Effects of Block Copolymer Terminal Groups on Toughening Epoxy-Based Composites: Microstructures and Toughening Mechanisms.

Despite the considerable research attention paid to block copolymer (BCP)-toughened epoxy resins, the effects of their terminal groups on their phase structure are not thoroughly understood. This study fills this gap by closely examining the effects of amino and carboxyl groups on the fracture toughness of epoxy resins at different temperatures. Through the combination of scanning electron microscopy and digital image correlation (DIC), it was found that the amino-terminated BCP was capable of forming a stress-distributing network in pure epoxy resin, resulting in better toughening effects at room temperature. In a 60 wt.% silica-filled epoxy composite system, the addition of a carboxyl-terminated BCP showed little toughening effect due to the weaker filler/matrix interface caused by the random dispersion of the microphase of BCPs and distributed silica. The fracture toughness of the epoxy system at high temperatures was not affected by the terminal groups, regardless of the addition of silica. Their dynamic mechanical properties and thermal expansion coefficients are also reported in this article.

Facile Preparation of Monodisperse Cu@Ag Core-Shell Nanoparticles for Conductive Ink in Printing Electronics.

Copper-based nanoinks are emerging as promising low-cost alternatives to widely used silver nanoinks in electronic printing. However, the spontaneous oxidation of copper under ambient conditions poses significant challenges to its broader application. To address this issue, this paper presents an economical, large-scale, and environmentally friendly method for fabricating Cu@Ag nanoparticles (Cu@Ag NPs). The as-prepared nanoparticles exhibit a narrow size distribution of approximately 100 nm and can withstand ambient exposure for at least 60 days without significant oxidation. The Cu@Ag-based ink, with a 60 wt% loading, was screen-printed onto a flexible polyimide substrate and subsequently heat-treated at 290 °C for 15 minutes under a nitrogen atmosphere. The sintered pattern displayed a low electrical resistivity of 25.5 µΩ·cm (approximately 15 times the resistivity of bulk copper) along with excellent reliability and mechanical fatigue strength. The innovative Cu@Ag NPs fabrication method holds considerable potential for advancing large-scale applications of copper-based inks in flexible electronics.

Comparison of Different Cooling Schemes for AlGaN/GaN High-Electron Mobility Transistors.

Cooling is important for AlGaN/GaN high-electron mobility transistors (HEMTs) performance. In this paper, the advantages and disadvantages of the cooling performance of three cooling schemes: remote cooling (R-cool), near-chip cooling (NC-cool), and chip-embedded cooling (CE-cool) are compared. The influences of distinct geometric parameters and operating conditions on thermal resistance are investigated. The results show that the thermal resistances of NC-cool and CE-cool are almost the same as each other. Decreasing microchannel base thickness (hb) significantly increases the thermal resistance of CE-cool, and when its thickness is less than a critical value, NC-cool exhibits superior cooling performance than CE-cool. The critical thickness increases when decreasing the heat source pitch (Ph) and the convective heat transfer coefficient (hconv) or increasing the thermal conductivity of the substrate (λsub). Moreover, increasing Ph or λsub significantly improves the thermal resistance of three cooling schemes. Increasing hconv significantly decreases the thermal resistances of NC-cool and CE-cool while hardly affecting the thermal resistance of R-cool. The influence of the boundary thermal resistance (TBR) on the thermal resistance significantly increases at higher λsub and larger hconv.

Six-Degree-of-Freedom Posture Measurement Technologies Using Position Sensitive Detectors (PSDs): State of the Art.

Six degree-of-freedom (6-DOF) posture measurement is an important academic research topic which has been broadly applied in many fields. As a high-speed photoelectronic sensor with ultra-high resolution and precision, position sensitive detector (PSD) has shown to be one of the most competitive candidates in 6-DOF measurement. This review presents the research progress of PSD-based 6-DOF posture measurement systems in the field of large-scale equipment assembly, ultra-precision manufacturing and other emerging areas. A total of six methods for implementing 6-DOF measurement are summarized and their advantages and limitations are discussed. Meanwhile, the paper illustrates challenges, potential solutions and future development trends.

