Episodic fluid venting from sedimentary basins fueled by pressurized mudstones.

Subsurface sandstone reservoirs sealed by overlying, low-permeability layers provide capacity for long-term sequestration of anthropogenic waste. Leakage can occur if reservoir pressures rise sufficiently to fracture the seal. Such pressures can be generated within the reservoir by vigorous injection of waste or, over thousands of years, by natural processes. In either case, the precise role of intercalated mudstones in the long-term evolution of reservoir pressure remains unclear; these layers have variously been viewed as seals, as pressure sinks, or as pressure sources. Here, we use the geological record of episodic fluid venting in the Levant Basin to provide striking evidence for the pressure-source hypothesis. We use a Bayesian framework to combine recently published venting data, which record critical subsurface pressures since ∼2 Ma, with a stochastic model of pressure evolution to infer a pressure-recharge rate of ∼30 MPa/Myr. To explain this large rate, we quantify and compare a range of candidate mechanisms. We find that poroelastic pressure diffusion from mudstones provides the most plausible explanation for these observations, amplifying the ∼3 MPa/Myr recharge caused primarily by tectonic compression. Since pressurized mudstones are ubiquitous in sedimentary basins, pressure diffusion from mudstones is likely to promote seal failure globally.

Stress distribution around kerogen particles as a measure of the initiation of bitumen-filled microfractures in organic-rich source rocks.

In this article, we present a method used to model the initiation of bitumen-filled microfractures in immature, organic-rich source rocks. The first part presents the method used to calculate the stress distribution around the kerogen particles. The second part explains the method used to calculate the pressure change as a function of the transformation ratio and the resulting overpressure.•The effective principal stresses acting on the kerogen boundary were calculated.•Kerogen geometries were determined using the measured aspect ratio of the kerogen traces obtained from the petrography observation.•To estimate overpressure, the increase in pressure due to the transformation of kerogen to bitumen was calculated.