Unlocking the Potential of Nanoribbon-Based Sb2S3/Sb2Se3 van-der-Waals Heterostructure for Solar-Energy-Conversion and Optoelectronics Applications.

High-performance nanosized optoelectronic devices based on van der Waals (vdW) heterostructures have significant potential for use in a variety of applications. However, the investigation of nanoribbon-based vdW heterostructures are still mostly unexplored. In this study, based on first-principles calculations, we demonstrate that a Sb2S3/Sb2Se3 vdW heterostructure, which is formed by isostructural nanoribbons of stibnite (Sb2S3) and antimonselite (Sb2Se3), possesses a direct band gap with a typical type-II band alignment, which is suitable for optoelectronics and solar energy conversion. Optical absorption spectra show broad profiles in the visible and UV ranges for all of the studied configurations, indicating their suitability for photodevices. Additionally, in 1D nanoribbons, we see sharp peaks corresponding to strongly bound excitons in a fashion similar to that of other quasi-1D systems. The Sb2S3/Sb2Se3 heterostructure is predicted to exhibit a remarkable power conversion efficiency (PCE) of 28.2%, positioning it competitively alongside other extensively studied two-dimensional (2D) heterostructures.

CO adsorption on MgO thin-films: formation and interaction of surface charged defects.

Two-dimensional (2D) materials formed by thin-films of metal oxides that grow on metal supports are commonly used in heterogeneous catalysis and multilayer electronic devices. Despite extensive research on these systems, the effects of charged defects at supported oxides on surface processes are still not clear. In this work, we perform spin-polarized density-functional theory (DFT) calculations to investigate formation and interaction of charged magnesium and oxygen vacancies, and Al dopants on MgO(001)/Ag(001) surface. The results show a sizable interface compressive effect that decreases the metal work function as electrons are added on the MgO surface with a magnesium vacancy. This surface displays a larger formation energy in a water environment (O-rich condition) even with additional Al-doping. Under these conditions, we found that a polar molecule such as CO is more strongly adsorbed on the low-coordination oxygen sites due to a larger contribution of the channeled electronic transport with the silver interface regardless of the surface charge. Therefore, these findings elucidate how surface intrinsic vacancies can influence or contribute to charge transfer, which allows one to explore more specific reactions at different surface topologies for more efficient catalysts for CO2 conversion.

Improved Performance of Organic Light-Emitting Transistors Enabled by Polyurethane Gate Dielectric.

Organic light-emitting transistors (OLETs) are multifunctional optoelectronic devices that combine in a single structure the advantages of organic light-emitting diodes (OLEDs) and organic field-effect transistors (OFETs). However, low charge mobility and high threshold voltage are critical hurdles to practical OLET implementation. This work reports on the improvements obtained by using polyurethane films as a dielectric layer material in place of the standard poly(methyl methacrylate) (PMMA) in OLET devices. It was found that polyurethane drastically reduces the number of traps in the device, thereby improving electrical and optoelectronic device parameters. In addition, a model was developed to rationalize an anomalous behavior at the pinch-off voltage. Our findings represent a step forward to overcome the limiting factors of OLETs that prevent their use in commercial electronics by providing a simple route for low-bias device operation.

How lignin sticks to cellulose-insights from atomic force microscopy enhanced by machine-learning analysis and molecular dynamics simulations.

Elucidating cellulose-lignin interactions at the molecular and nanometric scales is an important research topic with impacts on several pathways of biomass valorization. Here, the interaction forces between a cellulosic substrate and lignin are investigated. Atomic force microscopy with lignin-coated tips is employed to probe the site-specific adhesion to a cellulose film in liquid water. Over seven thousand force-curves are analyzed by a machine-learning approach to cluster the experimental data into types of cellulose-tip interactions. The molecular mechanisms for distinct types of cellulose-lignin interactions are revealed by molecular dynamics simulations of lignin globules interacting with different cellulose Iß crystal facets. This unique combination of experimental force-curves, data-driven analysis, and molecular simulations opens a new approach of investigation and updates the understanding of cellulose-lignin interactions at the nanoscale.

