The Use of Carrot Fiber and Some Gums in the Production of Block-Type Melting Cheese.

In this study, the effect of carrot fiber and certain gums on the physicochemical, textural, microbiological, and sensory properties of block-type melting cheese, which holds a significant place in our daily food consumption, was investigated. The study also aimed to determine the impact of carrot fiber and other gums on cheese properties, as well as on yield and meltability. Carrot fiber was used at levels of 2.5% and 5.0% by weight, while carrageenan and xanthan gum were each used at levels of 0.25% and 0.50%. The cheeses were analyzed on days 1, 15, and 30. At the end of the study, it was determined that the highest total dry matter, fat, and protein values were found in the control sample due to the addition of water when preparing the cheeses with fiber and gum. The highest dry matter, fat, salt, and protein ratios were 59.65%, 29.40%, 1.48%, and 24.48%, respectively, in the control sample. The lowest fat, salt, and protein ratios were 25.00%, 1.31%, and 22.07%, respectively, in the 5.0% carrot fiber sample. The lowest dry matter value was found in the 0.5% xanthan sample, namely 53.62%. The highest L* value was measured in the control sample at 86.89, while the lowest was measured in the 5.0% carrot fiber sample at 81.86. The lowest a* and b* values were 2.82 and 29.42, respectively, in the control sample, while the highest values were 6.20 and 37.37, respectively, in the 5.0% carrot fiber sample. It was observed that the use of carrot fiber imparted an orangish color to the cheese. It was observed that the pH values of the samples were similar. According to the sensory evaluation results, the most liked sample was the control sample with 8.5 points, followed by the 0.25% xanthan sample with 8.0 points. The 5.0% carrot fiber sample received the lowest sensory appreciation with 6.1 points. It was understood that the use of carrot fiber gave the cheese an orangish color. Although the meltability varied according to the amount of gum and fiber used, it was measured at 6.92 cm in the 0.25% carrageenan sample on the first day and at 6.79 cm in the control sample on the last day of storage. It was observed that the use of fiber decreased the total bacterial count, while the use of gum increased it.

Harnessing the Role of Three Lactic Acid Bacteria (LAB) Strains for Type II Sourdough Production and Influence of Sourdoughs on Bread Quality and Maillard Reaction Products.

This study tested the effect of Companilactobacillus paralimentarius E-106, Lactiplantibacillus paraplantarum N-15 and Lactiplantibacillus plantarum SC-9 on the amount of Maillard reaction and aroma profile in bread making with main bread quality parameters. The specific volumes of sourdough and control breads were in the range of 2.97-3.04 cm3/g, and the control II bread had the highest hardness values on all days. The FAST index value was determined to be between 40.48% and 81.22% in all breads. The FAST index value was found to be higher in the control breads than in the sourdough breads. In the volatile compounds analysis, 72 volatile compounds were detected. The variety of volatile compounds in the breads with sourdough addition was higher than the control breads. Among the tested strains, Companilactobacillus paralimentarius E-106 demonstrated superior properties for bread characteristics in comparison to other strains as a type II sourdough starter. In summary, improved aroma profile and decreased Maillard reaction products can be provided by sourdough addition without changing the bread quality, along with meeting consumer demand for less additive use.

Exploring the Nutritional Impact of Sourdough Fermentation: Its Mechanisms and Functional Potential.

Sourdough fermentation is one of the oldest traditional methods in food technology and occurs as a result of fermentation of flour prepared from grains. The nutritional role of sourdough is related to the final composition of fermented foods prepared through sourdough fermentation, and recently, sourdough has become an important application to improve nutrition characteristics of bread. Thanks to lactic acid bacteria (LAB) presented in sourdough microflora and metabolites partially produced by yeasts, technological and important nutritional features of the bread improve and an increase in shelf life is achieved. In addition, sourdough bread has a low glycemic index value, high protein digestibility, high mineral and antioxidant content, and improved dietary fiber composition, making it more attractive for human nutrition compared to regular bread. When the sourdough process is applied, the chemical and physical properties of fibers vary according to the degree of fermentation, revealing the physiological importance of dietary fiber and its importance to humans' large intestine microbiota. Therefore, taking these approach frameworks into consideration, this review highlights the benefits of sourdough fermentation in increasing nutrient availability and contributing positively to support human health.

