Response of two Salmonella enterica strains inoculated in model cheese treated with high hydrostatic pressure.

The aim of this work was to determine the response to high hydrostatic pressure and the ability for survival, recovery, and growth of 2 strains of Salmonella enterica (Salmonella enteritidis and Salmonella typhimurium) inoculated in a washed-curd model cheese produced with and without starter culture. Inoculated samples were treated at 300 and 400 MPa for 10 min at room temperature and analyzed after treatment and after 1, 7, and 15 d of storage at 12 degrees C to study the behavior of the Salmonella population. Cheese samples produced with starter culture and treated at 300 and 400 MPa showed maximum lethality; no significant differences in the baroresistant behavior of both strains were detected. Nevertheless, when starter culture was not present, the maximum lethality was only observed in cheese samples treated at 400 MPa, in the case of S. enteritidis. Ability to repair and grow was not observed in model cheese produced with starter culture and cell counts of treated samples decreased after 15 d of storage at 12 degrees C. In cheese produced without starter culture, Salmonella cells showed the ability to repair and grow during the storage period, reaching counts over 3 log(10) (cfu/mL) in both applied treatments and serotypes. These results suggest that high hydrostatic pressure treatments are effective to reduce Salmonella population in this type of cheese, but the presence of the starter culture affects the ability of this microorganism to repair and grow during the storage period.

Comparison of heat and pressure treatments of skim milk, fortified with whey protein concentrate, for set yogurt preparation: effects on milk proteins and gel structure.

Heat (85 degrees C for 20 min) and pressure (600 MPa for 15 min) treatments were applied to skim milk fortified by addition of whey protein concentrate. Both treatments caused > 90 % denaturation of beta-lactoglobulin. During heat treatment this denaturation took place in the presence of intact casein micelles; during pressure treatment it occurred while the micelles were in a highly dissociated state. As a result micelle structure and the distribution of beta-lactoglobulin were different in the two milks. Electron microscopy and immunolabelling techniques were used to examine the milks after processing and during their transition to yogurt gels. The disruption of micelles by high pressure caused a significant change in the appearance of the milk which was quantified by measurement of the colour values L*, a* and b*. Heat treatment also affected these characteristics. Casein micelles are dynamic structures, influenced by changes to their environment. This was clearly demonstrated by the transition from the clusters of small irregularly shaped micelle fragments present in cold pressure-treated milk to round, separate and compact micelles formed on warming the milk to 43 degrees C. The effect of this transition was observed as significant changes in the colour indicators. During yogurt gel formation, further changes in micelle structure, occurring in both pressure and heat-treated samples, resulted in a convergence of colour values. However, the microstructure of the gels and their rheological properties were very different. Pressure-treated milk yogurt had a much higher storage modulus but yielded more readily to large deformation than the heated milk yogurt. These changes in micelle structure during processing and yogurt preparation are discussed in terms of a recently published micelle model.

High-pressure processing applied to cooked sausages: bacterial populations during chilled storage.

Vacuum-packaged cooked sausages were pressurized at 500 MPa for 5 or 15 min at mild temperature (65 degrees C) and later stored at 2 and 8 degrees C for 18 weeks. Counts of aerobic mesophiles and psychrotrophs, lactic acid bacteria, enterobacteria, Baird-Parker microbiota, and Listeria spp. were determined 1 day and 3, 6, 9, 12, 15, and 18 weeks after treatment and compared with those of cooked sausages treated at 80 to 85 degrees C for 40 min. Pressurization generated reductions of about 4 log CFU/g in psychrotrophs and lactic acid bacteria. Enterobacteria and Listeria proved the most pressure sensitive; insignificant or no growth was detected throughout the study. Heat treatment inactivated psychrotrophs and enterobacteria similarly to pressure treatment. Listeria monocytogenes and enterotoxigenic Staphylococcus aureus were not found in treated samples. In general, there was no significant difference in counts of any bacterial populations either among treatments or between storage temperatures. High-pressure processing at mild temperature is an effective preservation method that can replace heat pasteurization applied to some cooked meat and poultry products after packaging.

Pressure- vs. heat-induced bacterial stress in cooked poultry sausages: a preliminary study.

Vacuum-packaged poultry cooked sausages were pressure-treated at 500 MPa by combinations of time (5-45 min) and temperature (2-80 degrees C) and later stored at 6-8 degrees C for 12 we. Mesophile and psychrotrophe counts were determined 1 d, 3, 6, 9 and 12 we after treatment and compared with those of cooked sausages pasteurized at 80-85 degrees C for 40 min. Both pressure and heat treatments offer great possibilities for preservation. Sausages pressurized at 65 degrees C for 15 min showed mesophile numbers below 2 log cfu g(-1) throughout the chill storage. Pressurization, unlike heat treatment, causes a reversible bacterial stress. Thus, injured cells recovered during storage and, at 6 and 12 we, after a temperature abuse (room temperature for approx. 24 h), counts increased up to 6.5 - 7.5 log units. Psychrotrophes were more sensitive to both treatments; no growth was detected the day after (a lethality of more than 4 log units).

Mechanically recovered poultry meat sausages manufactured with high hydrostatic pressure.

The effect of high pressure processing at high temperature on texture and color of frankfurter-type sausages made with different contents of mechanically recovered poultry meat (MRPM) was evaluated and compared with that of a standard cooking process. Five types of sausages containing 100, 75, 50, 25, and 0% MRPM and 0, 25, 50, 75, and 100% of minced pork meat (MPM), respectively, were manufactured. They were pressurized at 500 MPa for 30 min at 50, 60, 70, and 75 C or cooked at 75 C for 30 min. Pressure-treated sausages were less springy and firm, but more cohesive. Moreover, color of pressurized sausages was lighter and more yellow than that of conventionally cooked sausages. Addition of MPM increased cohesiveness, hardness, and force at 80% compression. Minced pork meat also caused the appearance of sausages to be lighter, less red, and less yellow. Cooked sausages made with MRPM can have an attractive appearance and texture via high pressure processing.