Stability and Rupture of an Ultrathin Ionic Wire.

Using a combination of in situ high-resolution transmission electron microscopy and density functional theory, we report the formation and rupture of ZrO_{2} atomic ionic wires. Near rupture, under tensile stress, the system favors the spontaneous formation of oxygen vacancies, a critical step in the formation of the monatomic bridge. In this length scale, vacancies provide ductilelike behavior, an unexpected mechanical behavior for ionic systems. Our results add an ionic compound to the very selective list of materials that can form monatomic wires and they contribute to the fundamental understanding of the mechanical properties of ceramic materials at the nanoscale.

Structural Metastability and Fermi Surface Topology of SrAl2Si2.

SrAl2Si2 crystallizes into either a semimetallic, CaAl2Si2-type, α phase or a superconducting, BaZn2P2-type, ß phase. We explore possible α→Pc,⁡Tcß transformations by employing pressure- and temperature-dependent free-energy calculations, vibrational spectral calculations, and room-temperature synchrotron powder X-ray diffraction (PXRD) measurements up to 14 GPa using a diamond anvil cell. Our theoretical and empirical analyses together with all reported baric and thermal events on both phases allow us to construct a preliminary P-T diagram of transformations. Our calculations show a relatively low critical pressure for the α-to-ß transition (4.9 GPa at 0 K, 5.0 GPa at 300 K, and 5.3 GPa at 900 K); nevertheless, our nonequilibrium analysis indicates that the low-pressure low-temperature α phase is separated from a metastable ß phase by a relatively high activation barrier. This analysis is supported by our PXRD data at ambient temperature and P ≤ 14 GPa, which shows an absence of the ß phase even after a compression involving three times the critical pressure. Finally, we briefly consider the change in the Fermi surface topology when atomic rearrangement takes place via either transformations among SrAl2Si2 dimorphs or total chemical substitution of Ca by Sr in the isomorphous CaAl2Si2 α phase; empirically, the manifestation of such a topology modification is evident upon comparison of the evolution of the (magneto)transport properties of members of SrAl2Si2 dimorphs and α isomorphs.

Reorganization Energy upon Controlled Intermolecular Charge-Transfer Reactions in Monolithically Integrated Nanodevices.

Intermolecular electron-transfer reactions are key processes in physics, chemistry, and biology. The electron-transfer rates depend primarily on the system reorganization energy, that is, the energetic cost to rearrange each reactant and its surrounding environment when a charge is transferred. Despite the evident impact of electron-transfer reactions on charge-carrier hopping, well-controlled electronic transport measurements using monolithically integrated electrochemical devices have not successfully measured the reorganization energies to this date. Here, it is shown that self-rolling nanomembrane devices with strain-engineered mechanical properties, on-a-chip monolithic integration, and multi-environment operation features can overcome this challenge. The ongoing advances in nanomembrane-origami technology allow to manufacture the nCap, a nanocapacitor platform, to perform molecular-level charge transport characterization. Thereby, employing nCap, the copper-phthalocyanine (CuPc) reorganization energy is probed, ≈0.93 eV, from temperature-dependent measurements of CuPc nanometer-thick films. Supporting the experimental findings, density functional theory calculations provide the atomistic picture of the measured CuPc charge-transfer reaction. The experimental strategy demonstrated here is a consistent route towards determining the reorganization energy of a system formed by molecules monolithically integrated into electrochemical nanodevices.

Franckeite as an Exfoliable Naturally Occurring Topological Insulator.

Franckeite is a natural superlattice composed of two alternating layers of different composition which has shown potential for optoelectronic applications. In part, the interest in franckeite lies in its layered nature which makes it easy to exfoliate into very thin heterostructures. Not surprisingly, its chemical composition and lattice structure are so complex that franckeite has escaped screening protocols and high-throughput searches of materials with nontrivial topological properties. On the basis of density functional theory calculations, we predict a quantum phase transition originating from stoichiometric changes in one of franckeite composing layers (the quasihexagonal one). While for a large concentration of Sb, franckeite is a sequence of type-II semiconductor heterojunctions, for a large concentration of Sn, these turn into type-III, much alike InAs/GaSb artificial heterojunctions, and franckeite becomes a strong topological insulator. Transmission electron microscopy observations confirm that such a phase transition may actually occur in nature.

