High-throughput virtual search of small molecules for controlling the mechanical stability of human CD4.

Protein mechanical stability determines the function of a myriad of proteins, especially proteins from the extracellular matrix. Failure to maintain protein mechanical stability may result in diseases and disorders such as cancer, cardiomyopathies, or muscular dystrophy. Thus, developing mutation-free approaches to enhance and control the mechanical stability of proteins using pharmacology-based methods may have important implications in drug development and discovery. Here, we present the first approach that employs computational high-throughput virtual screening and molecular docking to search for small molecules in chemical libraries that function as mechano-regulators of the stability of human cluster of differentiation 4, receptor of HIV-1. Using single-molecule force spectroscopy, we prove that these small molecules can increase the mechanical stability of CD4D1D2 domains over 4-fold in addition to modifying the mechanical unfolding pathways. Our experiments demonstrate that chemical libraries are a source of mechanoactive molecules and that drug discovery approaches provide the foundation of a new type of molecular function, that is, mechano-regulation, paving the way toward mechanopharmacology.

Stability study over time of clinical solutions of ziv-aflibercept prepared in infusion bags using a proper combination of physicochemical and functional strategies.

A range of biopharmaceutical products are used to target Vascular Endothelial Growth Factor (VEGF), including Eylea® (aflibercept, AFL) and Zaltrap® (ziv-aflibercept, ziv-AFL). The first is indicated for ophthalmological diseases such as neovascular (wet) age-related macular degeneration, while the second is used in the treatment of metastatic colorectal cancer. The stability of AFL in prefilled syringes has been widely studied; however, no research has yet been done on the stability of ziv-AFL in polyolefin infusion bags. Therefore, the purpose of the present research is to evaluate the stability of ziv-AFL (Zaltrap®) clinical solutions prepared under aseptic conditions in polyolefin infusion bags at two different concentrations, i.e. 4.0 and 0.6 mg/mL, and stored refrigerated in darkness at 2-8 °C for 14 days. With that aim, the ziv-AFL clinical solutions were assessed by analysing changes in its physicochemical and functional properties. The distribution of the particulates was studied over a range of 0.001-10 µm by Dynamic Light Scattering (DLS); oligomers were analysed by Size-Exclusion High-Performance Chromatography with Diode Array Detection (SE/HLPC-DAD); the secondary structure of the protein was studied by far UV Circular Dichroism (CD) and the tertiary structure by Intrinsic Tryptophan Fluorescence (IT-F) and Intrinsic Protein Fluorescence (IP-F); charge variants were assessed by Strong Cation Exchange Ultra-High-Performance Chromatography with UV detection (SCX/UHPLC-UV); functionality was evaluated by ELISA by measuring the biological activity as manifested in the extension of the immunological reaction of the ziv-AFL with its antigen (VEGF). Neither aggregation nor oligomerization were detected by the techniques mentioned above. Secondary and tertiary structures remained unchanged over the 14-day period, as did charge variants. The functionality observed initially was maintained along time. Therefore, it could be proposed that the ziv-AFL clinical solutions studied showed great physicochemical and functional stability over a period of two weeks, regardless of the concentration, i.e. 4 or 0.6 mg/mL.

Comprehensive biophysical and functional study of ziv-aflibercept: characterization and forced degradation.

Aflibercept (AFL) is an Fc fusion protein used in the treatment of colorectal cancers and different ophthalmological diseases. There are two medicines in which AFL is the active substance: Zaltrap and Eylea, referred as ziv-AFL and AFL respectively. No proper accelerated degradation studies were published on either AFL or ziv-AFL. These studies are essential during research, development and manufacturing stages. Here, we characterized ziv-AFL and submitted it to different stress conditions: light, 60 °C, freeze-thaw cycles, changes in pH, high hypertonic solution and strong denaturing conditions. We used an array of techniques to detect aggregation (SE-HPLC/DAD and DLS), changes in secondary structure (Far-UV circular dichroism), changes in conformation or tertiary structure (Intrinsic tryptophan fluorescence) and alterations in functionality (ELISA). Results indicate that aggregation is common degradation pathway. Two different types of aggregates were detected: dimers and high molecular weight aggregates attributed to ß-amyloid-like structures. Secondary structure was maintained in most of the stress tests, while conformation was altered by almost all the tests except for the freeze-thaw cycles. Functionality, evaluated by its immunochemical reaction with VEGF, was found to be stable but with decrease when exposed to light and with likely partial inactivation of the drug when pH was altered.