MicroRNA-877-5p Inhibits Cell Progression by Targeting FOXM1 in Lung Cancer.

Background: Many researches revealed that microRNAs (miRNAs) function as potential oncogene or tumor suppressor gene. As an antioncogene, miR-877-5p was reduced in many tumors. Objective: This research aimed to explore the biological role and mechanisms of miR-877-5p, which may help patients with non-small-cell lung cancer (NSCLC) find effective therapeutic targets. Methods: The downstream targets of miR-877-5p were predicted by Bioinformatics software. RT-qPCR and western blot were employed to analyze the gene levels. The impacts of miR-877-5p and FOXM1 were assessed by cell function experiments. Results: The miR-877-5p was reduced in NSCLC. In addition to this, it also inhibited cell progression of NSCLC cells in vitro. Moreover, the upregulation of FOXM1 expression restored the inhibitory effect of enhancement of miR-877-5p. Conclusions: Taken together, miR-877-5p inhibited cell progression by directly targeting FOXM1, which may provide potential biomarkers for targeted therapy of NSCLC.

Investigation of Warpage for Multi-Die Fan-Out Wafer-Level Packaging Process.

This paper focuses on characterizing the evolution of warpage, effects of epoxy molding compound (EMC), and effects of carrier 2 (the second carrier in the process) of 12 inch RDL-first multi-die fan-out wafer-level packaging (FOWLP) during the manufacturing process. The linear viscoelasticity properties of EMC and polyimide (PI) were characterized using dynamic mechanical analysis (DMA) in the frequency domain at different temperatures., The elastic and viscoelastic model were used for PI and EMC, the finite element analyses (FEA) of the cured structure were carried out and the results were compared with the test results. The viscoelastic properties of the EMC in the FEA could predict the wafer warpage more accurately. The FEA and experiments were used to investigate the evolution of warpage. The molding had a great influence on the warpage. The effects of the EMC and carrier 2 were also investigated with FEA. The wafer warpage could be reduced by lowering the thickness of the EMC, increasing the thickness of carrier 2, and selecting EMC and carrier 2 with a matched coefficient of thermal expansion (CTE).

Effect of Microstructure Refinement on Surface Morphology and Dynamic Mechanical Properties of W-Cu Alloys.

Two ultrafine-grained W-Cu alloys and two coarse-grained W-Cu alloys were prepared to study the effect of tungsten grain refinement on the interface characteristics between coating and W-Cu alloys. The experimental results show that in the coarse-grained W-Cu alloys, the tungsten phase near the surface is easy to form pits and cracks during impact loading, while the fine-grained tungsten alloy is not prone to this phenomenon. Simulations show that refining tungsten grains can not only reduce the impact absorption energy, but also increase the contact area of tungsten and copper phases, thereby reducing the fracture probability of tungsten phases and improving the dynamic mechanical properties of the W-Cu alloys under impact loading. The tested results show that the shear strength of gold studs on the coating is increased by about 33%, after grain refinement for the W-Cu alloys.

The SARS-CoV-2 B.1.618 variant slightly alters the spike RBD-ACE2 binding affinity and is an antibody escaping variant: a computational structural perspective.

Continuing reports of new SARS-CoV-2 variants have caused worldwide concern and created a challenging situation for clinicians. The recently reported variant B.1.618, which possesses the E484K mutation specific to the receptor-binding domain (RBD), as well as two deletions of Tyr145 and His146 at the N-terminal binding domain (NTD) of the spike protein, must be studied in depth to devise new therapeutic options. Structural variants reported in the RBD and NTD may play essential roles in the increased pathogenicity of this SARS-CoV-2 new variant. We explored the binding differences and structural-dynamic features of the B.1.618 variant using structural and biomolecular simulation approaches. Our results revealed that the E484K mutation in the RBD slightly altered the binding affinity through affecting the hydrogen bonding network. We also observed that the flexibility of three important loops in the RBD required for binding was increased, which may improve the conformational optimization and consequently binding of the new variant. Furthermore, we found that deletions of Tyr145 and His146 at the NTD reduced the binding affinity of the monoclonal antibody (mAb) 4A8, and that the hydrogen bonding network was significantly affected consequently. This data show that the new B.1.618 variant is an antibody-escaping variant with slightly altered ACE2-RBD affinity. Moreover, we provide insights into the binding and structural-dynamics changes resulting from novel mutations in the RBD and NTD. Our results suggest the need for further in vitro and in vivo studies that will facilitate the development of possible therapies for new variants such as B.1.618.

