Bionanotechnology: small can have a big impact in the medical sciences: a WIN-win situation. Part 2.

Bionanotechnology blends the areas of nanotechnology and biological sciences. This article surveys the area of nanoscale biosensor development and the application of state-of-the-art biophysical techniques to elucidate fundamental membrane and surfactant biochemistry undertaken at the University of Waterloo (Canada). The Waterloo Institute for Nanotechnology (WIN), coordinates various cutting-edge nanotechnology research areas at the University of Waterloo. One focus is the area of biosensor research and fundamental biophysics in bionanotechnology. This is Part 2 of a contribution from the WIN initiative.

Reactions of the (2-pyridyl) pyrrolide platinum(II) complex driven by sterically encumbered chelation: a model for the reversible attack of alcohol at the coordinated carbon monoxide.

Treatment of 3,5-bis(trifluoromethyl)-2-(2'-pyridyl)pyrrole (fpyroH) with Pt(DMSO)2Cl2 and Na2CO3 in THF solution gave a light-yellow complex denoted as [Pt(fpyro)2] (1). A single-crystal X-ray diffraction study on 1 revealed a large conformational distortion around the platinum(II) center, which is attributed to interligand repulsion between the pyridyl groups and the CF3 substituents of the nearby pyrrolides. Reaction of 1 with N- and C-donor ligands such as acetonitrile, pyridine, isocyanide, and CO affords the adducts [Pt(fpyro)2(L)], L = NCMe (2), pyridine (3), CNBut (4), and CO (5), showing formation of one monodentate fpyro ligand by release of the strain energy. The variable-temperature 1H NMR studies showed a static structure for the N-substituted adducts 2 and 3, whereas the C-adducts 4 and 5 are shown to be more labile, displaying a pairwise exchange of bidentate and monodentate fpyro ligands in solution. Addition of ethanol to the coordinated CO in 5 during recrystallization is also established, affording an ethoxycarbonyl complex [Pt(fpyro)(fpyroH)(CO2Et)] (6), which was isolated as a crystalline solid and can be readily converted back to 5 and free ethanol upon dissolution at room temperature.

Luminescent platinum(II) complexes containing isoquinolinyl indazolate ligands: synthetic reaction pathway and photophysical properties.

New Pt(II) dichloride complexes [Pt(1-iqdzH)Cl2] (2a) and [Pt(3-iqdzH)Cl2] (2b), in which idqzH = 1- or 3-isoquinolinyl indazole, were prepared by treatment of the corresponding indazoles with K2PtCl4 in aqueous HCl solution. Despite their nonemissive nature, these complexes could react with excess indazole, sodium picolinate, and 3-trifluoromethyl-5-(2-pyridyl) pyrazole [(fppz)H] to afford the respective a and b series of luminescent complexes [Pt(1-iqdz)(L/\X)] and [Pt(3-iqdz)(L/\X)], where L/\X = 1-iqdz (1a), 3-iqdz (1b), pic (3a, 3b), and fppz (4a, 4b). Single-crystal X-ray diffraction studies of 1b, 2a, and 3b revealed a planar molecular geometry without notable intermolecular Pt...Pt contact in the solid crystal, a result of the steric repulsion imposed by the bulky indazole fragments. For coordination complexes 1, 3, and 4, photoluminescence in degassed CH2Cl2 revealed high quantum efficiency and short radiative lifetimes in the range of several microseconds. As supported by the spectral feature, the associated radiation lifetimes, and a computational approach based on time-dependent density function theory (TD-DFT), the origin of the emission is attributed to a mixed 3MLCT/3pipi transition. The TD-DFT approach further confirmed that, except for the series 1 complexes, the HOMO of 3-iqdz complexes 3b and 4b is much less located at the central Pt(II) atom than the HOMO orbitals of the respective 1-iqdz complexes 3a and 4a, leading to a smaller degree of MLCT contribution. Consequently, there are a blue-shifted emission signal and an inferior emission quantum yield for the 3-iqdz derivatives. OLED devices with a multilayer configuration of ITO/NPB/CBP:3a/BCP/Alq3/LiF/Al were fabricated using a CBP layer doped with various concentrations of 3a, ranging from 6% to 100%, within the emitting layer. The best device performance was realized using a 6% doping concentration, for which the external quantum yield of 4.93%, luminous efficiency of 12.19 cd/A, and power efficiency of 6.12 lm W-1 were observed at 20 mA/cm2, while a maximum luminescence as high as 20296 cd/m2 was also realized at 16 V, showing good prospect for the fabrication of Pt(II) based OLEDs.

