RESUMO
In spite of extensive research and appreciable progress, in aqueous zinc-ion batteries, Zn metal anode is struggling with low Zn utility and poor cycling stability. In this study, a 3D "electrochemical welding" composite electrode is designed by introduction of ZnO/C nanofibers film to copper foils as an anode according to pre-electrodeposition active Zn (Zn@ZnO/C-Cu). The flow of Zn2+ through carbon fiber layer is regulated by zincophilic ZnO, promoting homogeneous diffusion of Zn2+ to Cu foil. In subsequent Zn deposition/stripping processes, the hydrophobicity of ZnO/C fiber layer reduces water at the interface of Zn@ZnO/C-Cu and results in uniform electric field significant suppressing growth of Zn dendritic and side reactions. Thus, pre-electrodeposition active Zn electrochemical welds ZnO/C nanofibers and Cu foil collectively provide stable charge/electron transfer and stripping/plating of Zn with low polarization and excellent cycling performance. The assembled symmetrical batteries exhibit stable cycling performance for over 470 h under 20% utilization of Zn at 5 mA cm-2, and an average coulombic efficiency of 99.9% at low negative/positive capacity ratio (N/P = 1) after 1000 cycles in the Zn@ZnO/C-Cu||Na2V6O16·1.5H2O full cell.
RESUMO
MXene usually exhibits weak pseudo-capacitance behavior in aqueous zinc-ion batteries, which cannot provide sufficient reversible capacity, resulting in the decline of overall capacity when used as the cathode materials. Taking inspiration from polymer electrolyte engineering, we have conceptualized an in situ induced growth strategy based on MXene materials. Herein, 5.25 % MXene was introduced into the nucleation and growth process of vanadium oxide (HVO), providing the heterogeneous nucleation site and serving as an initiator to regulate the morphology and structural of vanadium oxide (T-HVO). The resulted materials can significantly improve the capacity and rate performance of zinc-ion batteries. The growth mechanism of T-HVO was demonstrated by both characterizations and DFT simulations, and the improved performance was systematically investigated through a series of in situ experiments related to dynamic analysis steps. Finally, the evaluation and comparison of various defect introduction strategies revealed the efficient, safety, and high production output characteristics of the in situ induced growth strategy. This work proposes the concept of in situ induced growth strategy and discloses the induced chemical mechanism of MXene materials, which will aid the understanding, development, and application of cathode in aqueous zinc-ion batteries.
RESUMO
The shuttling and sluggish conversion kinetics of lithium polysulfides (LiPSs) lead to poor cycling performance and low energy efficiency in lithium-sulfur batteries (LSBs). In this work, a hierarchically structured nanocomposite, synthesized through a surfactant-directed hydrothermal growth following dopamine-protected pyrolysis, serves as a bidirectional catalyst for LSBs. This nanocomposite comprises N-doped reduced graphene oxide (rGO) nanosheets anchored with uniformly distributed TiO2-x nanoparticles via interfacial N-Ti and C-Ti bonding, resulting in the formation of abundant 2D/0D Schottky heterojunctions (rGO/TiO2-x). Density functional theory (DFT) calculations and in situ Raman characterizations demonstrate that rGO/TiO2-x effectively inhibits the shuttling of LiPSs with enhanced redox kinetics, achieving high utilization of the sulfur cathode and improving the overall reversibility. A high areal capacity is attained at a high sulfur loading and a low electrolyte/sulfur ratio. The initial specific capacity reaches 1010 mA h g-1 at a current density of 0.2C (1C = 1675 mA g-1), and a retention of 86.4 % is attained over 100 cycles. A light-emitting diode (LED) screen using two LSBs with rGO/TiO2-x demonstrates their high potential for practical applications.