Tuning properties of biomimetic magnetic nanoparticles by combining magnetosome associated proteins.

The role of magnetosome associated proteins on the in vitro synthesis of magnetite nanoparticles has gained interest, both to obtain a better understanding of the magnetosome biomineralization process and to be able to produce novel magnetosome-like biomimetic nanoparticles. Up to now, only one recombinant protein has been used at the time to in vitro form biomimetic magnetite precipitates, being that a scenario far enough from what probably occurs in the magnetosome. In the present study, both Mms6 and MamC from Magnetococcus marinus MC-1 have been used to in vitro form biomimetic magnetites. Our results show that MamC and Mms6 have different, but complementary, effects on in vitro magnetite nucleation and growth. MamC seems to control the kinetics of magnetite nucleation while Mms6 seems to preferably control the kinetics for crystal growth. Our results from the present study also indicate that it is possible to combine both proteins to tune the properties of the resulting biomimetic magnetites. In particular, by changing the relative ratio of these proteins, better faceted and/or larger magnetite crystals with, consequently, different magnetic moment per particle could be obtained. This study provides with tools to obtain new biomimetic nanoparticles with a potential utility for biotechnological applications.

Comparative Stability Studies of Different Infliximab and Biosimilar CT-P13 Clinical Solutions by Combined Use of Physicochemical Analytical Techniques and Enzyme-Linked Immunosorbent Assay (ELISA).

BACKGROUND: There are two products in which infliximab is the active pharmaceutical ingredient. These are Remicade® (INF; reference product) and Remsima™/Inflectra™ (CT-P13; infliximab biosimilar). Remsima™/Inflectra™ are bioidentical products. Different recommendations have been made for the clinical solutions of each brand (Remicade® or Remsima™/Inflectra™) despite the manufacturer of the biosimilar claiming high levels of similarity to the innovator. OBJECTIVE: The objective of this study was to assess and compare stability against degradation and over time of different clinical infliximab solutions prepared from Remicade® and from Remsima™/Inflectra™ using a suitable set of characterization methods in line with the International Conference on Harmonisation of Technical Requirements for Registration of Pharmaceuticals for Human Use (ICH) recommendations. METHODS: Reconstituted solutions of INF and CT-P13 and dilutions as used in hospital were stored in glass vials (10 and 2 mg/mL) or in polyolefin infusion bags (0.4 mg/mL) refrigerated between 2 and 8 °C for 2 weeks. Regarding the physicochemical properties, the distribution of the particulates were studied over a range of 0.001-1 µm by dynamic light scattering (DLS) and oligomers up to 8 monomer were analyzed by native size-exclusion ultra-high-performance liquid chromatography with ultraviolet (UV)-visible detection coupled to (native) mass spectrometry (SE/UHPLC-UV-(native) MS); mass spectrometry was also used to evaluate natural aggregates and isoform profile; DLS was also employed to detect gross conformational changes by tracking the hydrodynamic radius (HR). The secondary structure of the proteins was studied by far UV circular dichroism (CD). The tertiary structure was investigated by intrinsic tryptophan fluorescence (IT-F). Reverse-phase ultra-high-performance liquid chromatography with UV detection (RP/UHPLC-UV) was used to analyze intact INF and CT-P13 for quantification purposes. Functionality was evaluated via the biological activity measured by the extension of the immunological reaction of the INF and the CT-P13 with its antigen, i.e., the tumor necrosis factor-α by enzyme-linked immunosorbent assay (ELISA). RESULTS: The stress applied to INF and CT-P13 solutions showed similar levels of aggregate formation, structural variation, and chemical modifications. The only noteworthy difference between INF and CT-P13 was detected in their behavior to freeze-thaw cycles, in which CT-P13 showed slightly more robustness. INF and CT-P13 showed identical CD spectra, similar to those reported for IgG1 in which there is dominance in ß sheet secondary structures; this typical conformation remained unmodified over time in INF and CT-P13. No significant changes were detected in the tertiary structure and no aggregates process was noticed over the time studied. Polydispersity slightly increased for the most concentrated solutions, while there were no meaningful differences in the HR in the solutions over time. The concentration of INF and CT-P13 also remained constant. Differences in the native isoform MS profile were detected, as expected by the different glycosylation pattern, with no important modification over time. Functionality was maintained over the test period (60 days) and was similar in all the solutions tested, with no differences between INF and biosimilar solutions. CONCLUSIONS: High levels of similarity were noticed in the behavior of INF and CT-P13 when subjected to stress. When stored refrigerated at between 2 and 8 °C and prepared as normally used in the hospital pharmacy, all solutions showed physicochemical and functional stability for all the concentrations tested and all containers, at least for the 14-day test period.