En route to the formation of high-efficiency, osmium(II)-based phosphorescent materials.

Triosmium cluster complexes [Os3(CO)8(fppz)2] (2a) and [Os3(CO)8(fptz)2] (2b) bearing two 2-pyridyl azolate ligands were synthesized in an attempt to establish the reaction mechanism that gives rise to the blue-emitting phosphorescent complexes [Os(CO)2(fppz)2] (1a) and [Os(CO)2(fptz)2] (1b) [(fppz)H = 3-(trifluoromethyl)-5-(2-pyridyl)pyrazole; (fptz)H = 3-(trifluoromethyl)-5-(2-pyridyl)triazole]. X-ray structural analysis of 2b showed an open triangular metal framework incorporating multisite-coordinated 2-pyridyltriazolate ligands. Treatment of 2 with the respective 2-pyridylazolate ligand led to the formation of blue-emitting complex 1b, confirming their intermediacy, while the reaction of 2b with phosphine ligand PPh2Me afforded two hitherto novel hydride complexes 3 and 4, for which the reversible interconversion was clearly established at higher temperatures (> 180 degrees C). The single-crystal X-ray diffraction analyses of 3 and 4 confirmed their monometallic and isomeric nature, together with the coordination of two phosphine ligands located in the trans-disposition and one CO and one hydride located opposite to the pyridyl triazolate chelate. Subtle differences in photophysical properties were examined for isomers 3 and 4 on the basis of steady state absorption and emission, the relaxation dynamics, and temperature-dependent luminescent studies. The results, in combination with time-dependent density function theory (TDDFT) calculations, provide fundamental insights into the future design and preparation of highly efficient phosphorescent emitters.

Reactivity of electrophilic micro-phosphinidene complexes with N-heterocyclic carbenes: formation of the first main group element adducts of 'abnormal' carbene ligands.

The reactions of Mn2- and Co2-containing micro-PNiPr2 complexes with NCN carbenes afford the 'abnormal' carbene adducts [Mn2(CO)8{mu-P(NiPr2)}(4-cyclo-C3H2-1,3-(NR)2))] and [Co2(CO)4(mu-dppm){mu-P(NiPr2)(4-cyclo-C3H2-1,3-(NR)2)}] (R = tBu, adamantyl), respectively.

Platinum(II) complexes with pyridyl azolate-based chelates: synthesis, structural characterization, and tuning of photo- and electrophosphorescence.

A new series of luminescent platinum(II) azolate complexes with a formula of [Pt(NwedgeN)(2)], in which NwedgeN = mppz (1), bppz (2a), bzpz (2b), bmpz (2c), bqpz (2d), fppz (3a), hppz (3b), bptz (4), hptz (5), were synthesized, and their photophyscial properties were examined. Single-crystal X-ray diffraction studies of 2c and 3b revealed a planar molecular geometry, in which the NwedgeN chelates adopt a trans configuration and show notable interligand C-H...N hydrogen bonding within the complex. Interesting intermolecular interactions were observed in the solid state. Complex 2c formed a slipped-stack structure with a Pt...Pt separation distance of 6.432 Angstroms, while complex 3b showed a columnar stacking with the molecules oriented in an alternating order in relation to the chain axis, giving a much reduced Pt...Pt distance of 3.442 Angstroms. The lowest absorption band for all complexes revealed strong state mixings between the singlet and triplet (MLCT and intraligand pipi) manifolds. Complexes 1 and 2 showed mixed (3)MLCT and (3)pipi phosphorescence in fluid solution. While radiationless deactivation was apparently dominant for complexes 3-5 in solution, resulting in rather weak emission, strong phosphorescence was observed in the room-temperature solid state with the peak wavelength being significantly red shifted compared to that in solution. The emission nature has been tentatively assigned to be (3)MMLCT in character. OLED devices with a multilayer configuration of ITO/NPB/CBP:2a/BCP/Alq(3)/LiF/Al were successfully fabricated using a CBP layer doped with various amount of 2a, ranging from 6 to 100%, as the emitting layer. A substantial red shift with increasing doping concentrations was observed in electroluminescence. With a neat film of 2a, the device showed a green emission with lambda(max) at 556 nm and an external QE of approximately 1.6% at a driving current of 20 mA. Similarly, for the device using a neat film of 3a, an electroluminescence centered at 616 nm with a slightly reduced external QE of approximately 2.1% was recorded. Aggregation of platinum(II) complexes in the solid state was proposed to account for the large red-shift in electroluminescence.