RESUMO
Vanadium oxides, particularly hydrated forms like V2O5·nH2O (VOH), stand out as promising cathode candidates for aqueous zinc ion batteries due to their adjustable layered structure, unique electronic characteristics, and high theoretical capacities. However, challenges such as vanadium dissolution, sluggish Zn2+ diffusion kinetics, and low operating voltage still hinder their direct application. In this study, we present a novel vanadium oxide ([C6H6N(CH3)3]1.08V8O20·0.06H2O, TMPA-VOH), developed by pre-inserting trimethylphenylammonium (TMPA+) cations into VOH. The incorporation of weakly polarized organic cations capitalizes on both ionic pre-intercalation and molecular pre-intercalation effects, resulting in a phase and morphology transition, an expansion of the interlayer distance, extrusion of weakly bonded interlayer water, and a substantial increase in V4+ content. These modifications synergistically reduce the electrostatic interactions between Zn2+ and the V-O lattice, enhancing structural stability and reaction kinetics during cycling. As a result, TMPA-VOH achieves an elevated open circuit voltage and operation voltage, exhibits a large specific capacity (451 mAh g-1 at 0.1 A g-1) coupled with high energy efficiency (89%), the significantly-reduced battery polarization, and outstanding rate capability and cycling stability. The concept introduced in this study holds great promise for the development of high-performance oxide-based energy storage materials.
RESUMO
Zinc-iodine batteries (Zn-I2) are extremely attractive as the safe and cost-effective scalable energy storage system in the stationary applications. However, the inefficient redox kinetics and "shuttling effect" of iodine species result in unsatisfactory energy efficiency and short cycle life, hindering their commercialization. In this work, Ni single atoms highly dispersed on carbon fibers is designed and synthesized as iodine anchoring sites and dual catalysts for Zn-I2 batteries, and successfully inhibit the iodine species shuttling and boost dual reaction kinetics. Theoretical calculations indicate that the reinforced d-p orbital hybridization and charge interaction between Ni single-atoms and iodine species effectively enhance the confinement of iodine species. Ni single-atoms also accelerate the iodine conversion reactions with tailored bonding structure of IâI bonds and reduced energy barrier for the dual conversion of iodine species. Consequently, the high-rate performance (180 mAh g-1 at 3 A g-1), cycling stability (capacity retention of 74% after 5900 cycles) and high energy efficiency (90% at 3 A g-1) are achieved. The work provides an effective strategy for the development of iodine hosts with high catalytic activity for Zn-I2 batteries.
RESUMO
Sodium-ion batteries (SIBs) have been extensively studied owing to the abundance and low-price of Na resources. However, the infeasibility of graphite and silicon electrodes in sodium-ion storage makes it urgent to develop high-performance anode materials. Herein, α-MnSe nanorods derived from δ-MnO2 (δ-α-MnSe) are constructed as anodes for SIBs. It is verified that α-MnSe will be transferred into ß-MnSe after the initial Na-ion insertion/extraction, and δ-α-MnSe undergoes typical conversion mechanism using a Mn-ion for charge compensation in the subsequent charge-discharge process. First-principles calculations support that Na-ion migration in defect-free α-MnSe can drive the lattice distortion to phase transition (alpha â beta) in thermodynamics and dynamics. The formed ß-MnSe with robust lattice structure and small Na-ion diffusion barrier boosts great structure stability and electrochemical kinetics. Hence, the δ-α-MnSe electrode contributes excellent rate capability and superior cyclic stability with long lifespan over 1000 cycles and low decay rate of 0.0267% per cycle. Na-ion full batteries with a high energy density of 281.2 Wh·kg-1 and outstanding cyclability demonstrate the applicability of δ-α-MnSe anode.