Two-Step Amyloid Aggregation: Sequential Lag Phase Intermediates.

The self-assembly of proteins into fibrillar structures called amyloid fibrils underlies the onset and symptoms of neurodegenerative diseases, such as Alzheimer's and Parkinson's. However, the molecular basis and mechanism of amyloid aggregation are not completely understood. For many amyloidogenic proteins, certain oligomeric intermediates that form in the early aggregation phase appear to be the principal cause of cellular toxicity. Recent computational studies have suggested the importance of nonspecific interactions for the initiation of the oligomerization process prior to the structural conversion steps and template seeding, particularly at low protein concentrations. Here, using advanced single-molecule fluorescence spectroscopy and imaging of a model SH3 domain, we obtained direct evidence that nonspecific aggregates are required in a two-step nucleation mechanism of amyloid aggregation. We identified three different oligomeric types according to their sizes and compactness and performed a full mechanistic study that revealed a mandatory rate-limiting conformational conversion step. We also identified the most cytotoxic species, which may be possible targets for inhibiting and preventing amyloid aggregation.

Molecular and Physicochemical Factors Governing Solubility of the HIV gp41 Ectodomain.

The HIV gp41 ectodomain (e-gp41) is an attractive target for the development of vaccines and drugs against HIV because of its crucial role in viral fusion to the host cell. However, because of the high insolubility of e-gp41, most biophysical and structural analyses have relied on the production of truncated versions removing the loop region of gp41 or the utilization of nonphysiological solubilizing conditions. The loop region of gp41 is also known as principal immunodominant domain (PID) because of its high immunogenicity, and it is essential for gp41-mediated HIV fusion. In this study we identify the aggregation-prone regions of the amino acid sequence of the PID and engineer a highly soluble mutant that preserves the trimeric structure of the wild-type e-gp41 under physiological pH. Furthermore, using a reverse mutagenesis approach, we analyze the role of mutated amino acids upon the physicochemical factors that govern solubility of e-gp41. On this basis, we propose a molecular model for e-gp41 self-association, which can guide the production of soluble e-gp41 mutants for future biophysical analyses and biotechnological applications.

The First Step of Amyloidogenic Aggregation.

The structural and dynamic characterization of the on-pathway intermediates involved in the mechanism of amyloid fibril formation is one of the major remaining biomedical challenges of our time. In addition to mature fibrils, various oligomeric structures are implicated in both the rate-limiting step of the nucleation process and the neuronal toxicity of amyloid deposition. Single-molecule fluorescence spectroscopy (SMFS) is an excellent tool for extracting most of the relevant information on these molecular systems, especially advanced multiparameter approaches, such as pulsed interleaved excitation (PIE). In our investigations of an amyloidogenic SH3 domain of α-spectrin, we have found dynamic oligomerization, even prior to incubation. Our single-molecule PIE experiments revealed that these species are small, mostly dimeric, and exhibit a loose and dynamic molecular organization. Furthermore, these experiments have allowed us to obtain quantitative information regarding the oligomer stability. These pre-amyloidogenic oligomers may potentially serve as the first target for fibrillization-prevention strategies.

