The effectiveness and role of phages in the disruption and inactivation of clinical P. aeruginosa biofilms.

Biofilms of P. aeruginosa are known to be resilient forms of survival of this opportunistic pathogen, both within the host and in natural or engineered environments. This study investigated the role of phages in the disruption and inactivation of clinical P. aeruginosa biofilms by previously isolated phages. All seven tested clinical strains formed biofilms in 56-80 h. Four previously isolated phages were effective in disrupting the formed biofilms when applied at multiplicity of infection (MOI) of 10, where phage cocktails had equivalent or worse performance than single phages. Phage treatments reduced the biofilms' biomass (cells and extracellular matrix) by 57.6-88.5% after 72 h of incubation. Biofilm disruption led to the detachment of 74.5-80.4% of the cells. The phages were also able to kill the cells from the biofilms, reducing the living cell counts by approximately 40.5-62.0% after a single treatment. A fraction of 24-80% of these killed cells were also lysed due to phage action. This study showed that phages can have a relevant role in disrupting, inactivating, and destroying P. aeruginosa biofilms, which can be used in the development of treatment processes to complement or replace antibiotics and/or disinfectants.

The impact of pH on the anaerobic and aerobic metabolism of Tetrasphaera-enriched polyphosphate accumulating organisms.

Members of the genus Tetrasphaera are putative polyphosphate accumulating organisms (PAOs) that have been found in greater abundance than Accumulibacter in many full-scale enhanced biological phosphorus removal (EBPR) wastewater treatment plants worldwide. Nevertheless, previous studies on the effect of environmental conditions, such as pH, on the performance of EBPR have focused mainly on the response of Accumulibacter to pH changes. This study examines the impact of pH on a Tetrasphaera PAO enriched culture, over a pH range from 6.0 to 8.0 under both anaerobic and aerobic conditions, to assess its impact on the stoichiometry and kinetics of Tetrasphaera metabolism. It was discovered that the rates of phosphorus (P) uptake and P release increased with an increase of pH within the tested range, while PHA production, glycogen consumption and substrate uptake rate were less sensitive to pH changes. The results suggest that Tetrasphaera PAOs display kinetic advantages at high pH levels, which is consistent with what has been observed previously for Accumulibacter PAOs. The results of this study show that pH has a substantial impact on the P release and uptake kinetics of PAOs, where the P release rate was >3 times higher and the P uptake rate was >2 times higher at pH 8.0 vs pH 6.0, respectively. Process operational strategies promoting both Tetrasphaera and Accumulibacter activity at high pH do not conflict with each other, but lead to a potentially synergistic impact that can benefit EBPR performance.

Polyhydroxyalkanoates production from ethanol- and lactate-rich fermentate of confectionary industry effluents.

Polyhydroxyalkanoate (PHA) production has been the focus of considerable research to increase productivities and reduce production costs. In this study, a fermented confectionary industry wastewater was used as feedstock for mixed microbial culture PHA production. The feedstock was dominated by lactate and ethanol (60-90 % of all soluble fermentation products). The culture selection reactor was inoculated with municipal activated sludge and was operated at an organic loading rate (OLR) of 100 Cmmol·L-1·d-1, achieving a robust PHA-accumulating enrichment, which produced up to 52.6 ± 0.4 wt% of PHA in accumulation assays. An OLR increase in the culture selection stage to 150 Cmmol·L-1·d-1 led to a PHA content of 59.1 ± 0.6, a yield of 0.93 ± 0.01 Cmol-PHA·Cmol-S-1 and a productivity of 0.93 ± 0.01 g-PHA L-1·h-1. A correlation analysis of the impact of ethanol concentrations from 3.19 to 20.3 Cmmol·L-1 in the reactor showed that ethanol inhibited PHA production rate and yield and the consumption of other carbon sources available. Microbial community analysis revealed the increase of Amaricoccus genus during the bioreactor operation time, a known PHA accumulator. The produced polymer was poly(3-hydroxybutyrate) with an average molecular weight of 4.3 × 105 Da and a polydispersity index of 1.88.

Electrochemical oxidation processes for PFAS removal from contaminated water and wastewater: fundamentals, gaps and opportunities towards practical implementation.