Listeria innocua and aerobic mesophiles during chill storage of inoculated mechanically recovered poultry meat treated with high hydrostatic pressure.

Mechanically recovered poultry meat (MRPM) was inoculated with Listeria innocua 910 CECT at a level of approximately 10(8) CFU g(-1). Vacuum-packaged samples were treated by combinations of pressure (350, 400, 450 and 500 MPa), time (5, 10, 15 and 30 min) and temperature (2, 10 and 20°C) and later stored at 2°C for 2 months. Counts of L. innocua and aerobic mesophilic bacteria were determined 1, 4, 7, 15, 30 and 60 days after pressurisation. For mesophiles, in most treatments, pressurization at 2°C gave the significantly best results. High pressure caused a marked bactericidal effect on L. innocua: reductions higher than 7.5 log units were achieved in several cases. Some cells were just sublethally injured by pressure. Samples treated at 500 MPa for 30 min at 2°C had counts of only 2.3 log units after 60 days of chill storage. Noninoculated pressurised MRPM did not show Listeria growth throughout storage. These results suggest that high pressure processing can enhance the microbiological quality of MRPM.

Effect of high hydrostatic pressure on Listeria innocua 910 CECT inoculated into Ewe's milk.

Ewe's milk standardized to 6% fat was inoculated with Listeria innocua 910 CECT at a concentration of 10(7)CFU/ml and treated by high hydrostatic pressure. Treatments consisted of combinations of pressure (200, 300, 350, 400, 450, and 500 MPa), temperature (2, 10, 25, and 50 degrees C), and time (5, 10, and 15 min). To determine numbers of L. innocua, listeria selective agar base with listeria selective supplement and plate count agar was used. Low-temperature (2 degrees C) pressurizations produced higher L. innocua inactivation than treatments at room temperatures (25 degrees C). Pressures between 450 and 500 MPa for 10 to 15 min were needed to achieve reductions of 7 to 8 log units. The kinetics of destruction of L. innocua were first order with D-values of 3.12 min at 2 degrees C and 400 MPa and 4 min at 25 degrees C and 400 MPa. A baroprotective effect of ewe's milk (6% fat) on L. innocua was observed in comparison with other studies using different media and similar pressurization conditions.

Enzymatic condensation of cholecystokinin CCK-8 (4-6) and CCK-8 (7-8) peptide fragments in organic media.

The kinetically controlled condensation reaction of Z-Gly-Trp-Met-OR(1) (R(1): Et, Al, Cam) and H-Asp-(OR(2))-Phe-NH(2) (R(2): H, Bu(t)) catalyzed by alpha-chymotrypsin deposited onto polyamide in organic media was studied. The effect of the drying process of the enzyme-support preparation, substrate concentrations, reaction medium, acyl donor, and nucleophile structure on both enzymatic activity and pentapeptide yield was investigated. The immobilized preparation directly equilibrated at a(w) = 0.113, gave higher enzymatic activities than dried with vacuum first, and then equilibrated at a(w) = 0.113. The addition of triethylamine to the reaction medium increased dramatically the enzymatic activity. However, the pentapeptide yield was affected neither by the drying procedure nor by the addition of triethylamine. The donor ester Z-Gly-Trp-Met-OAl gave initial reaction rates 2.6 times higher than the conventional ethyl ester derivative but rendered similar yields. The best results were obtained using Z-Gly-Trp-Met-OCam as acyl-donor ester; 80% yield and initial reaction rates 4 times higher than the ethyl ester derivative. In all cases, acetonitrile containing Tris-HCl 50 mM pH 9 buffer (0.5% v/v) and triethylamine (0.5% v/v) was found to be the best reaction system. Under these conditions, it was possible to use the nucleophile H-Asp-Phe-NH(2) with beta-unprotected aspartic acid residue. In this case, 50% yield was obtained, but economic considerations could lead to select it as nucleophile. Finally, the fragment condensation reaction was carried out at gram scale, obtaining a 39% yield which included the reaction, removal of protecting groups and purification steps. (c) 1997 John Wiley & Sons, Inc. Biotechnol Bioeng 56: 456-463, 1997.

Enzymatic synthesis of a CCK-8 tripeptide fragment in organic media.

The enzymatic synthesis of the tripeptide derivative Z-Gly-Trp-Met-OEt is reported. This tripeptide is a fragment of the cholecystokinin C-terminal octapeptide CCK-8. Studies on the alpha-chymotrypsin catalyzed coupling reaction between Z-Gly-Trp-R(1) and Met-R(2) have focused on low water content media, using deposited enzyme on inert supports such as Celite and polyamide. The effect of additives (polar organic solvents), the acyl-donor ester structure, the C-alpha protecting group of the nucleophile, enzyme loading, and substrate concentration were tested. The best reaction medium found was acetonitrile containing buffer (0.5%, v/v) and triethylamine (0.5%, v/v) using the enzyme deposited on Celite as catalyst (8 mg of alpha-chymotrypsin/g of Celite). A reaction yield of 81% was obtained with Z-Gly-Trp-OCam as acyl donor, at an initial concentration of 80 mM. The tripeptide synthesis was scaled up to the production of 2 g of pure tripeptide with an overall yield of 71%, including reaction and purification steps.