedine (in drug loaded emulsions) contents in each fraction were determined by HPLC. The aqueous-entrapped volume within Intralipid was determined to be approximately 10% by size-exclusion chromatography using [3H]mannitol. Thirteen sedFFF fractions collected from the drug free emulsions yielded particles ranging in size from 154 to 423 nm. Total channel recoveries were 89% and 95% for TG and PC, respectively. Apparent particle densities varied significantly with size, suggesting heterogeneity in composition as confirmed by PC/TG mass ratios which varied dramatically. Computer fits of the distribution profiles suggested populations of phospholipid vesicles and oil droplets containing excess phospholipid in addition to classical emulsion droplets. Drug loading induced a significant shift of the predominant triglyceride containing population to a larger particle size. The penclomedine distribution profile closely mimicked that of the TG rather than the PC fraction. These studies suggest the need to consider not only size distribution but also compositional distribution in characterizing parenteral emulsions.

A novel method for surface modification to promote cell attachment to hydrophobic substrates.

The ability to study and regulate cell behavior at a biomaterial interface requires strict control over material surface chemistry. Perhaps the greatest challenge to researchers working in this area is preventing the fouling of a given surface due to uncontrolled protein adsorption. This work describes a method for coupling peptides to hydrophobic materials for the purpose of simultaneously preventing nonspecific protein adsorption and controlling cell adhesion. A hexapeptide containing the ubiquitous RGD cell-adhesion motif was coupled to polystyrene (PS) via a polyethylene oxide (PEO) tether in the form of a modified PEO/PPO/PEO triblock copolymer. Triblocks were adsorbed onto PS at a density of 3.3 +/- (5.14 x 10(-4)) mg/m2 (1.4 x 10(5) +/- 2.12 x 10(1) molecules/microm2), which was determined by isotope 125I labeling. The peptide, GRGDSY, was activated at the N terminus with N-Succinimidyl 3-(2-pyridyldithio) propionate and coupled to immobilized triblocks where the terminal hydroxyls had been converted to sulfhydryl groups. Surface peptide density was measured by amino acid analysis and found to be 1.4 x 10(4) +/- 0.47 x 10(4) molecules/microm2. PS modified with PEO/PPO/PEO copolymers alone was found to be inert to cell adhesion both in the presence of serum proteins and when exposed to activated RGD peptide. In contrast, PS conjugated with RGD via endgroup-activated PEO/PPO/PEO copolymers supported cell adhesion and spreading. The surface coupling scheme reported here should prove valuable for studying cell-ligand interactions under simplified and highly controlled conditions.

Rapid swelling of a CHO-K1 aspartate/glutamate transport mutant in hypo-osmotic medium.

Two Chinese hamster ovary cell (CHO-K1) mutants selected for defective glutamate transport via system X-AG are also highly permeable to small neutral molecules. Light microscopy demonstrated that exposure of one of these mutants, Ed-A1, to hypo-osmotic medium led to extremely rapid swelling, presumably due to increased water flux. When placed in 20% saline, Ed-A1 cells swelled to three times their original volume within 15 sec, a sixfold larger increase than parental CHO-K1. In spite of this rapid volume increase, mutant and wild-type cells remained viable for 20 min in dilute saline. A regulatory volume decrease in Ed-A1, and the continual swelling of CHO-K1, resulted in the two cells achieving equal size after 5 min in 20% saline. The time course of these volume changes permitted analysis of large numbers of cells by a hydrodynamic technique, steric field flow fractionation (FFF). Steric FFF demonstrated the expected inhibition of osmotic swelling of human erythrocytes by the mercurial, p-chloromercuribenzenesulfonic acid (PCMBS). However, PCMBS increased the apparent swelling rate of Ed-A1 and CHO-K1, suggesting that an aquaporin-like molecule is not responsible for any significant fraction of the water fluxes into either line. PCMBS also strongly inhibited aspartate transport by system X-AG. By taking advantage of their different swelling rates in hypotonic medium, steric FFF can separate mixtures of CHO-K1 and Ed-A1.

Chemical modification of surface active poly(ethylene oxide)-poly (propylene oxide) triblock copolymers.