Single-chain protein mimetics of the N-terminal heptad-repeat region of gp41 with potential as anti-HIV-1 drugs.

During HIV-1 fusion to the host cell membrane, the N-terminal heptad repeat (NHR) and the C-terminal heptad repeat (CHR) of the envelope subunit gp41 become transiently exposed and accessible to fusion inhibitors or Abs. In this process, the NHR region adopts a trimeric coiled-coil conformation that can be a target for therapeutic intervention. Here, we present an approach to rationally design single-chain protein constructs that mimic the NHR coiled-coil surface. The proteins were built by connecting with short loops two parallel NHR helices and an antiparallel one with the inverse sequence followed by engineering of stabilizing interactions. The constructs were expressed in Escherichia coli, purified with high yield, and folded as highly stable helical coiled coils. The crystal structure of one of the constructs confirmed the predicted fold and its ability to accurately mimic an exposed gp41 NHR surface. These single-chain proteins bound to synthetic CHR peptides with very high affinity, and furthermore, they showed broad inhibitory activity of HIV-1 fusion on various pseudoviruses and primary isolates.

Thermodynamic analysis of the binding of 2F5 (Fab and immunoglobulin G forms) to its gp41 epitope reveals a strong influence of the immunoglobulin Fc region on affinity.

Immunotherapies and vaccines based on the induction of broadly neutralizing monoclonal antibodies (bNAbs) have become outstanding strategies against HIV-1. Diverse bNAbs recognizing different regions of the HIV-1 envelope have been identified and extensively studied. However, there is little information about the thermodynamics of binding of these bNAbs and their epitopes. We used isothermal titration calorimetry to characterize thermodynamically the interactions between bNAb2F5 (in both the IgG and Fab forms) and its functional and core epitope peptides. We found that these interactions are enthalpically driven and opposed by a negative entropy change. The highest affinity was found for 2F5 IgG for its functional epitope, indicating that additional interactions involving residues flanking the core epitope contribute strongly to higher affinity. In addition, the strong influence of the Fc region on the binding affinity suggests long-range allosteric effects within IgG. Our results provide useful information for developing new therapeutics against HIV-1 and, in a broader scope, contribute to a better understanding of antigen-antibody recognition.

Distinct ubiquitin binding modes exhibited by SH3 domains: molecular determinants and functional implications.

SH3 domains constitute a new type of ubiquitin-binding domains. We previously showed that the third SH3 domain (SH3-C) of CD2AP binds ubiquitin in an alternative orientation. We have determined the structure of the complex between first CD2AP SH3 domain and ubiquitin and performed a structural and mutational analysis to decipher the determinants of the SH3-C binding mode to ubiquitin. We found that the Phe-to-Tyr mutation in CD2AP and in the homologous CIN85 SH3-C domain does not abrogate ubiquitin binding, in contrast to previous hypothesis and our findings for the first two CD2AP SH3 domains. The similar alternative binding mode of the SH3-C domains of these related adaptor proteins is characterised by a higher affinity to C-terminal extended ubiquitin molecules. We conclude that CD2AP/CIN85 SH3-C domain interaction with ubiquitin constitutes a new ubiquitin-binding mode involved in a different cellular function and thus changes the previously established mechanism of EGF-dependent CD2AP/CIN85 mono-ubiquitination.

Multimeric and differential binding of CIN85/CD2AP with two atypical proline-rich sequences from CD2 and Cbl-b*.

The CD2AP (CD2-associated protein) and CIN85 (Cbl-interacting protein of 85 kDa) adaptor proteins each employ three Src homology 3 (SH3) domains to cluster protein partners and ensure efficient signal transduction and down-regulation of tyrosine kinase receptors. Using NMR, isothermal titration calorimetry and small-angle X-ray scattering methods, we have characterized several binding modes of the N-terminal SH3 domain (SH3A) of CD2AP and CIN85 with two natural atypical proline-rich regions in CD2 (cluster of differentiation 2) and Cbl-b (Casitas B-lineage lymphoma), and compared these data with previous studies and published crystal structures. Our experiments show that the CD2AP-SH3A domain forms a type II dimer with CD2 and both type I and type II dimeric complexes with Cbl-b. Like CD2AP, the CIN85-SH3A domain forms a type II complex with CD2, but a trimeric complex with Cbl-b, whereby the type I and II interactions take place at the same time. Together, these results explain how multiple interactions among similar SH3 domains and ligands produce a high degree of diversity in tyrosine kinase, cell adhesion or T-cell signaling pathways.

