Scientific opinion on the ANSES analysis of Annex I of the EC proposal COM (2023) 411 (EFSA-Q-2024-00178).

EFSA was asked by the European Parliament to provide a scientific opinion on the analysis by the French Agency for Food, Environmental and Occupational Health & Safety (ANSES) of Annex I of the European Commission proposal for a regulation 'on plants obtained by certain new genomic techniques (NGTs) and their food and feed, and amending regulation (EU) 2017/625'. The Panel on genetically modified organisms (GMO) assessed the opinion published by ANSES, which focuses on (i) the need to clarify the definitions and scope, (ii) the scientific basis for the equivalence criteria and (iii) the need to take potential risks from category 1 NGT plants into account. The EFSA GMO Panel considered the ANSES analysis and comments on various terms used in the criteria in Annex I of the European Commission proposal and discussed definitions based on previous EFSA GMO Panel opinions. The EFSA GMO Panel concluded that the available scientific literature shows that plants containing the types and numbers of genetic modifications used as criteria to identify category 1 NGT plants in the European Commission proposal do exist as the result of spontaneous mutations or random mutagenesis. Therefore, it is scientifically justified to consider category 1 NGT plants as equivalent to conventionally bred plants with respect to the similarity of genetic modifications and the similarity of potential risks. The EFSA GMO Panel did not identify any additional hazards and risks associated with the use of NGTs compared to conventional breeding techniques in its previous Opinions.

A phased genome of the highly heterozygous 'Texas' almond uncovers patterns of allele-specific expression linked to heterozygous structural variants.

The vast majority of traditional almond varieties are self-incompatible, and the level of variability of the species is very high, resulting in a high-heterozygosity genome. Therefore, information on the different haplotypes is particularly relevant to understand the genetic basis of trait variability in this species. However, although reference genomes for several almond varieties exist, none of them is phased and has genome information at the haplotype level. Here, we present a phased assembly of genome of the almond cv. Texas. This new assembly has 13% more assembled sequence than the previous version of the Texas genome and has an increased contiguity, in particular in repetitive regions such as the centromeres. Our analysis shows that the 'Texas' genome has a high degree of heterozygosity, both at SNPs, short indels, and structural variants level. Many of the SVs are the result of heterozygous transposable element insertions, and in many cases, they also contain genic sequences. In addition to the direct consequences of this genic variability on the presence/absence of genes, our results show that variants located close to genes are often associated with allele-specific gene expression, which highlights the importance of heterozygous SVs in almond.

Technical Note on the quality of DNA sequencing for the molecular characterisation of genetically modified plants.

As part of the risk assessment (RA) requirements for genetically modified (GM) plants, according to Regulation (EU) No 503/2013 and the EFSA guidance on the RA of food and feed from GM plants (EFSA GMO Panel 2011), applicants need to perform a molecular characterisation of the DNA sequences inserted in the GM plant genome. This Technical Note to the applicants puts together requirements and recommendations for the quality assessment of the methodology, analysis and reporting when DNA sequencing is used for the molecular characterisation of GM plants. In particular, it applies to the use of Sanger sequencing and next-generation sequencing for the characterisation of the inserted genetic material and its flanking regions at each insertion site, the determination of the copy number of all detectable inserts and the analysis of the genetic stability of the inserts. This updated document replaces the EFSA 2018 Technical Note and reflects the current knowledge in scientific-technical methods for generating and verifying, in a standardised manner, DNA sequencing data in the context of RA of GM plants. It does not take into consideration the verification and validation of the detection method which remains under the remit of the Joint Research Centre (JRC).

Deciphering the Genetic Basis of Allelopathy in japonica Rice Cultivated in Temperate Regions Using a Genome-Wide Association Study.

Allelopathy has been considered as a natural method of weed control. Despite the nature of allelochemical compounds has been studied, little is known about the genetic basis underlying allelopathy. However, it is known that rice exhibits diverse allelopathic potentials across varieties, and breeding for rice plants exhibiting allelopathic potential conferring an advantage against weeds in paddy fields would be highly desirable. Knowledge of the gene factors and the identification of the genomic regions responsible for allelopathy would facilitate breeding programs. Taking advantage of the existing genetic diversity in rice, particularly in temperate japonica rice, we conducted a comprehensive investigation into the genetic determinants that contribute to rice allelopathy. Employing Genome-Wide Association Study, we identified four Quantitative Trait Loci, with the most promising loci situated on chromosome 2 and 5. Subsequent inspection of the genes located within these QTLs revealed genes associated with the biosynthesis of secondary metabolites such as Phenylalanine Ammonia Lyase (PAL), a key enzyme in the synthesis of phenolic compounds, and two genes coding for R2R3-type MYB transcription factors. The identification of these two QTLs associated to allelopathy in rice provides a useful tool for further exploration and targeted breeding strategies.

