Edge Graphitized Oxygen-Rich Carbon Based on Stainless Steel-Assisted High-energy Ball Milling for High-Capacity and Ultrafast Sodium Storage.

Oxygen doping is an effective strategy for constructing high-performance carbon anodes in Na ion batteries; however, current oxygen-doped carbons always exhibit low doping levels and high-defect surfaces, resulting in limited capacity improvement and low initial Coulombic efficiency (ICE). Herein, a stainless steel-assisted high-energy ball milling is exploited to achieve high-level oxygen doping (19.33%) in the carbon framework. The doped oxygen atoms exist dominantly in the form of carbon-oxygen double bonds, supplying sufficient Na storage sites through an addition reaction. More importantly, it is unexpected that the random carbon layers on the surface are reconstructed into a quasi-ordered arrangement by robust mechanical force, which is low-defect and favorable for suppressing the formation of thick solid electrolyte interfaces. As such, the obtained carbon presents a large reversible capacity of 363 mAh g-1 with a high ICE up to 83.1%. In addition, owing to the surface-dominated capacity contribution, an ultrafast Na storage is achieved that the capacity remains 139 mAh g-1 under a large current density of 100 A g-1 . Such good Na storage performance, especially outstanding rate capability, has rarely been achieved before.

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries.

A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.