Electrochemical oxidation (EO) is emerging as one of the most promising methods for the degradation of recalcitrant per- and poly-fluoroalkyl substances (PFASs) in water and wastewater, as these compounds cannot be effectively treated with conventional bio- or chemical approaches. This review examines the state of the art of EO for PFASs destruction, and comprehensively compares operating parameters and treatment performance indicators for both synthetic and real contaminated water and wastewater media. The evaluation shows the need to use environmentally-relevant media to properly quantify the effectiveness/efficiency of EO for PFASs treatment. Additionally, there is currently a lack of quantification of sorption losses, resulting in a likely over-estimation of process' efficiencies. Furthermore, the majority of experimental results to date indicate that short-chain PFASs are the most challenging and need to be prioritized as environmental regulations become more stringent. Finally, and with a perspective towards practical implementation, several operational strategies are proposed, including processes combining up-concentration followed by EO destruction.

Novel Bacteriophages Show Activity against Selected Australian Clinical Strains of Pseudomonas aeruginosa.

Multi-drug resistant (MDR) clinical strains of Pseudomonas aeruginosa are the most prevalent bacteria in the lungs of patients with cystic fibrosis (CF) and burn wounds and among the most common in immunocompromised hospital patients in Australia. There are currently no promising antibiotics in the pipeline being developed against these strains. Phage therapy, which uses viruses known as bacteriophages to infect and kill pathogenic bacteria, could be a possible alternative treatment. To this end, we isolated and characterised four novel phages against Australian clinical strains of P. aeruginosa isolated from patients with cystic fibrosis, from infected blood and joint aspirate in Southeast Queensland, Australia. Activated sludge was enriched for phages using the clinical strains, and four bacteriophages were isolated. The phages were able to cause lysis in a further three identified clinical isolates. Morphology showed that they were all tailed phages (of the order Caudovirales), two belonging to the family Myoviridae and the others assigned to the Podoviridae and Siphoviridae. Their genomes were sequenced to reveal a doubled stranded DNA topology with genome sizes ranging from 42 kb to 65 kb. In isolating and characterising these novel phages, we directed our efforts toward the development and use of these phages as candidates for phage therapy as an alternative strategy for the management or elimination of these pathogenic strains. Here we describe novel phage candidates for potential therapeutic treatment of MDR Australian clinical isolates of P. aeruginosa.

Dynamics of Microbial Communities in Phototrophic Polyhydroxyalkanoate Accumulating Cultures.

Phototrophic mixed cultures (PMC) are versatile systems which can be applied for waste streams, valorisation and production of added-value compounds, such as polyhydroxyalkanoates (PHA). This work evaluates the influence of different operational conditions on the bacterial communities reported in PMC systems with PHA production capabilities. Eleven PMCs, fed either with acetate or fermented wastewater, and selected under either feast and famine (FF) or permanent feast (PF) regimes, were evaluated. Overall, results identified Chromatiaceae members as the main phototrophic PHA producers, along with Rhodopseudomonas, Rhodobacter and Rhizobium. The findings show that Chromatiaceae were favoured under operating conditions with high carbon concentrations, and particularly under the PF regime. In FF systems fed with fermented wastewater, the results indicate that increasing the organic loading rate enriches for Rhodopseudomonas, Rhizobium and Hyphomicrobiaceae, which together with Rhodobacter and Chromatiaceae, were likely responsible for PHA storage. In addition, high-sugar feedstock impairs PHA production under PF conditions (fermentative bacteria dominance), which does not occur under FF. This characterization of the communities responsible for PHA accumulation helps to define improved operational strategies for PHA production with PMC.

Diclofenac biotransformation in the enhanced biological phosphorus removal process.