Transposons are important contributors to gene expression variability under selection in rice populations.

Transposable elements (TEs) are an important source of genome variability. Here, we analyze their contribution to gene expression variability in rice by performing a TE insertion polymorphism expression quantitative trait locus mapping using expression data from 208 varieties from the Oryza sativa ssp. indica and O. sativa ssp. japonica subspecies. Our data show that TE insertions are associated with changes of expression of many genes known to be targets of rice domestication and breeding. An important fraction of these insertions were already present in the rice wild ancestors, and have been differentially selected in indica and japonica rice populations. Taken together, our results show that small changes of expression in signal transduction genes induced by TE insertions accompany the domestication and adaptation of rice populations.

Transposable element evolution in plant genome ecosystems.

The relationship of transposable elements (TEs) with their host genomes has usually been seen as an arms race between TEs and their host genomes. Consequently, TEs are supposed to amplify by bursts of transposition, when the TE escapes host surveillance, followed by long periods of TE quiescence and efficient host control. Recent data obtained from an increasing number of assembled plant genomes and resequencing population datasets show that TE dynamics is more complex and varies among TE families and their host genomes. This variation ranges from large genomes that accommodate large TE populations to genomes that are very active in TE elimination, and from inconspicuous elements with very low activity to elements with high transposition and elimination rates. The dynamics of each TE family results from a long history of interaction with the host in a genome populated by many other TE families, very much like an evolving ecosystem.

Improved prime editing allows for routine predictable gene editing in Physcomitrium patens.

Efficient and precise gene editing is the gold standard of any reverse genetic study. The recently developed prime editing approach, a modified CRISPR/Cas9 [clustered regularly interspaced palindromic repeats (CRISPR)/CRISPR-associated protein] editing method, has reached the precision goal but its editing rate can be improved. We present an improved methodology that allows for routine prime editing in the model plant Physcomitrium patens, whilst exploring potential new prime editing improvements. Using a standardized protoplast transfection procedure, multiple prime editing guide RNA (pegRNA) structural and prime editor variants were evaluated targeting the APT reporter gene through direct plant selection. Together, enhancements of expression of the prime editor, modifications of the 3' extension of the pegRNA, and the addition of synonymous mutation in the reverse transcriptase template sequence of the pegRNA dramatically improve the editing rate without affecting the quality of the edits. Furthermore, we show that prime editing is amenable to edit a gene of interest through indirect selection, as demonstrated by the generation of a Ppdek10 mutant. Additionally, we determine that a plant retrotransposon reverse transcriptase enables prime editing. Finally, we show for the first time the possibility of performing prime editing with two independently coded peptides.

Updated scientific opinion on plants developed through cisgenesis and intragenesis.

In 2012, EFSA issued an opinion on plants developed through cisgenesis and intragenesis. With the development of New Genomic Techniques (NGTs) in the last decade, cisgenic and intragenic plants can now be obtained with the insertion of a desired sequence in a precise location of the genome. EFSA has been requested by European Commission to provide an updated scientific opinion on the safety and the risk assessment of plants developed through cisgenesis and intragenesis, in order to (i) identify potential risks, comparing them with those posed by plants obtained by conventional breeding and Established Genomic Techniques (EGTs) and (ii) to determine the applicability of current guidelines for the risk assessment of cisgenic and intragenic plants. The conclusions of the previous EFSA opinion were reviewed, taking into consideration the new guidelines and the recent literature. The GMO panel concludes that no new risks are identified in cisgenic and intragenic plants obtained with NGTs, as compared with those already considered for plants obtained with conventional breeding and EGTs. There are no new data since the publication of the 2012 EFSA opinion that would challenge the conclusions raised in that document. The conclusions of the EFSA 2012 Scientific Opinion remain valid. The EFSA GMO Panel reiterates from these conclusions that with respect to the source of DNA and the safety of the gene product, the hazards arising from the use of a related plant-derived gene by cisgenesis are similar to those from conventional plant breeding, whereas additional hazards may arise for intragenic plants. Furthermore, the EFSA GMO Panel considers that cisgenesis and intragenesis make use of the same transformation techniques as transgenesis, and therefore, with respect to the alterations to the host genome, cisgenic, intragenic and transgenic plants obtained by random insertion do not cause different hazards. Compared to that, the use of NGTs reduces the risks associated with potential unintended modifications of the host genome. Thus, fewer requirements may be needed for the assessment of cisgenic and intragenic plants obtained through NGTs, due to site-directed integration of the added genetic material. Moreover, the GMO panel concludes that the current guidelines are partially applicable and sufficient. On a case-by-case basis, a lesser amount of data might be needed for the risk assessment of cisgenic or intragenic plants obtained through NGTs.