RESUMO
The electrochemical properties of vanadium-based materials as cathode materials for aqueous zinc ion batteries are still restricted by low conductivity, sluggish reaction kinetics, and poor structural stability. Herein, the [VO6] octahedron, as the basic unit of vanadium-oxide layer of ammonium vanadates (NH4V4O10, denoted as NVO), is incorporated by F atoms to regulate the coordinated environment of vanadium. Density functional theory (DFT) calculations and experimental results show that both physicochemical and electrochemical properties of NVO are improved by F-doping. The enhanced electronic conductivity accelerates the electron transfer and the expanded interlayer spacing expedites the diffusion kinetics of zinc ions. As a result, the F-doped NVO (F-NVO) electrode shows a high discharge capacity (465 mAh g-1 at 0.1 A g-1), good rate capability (260 mAh g-1 at 5 A g-1), and long-term cycling stability (88% capacity retention over 2000 cycles at 4 A g-1). The reaction kinetics and energy storage mechanism of F-NVO are further validated by in situ and ex situ characterizations.
RESUMO
Sodium-ion hybrid capacitors (SIHCs) have attracted much attention due to integrating the high energy density of battery and high out power of supercapacitors. However, rapid Na+ diffusion kinetics in cathode is counterbalanced with sluggish anode, hindering the further advancement and commercialization of SIHCs. Here, aiming at conversion-type metal sulfide anode, taking typical VS2 as an example, a comprehensive regulation of nanostructure and electronic properties through NH4 + pre-intercalation and Mo-doping VS2 (Mo-NVS2) is reported. It is demonstrated that NH4 + pre-intercalation can enlarge the interplanar spacing and Mo-doping can induce interlayer defects and sulfur vacancies that are favorable to construct new ion transport channels, thus resulting in significantly enhanced Na+ diffusion kinetics and pseudocapacitance. Density functional theory calculations further reveal that the introduction of NH4 + and Mo-doping enhances the electronic conductivity, lowers the diffusion energy barrier of Na+, and produces stronger d-p hybridization to promote conversion kinetics of Na+ intercalation intermediates. Consequently, Mo-NVS2 delivers a record-high reversible capacity of 453 mAh g-1 at 3 A g-1 and an ultra-stable cycle life of over 20 000 cycles. The assembled SIHCs achieve impressive energy density/power density of 98 Wh kg-1/11.84 kW kg-1, ultralong cycling life of over 15000 cycles, and very low self-discharge rate (0.84 mV h-1).
RESUMO
Cation-disordered Rocksalt oxides (DRXs) are a promising new class of cathode materials for Li-ion batteries due to their natural abundance, low cost and great electrochemical performance. High entropy strategy in Mn-based DRXs appears to be an effective strategy for improving the rate capability, but it suffers from challenges including capacity degradation. The present paper reports a new group of high entropy DRXs (HE DRX) based on Ni2+ -Nb5+ pair; the structural and chemical evolution upon cycling of DRXs with an increasing transition metal (TM) species are systematically investigated. An explanation is proposed for how the crystal field stability energy determines that HE DRX could exist in single Rocksalt solid solution structures. We further reveal that the charge compensation mechanism in HE DRX is the result of various TM synergistic effect. More importantly, through various in situ and ex situ techniques and theoretical calculation, the effective integration of more TM cation species within the HE DRX framework promotes better Li+ diffusion and improves lattice oxygen stability, consequently increasing capacity upon cycling.
RESUMO
Vanadyl phosphate (VOPO4 ·2H2 O) has been regarded as one of the most promising cathode materials for aqueous Zn-ion batteries due to its distinct layered structure. However, VOPO4 ·2H2 O has not yet demonstrated the exceptional Zn ion storage performance owing to the structural deterioration during repeated charging/discharging process and poor intrinsic conductivity. In this work, 2D sodium vanadyl phosphate (NaVOPO4 ·0.83H2 O, denoted as NaVOP) is designed as a cathode material for Zn-ion batteries, in which sodium ions are preinserted into the interlayer, replacing part of water. Benefiting from the in situ surface oxidization, improved electronic conductivity, and increased hydrophobicity, the NaVOP electrode exhibits a high discharge capacity of 187 mAh g-1 at 0.1 A g-1 after activation, excellent rate capability and enhanced cycling performance with 85% capacity retention after 1500 cycles at 1 A g-1 . The energy storage mechanism of the NaVOP nanoflakes based on the rapid Zn2+ and H+ intercalation pseudocapacitance are investigated via multiple ex situ characterizations.