The Effects of Adding Different Stabilizers in Brine on the Physicochemical, Sensory, Microbiological and Textural Properties of White Cheese.

The aim of the present study was to determine the effect of four different thickening agents (guar gum, carrageenan, xanthan gum, and gelatin) on the textural and sensory properties of white cheese. For this purpose, various white cheeses were manufactured with brines (the salt ratio was 8% and 12%) that contained different types and concentrations of gums; white cheese textural and sensory properties were studied during storage (at 4 °C). Also, microbiological properties including lactic acid bacteria (LAB) and mesophilic aerobic bacteria were investigated. The physicochemical, textural, microbiological, and sensory properties of the cheeses were determined on the 1st, 15th, and 30th days of storage. During the storage period of cheese, the top-rated samples in terms of sensory properties were cheeses with gelatin and carrageenan gum. The microbiological data displayed that there was an inverse relationship between the number of bacteria and the amount of gum used, although it was not precisely linear. At the same time, the highest values were generally determined in the control samples, and although not to a very great extent, gelatinous examples were found to contain a lower number of lactic acid bacteria than others. Regarding the textural properties, the hardness value of all samples containing gelatin showed a continuous increasing trend, while the springiness values increased only in the samples with xanthan gum and guar gum. At the end of storage, it was observed that the inherent adhesiveness of the samples decreased by more than half and the use of gelatin resulted in an increase in the gumminess of the cheeses. As a result, it was determined that reducing the salt used in the brine by up to 8% did not cause any defect since stabilizers were preventing water passage into the cheese by holding water.

Effects of in situ exopolysaccharide production and fermentation conditions on physicochemical, microbiological, textural and microstructural properties of Turkish-type fermented sausage (sucuk).

In this work, the role of in situ exopolysaccharide (EPS) production under different fermentation conditions on physicochemical, microbiological, textural and microstructural properties of sucuk was determined. For this purpose, the effect of EPS producing strains (control, strain 1, strain 2 and mixture) and fermentation conditions (fermentation temperature; 14, 16 and 18°C and time; 8, 12 and 16days) on physicochemical, microbiological, textural and microstructural properties were investigated using response surface methodology. In situ EPS production was observed to remarkably affect these properties while fermentation conditions were also seen to dominantly influence the physicochemical properties of sucuk, revealing that the ripening temperature appeared to be more determinant factor. EPS producing cultures enhanced the textural properties of sucuk which became harder, less adhesive and tougher. The microstructural analysis revealed the formation of web-like structure by in situ EPS production in sucuk mix during fermentation process. This study revealed the importance of in situ EPS production on final technological properties of sucuk.

Development of a fermented ice-cream as influenced by in situ exopolysaccharide production: Rheological, molecular, microstructural and sensory characterization.