Absence of major epigenetic and transcriptomic changes accompanying an interspecific cross between peach and almond.

Hybridization has been widely used in breeding of cultivated species showing low genetic variability, such as peach (Prunus persica). The merging of two different genomes in a hybrid often triggers a so-called "genomic shock" with changes in DNA methylation and in the induction of transposable element expression and mobilization. Here, we analysed the DNA methylation and transcription levels of transposable elements and genes in leaves of Prunus persica and Prunus dulcis and in an F1 hybrid using high-throughput sequencing technologies. Contrary to the "genomic shock" expectations, we found that the overall levels of DNA methylation in the transposable elements in the hybrid are not significantly altered compared with those of the parental genomes. We also observed that the levels of transcription of the transposable elements in the hybrid are in most cases intermediate as compared with that of the parental species and we have not detected cases of higher transcription in the hybrid. We also found that the proportion of genes whose expression is altered in the hybrid compared with the parental species is low. The expression of genes potentially involved in the regulation of the activity of the transposable elements is not altered. We can conclude that the merging of the two parental genomes in this Prunus persica x Prunus dulcis hybrid does not result in a "genomic shock" with significant changes in the DNA methylation or in the transcription. The absence of major changes may facilitate using interspecific peach x almond crosses for peach improvement.

Transposable element polymorphisms improve prediction of complex agronomic traits in rice.

KEY MESSAGE: Transposon insertion polymorphisms can improve prediction of complex agronomic traits in rice compared to using SNPs only, especially when accessions to be predicted are less related to the training set. Transposon insertion polymorphisms (TIPs) are significant sources of genetic variation. Previous work has shown that TIPs can improve detection of causative loci on agronomic traits in rice. Here, we quantify the fraction of variance explained by single nucleotide polymorphisms (SNPs) compared to TIPs, and we explore whether TIPs can improve prediction of traits when compared to using only SNPs. We used eleven traits of agronomic relevance from by five different rice population groups (Aus, Indica, Aromatic, Japonica, and Admixed), 738 accessions in total. We assess prediction by applying data split validation in two scenarios. In the within-population scenario, we predicted performance of improved Indica varieties using the rest of Indica accessions. In the across population scenario, we predicted all Aromatic and Admixed accessions using the rest of populations. In each scenario, Bayes C and a Bayesian reproducible kernel Hilbert space regression were compared. We find that TIPs can explain an important fraction of total genetic variance and that they also improve genomic prediction. In the across population prediction scenario, TIPs outperformed SNPs in nine out of the eleven traits analyzed. In some traits like leaf senescence or grain width, using TIPs increased predictive correlation by 30-50%. Our results evidence, for the first time, that TIPs genotyping can improve prediction on complex agronomic traits in rice, especially when accessions to be predicted are less related to training accessions.

Evaluation of existing guidelines for their adequacy for the food and feed risk assessment of genetically modified plants obtained through synthetic biology.