RESUMO
Li-rich Mn-based oxide cathodes (LMOs) are regarded as one of the most prospective high energy density cathodes due to the reversible anion redox reaction, which gives them a very high capacity. However, LMOs materials usually have problems like low initial coulombic efficiency (ICE) and poor cycling performance during cycling, which are associated with irreversible surface O2 release and unfavourable electrode/electrolyte interface side reactions. Herein, an innovative and scalable NH4Cl-assisted gas-solid interfacial reaction treatment technique is employed to construct oxygen vacancies and spinel/layered heterostructures simultaneously on the surface of LMOs. The synergistic effect of the oxygen vacancy and the surface spinel phase can not only effectively enhance the redox properties of the oxygen anion and inhibit irreversible oxygen release, but also effectively mitigate the side reactions at the electrode/electrolyte interface, inhibit the formation of CEI films and stabilize the layered structure. The electrochemical performance of the treated NC-10 sample improved significantly, showing an increase in ICE from 77.4 % to 94.3 % and excellent rate capability and cycling stability, with a capacity retention of 77.9 % after 400 cycles at 1 C. This oxygen vacancy and spinel phase integration strategy offers an exciting prospect and avenue for improving the integrated electrochemical performance of LMOs.
RESUMO
This paper reports the synthesis and characterization of hydrated vanadium oxide (VOH) and chemically preintercalated polyanilines in VOH, labeled as PAVO-H as the cathode material for aqueous zinc-ion batteries. Synthesized PAVO-H has a high surface area and rod-shaped morphology. PAVO-H has an increased interlayer distance of 13.36 Å. PAVO-H offers high specific capacities of 330 and 225 mAh g-1 at 50 mA g-1 and 4 A g-1 of current densities, respectively, with a 92% capacity retention rate of over 3000 cycles. The preintercalation of polyaniline is likely to catalyze the redox reaction and facilitate and simplify transport kinetics. It is also possible that the preintercalation of polyaniline permits the insertion of large hydrated Zn ions and reduces the formation of zinc basic salts.
RESUMO
Metal-enhanced luminescence (MEL) originated from near field interactions of luminescence with the surface plasmon resonance (SPR) of nearby metallic nanoparticles (NPs) is an effective strategy to increase luminescence detection sensitivity in oxygen sensors. Once the excitation light induces SPR, the generated enhanced local electromagnetic filed will result in an enhanced excitation efficiency and an increased radiative decay rates of luminescence in close proximity. Meanwhile, the nonradioactive energy transfer from the dyes to the metal NPs, leading to emission quenching, can also be affected by their separation. The extent of the intensity enhancement depends critically on the particle size, shape and the separation distance between the dye and the metal surface. Here, we prepared core-shell Ag@SiO2 with different core sizes (35â¯nm, 58â¯nm and 95â¯nm) and shell thickness (5-25â¯nm) to investigate the size and separation dependence on the emission enhancement in oxygen sensors at 0-21% oxygen concentration. Intensity enhancement factors of 4-9 were observed with a silver core size of 95â¯nm and silica shell thickness of 5â¯nm at 0-21% O2. In addition, the intensity enhancement factor increases with increasing core size and decreasing shell thickness in the Ag@SiO2-based oxygen sensors. Using Ag@SiO2 NPs result in brighter emission throughout the 0-21% oxygen concentration. Our fundamental understanding of MEP in the oxygen sensors provides us the opportunity to design and control efficient luminescence enhancement in oxygen and other sensors. .