Oxygen effects on the electronic transport in stanene.

In this work, we study theoretically the structural, electronic and transport properties of oxidized stanene using a combination of density functional theory (DFT), quantum molecular dynamics and the Landauer-Büttiker theory for the ballistic transport. Our results clearly show that oxygen adsorb onto stanene surface in both molecular or atomic forms, thus causing considerable modifications to its electronic structure and transport properties. Nevertheless, our quantum conductance calculations reveal that, in spite of oxidation, stanene still remains a good conductor that might be applied as field effect transistors, gas sensors and other devices.

Structural and magnetic properties of a defective graphene buffer layer grown on SiC(0001): a DFT study.

Understanding the role of defects in the magnetic properties of the graphene buffer layer (BL) grown on substrates should be important to provide hints for manufacturing future graphene-based spintronic devices in a controlled fashion. Herein, density functional theory was applied to assess the structure and magnetic properties of defective BL on 6H-SiC(0001). Particularly, we conducted a thorough study of one and two vacancies and Stone-Wales defects in the BL. Our results reveal that the removal of a carbon atom in the BL framework that was originally bonded to a Si atom in the substrate is preferred over that of a sp2-bonded atom. As a result, a hexacoordinated silicon atom is formed with a slightly deviated octahedral geometry. A stable antiferromagnetic (AF) state was verified for the single vacancy system, with a quite different spin-density distribution to the one obtained for the perfect BL. Also, this AF state is nearly degenerate with the non-magnetic and low magnetic states. As for the Stone-Wales defect, the AF sate is almost degenerate with the most stable M = 2 µB magnetic configuration. However, the introduction of two vacancies in the carbon network of BL causes the loss of magnetism of the BL-SiC system. Our theoretical calculations support experimental predictions favoring the BL as the site for single vacancy formation rather than the epitaxial monolayer graphene, by 4.3 eV.

Pressure dependence of room-temperature structural properties of CaAl2Si2.

We investigated the pressure dependence of the crystal structure of CaAl2Si2 by means of ab initio calculations and room-temperature synchrotron x-ray powder diffraction. Ab initio calculations reproduce satisfactorily the experimentally observed pressure-dependent structural evolution up to 3 GPa where the title system remains in the trigonal [Formula: see text] phase. In the pressure range 3-8 GPa, pressure evolution of the calculated in-plane lattice parameters is steeper than the observed. Ab initio calculations predict a structural phase transition to a tetragonal phase ([Formula: see text] to I4/mmm) near 7.5 GPa for zero (or room) temperature. Temperature effects are included through calculation of vibrational properties (phonon spectra). These calculations confirm that both phases are either globally or locally stable (metastable) and allow for the construction of a P - T phase diagram for this system. However, our experiments show no sign of such a transition up to 12 GPa. Such a discrepancy can be explained if one considers the trigonal ([Formula: see text]) structure to be metastable above the critical pressure, but is separated from the predicted tetragonal (I4/mmm) structure by a relatively high energy barrier. The applied pressure alone may not be able to surpass the energy-barrier; rather a joint high-pressure and high-temperature (HPHT) treatment may lead to it. However, empirical verification of such a hypothetical transition may be hampered by the chemistry of CaAl2Si2 system which shows tendency to decompose peritectically into Ca2Al3Si4 and aluminum under HPHT treatment.

Flat bands and gaps in twisted double bilayer graphene.

We present electronic structure calculations of twisted double bilayer graphene (TDBG): a tetralayer graphene structure composed of two AB-stacked graphene bilayers with a relative rotation angle between them. Using first-principles calculations, we find that TDBG is semiconducting with a band gap that depends on the twist angle, that can be tuned by an external electric field. The gap is consistent with TDBG symmetry and its magnitude is related to surface effects, driving electron transfer from outer to inner layers. The surface effect competes with an energy upshift of localized states at inner layers, giving rise to the peculiar angle dependence of the band gap, which reduces at low angles. For these low twist angles, the TDBG develops flat bands, in which electrons in the inner layers are localized at the AA regions, as in twisted bilayer graphene.