Diclofenac is a pharmaceutical active compound frequently detected in wastewater and water bodies, and often reported to be persistent and difficult to biodegrade. While many previous studies have focussed on assessing diclofenac biodegradation in nitrification and denitrification processes, this study focusses on diclofenac biodegradation in the enhanced biological phosphorus removal (EBPR) process, where the efficiency of this process for diclofenac biodegradation as well as the metabolites generated are not well understood. An enrichment of Accumulibacter polyphosphate accumulating organisms (PAOs) was operated in an SBR for over 300 d, and acclimatized to 20 µg/L of diclofenac, which is in a similar range to that observed in domestic wastewater influents. The diclofenac biotransformation was monitored in four periods of stable operation and linked to the microbial community and metabolic behaviour in each period. Nitrification was observed in two of the four periods despite the addition of a nitrification inhibitor, and these periods were positively correlated with increased diclofenac biodegradation. Interestingly, in two periods with excellent phosphorus removal (>99%) and no nitrification, different levels of diclofenac biotransformation were observed. Period 2, enriched in Accumulibacter Type II achieved more significant diclofenac biotransformation (3.4 µg/gX), while period 4, enriched in Accumulibacter Type I achieved lower diclofenac biotransformation (0.4 µg/gX). In total, 23 transformation products were identified, with lower toxicity than the parent compound, enabling the elucidation of multiple metabolic pathways for diclofenac biotransformation. This study showed that PAOs can contribute to diclofenac biotransformation, yielding less toxic transformation products, and can complement the biodegradation carried out by other organisms in activated sludge, particularly nitrifiers.

Evaluation of continuous and intermittent trickling strategies for the removal of hydrogen sulfide in a biotrickling filter.

Biotrickling filter (BTF) is a widely applied bioreactor for odour abatement in sewer networks. The trickling strategy is vital for maintaining a sound operation of BTF. This study employed a lab-scale BTF packed with granular activated carbon at a short empty bed residence time of 6 s and pH 1-2 to evaluate different trickling strategies, i.e., continuous trickling (different velocities) and intermittent trickling (different trickling intervals), in terms of the removal of hydrogen sulfide (H2S), bed pressure drop, H2S oxidation products and microbial community. The H2S removal performance decreased with the trickling velocity (∼3.6 m/h) in BTF. In addition, three intermittent trickling strategies, i.e., 10-min trickling per 24 h, 8 h, and 2 h, were investigated. The H2S elimination capacity deteriorated after about 2 weeks under both 10-min trickling per 24 h and 8 h. For both intermittent (10-min trickling per 2 h) and continuous trickling, the BTF exhibited nearly 100 % H2S removal for inlet H2S concentrations<100 ppmv, but intermittent BTF showed better removal performance than continuous trickling when inlet H2S increased to 120-190 ppmv. Furthermore, the bed pressure drops were 333 and 3888 Pa/m for non-trickling and trickling periods, respectively, which makes intermittent BTF save 83 % energy consumption of the blower compared with continuous tirckling. However, intermittent BTF exhibited transient H2S breakthrough (<1 ppmv) during trickling periods. Moreover, elemental sulfur and sulfate were major products of H2S oxidation and Acidithiobacillus was the dominant genus in both intermittent and continuous trickling BTF. A mathematical model was calibrated for the intermittent BTF and a sensitivity analysis was performed on the model. It shows mass transfer parameters determine the H2S removal. Overall, intermittent trickling strategy is promising for improving odour abatement performance and reducing the operating cost of the BTF.

The storage compounds associated with Tetrasphaera PAO metabolism and the relationship between diversity and P removal.

In enhanced biological phosphorus removal (EBPR), Tetrasphaera can potentially be an abundant and important polyphosphate accumulating organism (PAO), however ongoing questions remain concerning its storage compounds, phosphorus (P) removal capabilities and metabolic behaviour. This study investigated each of these points in an enriched Tetrasphaera culture (95% biovolume). The enriched Tetrasphaera culture fermented amino acids, while also converting and storing diverse amino acids as aspartic and glutamic acid within cells. Subsequent intracellular consumption of these two amino acids during the aerobic phase supports their importance in the metabolism of Tetrasphaera. Polyhydroxyalkanoate (PHA) cycling was also observed in this study, in contrast to some previous studies on Tetrasphaera. While exhibiting anaerobic phosphorus release and aerobic uptake, the highly enriched Tetrasphaera culture was unable to completely remove phosphorus in sequencing batch reactors (SBR) cycles, with an average removal efficiency of 72.3 ± 7.8%. This is unlike a previous study containing both Tetrasphaera (70%) and Accumulibacter (22%), which regularly performed complete phosphorus removal under otherwise similar operational conditions, at efficiencies of > 99%. Notably, the phylodiversity of organisms belonging to Tetrasphaera was substantially different in the present work, consisting mainly of organisms within Clade 2, likely impacting PHA cycling. These results suggest that the contribution of Tetrasphaera towards P removal is highly dependent on the composition of its Clades within this microbial group and an observed higher abundance of Tetrasphaera in WWTPs does not necessarily imply overall higher P removal. This study improves our understanding of the role of Tetrasphaera within EBPR systems and key factors impacting its metabolism.