Bulk and single-molecule fluorescence studies of the saturation of the DNA double helix using YOYO-3 intercalator dye.

We report a thorough photophysical characterization of the interactions between double-stranded DNA (dsDNA) and the trimethine cyanine homodimer dye YOYO-3. The fluorescence emission of this dye is enhanced by intercalation within the DNA double helix. We have explored the saturation of the dsDNA by bound YOYO-3 at the single-molecule level by studying the single-pair Förster resonance energy transfer (FRET) from an energy donor, Alexa Fluor 488, tagged at the 5' end of the double helix and the energy acceptor, YOYO-3, bound to the same DNA molecule. The spontaneous binding of YOYO-3 gives rise to an effective distribution of different FRET efficiencies and, therefore, donor-acceptor (D-A) distances. These distributions reveal the existence of multiple states of YOYO-3. Steady-state and time-resolved fluorescence and circular dichroism confirmed the presence of a DNA-bound aggregate of YOYO-3, conspicuous at high dye/base pair ratios. The spectral features of the aggregate suggest that it may have the structure of a parallel H-aggregate.

Early amyloidogenic oligomerization studied through fluorescence lifetime correlation spectroscopy.

Amyloidogenic protein aggregation is a persistent biomedical problem. Despite active research in disease-related aggregation, the need for multidisciplinary approaches to the problem is evident. Recent advances in single-molecule fluorescence spectroscopy are valuable for examining heterogenic biomolecular systems. In this work, we have explored the initial stages of amyloidogenic aggregation by employing fluorescence lifetime correlation spectroscopy (FLCS), an advanced modification of conventional fluorescence correlation spectroscopy (FCS) that utilizes time-resolved information. FLCS provides size distributions and kinetics for the oligomer growth of the SH3 domain of α-spectrin, whose N47A mutant forms amyloid fibrils at pH 3.2 and 37 °C in the presence of salt. The combination of FCS with additional fluorescence lifetime information provides an exciting approach to focus on the initial aggregation stages, allowing a better understanding of the fibrillization process, by providing multidimensional information, valuable in combination with other conventional methodologies.

A designed point mutant in Fis1 disrupts dimerization and mitochondrial fission.

Mitochondrial and peroxisomal fission are essential processes with defects resulting in cardiomyopathy and neonatal lethality. Central to organelle fission is Fis1, a monomeric tetratricopeptide repeat (TPR)-like protein whose role in assembly of the fission machinery remains obscure. Two nonfunctional, Saccharomyces cerevisiae Fis1 mutants (L80P or E78D/I85T/Y88H) were previously identified in genetic screens. Here, we find that these two variants in the cytosolic domain of Fis1 (Fis1ΔTM) are unexpectedly dimeric. A truncation variant of Fis1ΔTM that lacks an N-terminal regulatory domain is also found to be dimeric. The ability to dimerize is a property innate to the native Fis1ΔTM amino acid sequence as we find this domain is dimeric after transient exposure to elevated temperature or chemical denaturants and is kinetically trapped at room temperature. This is the first demonstration of a specific self-association in solution for the Fis1 cytoplasmic domain. We propose a three-dimensional domain-swapped model for dimerization that is validated by a designed mutation, A72P, which potently disrupts dimerization of wild-type Fis1. A72P also disrupts dimerization of nonfunctional variants, indicating a common structural basis for dimerization. The obligate monomer variant A72P, like the dimer-promoting variants, is nonfunctional in fission, consistent with a model in which Fis1 activity depends on its ability to interconvert between monomer and dimer species. These studies suggest a new functionally important manner in which TPR-containing proteins may reversibly self-associate.

Understanding the polymorphic behaviour of a mutant of the α-spectrin SH3 domain by means of two 1.1 Å resolution structures.