LncRNA LINC00857 regulates lung adenocarcinoma progression, apoptosis and glycolysis by targeting miR-1179/SPAG5 axis.

Long non-coding RNA (lncRNA), a member of non-coding RNA family with over 200 nucleotides in length, typically serves as an oncogene or tumor suppressor in tumor progression, such as cancer cell proliferation, apoptosis and glycolysis. Recent studies manifested lncRNA LINC00857 was involved in cell cycle regulation of lung cancer. Due to complicated networks in tumorigenesis, the potential roles of LINC00857 underlying lung cancer progression still need further investigation. In this study, we explored the expression of LINC00857 in lung adenocarcinoma (LUAD) tissues and LUAD cell lines and found a dramatical upregulation of LINC00857 compared with the adjacent normal lung tissues and BEAS-2B cell line, respectively. Then, LINC00857 knockdown led to the cell proliferation and glycolysis was repressed, while the apoptosis was elevated in LUAD cell lines. Furthermore, we identified a direct interaction between LINC00857 and miR-1179 in LUAD cells using bioinformatic method and report assay. Finally, we evidenced LINC00857 promoted cell growth and glycolysis and repressed apoptosis via sponging miR-1179 and further regulating sperm-associated antigen 5 (SPAG5) expression in LUAD cell lines. Hence, our results authenticated that lncRNA LINC00857 regulated the cell proliferation, glycolysis and apoptosis of LUAD cells mainly through targeting the miR-1179/SPAG5 axis, which might be a novel insight into lung cancer progression and provided a potential target for clinical treatment of LUAD patients.

20 kW class high-beam-quality CW laser amplifier chain based on a Yb:YAG slab at room temperature.

A continuous-wave-operation laser amplifier chain consisting of three multi-concentration-doped Yb:YAG slab gain modules (GMs) at room temperature is presented. The output power of 22.3 kW with the beam quality of 3.3 times the diffraction limit is achieved from this chain. To the best of our knowledge, based on a Yb:YAG slab at room temperature, the highest power to date while maintaining excellent beam quality laser output. An extraction efficiency of 36% from the single slab GM is obtained and can be further enhanced to 46% by optimizing the parameters of GM. These results have confirmed that the Yb:YAG slab has an excellent scaling performance and is suitable for the development of high-average-power lasers.

One-Step Dipping Method for Covalently Grafting Polymer Films onto a Si Surface from Aqueous Media.

A facile and one-pot dipping method was proposed in this article for the first time to prepare vinylic polymer films on a silicon (Si) surface. This novel process was conducted in acidic aqueous media containing 4-nitrobenzene diazonium (NBD) tetrafluoroborate, hydrofluoric acid (HF), and vinylic monomers at room temperature in the open air and without any apparatus requirement. The formation of the polyvinyl film was confirmed by corroborating evidence from ellipsometry, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and atomic force microscope (AFM) analysis. The results revealed that both polymers of poorly water soluble methyl methacrylate (MMA) and water-soluble acrylic acid (AA) monomers were covalently grafted onto the Si surface via this simple process. The polyvinyl film was composed of polynitrophenyl (PNP) and polyvinyl, where PNP was doped into polyvinyl chains throughout the entire film. From a mechanistic point of view, the simple dipping method took advantage of the ability of the NBD cation to be spontaneously reduced at the Si surface at open circuit potential, providing aryl radicals. These radicals can be covalently bonded to the Si surface to form the PNP primer layer. Although the PNP sublayer was thinner and difficult to detect, it was necessary to graft polyvinyl chains. Furthermore, the aryl radicals were used to initiate the polymerization of vinylic monomers. The radical-terminated polyvinyl chains formed in the solution were then added to the aromatic rings of the primer layer to form the expected polyvinyl film.