Achieving combined biological short-cut nitrogen and phosphorus removal in a one sludge system with side-stream sludge treatment.

Biological nitrogen (N) removal via the short-cut pathway (NH4+-N→NO2--N→N2) is economically attractive in wastewater treatment plants (WWTPs). However, biological phosphorus (P) removal processes remain a bottleneck in these systems due to the strong inhibitory effect of nitrite or its protonated form (HNO2, free nitrous acid - FNA) on polyphosphate accumulating organisms (PAOs). In this study, a novel combined nitrogen and phosphorus removal strategy was verified and achieved in a biological short-cut nitrogen removal system via side-stream sludge treatment with FNA, and the mechanisms impacting this process were investigated. The side-stream FNA treatment process applied here led to a significant reduction in the real sludge retention time (SRT) in the mainstream (approximately 2.7 days) based on the biocidal effect of FNA to the majority of the organisms. This work also found that around 40% of the P uptake activity was still maintained at a much higher FNA level of 38 µg N/L with potential PAOs, which highly broadened the current knowledge of PAOs community. An economic analysis revealed advantages of the proposed as compared to conventional biological nitrogen and phosphorus removal (13% savings in total cost), biological short-cut nitrogen removal (via FNA treatment) with chemical phosphorus precipitation (21% savings) and conventional biological nitrogen removal with chemical precipitation (27% savings). Overall, this study presents a novel and viable retrofit strategy in integrating biological short-cut nitrogen removal with EBPR for next generation WWTPs.

Sludge retention time impacts on polyhydroxyalkanoate productivity in uncoupled storage/growth processes.

The process involving mixed microbial cultures (MMCs) and waste-based substrates emerged as an alternative solution to reduce the market price of polyhydroxyalkanoates (PHAs). The selection of an efficient MMC that displays a significant PHA accumulation potential and a high growth rate is considered a key factor for the MMC PHA production feasibility. This study used a pilot plant to investigate the dynamics of growth vs storage in a mixed culture fed with fermented fruit waste under uncoupled carbon and nitrogen feeding. Varying sludge retention times (SRTs) (2 and 4 d) and organic loading rates (OLRs) (from 2.6 to 14.5 gCOD.L-1.d-1) were imposed for this purpose. Results showed that, regardless of the OLR imposed, cultures selected at lower SRT grew faster and more efficiently using stored PHA. However, they had inferior specific storage rates and accumulation capacity, resulting in lower PHA productivity. Additionally, the polymer storage yield was independent of the SRT, and was directly linked with the abundance of putative PHA-storers in the MMC. The high PHA productivity (4.6 ± 0.3 g.L-1.d-1) obtained for the culture selected at 4 d of SRT was 80% above that obtained for the lower SRT tested, underlining the importance of achieving a good balance between culture growth and accumulation capacity to increase the viability of the PHA-producing process from wastes.

Accumulibacter diversity at the sub-clade level impacts enhanced biological phosphorus removal performance.

Accumulibacter is a well-known group of organisms, typically considered to be polyphosphate accumulating organisms (PAOs), but potentially capable of glycogen accumulating organism (GAO) metabolism under limiting influent phosphate levels. Metabolic features of Accumulibacter are typically linked to its phylogenetic identity at the Type or clade level, though it is unclear the extent to which Accumulibacter diversity can correlate with its capacity to perform P removal. This paper investigates the fine-scale diversity of Accumulibacter and its link with enhanced biological phosphorus removal (EBPR) performance under various operating conditions, to understand the conditions and community structure leading to successful and unsuccessful EBPR operation. For this purpose, the organic carbon feeding rate and total organic carbon concentration were varied during three distinct operational periods, where influent phosphate was never limiting. Accumulibacter was always the dominant microbial group (>80% of all bacteria according to quantitative fluorescence in situ hybridisation - FISH) and low levels of Competibacter and other GAOs were consistently observed (<15% of all bacteria). Steady state was achieved in each of the three periods, with average phosphorus removal levels of 36%, 99% and >99%, respectively. Experimentally determined stoichiometric activity supported the expression of a mixed PAO/GAO metabolism in the first steady state period and the typical PAO metabolism in the other two steady state periods. FISH quantification and amplicon sequencing of the polyphosphate kinase (ppk1) functional gene indicated that Accumulibacter clade IIC was selected in the first steady state period, which shifted to clade IA after decreasing the carbon feeding rate in steady state period 2, and finally shifted back to clade IIC in the third steady state period. Fine-resolution Ppk-based phylogenetic analysis revealed three different clusters within Accumulibacter clade IIC, where clusters IICii and IICiii were linked to poor EBPR performance in period 1, and cluster IICi was linked to good EBPR performance in period 3. This study shows that the deterioration of EBPR processes through GAO activity at non-limiting P concentrations can be linked to organisms that are typically classified as PAOs, not only to known GAOs such as Competibacter. Intra-clade phylogenetic diversity within Accumulibacter showed that some clusters actually behave similarly to GAOs even without influent phosphate limitation. This study highlights the need to closely re-examine traditional interpretations regarding the link between the microbial community composition and identity with the performance and metabolism of EBPR systems.

