RESUMO
Silicon/graphite composites show a high specific capacity and improved cycling stability. However, the intrinsic difference between silicon and graphite, such as unequal volume expansion and lithium-ion diffusion kinetics, causes persistent stress at the silicon/graphite interface and the expansion of the electrical isolation region. Herein, carbon nanotubes (CNTs) were successfully introduced into silicon/carbon composites via ball milling and spray drying, which effectively relieved the stress concentration at the direct contact interface and formed a three-dimensional conductive structure. In addition, CNTs and amorphous carbon acting as "lubricants" further improved the inherent differences between silicon and graphite. As a result, the Si/CNTs/G@C-1 anode increased the cycling performance and rate capability, with a reversible capacity of up to 465 mAh g-1 after 500 cycles at 1 A g-1 and superior rate performance of 523 mAh g-1 at 2 A g-1. It is believed that this strategy may provide a feasible preparation of large-scale high-content silicon-based nanocomposite anodes in lithium-ion batteries.
RESUMO
Birnessite-type MnO2 (δ-MnO2) exhibits great potential as a cathode material for aqueous zinc-ion batteries (AZIBs). However, the structural instability and sluggish reaction kinetics restrict its further application. Herein, a unique protons intercalation strategy was utilized to simultaneously modify the interlayer environment and transition metal layers of δ-MnO2. The intercalated protons directly form strong O H bonds with the adjacent oxygens, while the increased H2O molecules also establish a hydrogen bond network (O H···O) between H2O molecules or bond with adjacent oxygens. Based on the Grotthuss mechanism, these bondings ultimately enhance the stability of layered structures and facilitate the rapid diffusion of protons. Moreover, the introduction of protons induces numerous oxygen vacancies, reduces steric hindrance, and accelerates ion transport kinetics. Consequently, the protons intercalated δ-MnO2 (H-MnO2-x) demonstrates exceptional specific capacity of 401.7 mAh/g at 0.1 A/g and a fast-charging performance over 1000 cycles. Density functional theory analysis confirms the improved electronic conductivity and reduced diffusion energy barrier. Most importantly, electrochemical quartz crystal microbalance tests combining with ex-situ characterizations verify the inhibitory effect of the interlayer proton environment on basic zinc sulfate formation. Protons intercalation behavior provides a promising avenue for the development of MnO2 as well as other cathodes in AZIBs.
RESUMO
Heterostructure engineering is considered a crucial strategy to modulate the intrinsic charge transfer behavior of materials, enhance catalytic activity, and optimize sulfur electrochemical processes. However, parsing the role of heterogeneous interface-structure-property relationships in heterostructures is still a key scientific issue to realize the efficient catalytic conversion of polysulfides. Based on this, molybdenum carbide (Mo2C) was successfully partial reduced to molybdenum metal (Mo) via a thermal reduction at high-temperature and the typical Mo-Mo2C-based Mott-Schottky heterostructures were simultaneously constructed, which realized the modulation of the electronic structure of Mo2C and optimized the conversion process of lithium polysulfides (LPS). Compared with single molybdenum carbide, the modulated molybdenum carbide acts as an electron donor with stronger Mo-S bonding strength as well as higher polysulfide adsorption energy, faster Li2S conversion kinetics, and greatly facilitates the adsorption â catalysis process of LPS. As a result, yolk-shell Mo-Mo2C heterostructure (C@Mo-Mo2C) exhibits excellent cycling performance as a sulfur host, with a discharge specific capacity of 488.41 mAh g-1 for C@Mo-Mo2C/S at 4 C and present an excellent high-rate cyclic performance accompanied by capacity decay rate of 0.08 % per cycle after 400 cycles at 2 C. Heterostructure-acting Mo2C electron distribution modulation engineering may contributes to the understanding of the structure-interface-property interaction law in heterostructures and further enables the efficient modulation of the chemical behavior of sulfur.
RESUMO
Engineering transition metal compounds (TMCs) catalysts with excellent adsorption-catalytic ability has been one of the most effective strategies to accelerate the redox kinetics of sulfur cathodes. Herein, this review focuses on engineering TMCs catalysts by cation doping/anion doping/dual doping, bimetallic/bi-anionic TMCs, and TMCs-based heterostructure composites. It is obvious that introducing cations/anions to TMCs or constructing heterostructure can boost adsorption-catalytic capacity by regulating the electronic structure including energy band, d/p-band center, electron filling, and valence state. Moreover, the electronic structure of doped/dual-ionic TMCs are adjusted by inducing ions with different electronegativity, electron filling, and ion radius, resulting in electron redistribution, bonds reconstruction, induced vacancies due to the electronic interaction and changed crystal structure such as lattice spacing and lattice distortion. Different from the aforementioned two strategies, heterostructures are constructed by two types of TMCs with different Fermi energy levels, which causes built-in electric field and electrons transfer through the interface, and induces electron redistribution and arranged local atoms to regulate the electronic structure. Additionally, the lacking studies of the three strategies to comprehensively regulate electronic structure for improving catalytic performance are pointed out. It is believed that this review can guide the design of advanced TMCs catalysts for boosting redox of lithium sulfur batteries.