SH3 domains are small protein modules that mediate the assembly of specific protein complexes, typically via binding to proline-rich sequences in their respective binding partners. Most of the α-spectrin SH3-domain (Spc-SH3) structures determined to date using X-ray diffraction have been solved from crystals belonging to the orthorhombic space group P2(1)2(1)2(1) with a needle-like morphology. All of these orthorhombic crystals exhibited a rapid growth rate. In addition to this crystal form, the R21D mutant of Spc-SH3 crystallizes in a new crystal form in the presence of sodium formate at pH values higher than 6. This new crystal form grows at a slower rate and belongs to the hexagonal space group P6(5)22, with unit-cell parameters a = b = 42.9, c = 127.5 Å. When both polymorphs of the R21D mutant of Spc-SH3 are simultaneously present into the same solution, it has been observed that the hexagonal crystals grow at the expense of the orthorhombic crystals. The availability of 1.1 Šresolution structures for both crystal forms allows the identification of key features that could account for the observed polymorphic behaviour.

The effect of a proline residue on the rate of growth and the space group of alpha-spectrin SH3-domain crystals.

alpha-Spectrin SH3-domain (Spc-SH3) crystallization is characterized by very fast growth of the crystals in the presence of ammonium sulfate as a precipitant agent. The origin of this behaviour can be attributed to the presence of a proline residue that participates in a crystal contact mimicking the binding of proline-rich sequences to SH3 domains. This residue, Pro20, is located in the RT loop and is the main contact in one of the interfaces present in the orthorhombic Spc-SH3 crystal structures. In order to understand the molecular interactions that are responsible for the very fast crystal growth of the wild-type (WT) Spc-SH3 crystals, the crystal structure of a triple mutant in which the residues Ser19-Pro20-Arg21 in the RT loop have been replaced by Gly19-Asp20-Ser21 (GDS Spc-SH3 mutant) has been solved. The removal of the critical proline residue results in slower nucleation of the Spc-SH3 crystals and a different arrangement of the protein molecules in the unit cell, leading to a crystal that belongs to the tetragonal space group P4(1)2(1)2, with unit-cell parameters a = b = 42.231, c = 93.655 A, and that diffracts to 1.45 A resolution. For both WT Spc-SH3 and the GDS mutant, light-scattering experiments showed that a dimer was formed in solution within a few minutes of the addition of 2 M ammonium sulfate at pH 6.5 and allowed the proposal of a mechanism for the nucleation and crystal growth of Spc-SH3 in which the Pro20 residue plays a key role in the rate of crystal growth.

Evidence for conformational heterogeneity of fission protein Fis1 from Saccharomyces cerevisiae.

Fission 1 (Fis1) is an evolutionarily conserved, type II integral membrane protein implicated in maintaining the proper morphology of mitochondria and peroxisomes. A concave surface on the cytosolic domain of Fis1 from Saccharomyces cerevisiae is implicated in binding other fission proteins, yet structural studies reveal that this surface is sterically occluded by its N-terminal arm. Here we address the question of whether the N-terminal arm of yeast Fis1 exists in a dynamic equilibrium that would allow access to this functionally important surface. NMR measurements sensitive to dynamics occurring on a wide range of time scales (picoseconds to minutes) were used to assess whether the Fis1 arm is dynamic. Hydrogen-deuterium exchange experiments revealed that the Fis1 arm, alpha-helix 6, and proximal loops were not protected from solvent exchange, consistent with motions on the second to minute time scale. An engineered cysteine, I85C, located on the concave surface that lies underneath the Fis1 arm, was readily modified by a fluorescent probe, revealing more solvent accessibility of this position than would be predicted from the structure. Chemical denaturation, NMR chemical shift perturbation, and residual dipolar coupling experiments support the idea that the dynamic equilibrium can be shifted on the basis of changing pH and temperature, with the changes primarily localizing to the Fis1 arm and proximal regions. The data as a whole are consistent with the Fis1 arm adopting a primarily "closed" conformational state able to undergo dynamic excursions that reveal the concave surface and therefore may be important for binding other fission factors and for Fis1 function.