This study aimed to investigate the role of in situ exopolysaccharide (EPS) production by EPS(+)Streptococcus thermophilus strains on physicochemical, rheological, molecular, microstructural and sensory properties of ice cream in order to develop a fermented and consequently functional ice-cream in which no stabilizers would be required in ice-cream production. For this purpose, the effect of EPS producing strains (control, strain 1, strain 2 and mixture) and fermentation conditions (fermentation temperature; 32, 37 and 42 °C and time; 2, 3 and 4h) on pH, S. thermophilus count, EPS amount, consistency coefficient (K), and apparent viscosity (η50) were investigated and optimized using single and multiple response optimization tools of response surface methodology. Optimization analyses indicated that functional ice-cream should be fermented with strain 1 or strain mixture at 40-42 °C for 4h in order to produce the most viscous ice-cream with maximum EPS content. Optimization analysis results also revealed that strain specific conditions appeared to be more effective factor on in situ EPS production amount, K and η50 parameters than did fermentation temperature and time. The rheological analysis of the ice-cream produced by EPS(+) strains revealed its high viscous and pseudoplastic non-Newtonian fluid behavior, which demonstrates potential of S. thermophilus EPS as thickening and gelling agent in dairy industry. FTIR analysis proved that the EPS in ice-cream corresponded to a typical EPS, as revealed by the presence of carboxyl, hydroxyl and amide groups with additional α-glycosidic linkages. SEM studies demonstrated that it had a web-like compact microstructure with pores in ice-cream, revealing its application possibility in dairy products to improve their rheological properties.

Effect of yoghurt or yoghurt serum on microbial quality of cig kofte.

Cig kofte, raw meatball is a traditionally produced meat product in Turkey and some other Middle East countries. It is prepared from mixtures of finely minced raw beef, bulgur, onions, various spices and tap water. Cig kofte is an uncooked product and popularly consumed with lettuce and lemon juice. In this study, yoghurt or yoghurt serum (YS) were added to the mixtures of cig kofte instead of tap water to reduce microbial risks of the raw meatball. Additionally, the effects of yoghurt and YS on some physicochemical characteristics of cig kofte were investigated. Cig kofte is generally consumed within a few hours after the preparation because of its raw nature. Also, it is generally sold under unhygienic conditions in restaurants and restaurant-like places. For this purpose, reducing of the microbial load of cig kofte is important. In the results, Escherichia coli and Listeria monocytogenes were not detected in any samples. While lactic acid bacteria count increased by addition of yoghurt and YS, the number of other microorganisms except for total aerobic mesophilic bacteria (TAMB) were decreased. The aw values and% moisture contents of the samples were varied between 0.88-0.94 and 46.25-49.72, respectively. The pH values of the samples were slightly changed during the storage of 24 h while no changes detected in the control samples during the storage. In conclusion, it can be suggested that using the yoghurt or YS instead of tap water in the preparation of cig kofte might ensure the microbial safety, increase the nutritional value and its flavour or aroma.

Efficacy of various plant hydrosols as natural food sanitizers in reducing Escherichia coli O157:H7 and Salmonella Typhimurium on fresh cut carrots and apples.

In the present study, inhibitory effects of the hydrosols of thyme, black cumin, sage, rosemary and bay leaf were investigated against Salmonella Typhimurium and Escherichia coli O157:H7 inoculated to apple and carrots (at the ratio of 5.81 and 5.81 log cfu/g for S. Typhimurium, and 5.90 and 5.70 log cfu/g for E. coli O157:H7 on to apple and carrot, respectively). After the inoculation of S. Typhimurium or E. coli O157:H7, shredded apple and carrot samples were washed with the hydrosols and sterile tap water (as control) for 0, 20, 40 and 60 min. While the sterile tap water was ineffective in reducing (P>0.05) S. Typhimurium and E. coli O157:H7, 20 min hydrosol treatment caused a significant (P<0.05) reduction compared to the control group. On the other hand, thyme and rosemary hydrosol treatments for 20 min produced a reduction of 1.42 and 1.33 log cfu/g respectively in the E. coli O157:H7 population on apples. Additional reductions were not always observed with increasing treatment time. Moreover, thyme hydrosol showed the highest antibacterial effect on both S. Typhimurium and E. coli O157:H7 counts. Inhibitory effect of thyme hydrosol on S. Typhimurium was higher than that for E. coli O157:H7. Bay leaf hydrosol treatments for 60 min reduced significantly (P<0.05) E. coli O157:H7 population on apple and carrot samples. In conclusion, it was shown that plant hydrosols, especially thyme hydrosol, could be used as a convenient sanitizing agent during the washing of fresh-cut fruits and vegetables.