RESUMO
This paper presents a detailed analysis of a micromachined thermopile detector featuring high responsivity and a versatile mosaic structure, based on 128 60 µm × 60 µm pixels connected in series and/or in parallel. The mosaic structure is based on the one employed for the thermal sensor known as TMOS, which consists of a CMOS-SOI transistor embedded in a suspended and thermally isolated absorbing membrane, released through microelectro mechanical system (MEMS) post-processing. Two versions of the thermopile detector, featuring different series/parallel connections, are presented and were experimentally characterized. The most performant of the two achieved 2.7 × 104 V/W responsivity. The thermopile sensors' performances are compared to that of the TMOS sensor, adopting different configurations, and their application as proximity detectors was verified through measurements.
RESUMO
This paper presents a sensor-readout circuit system suitable for presence detection. The sensor consists of a miniaturized polysilicon thermopile, realized employing MEMS micromachining by STMicroelectronics, featuring a responsivity value equal to 180 V/W, with 13 ms response time. The readout circuit is implemented in a standard 130-nm CMOS process. As the sensor output signal behaves substantially as a DC, the interface circuit employs the chopper technique in order to minimize offset and noise contributions at low frequency, achieving a measured input referred offset standard deviation equal to 1.36 µ V. Measurements show that the presented system allows successfully detecting the presence of a person in a room standing at 5.5 m from the sensor. Furthermore, the correct operation of the system with moving targets, considering people either walking or running, was also demonstrated.