[Correlation between Chlamydia pneumoniae infection and chronic obstructive pulmonary disease].

OBJECTIVE: To investigate the correlation between Chlamydia pneumonia (Cpn) infection and chronic obstructive pulmonary disease (COPD). METHODS: 82 patients with acute exacerbation COPD (AE-COPD) or stabilized COPD patients at outpatient visits, in the People's Hospital of Jiangyin city from Aug. 2010 to May 2012, together with 46 cases having stationary phase COPD and 38 healthy volunteers as control group, were involved in this study. Patients were bled 2 ml, on the next day of hospitalization while patients at emergency room were bled 2 ml immediately, but bled again on the 15(th) day. Serum was separated through cryopreservation and the Cpn antibodies (IgG, IgM and IgA antibodies) were detected, under micro-immunofluorescence. RESULTS: In terms of IgG in the three groups, the positive rates did not show significant differences (P > 0.05) but the GMT of the IgG in the AE-COPD group was significantly higher (P < 0.01) than that in the control group. IgA positive rate among the three groups; AE-COPD appeared the highest. There was no significant difference between the AE-COPD group and stationary phase COPD group (P > 0.05), however, there were significant differences between the AE-COPD group, the stationary phase COPD group and the control group (P < 0.01). In terms of GMT of IgA in the three groups, there was significant difference between the AE-COPD group and stationary phase COPD group (P > 0.05), but with significant difference between the AE-COPD group and the control group (P > 0.01). There was significant difference between stationary phase COPD group and the control group (P > 0.05). When comparing both the rates of acute infection and chronic infection on the AE-COPD groups with the control group, there appeared significant differences (P < 0.05, P < 0.01). When comparing the acute and chronic infection between the stationary phase COPD group and the control group, the rate of acute infection did not show significant difference (P > 0.05) while the chronic infection rate appear to have had significant difference (P < 0.01). CONCLUSION: Cpn infection seemed to be closely related to the development of COPD.

Probing the function of nucleotides in the catalytic cores of the 8-17 and 10-23 DNAzymes by abasic nucleotide and C3 spacer substitutions.

8-17 and 10-23 are the two most comprehensively studied RNA-cleaving DNAzymes to date and have the ability to carry out sequence-specific cleavage of both all-RNA or chimeric RNA/DNA substrates. Mutagenesis studies of 8-17 and 10-23 DNAzymes using alternative natural nucleotides to substitute a given nucleotide in the DNAzyme sequence have found that both DNAzymes are able to tolerate a variety of alterations at many sequence locations. Chemical modification studies employing nucleotides containing nonnatural nucleobases have led to findings that some specific entities of selected nucleobases are irreplaceable by other functional groups. In this work, we set out to carry out a mutagenesis study on both 8-17 and 10-23 by substituting individual nucleotides in their catalytic cores with a baseless (abasic) nucleotide or a baseless/sugarless nucleotide containing only acyclic C3 spacer. We observed that the substitution with an abasic nucleotide or C3 spacer at many locations within the catalytic core of both 8-17 and 10-23 was still able to support a significant level of catalytic activity of each DNAzyme, suggesting that both DNAzymes have considerable structural plasticity to maintain their catalytic functions. We also observed that almost all nucleobases in the catalytic core of each DNAzyme appeared to make either an absolutely essential contribution to the function of each DNAzyme or exhibit a "chaperone-like" activity that is important for the optimal function of each DNAzyme; in contrast, only one sugar ring in 8-17 and four in 10-23 were inferred to make some contribution to the optimal function of the relevant DNAzyme. Finally, our study also raised a possibility that the 10-23 DNAzyme might be a special structural variant of the larger 8-17 DNAzyme family.