Biotrickling filter for the removal of volatile sulfur compounds from sewers: A review.

Volatile sulfur compounds (VSCs) were identified as the dominant priority odorants emitted from sewers, including hydrogen sulfide (H2S), methyl mercaptan (MM), dimethyl disulfide (DMDS) and dimethyl sulfide (DMS). Biotrickling filter (BTF) is a widely-applied technology for odour abatement in sewers because of its relatively low operating cost and efficient H2S removal. The authors review the mechanisms and performance of BTF for the removal of these four VSCs, and discuss the key influencing factors including of empty bed residence time (EBRT), pH, temperature, nutrients, water content, trickling operation and packing materials. Besides, measures to improve the VSCs removal in BTF are proposed in the context of key influencing factors. Finally, the review assesses the new challenges of BTF for sewer emissions treatment, namely with respect to the performance of BTF for greenhouse gases (GHG) treatment.

A review of the biotransformations of priority pharmaceuticals in biological wastewater treatment processes.

Wastewater effluent discharges have been considered as one of the main sources of synthetic chemicals entering into the aquatic environment. Even though they occur at low concentrations, pharmaceutically active compounds (PhACs) can have an impact on ecological toxicity that affects aquatic organisms. Moreover, new regulations in development toward preserving water quality reinforces the increasing need to monitor and abate some PhACs in wastewater treatment plants (WWTPs), where they are typically only partially eliminated. Unlike most previous reviews, we have focussed on how the main biological and chemical molecular factors impact the biotransformations of key PhACs in biological WWTP processes. Biotransformations have been found to be an important contributor towards the removal of PhACs from WWTP effluents. This review paper critically assesses these aspects and the recent advances that have been achieved in wastewater treatment processes for biodegradation of 7 PhACs; namely the non-steroidal anti-inflammatory drug (NSAID) diclofenac (DCF); the macrolide antibiotics azithromycin (AZM), erythromycin (ERY) and clarithromycin (CLR); the two natural estrogens estrone (E1) and 17ß-estradiol (E2), and the synthetic estrogen 17α-ethinylesradiol (EE2). These represent the micropollutants of the EU Watch list in Decision 2015/495/EU that are most relevant to WWTPs due to their frequent detection. The metabolic pathways, transformation products and impact of relevant factors to biological WWTP processes is addressed in this review. The biokinetics of PhAC biodegradation in different engineered bioprocesses is also discussed. Promising technologies and operational strategies that are likely to have a high impact on controlling PhAC releases are highlighted and future research needs are also proposed.

Community profile governs substrate competition in polyhydroxyalkanoate (PHA)-producing mixed cultures.

Polyhydroxyalkanoates (PHAs) are biobased, biodegradable polymers that can be produced efficiently by mixed microbial cultures (MMCs) at low cost. Substrate preferences have been found to vary depending on the microbial composition in the MMCs. In this study, the competition between the uptake of different substrates has been related for the first time to the abundance of certain microbial communities. With a higher abundance of Plasticicumulans enriched in the culture, the inhibitory effect of butyrate and valerate on the uptake of acetate and propionate increased and the hydroxybutyrate:hydroxyvalerate (HB:HV) ratio in the final PHA polymer approached the theoretical value calculated from the volatile fatty acid (VFA) composition. This finding can help understanding of the metabolism of PHA accumulating microorganisms and thus predict better the VFA consumption and PHA composition.