Spiro-Carbon: A Metallic Carbon Allotrope Predicted from First Principles Calculations.

A structurally stable microporous metallic carbon allotrope, poly(spiro[2.2]penta-1,4-diyne) or, for short, spiro-carbon, with I41 /amd (D4h ) symmetry is predicted by first-principles calculations using density functional theory (DFT). The calculations of electronic, vibrational, and structural properties show that spiro-carbon has lower relative energy than other elusive carbon allotropes such as T-Carbon and 1-diamondyne (Y-Carbon). Its structure can be pictured as a set of trans-cisoid-polyacetylene chains tangled and interconnected together by sp3 carbon atoms. Calculations reveal a metallic electronic structure arising from an "intrinsic doping" of trans-cisoid-polyacetylene chains with sp3 carbon atoms. Possible synthetic routes and various simulated spectra (XRD, NMR, and IR absorption) are provided in order to guide future efforts to synthesize this novel material.

Layer breathing and shear modes in multilayer graphene: a DFT-vdW study.

In this work, we study structural and vibrational properties of multilayer graphene using density-functional theory with van der Waals (vdW) functionals. Initially, we analyze how different vdW functionals compare by evaluating the lattice parameters, elastic constants and vibrational frequencies of low energy optical modes of graphite. Our results indicate that the vdW-DF1-optB88 functional has the best overall performance on the description of vibrational properties. Next, we use this functional to study the influence of the vdW interactions on the structural and vibrational properties of multilayer graphene. Specifically, we evaluate binding energies, interlayer distances and phonon frequencies of layer breathing and shear modes. We observe excellent agreement between our calculated results and available experimental data, which suggests that this functional has truly predictive power for layer-breathing and shear frequencies that have not been measured yet. This indicates that careful selected vdW functionals can describe interlayer bonding in graphene-related systems with good accuracy.

Linear magnetoresistivity in layered semimetallic CaAl2Si2.

According to an earlier Abrikosov model, a positive, nonsaturating, linear magnetoresistivity (LMR) is expected in clean, low-carrier-density metals when measured at very low temperatures and under very high magnetic fields. Recently, a vast class of materials were shown to exhibit extraordinary high LMR but at conditions that deviate sharply from the above-mentioned Abrikosov-type conditions. Such deviations are often considered within either classical Parish-Littlewood scenario of random-conductivity network or within a quantum scenario of small-effective mass or low carriers at tiny pockets neighboring the Fermi surface. This work reports on a manifestation of novel example of a robust, but moderate, LMR up to ∼100 K in the diamagnetic, layered, compensated, semimetallic CaAl2Si2. We carried out extensive and systematic characterization of baric and thermal evolution of LMR together with first-principles electronic structure calculations based on density functional theory. Our analyses revealed strong correlations among the main parameters of LMR and, in addition, a presence of various transition/crossover events based on which a P - T phase diagram was constructed. We discuss whether CaAl2Si2 can be classified as a quantum Abrikosov or classical Parish-Littlewood LMR system.

Giant and Tunable Anisotropy of Nanoscale Friction in Graphene.

The nanoscale friction between an atomic force microscopy tip and graphene is investigated using friction force microscopy (FFM). During the tip movement, friction forces are observed to increase and then saturate in a highly anisotropic manner. As a result, the friction forces in graphene are highly dependent on the scanning direction: under some conditions, the energy dissipated along the armchair direction can be 80% higher than along the zigzag direction. In comparison, for highly-oriented pyrolitic graphite (HOPG), the friction anisotropy between armchair and zigzag directions is only 15%. This giant friction anisotropy in graphene results from anisotropies in the amplitudes of flexural deformations of the graphene sheet driven by the tip movement, not present in HOPG. The effect can be seen as a novel manifestation of the classical phenomenon of Euler buckling at the nanoscale, which provides the non-linear ingredients that amplify friction anisotropy. Simulations based on a novel version of the 2D Tomlinson model (modified to include the effects of flexural deformations), as well as fully atomistic molecular dynamics simulations and first-principles density-functional theory (DFT) calculations, are able to reproduce and explain the experimental observations.

