Structure, Stability, and Photocatalytic Activity of a Layered Perovskite Niobate after Flux-Mediated Sn(II) Exchange.

A new strategy to incorporate the Sn(II) cation and its stereoactive lone pair into the structure of a photocatalytic oxide has been achieved by leveraging the asymmetric coordination environments within the (111)-oriented perovskite-type layers of Ba5Nb4O15. This layered perovskite represents one of the few known photocatalysts capable of efficiently splitting water, but its activity is restricted to ultraviolet radiation owing to its large band gap. By reacting this layered niobate at 350 °C for 24 h within a low-melting SnCl2/SnF2 salt, the new (Ba1-xSnx)Nb4O15 (x = 0-0.5; P3̅m1; a = 5.79650(5) Å, c = 11.79288(8) Å; Z = 2) has been prepared in high purity with up to ∼50% Sn(II) cations. Statistical disordering of the Sn(II) cations was probed by neutron diffraction Rietveld refinements and found to occur predominantly over the asymmetric cation sites, Ba2 and Ba3, for the 40% Sn(II) composition of x = 0.4. An increasing Sn(II) amount significantly red-shifts the band gap (Eg) from 0% Sn for x = 0 (3.78 eV; ultraviolet, indirect) to 40% Sn for x = 0.4 (Eg = 2.35 eV; visible, indirect), as found by UV-vis diffuse reflectance. Density functional theory calculations show an increasing metastability, i.e., a thermodynamic instability toward decomposition to the simpler oxides SnO, Nb2O5, and SnNb2O6. A synthetic limit of ∼50% Sn(II) cations can be kinetically stabilized under these reaction conditions. For the highest Sn(II) amounts, photocatalytic rates are observed for the production of molecular oxygen from water of up to ∼77 µmol O2 h-1 g-1 (visible irradiation) and ∼159 µmol O2 h-1 g-1 (UV-vis irradiation), with apparent quantum yields of ∼0.35 and 0.52%, respectively. By comparison, pure Ba5Nb4O15 exhibits no measurable photocatalytic activity under visible-light irradiation. Electronic structure calculations show that the decreased band gap stems from the introduction of the Sn(II) cations and the formation of a higher-energy valence band arising from the filled 5s2 valence orbitals. Thus, visible-light bandgap excitation occurs from electronic transitions predominantly involving the Sn(II) (5s2) to Nb(V) (4d0) cations. This study demonstrates the new and powerful utility of low-temperature Sn(II)-exchange reactions to sensitize layer-type oxide photocatalysts to the visible region of the solar spectrum, which is facilitated by exploiting their asymmetric cation environments.

Impact of Nb(V) Substitution on the Structure and Optical and Photoelectrochemical Properties of the Cu5(Ta1- xNb x)11O30 Solid Solution.

A family of solid solutions, Cu5(Ta1- xNb x)11O30 (0 ≤ x ≤ 0.4), was investigated as p-type semiconductors for their band gaps and energies and for their activity for the reduction of water to molecular hydrogen. Compositions from 0 to 40 mol % niobium were prepared in high purity by solid-state methods, accompanied by only very small increases in the lattice parameters of ∼0.05% and with the niobium and tantalum cations disordered over the same atomic sites. However, an increasing niobium content causes a significant decrease in the bandgap size from ∼2.58 to ∼2.05 eV owing to the decreasing conduction band energies. Linear-sweep voltammetry showed an increase in cathodic photocurrents with niobium content and applied negative potential of up to -0.6 mA/cm2 (pH ∼7.3; AM 1.5 G light filter with an irradiation intensity of ∼100 mW/cm2). The cathodic photocurrents could be partially stabilized by heating the polycrystalline films in air at 550 °C for 1 h to produce surface nanoislands of CuO or using protecting layers of aluminum-doped zinc oxide and titania. Aqueous suspensions of the Cu5(Ta1- xNb x)11O30 powders were also found to be active for hydrogen production under visible-light irradiation in a 20% aqueous methanol solution with the highest apparent quantum yields for the 10% and 20% Nb-substituted samples. Electronic structure calculations show that the increased photocurrents and hydroen evolution activities of the solid solutions arise near the percolation threshold of the niobate/tantalate framework wherein the Nb cations establish an extended -O-Nb-O-Nb-O- diffusion pathway for the minority carriers. The latter also reveals a novel pathway for enhancing charge separation as a function of the niobium-oxide connectivity. Thus, these results illustrate the advantages of using solid solutions to achieve the smaller bandgap sizes and band energies that are needed for solar-driven photocatalytic reactions.

A new metal transfer process for van der Waals contacts to vertical Schottky-junction transition metal dichalcogenide photovoltaics.

Two-dimensional transition metal dichalcogenides are promising candidates for ultrathin optoelectronic devices due to their high absorption coefficients and intrinsically passivated surfaces. To maintain these near-perfect surfaces, recent research has focused on fabricating contacts that limit Fermi-level pinning at the metal-semiconductor interface. Here, we develop a new, simple procedure for transferring metal contacts that does not require aligned lithography. Using this technique, we fabricate vertical Schottky-junction WS2 solar cells, with Ag and Au as asymmetric work function contacts. Under laser illumination, we observe rectifying behavior and open-circuit voltage above 500 mV in devices with transferred contacts, in contrast to resistive behavior and open-circuit voltage below 15 mV in devices with evaporated contacts. One-sun measurements and device simulation results indicate that this metal transfer process could enable high specific power vertical Schottky-junction transition metal dichalcogenide photovoltaics, and we anticipate that this technique will lead to advances for two-dimensional devices more broadly.

Activating the Growth of High Surface Area Alumina Using a Liquid Galinstan Alloy.

The growth of high surface area alumina has been investigated with the use of a liquid Galinstan alloy [66.5% (wt %) Ga, 20.5% In and 13.0% Sn] as an activator for aluminum. In this process, the aluminum is slowly dissolved into the gallium-indium-tin alloy, which is then selectively oxidized at ambient temperature and pressure under a humid stream of flowing CO2 or N2 to yield amorphous alumina. This preparative route represents a simple and low toxicity approach to obtain amorphous high surface area alumina with very low water content. The as-synthesized high surface area alumina aerogel was a blue-colored solid owing to the Rayleigh scattering by its dendritic fibrous nanostructure consisting of mainly alumina with small amounts of water. Upon annealing at 850 °C, the amorphous product transformed into γ-Al2O3, as well as θ-Al2O3 upon annealing at 1050 °C. Elemental analysis by energy-dispersive spectroscopy provides further evidence that the high surface area alumina is composed of only aluminum and oxygen. The surface area of the amorphous alumina varied from ∼79 to ∼140 m2/g, depending on the initial weight percentage of aluminum used in the alloy. A correlation between the initial concentration of aluminum in the alloy and the surface area of the alumina product was found to peak at ∼30% Al. These results suggest a novel route to the formation of amorphous alumina aerogel-type materials.