Metabolite identification of ibuprofen biodegradation by Patulibacter medicamentivorans under aerobic conditions.

Ibuprofen (IBU) is a non-steroidal anti-inflammatory drug that is becoming increasingly recognized as an important micropollutant to be monitored in wastewater treatment plants (WWTP), since it has been detected in effluents at the µg L-1 level. The IBU metabolites from biological degradation are not completely understood and can represent a threat to natural aquatic systems. P. medicamentivorans was previously isolated from WWTP sludge and found to be capable of IBU degradation. The aerobic biodegradation of ibuprofen by this organism was investigated in a batch lab-scale reactor for the identification of the metabolites formed. The metabolites were analysed and putatively identified by HPLC-DAD-MS/MS and GC-MS and biodegradation pathways were proposed. The toxicity and the biodegradability potential of the metabolites were also investigated. The results showed that IBU biotransformation was achieved by hydroxylation followed by the formation of a carboxylic acid in the IBU molecule and by the formation of a catechol, allowing the aromatic ring cleavage. Two biodegradation pathways were proposed: in one, the metabolites generated from the enzymatic action correspond to a less biodegradable chemical structure of the intermediate products (isobutylbenzene and 3-isobutylphenol), with comparatively higher toxicity; in the other mechanism, more oxidable chemical structures were formed with less toxicity and higher biodegradability. This suggests that the biodegradation of IBU by P. medicamentivorans can take place by more than one mechanism regarding the enzymes formed by this Gram-positive bacterium, with subsequent oxidation of the parent compound to overall more soluble and less toxic compounds to fish, daphnia and green algae.

Oerskovia paurometabola can efficiently decolorize azo dye Acid Red 14 and remove its recalcitrant metabolite.

The biodegradation of dyes remains one of the biggest challenges of textile wastewater. Azo dyes are one of the most commonly employed dye classes, and biological treatment processes tend to generate recalcitrant aromatic amines, which are more toxic than the parent dye molecule. This study aimed to isolate bacterial strains with the capacity to degrade both the azo dye and the resulting aromatic amines towards the development of a simple and reliable treatment approach for dye-laden wastewaters. A mixed bacterial enrichment was first developed in an anaerobic-aerobic lab-scale sequencing batch reactor (SBR) fed with a synthetic textile wastewater containing the model textile azo dye Acid Red 14 (AR14). Eighteen bacterial strains were isolated from the SBR, including members of the Acinetobacter, Pseudomonas and Oerskovia genera, Oerskovia paurometabola presenting the highest decolorization capacity (91% after 24 h in static anaerobic culture). Growth assays supported that this is a facultative bacterium, and decolorization batch tests with 20-100 mg AR14 L-1 in a synthetic textile wastewater supplemented with yeast extract indicated that O. paurometabola has a high color removal capacity for a significant range of AR14 concentrations. In addition, a model typically used to describe biodegradation of xenobiotic compounds was adjusted to the results, to predict AR14 biodegradation time profiles at different initial concentrations. HPLC analysis confirmed that decolorization occurred through azo bond reduction under anaerobic conditions, the azo dye being completely reduced after 24 h of anaerobic incubation for the range of concentrations tested. Interestingly, partial (up to 63%) removal of one of the resulting aromatic amines (4-amino-naphthalene-1-sulfonic acid) was observed when subsequently subjected to aerobic conditions. Overall, this work showed the azo dye biodegradation potential of specific bacterial strains isolated from mixed culture bioreactors, reporting for the first time the decolorization capacity of an Oerskovia sp. with further biodegradation of a recalcitrant sulfonated aromatic amine metabolite.

Nitrous oxide emissions from a full-scale biological aerated filter (BAF) subject to seawater infiltration.