RESUMO
The reversibility and cyclability of aqueous zinc-ion batteries (ZIBs) are largely determined by the stabilization of the Zn anode. Therefore, a stable anode/electrolyte interface capable of inhibiting dendrites and side reactions is crucial for high-performing ZIBs. In this study, we investigated the adsorption of 1,4-dioxane (DX) to promote the exposure of Zn (002) facets and prevent dendrite growth. DX appears to reside at the interface and suppress the detrimental side reactions. ZIBs with the addition of DX demonstrated a long-term cycling stability of 1000 h in harsh conditions of 10 mA cm-2 with an ultrahigh cumulative plated capacity of 5 Ah cm-2 and shows a good reversibility with an average Coulombic efficiency of 99.7%. The Zn//NH4V4O10 full battery with DX achieves a high specific capacity (202 mAh g-1 at 5 A g-1) and capacity retention (90.6% after 5000 cycles), much better than that of ZIBs with the pristine ZnSO4 electrolyte. By selectively adjusting the Zn2+ deposition rate on the crystal facets with adsorbed molecules, this work provides a promising modulation strategy at the molecular level for high-performing Zn anodes and can potentially be applied to other metal anodes suffering from instability and irreversibility.
RESUMO
The utilization of lignin, the most abundant aromatic biomass component, is at the forefront of sustainable engineering, energy, and environment research, where its abundance and low-cost features enable widespread application. Constructing lignin into material parts with controlled and desired macro- and microstructures and properties via additive manufacturing has been recognized as a promising technology and paves the way to the practical application of lignin. Considering the rapid development and significant progress recently achieved in this field, a comprehensive and critical review and outlook on three-dimensional (3D) printing of lignin is highly desirable. This article fulfils this demand with an overview on the structure of lignin and presents the state-of-the-art of 3D printing of pristine lignin and lignin-based composites, and highlights the key challenges. It is attempted to deliver better fundamental understanding of the impacts of morphology, microstructure, physical, chemical, and biological modifications, and composition/hybrids on the rheological behavior of lignin/polymer blends, as well as, on the mechanical, physical, and chemical performance of the 3D printed lignin-based materials. The main points toward future developments involve hybrid manufacturing, in situ polymerization, and surface tension or energy driven molecular segregation are also elaborated and discussed to promote the high-value utilization of lignin.
RESUMO
Li3VO4 (LVO) is considered as a novel alternative anode material for lithium-ion batteries (LIBs) due to its high capacity and good safety. However, the inferior electronic conductivity impedes its further application. Here, nanofibers (nLICVO/NC) with In/Ce co-doped Li3VO4 strengthened by nitrogen-modified carbon are prepared. Density functional theory calculations demonstrate that In/Ce co-doping can substantially reduce the LVO band gap and achieve orders of magnitude increase (from 2.79 × 10-4 to 1.38 × 10-2 S cm-1) in the electronic conductivity of LVO. Moreover, the carbon-based nanofibers incorporated with 5LICVO nanoparticles can not only buffer the structural strain but also form a good framework for electron transport. This 5LICVO/NC material delivers high reversible capacities of 386.3 and 277.9 mA h g-1 at 0.1 and 5 A g-1, respectively. Furthermore, high discharge capacities of 335 and 259.5 mA h g-1 can be retained after 1200 and 4000 cycles at 0.5 and 1.6 A g-1, respectively (with the corresponding capacity retention of 98.4 and 78.7%, respectively). When the 5LICVO/NC anode assembles with commercial LiNi1/3Co1/3Mn1/3O2 (NCM111) into a full cell, a high discharge capacity of 191.9 mA h g-1 can be retained after 600 cycles at 1 A g-1, implying an inspiring potential for practical application in high-efficiency LIBs.