Synthetic biology (SynBio) is an interdisciplinary field at the interface of molecular engineering and biology aiming to develop new biological systems and impart new functions to living cells, tissues and organisms. EFSA has been asked by the European Commission to evaluate SynBio developments in agri-food with the aim of identifying the adequacy and sufficiency of existing guidelines for risk assessment and determine if updated guidance is needed. In this context, the GMO Panel has previously adopted an Opinion evaluating the SynBio developments in agri-food/feed and the adequacy and sufficiency of existing guidelines for the molecular characterisation and environmental risk assessment of genetically modified plants (GMPs) obtained through SynBio and reaching the market in the next decade. Complementing the above, in this Opinion, the GMO Panel evaluated the adequacy and sufficiency of existing guidelines for the food and feed risk assessment of GMPs obtained through SynBio. Using selected hypothetical case studies, the GMO Panel did not identify novel potential hazards and risks that could be posed by food and feed from GMPs obtained through current and near future SynBio approaches; considers that the existing guidelines are adequate and sufficient in some Synbio applications; in other cases, existing guidelines may be just adequate and hence need updating; areas needing updating include those related to the safety assessment of new proteins and the comparative analysis. The GMO Panel recommends that future guidance documents provide indications on how to integrate the knowledge available from the SynBio design and modelling in the food and feed risk assessment and encourages due consideration to be given to food and feed safety aspects throughout the SynBio design process as a way to facilitate the risk assessment of SynBio GMPs and reduce the amount of data required.

In vivo and in vitro random mutagenesis techniques in plants.

Mutations are changes in the genetic material that may be transmitted to subsequent generations. Mutations appear spontaneously in nature and are one of the underlying driving forces of evolution. In plants, in vivo and in vitro random mutagenesis relies on the application of physical and chemical mutagens to increase the frequency of mutations thus accelerating the selection of varieties with important agronomic traits. The European Commission has requested EFSA to provide a more detailed description of in vivo and in vitro random mutagenesis techniques and the types of mutations and mechanisms involved, to be able to conclude on whether in vivo and in vitro random mutagenesis techniques are to be considered different techniques. To address the European Commission request, a literature search was conducted to collect information on the random mutagenesis techniques used in plants both in vivo and in vitro, on the type of mutations generated by such techniques and on the molecular mechanisms underlying formation of those mutations. The GMO Panel concludes that most physical and chemical mutagenesis techniques have been applied both in vivo and in vitro; the mutation process and the repair mechanisms act at cellular level and thus there is no difference between application of the mutagen in vivo or in vitro; and the type of mutations induced by a specific mutagen are expected to be the same, regardless of whether such mutagen is applied in vivo or in vitro. Indeed, the same mutation and the derived trait in a given plant species can be potentially obtained using both in vivo and in vitro random mutagenesis and the resulting mutants would be indistinguishable. Therefore, the GMO Panel concludes that the distinction between plants obtained by in vitro or in vivo approaches is not justified.

A vertically transmitted amalgavirus is present in certain accessions of the bryophyte Physcomitrium patens.

In the last few years, next-generation sequencing techniques have started to be used to identify new viruses infecting plants. This has allowed to rapidly increase our knowledge on viruses other than those causing symptoms in economically important crops. Here we used this approach to identify a virus infecting Physcomitrium patens that has the typical structure of the double-stranded RNA endogenous viruses of the Amalgaviridae family, which we named Physcomitrium patens amalgavirus 1, or PHPAV1. PHPAV1 is present only in certain accessions of P. patens, where its RNA can be detected throughout the cell cycle of the plant. Our analysis demonstrates that PHPAV1 can be vertically transmitted through both paternal and maternal germlines, in crosses between accessions that contain the virus with accessions that do not contain it. This work suggests that PHPAV1 can replicate in genomic backgrounds different from those that actually contain the virus and opens the door for future studies on virus-host coevolution.

Amplification dynamics of miniature inverted-repeat transposable elements and their impact on rice trait variability.

Transposable elements (TEs) are a rich source of genetic variability. Among TEs, miniature inverted-repeat TEs (MITEs) are of particular interest as they are present in high copy numbers in plant genomes and are closely associated with genes. MITEs are deletion derivatives of class II transposons, and can be mobilized by the transposases encoded by the latter through a typical cut-and-paste mechanism. However, MITEs are typically present at much higher copy numbers than class II transposons. We present here an analysis of 103 109 transposon insertion polymorphisms (TIPs) in 738 Oryza sativa genomes representing the main rice population groups. We show that an important fraction of MITE insertions has been fixed in rice concomitantly with its domestication. However, another fraction of MITE insertions is present at low frequencies. We performed MITE TIP-genome-wide association studies (TIP-GWAS) to study the impact of these elements on agronomically important traits and found that these elements uncover more trait associations than single nucleotide polymorphisms (SNPs) on important phenotypes such as grain width. Finally, using SNP-GWAS and TIP-GWAS we provide evidence of the replicative amplification of MITEs.

Evaluation of existing guidelines for their adequacy for the molecular characterisation and environmental risk assessment of genetically modified plants obtained through synthetic biology.

