Novel Gd3+-doped silica-based optical fiber material for dosimetry in proton therapy.

Optical fibers hold promise for accurate dosimetry in small field proton therapy due to their superior spatial resolution and the lack of significant Cerenkov contamination in proton beams. One known drawback for most scintillation detectors is signal quenching in areas of high linear energy transfer, as is the case in the Bragg peak region of a proton beam. In this study, we investigated the potential of innovative optical fiber bulk materials using the sol-gel technique for dosimetry in proton therapy. This type of glass is made of amorphous silica (SiO[Formula: see text]) and is doped with Gd[Formula: see text] ions and possesses very interesting light emission properties with a luminescence band around 314 nm when exposed to protons. The fibers were manufactured at the University of Lille and tested at the TRIUMF Proton Therapy facility with 8.2-62.9 MeV protons and 2-6 nA of extracted beam current. Dose-rate dependence and quenching were measured and compared to other silica-based fibers also made by sol-gel techniques and doped with Ce[Formula: see text] and Cu[Formula: see text]. The three fibers present strong luminescence in the UV (Gd) or visible (Cu,Ce) under irradiation, with the emission intensities related directly to the proton flux. In addition, the 0.5 mm diameter Gd[Formula: see text]-doped fiber shows superior resolution of the Bragg peak, indicating significantly reduced quenching in comparison to the Ce[Formula: see text] and Cu[Formula: see text] fibers with a Birks' constant, k[Formula: see text], of (0.0162 [Formula: see text] 0.0003) cm/MeV in comparison to (0.0333 [Formula: see text] 0.0006) cm/MeV and (0.0352 [Formula: see text] 0.0003) cm/MeV, respectively. To our knowledge, this is the first report of such an interesting k[Formula: see text] for a silica-based optical fiber material, showing clearly that this fiber presents lower quenching than common plastic scintillators. This result demonstrates the high potential of this inorganic fiber material for proton therapy dosimetry.

Line broadening of confined CO gas: from molecule-wall to molecule-molecule collisions with pressure.

The infrared absorption in the fundamental band of CO gas confined in porous silica xerogel has been recorded at room temperature for pressures between about 5 and 920 hPa using a high resolution Fourier transform spectrometer. The widths of individual lines are determined from fits of measured spectra and compared with ab initio predictions obtained from requantized classical molecular dynamics simulations. Good agreement is obtained from the low pressure regime where the line shapes are governed by molecule-wall collisions to high pressures where the influence of molecule-molecule interactions dominates. These results, together with those obtained with a simple analytical model, indicate that both mechanisms contribute in a practically additive way to the observed linewidths. They also confirm that a single collision of a molecule with a wall changes its rotational state. These results are of interest for the determination of some characteristics of the opened porosity of porous materials through optical soundings.

Linear and nonlinear optical properties of gold nanoparticle-doped photonic crystal fiber.

We report on the production of air/silica photonic crystal fiber doped with gold nanoparticles. The stack-and-draw technique was used to combine a gold nanoparticles-doped silica core rod synthesized by the sol-gel route with capillaries drawn from commercially available silica tubes. The presence of nanoparticles in the core region was confirmed at the different steps of the process down to the fiber geometry, even after multiple drawings at ~2000 °C. Optical properties of the fiber were investigated and put in evidence the impact of gold nanoparticles on both linear and nonlinear transmission.

Optical spectroscopy of bismuth-doped pure silica fiber preform.

We report on the optical spectroscopy of monolithic fiber preform prepared from nanoporous bismuth-doped silica glass. The experiments reveal the existence of at least two different types of active centers and clearly demonstrate that the presence in the glass matrix of other dopant is not necessary to obtain the near-IR photoluminescence connected to Bismuth.

Laser-induced direct space-selective precipitation of CdS nanoparticles embedded in a transparent silica xerogel.

A simple method, suitable for direct space-selective precipitation of semiconducting nanoparticles inside a transparent silica xerogel, is presented. The porous silica monoliths, prepared by the sol-gel method, are first loaded with specific CdS precursors. Then, the samples can be irradiated using either a femtosecond laser to generate the nanoparticles inside the deep volume of the silica matrix or a continuous visible laser to yield a nanocrystal growth under the surface. The resulting CdS nanoparticles are characterized using absorption and Raman spectroscopies, x-ray diffraction analysis and transmission electron microscopy.

Raman scattering boson peak and differential scanning calorimetry studies of the glass transition in tellurium-zinc oxide glasses.

Raman scattering and differential scanning calorimetry (DSC) measurements have been carried out on four mixed tellurium-zinc oxide (TeO(2))(1 - x)(ZnO)(x) (x = 0.1, 0.2, 0.3, 0.4) glasses under variable temperature, with particular attention being given to the respective glass transition region. From the DSC measurements, the glass transition temperature T(g) has been determined for each glass, showing a monotonous decrease of T(g) with increasing ZnO content. The Raman study is focused on the low-frequency band of the glasses, the so-called boson peak (BP), whose frequency undergoes an abrupt decrease at a temperature T(d) very close to the respective T(g) values obtained by DSC. These results show that the BP is highly sensitive to dynamical effects over the glass transition and provides a means for an equally reliable (to DSC) determination of T(g) in tellurite glasses and other network glasses. The discontinuous temperature dependence of the BP frequency at the glass transition, along with the absence of such a behaviour by the high-frequency Raman bands (due to local atomic vibrations), indicates that marked changes of the medium range order (MRO) occur at T(g) and confirms the correlation between the BP and the MRO of glasses.