The increase of salt concentrations in influent wastewaters will be a consequence of the sea level rises in coastal areas due to climate change and the future use of seawater to flush toilets as a cost-attractive option for alternative water resources. Yet, little is known about the salinity effect on full-scale wastewater treatment plants (WWTPs) performance and on greenhouse gas (GHG) emissions, such as nitrous oxide (N2O). This study aimed at quantifying the N2O emissions of a full-scale biological aerated filter (BAF) and to correlate the dynamic behavior of the emissions with the process conditions and the periods of infiltration of seawater. A full-scale BAF was monitored for 3 months to assess both their gaseous and liquid N2O fluxes. The total average daily N2O emissions of the plant were 6.16 g N-N2O/kg of NH4-N removed. For the first time at full-scale, a correlation between the N2O emissions and the wastewater influent conductivity (salinity) was found, in which the increase in seawater infiltration in the sewer at high tide augments the daily N2O production and emission to 13.78 g N-N2O/kg of NH4-N removed. The proportional increase in influent conductivity and the N2O emission factor in this WWTP suggested that periods of high conductivity could serve as an indicator of increased N2O emissions by the plant. Furthermore, the operational conditions and the wastewater influent characteristics that influence the N2O emissions were identified as being the dissolved oxygen (DO) dynamics due to the filter washing steps, leading to rapid transitions from oxic to sub-oxic conditions, as well as the (re-)adaptation of microbial consortia due to the dynamics of the biofilm thickness associated to the daily washing process. This study shows the impact that the washing process and seawater infiltration has on the N2O emissions of a BAF and contributes to a better understanding of the operational conditions impacting the emissions in WWTPs.

Application of dissolved oxygen (DO) level control for polyhydroxyalkanoate (PHA) accumulation with concurrent nitrification in surplus municipal activated sludge.

Mixed microbial cultures are a viable means for polyhydroxyalkanoate (PHA) production, which can produce polymers of commercial quality with high yields. Various PHA co-polymer blends can be produced by surplus full-scale municipal activated sludge fed with fermented waste feedstocks. In biological nutrient removal, ammonia is converted to nitrate by ammonia and nitrite oxidizing bacteria (AOBs and NOBs) through nitrification and removed as nitrogen gas through denitrification. Activated sludge can be enriched with significant PHA storage potential alongside nitrogen removal by denitrifying heterotrophic and nitrifying autotrophic bacteria. The latter adds complexity and aeration demand during the aerobic side-stream PHA accumulation stage since fermented organic residuals often contain significant amounts of ammonia. In the present work, the influence of dissolved oxygen (DO) levels on both PHA accumulation and nitrification rates for a municipal activated sludge were evaluated. The objective was to identify potential for a DO control strategy for PHA accumulation, which would mitigate the unnecessary nitrification activity during PHA production. A much higher apparent Michaelis-Menten DO affinity for volatile fatty acid (VFA) consumption (KDO _VFA 0.1 ± 0.06 mg/L) was found as compared to nitrification (KDO _NH4 2.87 ± 1.31 mg/L). Consequently, with lower DO levels, PHA production was not limited by oxygen supply, while nitrogen was removed by simultaneous nitrification and denitrification processes. This study suggests a method for PHA accumulation using nitrifying activated sludge, while feeding ammonia-containing organic feedstocks by means of DO level control where: (1) NOB activity and growth are both mitigated, (2) nitrogen removal is facilitated, (3) alkalinity is controlled through simultaneous denitrification, and (4) energy demand for aeration is reduced.

Bioaugmentation of membrane bioreactor with Achromobacter denitrificans strain PR1 for enhanced sulfamethoxazole removal in wastewater.

Achromobacter denitrificans strain PR1, previously found to harbour specific degradation pathways with high sulfamethoxazole (SMX) degradation rates, was bioaugmented into laboratory-scale membrane bioreactors (MBRs) operated under aerobic conditions to treat SMX-containing real domestic wastewater. Different hydraulic retention times (HRTs), which is related to reaction time and loading rates, were considered and found to affect the SMX removal efficiency. The availability of primary substrates was important in both bioaugmented and non-bioaugmented activated sludge (AS) for cometabolism of SMX. High HRT (24 h) resulted in low food to microorganism ratio (F/M) and low SMX removal, due to substrate limitation. Decrease in HRT from 24 h to 12 h, 6 h and finally 4 h led to gradual increases in primary substrates availability, e.g. organic compounds and ammonia, resulted in increased SMX removal efficiency and degradation rate, and is more favorable for high-rate wastewater treatment processes. After inoculation into the MBRs, the bioaugmentation strain was sustained in the reactor for a maximum of 31 days even though a significant decrease in abundance was observed. The bioaugmented MBRs showed enhanced SMX removal, especially under SMX shock loads compared to the control MBRs. The results of this study indicate that re-inoculation is required regularly after a period of time to maintain the removal efficiency of the target compound.