Synthetic Biology (SynBio) is an interdisciplinary field at the interface of engineering and biology aiming to develop new biological systems and impart new functions to living cells. EFSA has been asked by the European Commission to evaluate SynBio developments in agri-food with the aim of identifying the adequacy of existing guidelines for risk assessment and determine if updated guidance is needed. The scope of this opinion covers the molecular characterisation and environmental risk assessment of such genetically modified plants obtained through SynBio, meant to be for cultivation or food and feed purposes. The previous work on SynBio by the non-food scientific Committees (2014, 2015) was used and complemented with the output of a horizon scanning exercise, which was commissioned by the EFSA to identify the most realistic and forthcoming SynBio cases of relevance to this remit. The horizon scan did not identify other sectors/advances in addition to the six SynBio categories previously identified by the non-food scientific committees of the European Commission. The exercise did show that plant SynBio products reaching the market in the near future (next decade) are likely to apply SynBio approaches to their development using existing genetic modification and genome editing technologies. In addition, three hypothetical SynBio case studies were selected by the working group of the Panel on Genetically Modified Organisms (GMO), to further support the scoping exercise of this Scientific Opinion. Using the selected cases, the GMO Panel concludes that the requirements of the EU regulatory framework and existing EFSA guidelines are adequate for the risk assessment of SynBio products to be developed in the next 10 years, although specific requirements may not apply to all products. The GMO Panel acknowledges that as SynBio developments evolve, a need may exist to adjust the guidelines to ensure they are adequate and sufficient.

A blueprint for gene function analysis through Base Editing in the model plant Physcomitrium (Physcomitrella) patens.

CRISPR-Cas9 has proven to be highly valuable for genome editing in plants, including the model plant Physcomitrium patens. However, the fact that most of the editing events produced using the native Cas9 nuclease correspond to small insertions and deletions is a limitation. CRISPR-Cas9 base editors enable targeted mutation of single nucleotides in eukaryotic genomes and therefore overcome this limitation. Here, we report two programmable base-editing systems to induce precise cytosine or adenine conversions in P. patens. Using cytosine or adenine base editors, site-specific single-base mutations can be achieved with an efficiency up to 55%, without off-target mutations. Using the APT gene as a reporter of editing, we could show that both base editors can be used in simplex or multiplex, allowing for the production of protein variants with multiple amino-acid changes. Finally, we set up a co-editing selection system, named selecting modification of APRT to report gene targeting (SMART), allowing up to 90% efficiency site-specific base editing in P. patens. These two base editors will facilitate gene functional analysis in P. patens, allowing for site-specific editing of a given base through single sgRNA base editing or for in planta evolution of a given gene through the production of randomly mutagenised variants using multiple sgRNA base editing.

Applicability of the EFSA Opinion on site-directed nucleases type 3 for the safety assessment of plants developed using site-directed nucleases type 1 and 2 and oligonucleotide-directed mutagenesis.

The European Commission requested the EFSA Panel on Genetically Modified Organisms (GMO) to assess whether section 4 (hazard identification) and the conclusions of EFSA's Scientific opinion on the risk assessment of plants developed using zinc finger nuclease type 3 technique (ZFN-3) and other site-directed nucleases (SDN) with similar function are valid for plants developed via SDN-1, SDN-2 and oligonucleotide-directed mutagenesis (ODM). In delivering this Opinion, the GMO Panel compared the hazards associated with plants produced via SDN-1, SDN-2 and ODM with those associated with plants obtained via both SDN-3 and conventional breeding. Unlike for SDN-3 methods, the application of SDN-1, SDN-2 and ODM approaches aims to modify genomic sequences in a way which can result in plants not containing any transgene, intragene or cisgene. Consequently, the GMO Panel concludes that those considerations which are specifically related to the presence of a transgene, intragene or cisgene included in section 4 and the conclusions of the Opinion on SDN-3 are not relevant to plants obtained via SDN-1, SDN-2 or ODM as defined in this Opinion. Overall, the GMO Panel did not identify new hazards specifically linked to the genomic modification produced via SDN-1, SDN-2 or ODM as compared with both SDN-3 and conventional breeding. Furthermore, the GMO Panel considers that the existing Guidance for risk assessment of food and feed from genetically modified plants and the Guidance on the environmental risk assessment of genetically modified plants are sufficient but are only partially applicable to plants generated via SDN-1, SDN-2 or ODM. Indeed, those guidance documents' requirements that are linked to the presence of exogenous DNA are not relevant for the risk assessment of plants developed via SDN-1, SDN-2 or ODM approaches if the genome of the final product does not contain exogenous DNA.