Reactivity patterns of thermally stable, terminal, electrophilic phosphinidene complexes towards diazoalkanes: oxidation at the phosphorus centre and formation of P-bound eta1-phosphaazine, eta1-phosphaalkene and eta3-diazaphosphaallene complexes.

The thermally stable, terminal phosphinidene complexes [CpM(CO)2(eta1-PNiPr2)]AlCl4(Cp= Cp, Cp*; M = Fe) and [Cp*M(CO)3(eta1-PNiPr2)]AlCl4 (M = Cr, Mo, W) react with Ph2C=N=N to form terminal P-coordinated eta1-phosphaazine and eta3-diazaphosphaallene ligands, respectively, whereas [CpFe(CO)2(eta1-PNiPr2)]AlCl4 reacts with Me3SiCHN2 affording a terminal phosphorus bound eta1-phosphaalkene complex.

New CVD precursors capable of depositing copper metal under mixed O2/Ar atmosphere.

Volatile low-melting CuII metal complexes Cu[OC(CF3)2CH2C(Me)=NMe]2 (4) and Cu[OC(CF3)2CH2CHMeNHMe]2 (5) were synthesized and characterized by spectroscopic methods. A single-crystal X-ray diffraction study on complex 4 shows the anticipated N2O2 square-planar geometry with the imino alcoholate ligand arranged in the all-trans orientation. In contrast, a highly distorted N2O2 geometry with a dihedral angle of 33 degrees was observed for complex 5, suggesting that the fully saturated amino alcoholate ligand produces a much greater steric congestion around the metal ion. Metal CVD experiments were conducted, showing that both complexes, 4 and 5, are capable of depositing copper metal at temperatures of 275-300 degrees C using an inert argon carrier gas mixed with low concentrations (2-8%) of O2. The best copper thin film showed a purity of approximately 96 at. % and a resistivity of 2.11 microOmega cm versus that of the bulk standard (1.7 microOmega cm), as revealed by XPS and four-point probe analyses, respectively. We speculate that the low concentration of O2 promotes partial ligand oxidation, thus releasing the reduced copper on the substrate and affording the high-purity copper deposit.

Reactivity of electrophilic micro-phosphinidene complexes with heterocumulenes: formation of the first sigma-pi-aminophosphaimine complexes [Mn2(CO)8{micro-eta1,eta2-P(NiPr2)=NR}] and diazoalkane insertions into metal-phosphorus bonds.

The bridging phosphinidene complexes [Mn2(CO)8(micro-PNiPr2)] and [Co2(CO)4(micro-dppm)(micro-PNR2)](NR2=NiPr2, TMP) react with heterocumulenes RN3, CH2N2 and Ph2C=N=N to form complexes with micro-eta1,eta2-aminophosphaimine, micro-eta1,eta2-aminophosphaalkene and micro-eta1,eta2-aminophosphadiphenylmethylazaimine ligands, respectively.

Metal-templated diyne cyclodimerization and cyclotrimerization.

Reaction of [Pt(CH3)2(COD)] (COD = 1,5-cyclooctadiene) with Ph2PCCCCPPh2 led to a mixture of [{Pt(CH3)2}2(mu-Ph2PC4PPh2)2] (1) and [{Pt(CH3)2}3(mu-Ph2PC4PPh2)3] (2). Reaction of [PtCl2(COD)] with Ph2PCCCCPPh2 led to a mixture of the thermally unstable compounds [{PtCl2}2(mu-Ph2PC4PPh2)2] (3) and [{PtCl2}3(mu-Ph2PC4PPh2)3] (4) which transform into [{PtMe2}2{mu-C8(PPh2)4}] (5) and [{PtMe2}3{mu3-C12(PPh2)6}] (6) containing 8-membered diene-diyne and 12-membered triene-triyne rings, respectively. Compound 2 can be converted to [{PtMe2}3{C12(PPh2)6}] (7) by heating with CuCl at 80 degrees C, while 1 can be heated without significant cycloaddition.

Transformation of mu4-phosphinidenes at an Ru5 center: isolation and structural characterization of hydroxyphosphinidene cluster acids, fluorophosphinidenes, and a novel mu5-phosphide.