RESUMO
Modulating the coordination configuration of single Fe atom has been an efficient strategy to strengthen the redox dynamics for lithium-sulfur batteries (LSBs) but remains challenging. Herein, the single Fe atom is functioned with nitrogen and carbon atoms in the first shell, and simultaneously, oxidized sulfur (âSOx) in the second shell, which presents a lower antibonding state and well address the redox activity of sulfur cathodes. In the ternary-coordinated single Fe atom catalyst (FeN2C2-SOx-NC), the binary structure of FeN2C2 provides a lower Fe-S bonding strength and d-p orbital hybridization, which obviously optimizes the adsorption and desorption behavior of sulfur species during the reduction and oxidation reaction processes. Simultaneously, the âSOx redistributes the electron density of the coordinating nitrogen atoms, which possesses high electron-withdrawing ability and develops electrocatalytic activity. As a result, the sulfur cathodes with FeN2C2-SOx-NC present an excellent high-rate cyclic performance, accompanied by a capacity decay rate of 0.08% per cycle for 500 cycles at 4.0 C. This study provides new insights for optimizing the redox dynamics of sulfur cathodes in LSBs at the atomic level.
RESUMO
The battery performance of sulfur cathode has obviously depended on the redox reaction kinetics of polysulfides upon cycling. Herein, an effective strategy was proposed to achieve the conversion from 2H (semiconductor phase) to 1T (metal phase) in hollow nano-flowered molybdenum selenide sphere (HFSMS) through crystal phase engineering. The HFSMS with different phase ratio was realized by regulating the proportion of reducing agents. Specifically, the 1T phase content can reach up to 60.8%, and then subsequently decreased to 59.1% with the further increase of the reducing agent. The as-prepared HFSMS with the 1T phase content of 60.8% showed a smallest Tafel slopes (49.99 and 79.65 mV/dec in reduction and oxidation process, respectively), fastest response time and highest response current (520 s, 0.459 mA in Li2S deposition test), which further exhibited excellent catalytic activity and faster reaction kinetics. This result was verified by electrochemical performance, which manifested as stable cycle life with only 0.112% capacity decay per cycle. It was found that the hollow structure can ensures a rich sulfur storage space, and effectually buffer the volume changes of the active substance. More importantly, the improved performance is attributed to the introduction of the 1T phase, which significantly improves the catalytic activity of MoSe2with promoting the polysulfide conversion.
RESUMO
2D imidazole MOFs are considered to be ideal carbon precursors for oxygen reduction reactions owing to their adjustable ligand components and durable coordination mode. Due to the massive electron delocalization in the lamella, the conjugative effect among 2D MOF layers immensely restricts the exposure of catalytic sites after carbonization, which makes the decoupling layer extremely important on the premise of ensuring activity. Herein, atomic thickness ultra-thin zinc-imidazole MOF precursors were prepared through a bottom-up ligand regulated strategy to achieve the aim of lamellar decoupling. The introduction of heterologous ligands excites stable delocalized electrons, resulting in a decrease in the interlayer force of 2D zinc-imidazole MOF precursors. Subsequent salt template-supported ammonia pyrolysis assisted the MOF-derived carbon sheets to grow along the transverse direction and optimize pore size distribution as did the doping nitrogen type. The MOF-derived carbon sheets demonstrated increasing mesopores and fringe graphitic N which could significantly promote the mass transfer and electron transfer speed during the oxygen reduction reaction. In addition, the obtained ultra-thin carbon delivered an outstanding onset potential (0.98 V vs. RHE) and durability (retaining 91% of the initial current after 12000 s of operation), showing tremendous commercial prospects in sustainable energy.
RESUMO
Lithium-sulfur batteries have been considered as potential electrochemical energy-storage devices owing to their satisfactory theoretical energy density. Nonetheless, the inferior conversion efficiency of polysulfides in essence leads to fast capacity decay during the discharge/charge cycle. In this work, it is successfully demonstrated that the conversion efficiency of lithium polysulfides is remarkably enhanced by employing a well-distributed atomic-scale Fe-based catalyst immobilized on nitrogen-doped graphene (Fe@NG) as a coating of separator in lithium-sulfur batteries. The quantitative electrocatalytic efficiency of the conversion of lithium polysulfides is determined through cyclic voltammetry. It is also proven that the Fe-NX configuration with highly catalytic activity is quite beneficial for the conversion of lithium polysulfides. In addition, the adsorption and permeation experiments distinctly indicate that the strong anchoring effect, originated from the charge redistribution of N doping into the graphene matrix, inhibits the movement of lithium polysulfides. Thanks to these advantages, if the as-prepared Fe@NG catalyst is combined with polypropylene and applied as a separator (Fe@NG/PP) in Li-S batteries, a high initial capacity (1616â mA h g-1 at 0.1â C), excellent capacity retention (93 % at 0.2â C, 70 % at 2â C), and superb rate performance (820â mA h g-1 at 2â C) are achieved.
RESUMO
Li-S batteries have been attracting increasing interest owing to their remarkable advantages of low cost, high theoretical capacity and high theoretical energy density. Nevertheless, the severe "shuttle effects" of lithium polysulfides have markedly limited the performance of the cells and further hindered their commercial applications. Herein, a novel scheme combining a transformation strategy with ammonia treatment was developed to fabricate ZIF-8-derived nitrogen-doped hierarchically porous carbon (NHPC/NH3). When NHPC/NH3 was used as a host of sulfur, the obtained S@NHPC/NH3 cathode for Li-S cells presented an initial specific capacity of 1654 mA h g-1 and an outstanding cycling stability with only 0.27% attenuation per cycle from the 30th cycle to 130th cycle. Together with the theoretical calculation, it was concluded that such excellent electrochemical performances should be attributed to the suppressed "shuttle effect" via both physical and chemical adsorption of lithium polysulfides in the optimized microporous structures with effective nitrogen doping sites as well as the improved kinetics owing to the abundant meso/macroporous structures.