Effects of edge magnetism on the Kohn anomalies of zigzag graphene nanoribbons.

The effects of edge magnetism on the Kohn anomaly (KA) of the G-band phonons of zigzag graphene nanoribbons (ZGNRs) are studied using a combination of the tight-binding and mean-field Hubbard models. We show that the opening of an energy gap, induced by magnetic ordering, significantly changes the KA effects, particularly for narrow ribbons in which the gap is larger than the phonon energy. Therefore, the G-band phonon frequency and lifetime are altered for a magnetically-ordered edge state with respect to an unpolarized edge state. The effects of temperature, ZGNR width, doping and transverse electric fields are systematically investigated. We propose using this effect to probe the magnetic order of edge states in graphene nanoribbons using Raman spectroscopy.

Electronic and structural properties of vacancies and hydrogen adsorbates on trilayer graphene.

Using ab initio calculations, we study the electronic and structural properties of vacancies and hydrogen adsorbates on trilayer graphene. Those defects are found to share similar low-energy electronic features, since they both remove a p(z) electron from the honeycomb lattice and induce a defect level near the Fermi energy. However, a vacancy also leaves unpaired σ electrons on the lattice, which lead to important structural differences and also contribute to magnetism. We explore both ABA and ABC stackings and compare properties such as formation energies, magnetic moments, spin density and the local density of states (LDOS) of the defect levels. These properties show a strong sensitivity to the layer in which the defect is placed and smaller sensitivities to sublattice placing and stacking type. Finally, for the ABC trilayer, we also study how these states behave in the presence of an external field, which opens a tunable gap in the band structure of the non-defective system. The p(z) defect states show a strong hybridization with band states as the field increases, with reduction and eventually loss of magnetization, and a non-magnetic, midgap-like state is found when the defect is at the middle layer.

Chemical analysis and molecular models for calcium-oxygen-carbon interactions in black carbon found in fertile Amazonian anthrosoils.

Carbon particles containing mineral matter promote soil fertility, helping it to overcome the rather unfavorable climate conditions of the humid tropics. Intriguing examples are the Amazonian Dark Earths, anthropogenic soils also known as "Terra Preta de Índio'' (TPI), in which chemical recalcitrance and stable carbon with millenary mean residence times have been observed. Recently, the presence of calcium and oxygen within TPI-carbon nanoparticles at the nano- and mesoscale ranges has been demonstrated. In this work, we combine density functional theory calculations, scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, Fourier transformed infrared spectroscopy, and high resolution X-ray photoelectron spectroscopy of TPI-carbons to elucidate the chemical arrangements of calcium-oxygen-carbon groups at the molecular level in TPI. The molecular models are based on graphene oxide nanostructures in which calcium cations are strongly adsorbed at the oxide sites. The application of material science techniques to the field of soil science facilitates a new level of understanding, providing insights into the structure and functionality of recalcitrant carbon in soil and its implications for food production and climate change.

Magnetic response of zigzag nanoribbons under electric fields.

Spin excitations in zigzag graphene nanoribbons are studied when the system is subjected to an electric field in the transversal direction. The magnetic properties and the lifetime of the spin excitations are systematically investigated and compared using a tight-binding electron-electron model treated by a mean-field Hubbard model. The effects of electron-hole asymmetry introduced by next-nearest neighbor hopping are also investigated. We show that by increasing the electric field, the antiferromagnetic correlations between the edges of the nanoribbons are decreased due to a reduction of the magnetic moments. The results show that the spin wave lifetime may be controlled by the intensity of the transversal electric field, indicating that zigzag nanoribbons may be considered great candidates for future spintronic applications.