A general route has been developed to chemically modify a series of poly(ethylene oxide)-poly(propylene oxide) triblock copolymers with molecular weights from 6500 to 14600. It is initiated by the introduction of p-nitrophenyl groups; such nitrophenyl conjugated copolymers are stable in an organic milieu and in a dry state but are seen to react easily with amino-containing molecules including small peptides. Among them, introduction of 2-pyridyl disulfide groups after coupling with 2-(2-pyridyldithio)ethylamine enables the selective attachment of thiol-containing molecules. The released thiopyridone in such thiol-disulfide reactions can be used to quantify the content of 2-pyridyl disulfide groups. In addition, a new type of modified copolymers was developed for the radioisotope (125I) labeling purpose that consists of a reaction of nitrophenyl conjugated copolymers with hydrazine and a subsequent coupling with N-succinimidyl 3-(4-hydroxyphenyl)propionate (Bolton-Hunter reagent). Adsorption studies of 125I-labeled and 2-pyridyl disulfide conjugated copolymers on polystyrene particles are consistent with previous determinations of surface coverage using other technologies, in turn indicating that this new chemical modification does not alter their surfactant properties on hydrophobic solid phase. The coating of common hydrophobic surfaces with 2-pyridyl disulfide conjugated copolymers has been demonstrated as a general and robust immobilization method to generate a high-sensitivity bioactive surface with low nonspecific binding. The optimal space between immobilized ligands can also be controlled by incubating the solid phase with solutions containing mixtures with different ratios of unmodified and modified copolymers.

Binding of biotinylated DNA to streptavidin-coated polystyrene latex: effects of chain length and particle size.

The binding of 5'-end biotinylated DNA, ranging in size from 100 to 5000 base pairs, was studied using streptavidin-coated polystyrene latex particles with diameters between 0.944 and 0.090 micron. The experimental binding constants and forward rate constants of this solid-phase reaction were determined to be several orders of magnitude lower than values for the biotin-streptavidin interaction in solution as expected and were shown to depend on the size of both ligand and substrate. An observed inflection in the binding constant of the biotinylated DNA appeared around 1000 base pairs, possibly indicating different surface orientations of the macroligand above and below this critical size. This effect was more pronounced for the smaller latex particles used in this study and highlighted possible differences in the surface arrangement of streptavidin on the differently sized particles. Diffusion limitation to the binding reaction was found to be significant in all cases. In this present work, an exponential relationship was established between the experimental binding constant and the number of base pairs in the biotinylated DNA. This relationship possibly provides a means to predict capacity and binding speed in cases where adsorption, purification, and release of larger DNA chains are required.

Separation and characterization of red blood cells with different membrane deformability using steric field-flow fractionation.

Human red blood cells were treated in different ways to alter their membrane deformability, and the hydrodynamic behavior of these altered cells was studied using the steric field-flow fractionation (FFF) technique. The relationships between cell retention in the FFF channel, flow-rate of the carrier fluid and the applied field strength were studied for normal and glutaraldehyde-fixed human red cells, and separation conditions were optimized. The effect of flow-induced hydrodynamic lift forces on red cell retention in the steric FFF channel was studied, and the results suggest that the membrane deformability of the red cell is an important factor contributing to the lift force, besides other previously described effects due to density and flow velocity. Using steric FFF, a mixture of normal and glutaraldehyde-fixed human red cells was completely separated with a resolution twice that found in published data from gel permeation, another hydrodynamic separation technique. Partial loss of membrane deformability, induced by different degrees of glutaraldehyde-fixation, by diamide, or by a thermal treatment, has also been studied. Steric FFF is thus shown to have potential for rapid separation and differentiation of red cells with different density and membrane deformability, conditions known to be associated with, e.g., cell senescence and certain hematological diseases.

Binding of biotinylated DNA to streptavidin-coated polystyrene latex.

The binding of 5'-end biotinylated DNA fragments was compared between streptavidin (SA)-coated commercial M-280 magnetic latex particles with a diameter of 2.8 microns and adsorption-coated polystyrene (PS) latex standard particles whose diameter is 0.272 microns. Amino acid analysis showed the protein content of the commercial particles to correspond to 4x monolayer coverage, while the adsorption-coated PS particles displayed monolayer coverage, or 8 pmol/cm2. A fluorescence-based method was developed to quantify the adsorption of FITC-labeled SA, biotin, and biotinylated DNA. The validity of the method was substantiated for the labeled protein by both amino acid analysis and a colorimetric protein assay. While the specific binding of biotin was 0.38 mol per mole of SA on the adsorption-coated 0.272-microns particles and slightly higher (0.6 mol per mole SA) on the 2.8-microns particles, the specific binding of the bulky biotinylated 300-bp DNA was more favorable on the smaller particle (0.12 mol per mole SA for 0.272 microns versus 0.04 mol per mole SA for 2.8 microns).