RESUMO
Supercapacitors have received much attention as large-scale energy storage devices for high power density and ultralong cycling life. In this work, sodium vanadate Na0.76V6O15/poly(3,4-ethylenedioxythiophene) (PEDOT) nanocables with deficient bridge oxygen at the interface (denoted Voâ¢â¢-PNVO) have been tailored for supercapacitors through the in situ polymerization of 3,4-ethylenedioxythiophene and studied using three different electrolytes. Experiments and theoretical calculations reveal that all Na+, Zn2+, and Al3+ ions appear as hydrates in aqueous solutions but insert into the crystal structure as Na+ ions and Zn2+-H2O and Al3+-H2O hydrates, respectively. In comparison with the Zn2+-H2O and Al3+-H2O hydrates, Na+ ions with a smaller radius diffuse more quickly in Voâ¢â¢-PNVO. Thus, Voâ¢â¢-PNVO delivers better charge storage capability and stability when an electrolyte with Na+ ions is used. The results strongly suggest that an electrostatic interaction is significant in determining transport properties and storage capacities, rather than hydrate radii or valence states.
RESUMO
Aqueous zinc metal batteries are noted for their cost-effectiveness, safety and environmental friendliness. However, the water-induced notorious issues such as continuous electrolyte decomposition and uneven Zn electrochemical deposition remarkably restrict the development of the long-life zinc metal batteries. In this study, zwitterionic sulfobetaine is introduced to copolymerize with acrylamide in zinc perchlorate (Zn(ClO4)2) solution. The designed gel framework with hydrophilic and charged groups can firmly anchor water molecules and construct ion migration channels to accelerate ion transport. The in situ generated hybrid interface, which is composed of the organic functionalized outer layer and inorganic Cl- containing inner layer, can synergically lower the mass transfer overpotential, reduce water-related side reactions and lead to uniform Zn deposition. Such a novel electrolyte configuration enables Zn//Zn cells with an ultra-long cycling life of over 3000 h and a low polarization potential (~ 0.03 V) and Zn//Cu cells with high Coulombic efficiency of 99.18% for 1000 cycles. Full cells matched with MnO2 cathodes delivered laudable cycling stability and impressive shelving ability. Besides, the flexible quasi-solid-state batteries which are equipped with the anti-vandalism ability (such as cutting, hammering and soaking) can successfully power the LED simultaneously. Such a safe, processable and durable hydrogel promises significant application potential for long-life flexible electronic devices.
RESUMO
Photocatalytic conversion of CO2 to high-value products plays a crucial role in the global pursuit of carbon-neutral economy. Junction photocatalysts, such as the isotype heterojunctions, offer an ideal paradigm to navigate the photocatalytic CO2 reduction reaction (CRR). Herein, we elucidate the behaviors of isotype heterojunctions toward photocatalytic CRR over a representative photocatalyst, g-C3N4. Impressively, the isotype heterojunctions possess a significantly higher efficiency for the spatial separation and transfer of photogenerated carriers than the single components. Along with the intrinsically outstanding stability, the isotype heterojunctions exhibit an exceptional and stable activity toward the CO2 photoreduction to CO. More importantly, by combining quantitative in situ technique with the first-principles modeling, we elucidate that the enhanced photoinduced charge dynamics promotes the production of key intermediates and thus the whole reaction kinetics.
RESUMO
Vanadium-based materials have been extensively studied as promising cathode materials for zinc-ion batteries because of their multiple valences and adjustable ion-diffusion channels. However, the sluggish kinetics of Zn-ion intercalation and less stable layered structure remain bottlenecks that limit their further development. The present work introduces potassium ions to partially substitute ammonium ions in ammonium vanadate, leading to a subtle shrinkage of lattice distance and the increased oxygen vacancies. The resulting potassium ammonium vanadate exhibits a high discharge capacity (464 mAh g-1 at 0.1 A g-1) and excellent cycling stability (90% retention over 3000 cycles at 5 A g-1). The excellent electrochemical properties and battery performances are attributed to the rich oxygen vacancies. The introduction of K+ to partially replace NH4+ appears to alleviate the irreversible deammoniation to prevent structural collapse during ion insertion/extraction. Density functional theory calculations show that potassium ammonium vanadate has a modulated electron structure and a better zinc-ion diffusion path with a lower migration barrier.