Acid hydrolysis of [Ru(5)(CO)(15)(mu(4)-PN(i)Pr(2))] (2) or protonation of the anionic PO cluster [Ru(5)(CO)(15)(mu(4)-PO)](-) (3) affords the hydroxyphosphinidene complex [Ru(5)(CO)(15)(mu(4)-POH)].1.[H(2)N(i)()Pr(2)][CF(3)SO(3)], which cocrystallizes with a hydrogen-bonded ammonium triflate salt. Reaction of [Ru(5)(CO)(15)(mu(4)-PN(i)Pr(2))] (2) with bis(diphenylphosphino)methane (dppm) leads to [Ru(5)(CO)(13)(mu-dppm)(mu(4)-PN(i)Pr(2))] (4). Acid hydrolysis of 4 leads to the dppm-substituted hydroxyphosphinidene [Ru(5)(CO)(13)(mu-dppm)(mu(4)-POH)] (5), which is analogous to 1, but unlike 1, can be readily isolated as the free hydroxyphosphinidene acid. Compound 5 can also be formed by reaction of 3 with dppm and acid. The cationic hydride cluster [Ru(5)(CO)(13)(mu-dppm)(mu(3)-H)(mu(4)-POH)][CF(3)SO(3)] (6) can be isolated from the same reaction if chromatography is not used. Compound 4 also reacts with HBF(4) to form the fluorophosphinidene cluster [Ru(5)(CO)(13)(mu-dppm)(mu(4)-PF)] (7), while reaction with HCl leads to the mu-chloro, mu(5)-phosphide cluster [Ru(5)(CO)(13)(mu-dppm)(mu-Cl)(mu(5)-P)] (8).

A remarkable ligand orientational effect in osmium-atom-induced blue phosphorescence.

A new series of Os(II)-based carbonyl complexes cis(CO),trans(Npy,Npy),cis(Ntz,Ntz)-[Os(CO)2(bptz)2] (1), cis(CO),cis(Npy,Npy),trans(Ntz,Ntz)-[Os(bptz)2(CO)2] (2), and cis(CO),trans(Npy,Npy),cis(Ntz,Ntz)-[Os(CO)2(fptz)2] (3), where bptz and fptz denote 3-tert-butyl-5-(2-pyridyl)- and 3-trifluoromethyl-5-(2-pyridyl)-1,2,4-triazolate, respectively, have been designed and synthesized in an effort to achieve high efficiency, room-temperature blue phosphorescence. Although 1 and 2 are geometric isomers, remarkably different excited-state relaxation pathways were observed. Complex 1 exhibits strong phosphorescence in CH3CN (Phi(p) approximately 0.47) and as a single crystal at room temperature, whereas complex 2 is nearly nonemissive under similar conditions. The associated relaxation dynamics have been comprehensively investigated by spectroscopic and relaxation dynamics as well as by theoretical approaches. Our results lead us to the conclusion that for complex 2, the "loose bolt" effect of metal-ligand bonding interactions plays a crucial role in the fast radiationless deactivation of this type of geometrical isomer. Fine adjustment can also be achieved by functionalizing the ligands so that the electron-withdrawing nature of the CF3 group in 3 stabilizes the HOMO of the triazolate moiety, thus moving the emission further into the pure "blue" region; this results in highly efficient phosphorescence and renders 3 particularly attractive for application in blue OLED devices.

Fluorinated aminoalkoxide and ketoiminate indium complexes as MOCVD precursors for In2O3 thin film deposition.

The syntheses of two distinctive types of indium complex derived from trimethylindium (InMe(3)) are reported. The first kind has a generalized structural formula [InMe(2)(amak)](2), where (amak)H is an abbreviation for a series of chelating amino alcohol ligands HOC(CF(3))(2)CH(2)NHR, R = (CH(2))(2)OMe (1), Me (2), and Bu(t) (3), as well as HOC(CF(3))(2)CH(2)NMe(2) (4); while the second type of complex is illustrated by [InMe(2)(keim)] (5), for which (keim)H is a tridentate ketoimine ligand of structural formula O=C(CF(3))CH(2)C(CF(3))=NCH(2)CH(2)NMe(2). The solid-state structures of 2 and 5 were determined using single crystal X-ray diffraction studies. For the aminoalkoxide complexes 2-4, the existence of dimeric In(2)O(2) core structures in the solid state has been established with the amino fragment located trans to the alkoxide ligands, in a molecular arrangement which is in contrast to the distorted, trigonal bipyramidal geometry observed for the ketoiminate complex 5. Moreover, VT NMR studies of 2 revealed a rapid dimer-to-monomer equilibration and simultaneous rupture of the N-->In dative interaction, affording two interconvertible isomers related by having the N-Me substituents in either trans or cis dispositions. For complexes 2 and 5, deposition of In(2)O(3) thin films was successfully conducted at temperatures 400-500 degrees C, using O(2) as the carrier gas to induce indium oxide deposition and to suppress carbon impurity present in the thin film. Scanning electron micrographs (SEMs) revealed the surface morphologies. The atomic composition of these films was examined by both X-ray photoelectron spectroscopy (XPS) and Rutherford backscattering (RBS) methods, while X-ray diffraction studies (XRD) confirmed the formation of a preferred orientation along the (222) planes.