The high-resolution NMR structure of the R21A Spc-SH3:P41 complex: understanding the determinants of binding affinity by comparison with Abl-SH3.

BACKGROUND: SH3 domains are small protein modules of 60-85 amino acids that bind to short proline-rich sequences with moderate-to-low affinity and specificity. Interactions with SH3 domains play a crucial role in regulation of many cellular processes (some are related to cancer and AIDS) and have thus been interesting targets in drug design. The decapeptide APSYSPPPPP (p41) binds with relatively high affinity to the SH3 domain of the Abl tyrosine kinase (Abl-SH3), while it has a 100 times lower affinity for the alpha-spectrin SH3 domain (Spc-SH3). RESULTS: Here we present the high-resolution structure of the complex between the R21A mutant of Spc-SH3 and p41 derived from NMR data. Thermodynamic parameters of binding of p41 to both WT and R21A Spc-SH3 were measured by a combination of isothermal titration and differential scanning calorimetry. Mutation of arginine 21 to alanine in Spc-SH3 increases 3- to 4-fold the binding affinity for p41 due to elimination at the binding-site interface of the steric clash produced by the longer arginine side chain. Amide hydrogen-deuterium experiments on the free and p41-bound R21A Spc-SH3 domain indicate that binding elicits a strong reduction in the conformational flexibility of the domain. Despite the great differences in the thermodynamic magnitudes of binding, the structure of the R21A Spc-SH3:P41 complex is remarkably similar to that of the Abl-SH3:P41 complex, with only few differences in protein-ligand contacts at the specificity pocket. Using empirical methods for the prediction of binding energetics based on solvent-accessible surface area calculations, the differences in experimental energetics of binding between the two complexes could not be properly explained only on the basis of the structural differences observed between the complexes. We suggest that the experimental differences in binding energetics can be at least partially ascribed to the absence in the R21A Spc-SH3:P41 complex of several buried water molecules, which have been proposed previously to contribute largely to the highly negative enthalpy and entropy of binding in the Abl-SH3:P41 complex. CONCLUSION: Based on a deep structural and thermodynamic analysis of a low and high affinity complex of two different SH3 domains with the same ligand p41, we underline the importance of taking into account in any effective strategy of rational design of ligands, factors different from the direct protein-ligand interactions, such as the mediation of interactions by water molecules or the existence of cooperative conformational effects induced by binding.

Cooperative propagation of local stability changes from low-stability and high-stability regions in a SH3 domain.

Site-directed mutagenesis has been used to produce local stability changes at two regions of the binding site surface of the alpha-spectrin SH3 domain (Spc-SH3) differing in their intrinsic stability. Mutations were made at residue 56, located at the solvent-exposed side of the short 3(10) helix, and at residue 21 in the tip of the flexible RT-loop. NMR chemical-shift analysis and X-ray crystallography indicated negligible changes produced by the mutations in the native structure limited to subtle rearrangements near the mutated residue and at flexible loops. Additionally, mutations do not alter importantly the SH3 binding site structure, although produce significant changes in its affinity for a proline-rich decapeptide. The changes in global stability measured by differential scanning calorimetry are consistent the local energy changes predicted by theoretical models, with the most significant effects observed for the Ala-Gly mutations. Propagation of the local stability changes throughout the domain structure has been studied at a per-residue level of resolution by NMR-detected amide hydrogen-deuterium exchange (HX). Stability propagation is remarkably efficient in this small domain, apparently due to its intrinsically low stability. Nevertheless, the HX-core of the domain is not fully cooperative, indicating the existence of co-operative subunits within the core, which is markedly polarized. An equilibrium phi-analysis of the changes in the apparent Gibbs energies of HX per residue produced by the mutations has allowed us to characterize structurally the conformational states leading to HX. Some of these states resemble notably the folding transition state of the Spc-SH3 domain, suggesting a great potential of this approach to explore the folding energy landscape of proteins. An energy perturbation propagates more effectively from a flexible region to the core than in the opposite direction, because the former affects a broader region of the energy landscape than the latter. This might be of importance in understanding the special thermodynamic signature of the SH3-peptide interaction and the relevance of the dual character of SH3 binding sites.