Structural studies of commercial fat emulsions used in parenteral nutrition.

In this paper, we demonstrate that by employing a combination of sedimentation field-flow fractionation (sedFFF) and other characterization techniques, such as photon correlation spectroscopy (PCS) and freeze-fracture electron microscopy (EM), it is possible to show that commercial fat emulsions of similar overall chemical compositions not only may exhibit different size distributions but may have different densities as well. A closer look at the density difference between droplet and suspension medium, on the one hand, and the droplet size, on the other, demonstrates that fat emulsions may have structures other than the traditional oil droplet surrounded by a monolayer of surfactant. From our determined and simulated density differences, we propose that these emulsion droplets may have a multilayered surfactant arrangement as well as an inclusion of water vesicles in the oil phase of the emulsion. Freeze-fracture EM observations provide evidence to confirm the existence of such complex structures. These findings are supported by recent EM work from other laboratories, as well as through chemical verification of elevated water contents in the oil droplets of these emulsions.

Surface modification of nanoparticles by PEO/PPO block copolymers to minimize interactions with blood components and prolong blood circulation in rats.

The biological fate of injected foreign particles is believed to be closely related to their interactions with blood plasma proteins and cells. In order to verify this correlation, we have quantitatively measured protein adsorption and blood retention profiles in rats by using model polystyrene latex nanoparticles. The in vitro interactions of these non-biodegradable particles with plasma proteins and whole blood can be altered by modifying their surfaces with a family of amphiphilic polymeric surfactants, PEO/PPO Pluronic or Tetronic block copolymers. Protein adsorption was measured by several techniques, including photon correlation spectroscopy, centrifugation, high performance liquid chromatography and field-flow fractionation. Pluronic F108 and Tetronic 908 and 1508 copolymers (with PEO terminal block MWPEO > 5000, PPO middle block MWPPO > 3000, and HLB values > 24) were shown to be the most effective surface modifiers in reducing adsorption of plasma proteins on the particles. Minimum interaction of coated particles with whole blood was also observed by optical microscopy. The blood circulation half-life of the particles injected in rats was increased from 20 min to 13 h when the latex particles (75 nm) were precoated with these block copolymers. These results suggest that nanoparticles designed for use as injectable drugs or drug carriers should display similar surface characteristics provided by such amphiphilic surface modifiers.

Electrical field-flow fractionation in particle separation. 1. Monodisperse standards.

In its original implementation, electrical field-flow fractionation (EFFF) was carried out in membrane-walled channels with the electrodes placed externally to the flow channel. The poor separation efficiency of this system left the technique largely unattended for about two decades. In the present study, we describe a new and simple approach to EFFF, which demonstrates the technique's ability to carry out rapid, high-resolution separations of colloidal samples in aqueous suspensions. The present channels are bounded by the smooth and rigid graphite electrodes which allow for the application of small voltages, typically less than 2 V, across the thin (178 microns) separation space defined by a Mylar spacer. Although this arrangement generates nominal fields of the order of 100 V/cm, polarization of the electrodes considerably reduces the effective field across the bulk of the channel to less than 1% of the nominal value. Nevertheless, under conditions of low ionic strength the system is shown to retain and separate polystyrene (PS) latex standards with sizes ranging from 60 to 10,000 nm. For small particles of comparable zeta-potential, separating in the "normal" mode of EFFF, the size selectivity Sd, is approximately 0.7. As with other FFF techniques, EFFF displays a transition from "normal" to "steric" behavior; the critical diameter for this transition is highly dependent on ionic strength, with values ranging from approximately 500 nm in deionized water to approximately 1200 nm in 133 microM aqueous NaCl under an applied voltage of 1.37 V and a flow of 1 mL/min.(ABSTRACT TRUNCATED AT 250 WORDS)