Different Families of Retrotransposons and DNA Transposons Are Actively Transcribed and May Have Transposed Recently in Physcomitrium (Physcomitrella) patens.

Similarly to other plant genomes of similar size, more than half of the genome of P. patens is covered by Transposable Elements (TEs). However, the composition and distribution of P. patens TEs is quite peculiar, with Long Terminal Repeat (LTR)-retrotransposons, which form patches of TE-rich regions interleaved with gene-rich regions, accounting for the vast majority of the TE space. We have already shown that RLG1, the most abundant TE in P. patens, is expressed in non-stressed protonema tissue. Here we present a non-targeted analysis of the TE expression based on RNA-Seq data and confirmed by qRT-PCR analyses that shows that, at least four LTR-RTs (RLG1, RLG2, RLC4 and tRLC5) and one DNA transposon (PpTc2) are expressed in P. patens. These TEs are expressed during development or under stresses that P. patens frequently faces, such as dehydratation/rehydratation stresses, suggesting that TEs have ample possibilities to transpose during P. patens life cycle. Indeed, an analysis of the TE polymorphisms among four different P. patens accessions shows that different TE families have recently transposed in this species and have generated genetic variability that may have phenotypic consequences, as a fraction of the TE polymorphisms are within or close to genes. Among the transcribed and mobile TEs, tRLC5 is particularly interesting as it concentrates in a single position per chromosome that could coincide with the centromere, and its expression is specifically induced in young sporophyte, where meiosis takes place.

Genomics of Evolutionary Novelty in Hybrids and Polyploids.

It has long been recognized that hybridization and polyploidy are prominent processes in plant evolution. Although classically recognized as significant in speciation and adaptation, recognition of the importance of interspecific gene flow has dramatically increased during the genomics era, concomitant with an unending flood of empirical examples, with or without genome doubling. Interspecific gene flow is thus increasingly thought to lead to evolutionary innovation and diversification, via adaptive introgression, homoploid hybrid speciation and allopolyploid speciation. Less well understood, however, are the suite of genetic and genomic mechanisms set in motion by the merger of differentiated genomes, and the temporal scale over which recombinational complexity mediated by gene flow might be expressed and exposed to natural selection. We focus on these issues here, considering the types of molecular genetic and genomic processes that might be set in motion by the saltational event of genome merger between two diverged species, either with or without genome doubling, and how these various processes can contribute to novel phenotypes. Genetic mechanisms include the infusion of new alleles and the genesis of novel structural variation including translocations and inversions, homoeologous exchanges, transposable element mobilization and novel insertional effects, presence-absence variation and copy number variation. Polyploidy generates massive transcriptomic and regulatory alteration, presumably set in motion by disrupted stoichiometries of regulatory factors, small RNAs and other genome interactions that cascade from single-gene expression change up through entire networks of transformed regulatory modules. We highlight both these novel combinatorial possibilities and the range of temporal scales over which such complexity might be generated, and thus exposed to natural selection and drift.

Additional ORFs in Plant LTR-Retrotransposons.

LTR-retrotransposons share a common genomic organization in which the 5' long terminal repeat (LTR) is followed by the gag and pol genes and terminates with the 3' LTR. Although GAG-POL-encoded proteins are considered sufficient to accomplish the LTR-retrotransposon transposition, a number of elements carrying additional open reading frames (aORF) have been described. In some cases, the presence of an aORF can be explained by a phenomenon similar to retrovirus gene transduction, but in these cases the aORFs are present in only one or a few copies. On the contrary, many elements contain aORFs, or derivatives, in all or most of their copies. These aORFs are more frequently located between pol and 3' LTR, and they could be in sense or antisense orientation with respect to gag-pol. Sense aORFs include those encoding for ENV-like proteins, so called because they have some structural and functional similarities with retroviral ENV proteins. Antisense aORFs between pol and 3' LTR are also relatively frequent and, for example, are present in some characterized LTR-retrotransposon families like maize Grande, rice RIRE2, or Silene Retand, although their possible roles have been not yet determined. Here, we discuss the current knowledge about these sense and antisense aORFs in plant LTR-retrotransposons, suggesting their possible origins, evolutionary relevance, and function.