A thermally stable and sterically unprotected terminal electrophilic phosphinidene complex of cobalt and its conversion to an eta(1)-phosphirene.

The terminal chloroaminophosphido complex [Co(CO)3(PPh3){P(Cl)NiPr2}] is formed via reaction of K[Co(CO)4] with iPr2NPCl2 in the presence of triphenylphosphine. Chloride abstraction by aluminum trichloride leads to the first terminal phosphinidene complex of cobalt, [Co(CO)3(PPh3)(PNiPr2)][AlCl4]. The electrophilicity of the phosphinidene was demonstrated by its reaction with diphenylacetylene to form the phosphirene complex [Co(CO)3(PPh3){P(NiPr2)C(Ph)C(Ph)}][AlCl4].

Mixed nitrosyl/phosphinidene and nitrene/phosphinidene clusters of ruthenium.

Reaction of the aminophosphinidene complex [Ru5(CO)15(mu 4-PNPri2)] 1 with [PPN][NO2] (PPN = Ph3P=N=PPh3) led to the mixed nitrosyl/phosphinidene cluster complex [PPN][Ru5(CO)13(mu-NO)(mu 4-PNPri2)] 2 which is transformed into the novel nitrene/phosphinidene cluster [Ru5(CO)10(mu-CO)2(mu 3-CO)(mu 4-NH)(mu 3-PNPri2)] 3 via treatment with triflic acid.

Phosphorus chemical shift tensors of phosphido ligands in ruthenium carbonyl compounds: (31)P NMR spectroscopy of single-crystal and powder samples and ab initio calculations.

The phosphorus chemical shift (CS) tensors of several ruthenium carbonyl compounds containing a phosphido ligand, micro), bridging a Ru [bond] Ru bond were characterized by solid-state (31)P NMR spectroscopy. As well, an analogous osmium compound was examined. The structures of most of the clusters investigated have approximate local C(2v) symmetry about the phosphorus atom. Compared to the "isolated" PH(2)(-) anion, the phosphorus nucleus of a bridging phosphido ligand exhibits considerable deshielding. The phosphorus CS tensors of most of the compounds have spans ranging from 230 to 350 ppm and skews of approximately zero. Single-crystal NMR was used to investigate the orientation of the phosphorus CS tensors for two of the compounds, Ru(2)(CO)(6)(mu(2)-C [triple bond] C [bond] Ph)(mu(2)-PPh(2)) and Ru(3)(CO)(9)(mu(2)-H)(mu(2)-PPh(2)). The intermediate component of the phosphorus CS tensor, delta(22), lies along the local C(2) axis in both compounds. The least shielded component, delta(11), lies perpendicular to the Ru [bond] P [bond] Ru plane while the most shielded component, delta(33), lies perpendicular to the C [bond]P [bond] C plane. The orientation of the phosphorus CS tensor for a third compound, Ru(2)(CO)(6)(mu(2)-PPh(2))(2), was investigated by the dipolar-chemical shift NMR technique and was found to be analogous, suggesting it to be the same in all compounds. Ab initio calculations of phosphorus magnetic shielding tensors have been carried out and reproduce the orientations found experimentally. The orientation of the CS tensor has been rationalized using simple frontier MO theory. Splittings due to (99,101)Ru [bond] (31)P spin-spin coupling have been observed for several of the complexes. A rare example of (189)Os [bond] (31)P spin-spin splittings is observed in the (31)P MAS NMR spectrum of the osmium cluster, where (1)J((189)Os, (31)P) is 367 Hz. For this complex, the (189)Os nuclear quadrupolar coupling constant is on the order of several hundred megahertz.